TECH z EU-R-8 Chav Regulator Binary

CEEBTOOM CEEB TOOM

TECH lub tuam txhab ua kom tus neeg yuav khoom ua haujlwm zoo ntawm lub cuab yeej rau lub sijhawm 24 lub hlis txij li hnub muag. Tus Guarantor lees paub los kho lub cuab yeej dawb yog tias qhov teeb meem tshwm sim los ntawm qhov chaw tsim khoom ua txhaum. Cov cuab yeej yuav tsum raug xa mus rau nws cov chaw tsim khoom. Cov ntsiab cai ntawm kev coj ua thaum muaj kev tsis txaus siab yog txiav txim los ntawm Txoj Cai ntawm cov ntsiab lus tshwj xeeb thiab cov xwm txheej ntawm kev muag khoom thiab kev hloov pauv ntawm Civil Code (Journal of Laws of 5 September 2002).

CEEB TOOM!
Lub ntsuas kub tsis tuaj yeem nkag rau hauv ib qho kua (OIL ETC). Qhov no tuaj yeem ua rau kev puas tsuaj rau tus neeg saib xyuas thiab kev lav phib xaub! COV NYIAJ NYIAJ NYIAJ NYIAJ KHWV NYIAJ NTAWM LUB TSEV KAWM NTAWV ENVIRONMENT yog 5÷85% REL.H. TSIS TXAUS SIAB CONDENSATION EFFECT.

LUB CHAW UA HAUJ LWM YUAV TSUM UA LI CAS RAU COV MENYUAM.
Cov dej num cuam tshuam txog kev teeb tsa thiab kev tswj hwm ntawm cov tswj tsis tau piav qhia hauv Phau Ntawv Qhia thiab cov khoom hnav thaum lub sijhawm ua haujlwm ib txwm muaj, xws li fuses, tsis suav nrog kev kho vaj tse. Lub warranty tsis them rau kev puas tsuaj tshwm sim los ntawm kev ua haujlwm tsis raug lossis los ntawm tus neeg siv qhov txhaum, kev puas tsuaj los yog kev puas tsuaj tsim los ntawm hluav taws, dej nyab, huab cua tawm, overvol.tage, los yog luv luv. Kev cuam tshuam ntawm qhov kev pabcuam uas tsis tau tso cai, kev kho kom zoo, kev hloov kho, thiab kev tsim kho kev hloov pauv ua rau poob ntawm Warranty. TECH controllers muaj cov ntsaws ruaj ruaj. Tshem tawm lub foob ua rau poob ntawm Warranty.

Tus nqi ntawm qhov kev pabcuam tsis raug cai hu rau qhov tsis xws luag yuav raug them los ntawm tus neeg yuav khoom nkaus xwb. Kev hu xov tooj tsis raug cai txhais tau tias yog hu rau tshem tawm qhov kev puas tsuaj uas tsis tshwm sim los ntawm Guarantor qhov txhaum thiab kev hu xov tooj suav tias tsis raug cai los ntawm kev pabcuam tom qab kuaj xyuas cov cuab yeej (xws li kev puas tsuaj ntawm cov cuab yeej los ntawm kev ua txhaum ntawm tus neeg siv khoom lossis tsis raug Warranty) , lossis yog hais tias lub cuab yeej muaj teeb meem tshwm sim vim li cas dag dhau ntawm lub cuab yeej.

Txhawm rau ua tiav cov cai tshwm sim los ntawm Warranty no, tus neeg siv yuav tsum, ntawm nws tus kheej tus nqi thiab pheej hmoo, xa cov cuab yeej mus rau Guarantor nrog rau daim ntawv lees paub kom raug (muaj, tshwj xeeb, hnub muag, lub tus neeg muag khoom kos npe thiab cov lus piav qhia ntawm qhov tsis xws luag) thiab cov ntaub ntawv muag khoom (daim ntawv txais nyiaj, VAT invoice, thiab lwm yam). Daim Npav Warranty yog tib lub hauv paus rau kev kho dawb xwb. Lub sijhawm kho kev tsis txaus siab yog 14 hnub. Thaum Daim Npav Warranty ploj lossis puas lawm, cov chaw tsim khoom tsis muab qhov sib npaug.

