SENECA ZE-4DI-2AI-2DO Modbus TCP lossis IP Input lossis Output Module
CEEB TOOM THAWJ
- Lo lus WARNING ua ntej los ntawm lub cim qhia txog cov xwm txheej lossis kev ua uas ua rau tus neeg siv kev nyab xeeb muaj kev pheej hmoo. Lo lus ATTENTION ua ntej los ntawm lub cim qhia txog cov xwm txheej lossis kev ua uas tuaj yeem ua rau lub ntsuas hluav taws xob puas tsuaj lossis cov khoom siv txuas nrog.
- Lub warranty yuav dhau los ua qhov tsis muaj thiab tsis muaj nyob rau hauv qhov xwm txheej ntawm kev siv tsis raug lossis tampkoom nrog cov module lossis cov khoom siv los ntawm cov chaw tsim khoom raws li qhov tsim nyog rau nws txoj haujlwm raug, thiab yog tias tsis ua raws li cov lus qhia hauv phau ntawv no.
- CEEB TOOM: Cov ntsiab lus tag nrho ntawm phau ntawv no yuav tsum tau nyeem ua ntej ua haujlwm.
- Lub module yuav tsum tsuas yog siv los ntawm cov kws txawj hluav taws xob.
- Cov ntaub ntawv tshwj xeeb muaj nyob rau siv QR-CODE qhia nyob rau nplooj 1.
- Lub module yuav tsum tau kho thiab puas qhov chaw hloov los ntawm Tuam Tshoj.
- Cov khoom yog rhiab heev rau electrostatic tawm. Siv cov kev ntsuas tsim nyog thaum lub sijhawm ua haujlwm.
- Kev siv hluav taws xob thiab hluav taws xob pov tseg (tseem siv tau hauv European Union thiab lwm lub tebchaws nrog kev rov ua dua tshiab).
- Lub cim ntawm cov khoom lossis nws lub ntim qhia tias cov khoom yuav tsum tau muab tso rau hauv lub chaw sau khoom tso cai rov ua dua tshiab
hluav taws xob thiab hluav taws xob pov tseg.
Yog xav paub ntxiv
Tiv tauj xov xwm
- Kev txhawb nqa
- Cov ntaub ntawv khoom
MODULE LOJ
- Ib qho module qhov ntev LxHxD: 17.5 x 102.5 x 111 mm;
- Qhov hnyav: 110 g yog ';
- Enclosure: PA6, dub
- Ob chav module qhov ntev LxHxD: 35 x 102.5 x 111 mm;
- Qhov hnyav: 110 g yog ';
- Enclosure: PA6, dub
LED SIGNALS NTAWM HAIV NEEG (ZE-4DI-2AI-2DO / -P)
| LED STATUS Lub ntsiab lus | ||
| IP / PWR | ON | Module powered IP chaw nyob tau txais |
| IP / PWR | Flashing | Module powered tos IP chaw nyob los ntawm DHCP server / Profinet kev sib txuas lus |
| Tx/Rx | Flashing | Kev xa cov ntaub ntawv thiab txais tos ntawm tsawg kawg ib qho chaw nres nkoj Modbus |
| ETH TSO | Flashing | Pob ntawv kis tau tus mob ntawm Ethernet chaw nres nkoj |
| ETH LNK | ON | Ethernet chaw nres nkoj txuas |
| DI1, DI2, DI3, DI4 | Rau / Tawm | Cov xwm txheej ntawm cov tswv yim digital 1, 2, 3, 4 |
| DO1, UA 2 | Rau / Tawm | Cov xwm txheej ntawm cov zis 1, 2 |
| FAIL | Flashing | Outputs nyob rau hauv tsis ua hauj lwm |
LED SIGNALS ntawm Pem Hauv Ntej Vaj Huam Sib Luag (Z-4DI-2AI-2DO)
| LED | STATUS | Lub ntsiab lus |
| PWR | ON | Module powered |
| Tx/Rx | Flashing | Kev xa cov ntaub ntawv thiab txais tos tsawg kawg yog ib qho chaw nres nkoj Modbus: COM1, COM2 |
| DI1, DI2, DI3, DI4 | Rau / Tawm | Cov xwm txheej ntawm cov tswv yim digital 1, 2, 3, 4 |
| DO1, UA 2 | Rau / Tawm | Cov xwm txheej ntawm cov zis 1, 2 |
| FAIL | Flashing | Outputs nyob rau hauv tsis ua hauj lwm |
LED SIGNALS ntawm Pem Hauv Ntej Vaj Huam Sib Luag (ZE-2AI / -P)
| LED STATUS Lub ntsiab lus | ||
| IP / PWR | ON | Module powered thiab IP chaw nyob tau txais |
| IP / PWR | Flashing | Module powered tos IP chaw nyob los ntawm DHCP server / Profinet kev sib txuas lus |
| FAIL | ON | Yam tsawg kawg yog ib qho ntawm ob qho analogue inputs tawm ntawm qhov ntsuas (underscale-overscale) |
| ETH TSO | Flashing | Pob ntawv kis tau tus mob ntawm Ethernet chaw nres nkoj |
| ETH LNK | ON | Ethernet chaw nres nkoj txuas |
| Tx 1 | Flashing | Modbus pob ntawv kis tau tus mob los ntawm ntaus ntawv mus rau COM 1 chaw nres nkoj |
| Rx 1 | Flashing | Modbus pob ntawv txais tos ntawm COM 1 chaw nres nkoj |
| Tx 2 | Flashing | Modbus pob ntawv kis tau tus mob los ntawm ntaus ntawv mus rau COM 2 chaw nres nkoj |
| Rx 2 | Flashing | Modbus pob ntawv txais tos ntawm COM 2 chaw nres nkoj |
TECHNICAL SPECIFICATIONS
INSTALLATION REGULATIONS
Lub module tau tsim los rau ntsug installation ntawm DIN 46277 rail. Rau kev ua haujlwm zoo thiab lub neej ntev, yuav tsum muaj qhov cua txaus. Tsis txhob tso cov ducting los yog lwm yam khoom uas cuam tshuam lub qhov cua. Tsis txhob mounting modules tshaj cov khoom siv hluav taws xob. Kev txhim kho nyob rau hauv qab ib feem ntawm lub vaj huam sib luag hluav taws xob yog pom zoo.
CEEB TOOM
Cov no yog cov cuab yeej qhib rau kev teeb tsa hauv qhov kawg casing / vaj huam sib luag uas muaj kev tiv thaiv thiab kev tiv thaiv kev sib kis ntawm hluav taws.
ModBUS CONNECTION RULES
- Nruab cov modules hauv DIN rail (120 max)
- Txuas cov chaw taws teeb modules siv cov cables ntawm qhov ntev uas tsim nyog. Cov lus hauv qab no qhia cov ntaub ntawv ntev cable:
- Bus Length: Qhov ntev tshaj plaws ntawm Modbus network raws li Baud Rate. Qhov no yog qhov ntev ntawm cov cables uas txuas rau ob qhov chaw nyob deb tshaj plaws (saib daim duab 1).
- Derivation Length: Qhov ntev tshaj plaws ntawm qhov derivation 2 m (saib daim duab 1).
Rau qhov ua tau zoo tshaj plaws, nws raug nquahu kom siv cov kab thaiv tshwj xeeb, tsim tshwj xeeb rau kev sib txuas lus cov ntaub ntawv.
IDC10 CONNECTOR
Fais fab mov thiab Modbus interface muaj nyob rau siv Seneca DIN rail tsheb npav, ntawm IDC10 rear connector, los yog Z-PCDINAL-17.5 accessory.
Rov qab connector (IDC 10)
Daim duab qhia qhia lub ntsiab lus ntawm ntau yam IDC10 connector pins yog tias cov teeb liab yuav raug xa los ntawm lawv ncaj qha.