Kev nyab xeeb

Ua ntej siv lub cuab yeej thawj zaug tus neeg siv yuav tsum nyeem cov cai hauv qab no kom zoo zoo. Tsis ua raws li cov kev cai uas muaj nyob rau hauv phau ntawv no yuav ua rau tus kheej raug mob los yog kev puas tsuaj ntawm tus tswj. Cov neeg siv phau ntawv yuav tsum muab khaws cia rau hauv qhov chaw nyab xeeb rau kev siv ntxiv. Txhawm rau kom tsis txhob muaj xwm txheej thiab ua yuam kev, nws yuav tsum tau ua kom ntseeg tau tias txhua tus neeg siv lub cuab yeej tau paub txog lawv tus kheej nrog lub hauv paus ntsiab lus ntawm kev ua haujlwm nrog rau kev ruaj ntseg ntawm tus maub los. Yog tias lub cuab yeej yuav raug muag lossis muab tso rau hauv qhov chaw sib txawv, nco ntsoov tias tus neeg siv phau ntawv muaj nyob nrog lub cuab yeej kom txhua tus neeg siv tau nkag mus rau cov ntaub ntawv tseem ceeb ntawm lub cuab yeej. Cov chaw tsim khoom tsis lees txais lub luag haujlwm rau kev raug mob lossis kev puas tsuaj los ntawm kev tsis saib xyuas; yog li ntawd, cov neeg siv yuav tsum tau ua raws li qhov tsim nyog ntsuas kev nyab xeeb uas tau teev tseg hauv phau ntawv no los tiv thaiv lawv lub neej thiab khoom.

CEEB TOOM
Ib tus kws tshaj lij hluav taws xob tsim nyog yuav tsum nruab lub cuab yeej.

Peb tau cog lus los tiv thaiv ib puag ncig. Kev tsim cov khoom siv hluav taws xob ua rau muaj kev lav phib xaub ntawm kev muab pov tseg ib puag ncig kev nyab xeeb ntawm cov khoom siv hluav taws xob thiab cov khoom siv. Li no, peb tau nkag mus rau hauv ib daim ntawv teev tseg los ntawm Kev Tshawb Fawb Txog Kev Tiv Thaiv Ib puag ncig. Lub cim hla tawm ntawm cov khoom lag luam txhais tau hais tias cov khoom yuav tsis muab pov tseg rau hauv cov thawv pov tseg hauv tsev. Kev rov ua dua cov pov tseg yuav pab tiv thaiv ib puag ncig. Tus neeg siv yuav tsum tau hloov lawv cov khoom siv mus rau qhov chaw sau khoom uas txhua yam khoom siv hluav taws xob thiab hluav taws xob yuav rov ua dua tshiab.

Technical Data

• Qhov ntau ntawm chav tsev kub qhov chaw…………………………………….5-350C
• Fais fab mov ………………………………………………………………… 6V
• Kev siv hluav taws xob …………………………………………………… 0,7W
• Qhov tseeb ntawm kev ntsuas…………………………………………………… +/-0,50C
• Ntau zaus……………………………………………………………………………… 868MHz

Kev piav qhia

• EU-R-8z chav tswj hwm yog npaj rau kev koom tes nrog EU-L-8 sab nraud tswj.
• EU-R-8z chav tswj hwm tau teeb tsa hauv thaj chaw cua sov. Cov ntaub ntawv ntsuas kub xa los ntawm lawv mus rau tus tswj hwm sab nraud yog siv los tswj cov thermostatic li qub (los ntawm kev qhib lawv thaum chav tsev kub qis dhau thiab kaw lawv thaum lub ntsuas kub hauv chav ua ntej tau mus txog).

Qhov ntsuas kub tam sim no tau pom ntawm lub vijtsam LED. Tus neeg siv kuj tuaj yeem hloov qhov kub ntawm qhov preset mus tas li lossis rau lub sijhawm txwv ncaj qha los ntawm lub sensor.
Cov khoom siv tswj:

• LED zaub
• built-in kub sensor
• phab ntsa-mountable npog
• lub teeb sensor

Kev teeb tsa

Tus maub los yuav tsum tau nruab los ntawm tus neeg tsim nyog.

• CEEB TOOM
  Kev pheej hmoo ntawm kev tuag hluav taws xob los ntawm kev kov cov kev sib txuas nyob. Ua ntej ua haujlwm ntawm tus maub los hloov tawm lub hwj huam mov thiab tiv thaiv nws los ntawm kev hloov pauv tsis raug.
• CEEB TOOM
  Kev sib txuas tsis raug ntawm cov xov hlau yuav ua rau tus neeg tswj hwm puas tsuaj!

Yuav sau npe li cas rau chav tswj hwm hauv ib cheeb tsam tshwj xeeb

Txhua chav tswj hwm yuav tsum tau sau npe hauv ib cheeb tsam. Nkag mus rau EU-L-8 sab nraud tswj cov ntawv qhia zaub mov thiab xaiv Sensor nyob rau hauv submenu ntawm ib cheeb tsam muab (Zone/Registration/Sensor) - tom qab nias lub Registration icon, nias lub khawm kev sib txuas lus nyob rau hauv ib chav tsev regulator tso rau sab nraum qab ntawm lub sensor. Yog tias cov txheej txheem sau npe tau ua tiav tiav, EU-L-8 maub los zaub qhia cov lus tsim nyog thaum lub chav sensor zaub qhia "Scs". Nyob rau hauv cov ntaub ntawv ntawm kev ua yuam kev nyob rau hauv cov txheej txheem sau npe, lub chav sensor zaub qhia "Err".

Cov cai hauv qab no yuav tsum tau khaws cia hauv siab:

• ib zaug sau npe, lub sensor tsis tuaj yeem tsis tau sau npe, tab sis tsuas yog hloov tawm hauv cov ntawv qhia zaub mov ntawm EU-L-8 tus tswj hwm sab nraud los ntawm kev xaiv Hloov tawm hauv submenu ntawm thaj chaw muab.
• Yog hais tias tus neeg siv sim muab lub sensor rau thaj tsam uas lwm tus sensor twb tau muab, thawj lub sensor yuav tsis sau npe thiab nws tau hloov los ntawm qhov thib ob.
• yog tias tus neeg siv sim muab lub sensor uas twb tau muab tso rau hauv ib cheeb tsam sib txawv, lub sensor tsis tau sau npe los ntawm thawj cheeb tsam thiab sau npe rau hauv ib qho tshiab.

Nws muaj peev xwm los teeb tsa tus kheej pre-set kub qhov tseem ceeb thiab cov sij hawm txhua lub lim tiam rau txhua chav tswj hwm muab rau ib cheeb tsam. Cov kev teeb tsa yuav raug teeb tsa ob qho tib si hauv cov ntawv qhia zaub mov tseem ceeb ntawm EU-L-8 tus tswj hwm sab nraud (Cov ntawv qhia zaub mov tseem ceeb / Sensor) thiab ntawm www.emodul.eu (siv EU-505 lossis WiFi RS). Qhov ntsuas kub ua ntej kuj tseem tuaj yeem hloov kho ncaj qha los ntawm chav sensor siv PLUS thiab MINUS nyees khawm.

Kev piav qhia ntawm cov haujlwm muaj nyob hauv cov ntawv qhia zaub mov

Txhawm rau nkag mus rau cov ntawv qhia zaub mov, nias thiab tuav lub PLUS thiab MINUS nyees khawm. Siv PLUS thiab MINUS cov nyees khawm los mus rau ntawm cov ntawv qhia zaub mov.

1. Cal - Cov haujlwm no ua rau tus neeg siv tau view sensor calibration. Tom qab xaiv Cal muaj nuj nqi, lub vijtsam flashes rau 3 vib nas this thiab qhia txog tus nqi calibration.
2. Loc - Txoj haujlwm no ua rau tus neeg siv los qhib lub khawm xauv. Tom qab xaiv txoj haujlwm Loc, lub vijtsam flashes rau 3 vib nas this thiab koj raug nug yog tias koj xav qhib lub xauv (yog / tsis). Paub meej tias siv PLUS lossis MINUS khawm. Txhawm rau kom paub meej tias koj xaiv, tos 3 vib nas this. Thaum lub xauv tau qhib lawm, cov nyees khawm raug kaw cia li tom qab 10 vib nas this ntawm kev tsis ua haujlwm. Txhawm rau qhib, nias thiab tuav PLUS thiab MINUS tib lub sijhawm. Thaum Ulc tshwm ntawm qhov screen, cov nyees khawm tau qhib.
3. Def - Qhov kev ua haujlwm no ua rau tus neeg siv los kho lub Hoobkas nqis. Thaum Deffunction tau xaiv, lub vijtsam flashes rau 3 vib nas this, thiab koj raug nug yog tias koj xav rov qab kho lub Hoobkas nqis (yog / tsis). Xaiv siv PLUS lossis MINUS. Tos 3 vib nas this kom paub meej tias koj xaiv.
4. Ret - tawm hauv cov ntawv qhia zaub mov. Thaum Ret tau xaiv, lub vijtsam flashes rau 3 vib nas this thiab rov qab los ntawm cov ntawv qhia zaub mov mus rau lub vijtsam loj view.

Yuav ua li cas hloov lub pre-set kub

Qhov ntsuas kub ntawm thaj tsam ua ntej tuaj yeem hloov ncaj qha los ntawm R-8z chav sensor siv PLUS thiab MINUS nyees khawm.