USB chaw nres nkoj (Z-4DI-2AI-2DO)
Lub module yog tsim los pauv cov ntaub ntawv raws li cov hom tau teev tseg los ntawm MODBUS raws tu qauv. Nws muaj micro USB connector thiab tuaj yeem teeb tsa siv cov ntawv thov thiab / lossis software program. USB serial chaw nres nkoj siv cov kev sib txuas lus hauv qab no: 115200,8,N,1
Qhov chaw nres nkoj USB kev sib txuas lus coj zoo ib yam li ntawm RS485 lossis RS232 tsheb npav tshwj tsis yog rau cov kev sib txuas lus.
TIV THAIV DIP-SWITCHES
CEEB TOOM
DIP-switch settings tsuas yog nyeem thaum lub sijhawm khau raj. Thaum txhua qhov kev hloov pauv, ua qhov pib dua.
SW1 DIP-SWITCH:
Los ntawm DIP-SWITCH-SW1 nws tuaj yeem teeb tsa tus IP teeb tsa ntawm lub cuab yeej:
CAUTO
- Qhov twg tam sim no, DIP3 thiab DIP4 yuav tsum tau teem rau OFF.
- Yog tias teeb tsa txawv, qhov ntsuas yuav tsis ua haujlwm raug
RS232 / RS485 kev teeb tsa:
RS232 lossis RS485 teeb tsa ntawm terminals 10 -11 -12 (serial chaw nres nkoj 2)
WEB KEV PAB
- Nkag mus rau kev saib xyuas Web Server nrog lub Hoobkas IP chaw nyob 192.168.90.101 nkag mus: http://192.168.90.101
- Default user: admin, Default password: admin.
CEEB TOOM
Tsis txhob siv cov khoom siv nrog tib tus IP chaw nyob hauv tib lub network ETHERNET.
Kev sib txuas hluav taws xob
Ceeb Toom: Cov kev txwv lub hwj chim sab saud yuav tsum tsis pub tshaj, vim qhov no yuav ua rau muaj kev puas tsuaj loj rau lub module.
Yuav kom ua tau raws li cov cai ntawm electromagnetic immunity:
- siv cov kab hluav taws xob tiv thaiv;
- txuas cov ntaub thaiv npog rau ib qho kev nyiam instrumentation ntiaj teb system;
- cais cov cables los ntawm lwm cov cables siv rau kev teeb tsa hluav taws xob (transformers, inverter, motors, induction ncu, thiab lwm yam ...).
POWER SUPPLY
- Cov khoom siv hluav taws xob txuas nrog terminals 2 thiab 3.
- Cov khoom siv voltage yuav tsum nyob nruab nrab ntawm:
11 thiab 40Vdc (tsis muaj polarity), lossis nruab nrab ntawm 19 thiab 28 Vac. - Cov khoom siv hluav taws xob yuav tsum raug tiv thaiv los ntawm kev ua haujlwm tsis zoo ntawm lub module los ntawm ib qho kev ruaj ntseg fuse.
ANALOGUE INPUTS
DIGITAL INPUTS (tsuas yog ZE-4DI-2AI-2DO thiab Z-4DI-2AI-2DO)
DIGITAL OUTPUTS (tsuas yog ZE-4DI-2AI-2DO thiab Z4DI-2AI-2DO)
COM2 SERIAL PORT
Cov ntaub ntawv / Cov ntaub ntawv
 |
SENECA ZE-4DI-2AI-2DO Modbus TCP lossis IP Input lossis Output Module [ua pdf] Phau ntawv qhia ZE-4DI-2AI-2DO, ZE-4DI-2AI-2DO-P, Z-4DI-2AI-2DO, ZE-2AI, ZE-2AI-P, ZE-4DI-2AI-2DO Modbus TCP lossis IP Input lossis Output Module, Modbus TCP los yog IP Input lossis Output Module, TCP lossis IP Input lossis Output Module, IP Input lossis Output Module, Input lossis Output Module, Module |