Thaum lub sijhawm tswj tsis ua haujlwm, lub vijtsam tseem ceeb qhia txog thaj chaw kub tam sim no. Tom qab nias PLUS lossis MINUS, qhov ntsuas kub tam sim no hloov nrog qhov ntsuas kub ua ntej (tus lej yog flashing). Siv PLUS thiab MINUS tus neeg siv tuaj yeem kho tus nqi ntsuas kub ua ntej. Tom qab teeb tsa tus nqi xav tau tos rau 3 vib nas this - tom qab lub sijhawm no cov zaub qhia pom lub vaj huam sib luag los txiav txim siab ntev npaum li cas qhov chaw tshiab yuav tsum siv.

Cov sijhawm teem sijhawm tuaj yeem hloov kho:

• mus tas li - nias PLUS khawm kom txog thaum Con tshwm rau ntawm qhov screen (tus nqi pre-set yuav siv tau txhua lub sijhawm tsis hais lub sijhawm teem sijhawm)
• rau ib teev twg - nias PLUS lossis MINUS kom txog thaum lub sijhawm xav tau tshwm sim ntawm qhov screen piv txwv li 01h (tus nqi ua ntej yuav siv rau lub sijhawm teev tseg; tom qab ntawd, lub sijhawm teem sijhawm txhua lub limtiam yuav siv)
• yog tias tus nqi kub tau teev tseg hauv lub sijhawm teem sijhawm txhua lub limtiam yuav tsum siv, nias MINUS kom txog thaum lub vijtsam tso tawm OFF.

EU Kev Tshaj Tawm Txog Kev Ua Raws Cai

Ntawm no, peb tshaj tawm raws li peb lub luag haujlwm ib leeg uas R-8z tsim los ntawm TECH STEROWNIKI, lub taub hau-quartered hauv Wieprz Biała Droga 31, 34-122 Wieprz, ua raws li Cov Lus Qhia 2014/53/EU ntawm European Parliament thiab Council ntawm Lub Plaub Hlis 16. 2014 ntawm kev sib haum xeeb ntawm cov kev cai lij choj ntawm Cov Tswv Cuab hais txog kev ua lag luam ntawm cov khoom siv hauv xov tooj cua, Cov Lus Qhia 2009/125/EC tsim kom muaj lub hauv paus rau kev teeb tsa ecodesign cov cai rau cov khoom siv hluav taws xob nrog rau cov kev cai los ntawm MINISTRY OF ENTREPRENEURSHIP THIAB TECHNOLOGY ntawm 24 Lub Rau Hli 2019 hloov kho cov kev cai hais txog cov kev cai tseem ceeb raws li kev txwv tsis pub siv qee yam khoom phom sij hauv cov khoom siv hluav taws xob thiab hluav taws xob, ua raws cov lus qhia ntawm Cov Lus Qhia (EU) 2017/2102 ntawm European thiab Parliament. Pawg Sab Laj ntawm 15 Kaum Ib Hlis 2017 hloov kho Cov Lus Qhia 2011/65/EU txog kev txwv tsis pub siv qee yam khoom siv phom sij hauv cov khoom siv hluav taws xob thiab hluav taws xob (OJ L 305, 21.11.2017, p. 8). Rau kev ntsuam xyuas ua raws, cov qauv kev sib haum xeeb tau siv:

• PN-EN IEC 60730-2-9: 2019-06 art. 3.1a Kev nyab xeeb ntawm kev siv
• PN-EN 62479: 2011 art. 3.1 Kev nyab xeeb ntawm kev siv
• ETSI EN 301 489-1 V2.2.3 (2019-11) art.3.1b Electromagnetic compatibility
• ETSI EN 301 489-3 V2.1.1: 2019-03 art.3.1b Electromagnetic compatibility
• ETSI EN 300 220-2 V3.2.1 (2018-06) art.3.2 Siv tau zoo thiab sib koom ua ke ntawm xov tooj cua spectrum
• ETSI EN 300 220-1 V3.1.1 (2017-02) art.3.2 Siv tau zoo thiab sib koom ua ke ntawm xov tooj cua spectrum

Khob, 06.12.2018

Lub hauv paus loj:
ua ul. Biata Droga 31, 34-122 Wieprz

Kev Pabcuam:
ua ul. Skotnica 120, 32-652 Bulowice
xov tooj: +48 33 875 93 80
e-mail: serwis@techsterowniki.pl ib.

Cov ntaub ntawv / Cov ntaub ntawv

TECH z EU-R-8 Chav Regulator Binary [ua pdf] Tus neeg siv phau ntawv z EU-R-8 Chav Regulator Binary, z EU-R-8, Chav Regulator Binary, Regulator Binary, Binary

Cov ntaub ntawv

• Cov neeg siv phau ntawv