SL-905 Indicator
Tus neeg siv phau ntawvwww.selletonscales.com

SAFETY CEEB TOOM

Rau kev nyab xeeb ntawm qhov ntsuas qhov hnyav, thov ua raws li cov lus qhia no:

• Calibration tshuaj xyuas thiab kev saib xyuas ntawm qhov ntsuas yog txwv los ntawm cov neeg ua haujlwm tsis yog neeg ua haujlwm
• Thov xyuas kom meej tias qhov ntsuas tau nyob ntawm qhov chaw ruaj khov
• Qhov taw qhia yog ib daim ntawm cov khoom siv zoo li qub; Thov txiav hluav taws xob thaum muaj hluav taws xob sib txuas
• Kov cov khoom sab hauv los ntawm tes yog txwv tsis pub
• Tsis txhob tshaj qhov ntsuas load txwv ntawm chav tsev
• TSIS TXAUS SIAB rau ntawm chav tsev
• Tsis txhob dhia ntawm qhov ntsuas
• Tsis txhob siv cov khoom no yog tias ib qho ntawm cov khoom tawg
• Tsis txhob siv rau lub hom phiaj lwm yam ces hnyav noj
• Txhawm rau kom tsis txhob ua rau lub roj teeb puas, tsis txhob muab lub charger ntsaws rau hauv ib zaug thaum lub roj teeb tau them tag nrho
• Xyuas kom tseeb tias qhov hnyav tsis dhau lub peev xwm Max vim nws tuaj yeem ua rau cov khoom thauj hauv lub cell puas
• Cov khoom uas muaj hluav taws xob zoo li qub tuaj yeem cuam tshuam qhov hnyav. Tshem tawm cov hluav taws xob zoo li qub ntawm samples, yog ua tau. Lwm qhov kev daws teeb meem yog los so ob sab ntawm lub lauj kaub thiab sab saum toj ntawm rooj plaub nrog tus neeg sawv cev tiv thaiv zoo li qub

Thov siv cov kev tiv thaiv zoo li qub
Txhua qhov kev them nqi ntawm lub cev ntawm tib neeg tus neeg teb xov tooj yuav tsum raug tso tawm ua ntej qhib lub thawv tiv thaiv nrog ESDS cov khoom siv sab hauv. Kev tso tawm tuaj yeem ua tiav los ntawm:

• Muab ib txhais tes rau ntawm qhov chaw hauv av los yog, qhov zoo tshaj plaws, los ntawm kev hnav ib qho av Anti-static Wrist Strap thiab Anti-static Mat

Kev npaj & teeb tsa

• Txuas rau hauv lub qhov hluav taws xob phab ntsa kom tsis txhob cuam tshuam nrog lwm cov xov hlau
• Qhib qhov ntsuas thaum tsis muaj load
• Calibration tej zaum yuav xav tau ua ntej hnyav thaum lub ntsuas tau pib nruab lossis txav los ntawm qhov chaw

NTA

Haum rau lub rooj ntev zaum, nplai hauv pem teb thiab cov nplai tsheb, qhov taw qhia no ua haujlwm nrog 32-ntsis CPU thiab 24-ntsis siab ADC. Nws yog ua los ntawm Stainless Hlau Housing. Kev ua tau zoo heev ua rau nws tsim nyog rau kev ua haujlwm sib txawv. Waterproof connector thiab cable txuas tsau sab hauv.

• Ntau qhov hnyav: (lb / kg)
• Gross/Tare/Pre-set Tare/Zero
• Muaj nuj nqi tuav
• Suav qhov hnyav
• Kev hnyav hnyav
• Txheeb xyuas qhov hnyav
• Overload / Underload qhia
• Txuas rau lub tshuab luam ntawv
• Splash pov thawj keyboard thiab zaub
• Txuas mus rau Chaw Taws Teeb Pom Kev / Scoreboard
• Lub zog txuag hom
• tuaj yeem txuas rau PC lossis lub tshuab luam ntawv rau kev sau cov ntaub ntawv (yeem)
• Wireless muaj peev xwm (yeem)
• 20mm Letter LED zaub
• Rechargeable roj teeb
• RS232 tso zis

Technical Parameters

• Chav kawm raug: 5000 e
• Kev daws teeb meem - Zaub: 30,000; PIB: 2,000,000
• Zero stability yuam kev: TK0 <0.1μV//K
• Span stability yuam kev: TKspn < ± 6 ppm//K
• rhiab heev (sab hauv): 0.3 μV / d
• Cov lus qhia voltage: -30 rau + 30mV DC
• Excitation Circuit Court: 5 VDC, 4 xaim kev twb kev txuas, 12 load cell ntawm 350ohm max
• AC zog: AC 110V
• Roj teeb 6V4Ah
• Ua haujlwm kub: -10 ° C ~ + 40 ° C
• Ua haujlwm av noo: ≤ 85% RH
• Cia kub: -40 ° C ~ + 70 ° C (32-104 ° F)
• Qhov hnyav: 7 lbs (3.2 kg)
• Qhov Loj: 11.25 "x 4" x 9.5" (260x160x80mm)

SPECIFICATIONS

DAIM 1: QHOV CHAW UA HAUJ LWM

POWER SUPPLY

AC Adapter
Peb pom zoo kom ntsaws rau hauv lub qhov hluav taws xob phab ntsa kom tsis txhob cuam tshuam nrog lwm cov xov hlau.
Roj teeb
Thov them lub roj teeb sab hauv ua ntej siv thawj zaug. Txhawm rau kom lub roj teeb nyob rau hauv qhov zoo tshaj plaws, tso tawm lub roj teeb tag nrho txhua lub hlis los ntawm kev tawm ntawm qhov taw qhia kom txog thaum lub ntsuas hluav taws xob tawm, thiab tom qab ntawd rov them tag nrho. Yog tias lub roj teeb yuav tsis siv rau lub sijhawm ntev, nws raug nquahu kom tshem nws kom tsis txhob xau.

• Thaum lub roj teeb qis, lub roj teeb qhia lub teeb flashes liab
• Thaum them lub teeb liab yuav nyob twj ywm
• Lub teeb yuav tig ntsuab ib zaug them tag nrho

SL-905 (LED)
Keyboard thiab Display

DISPLAY THIAB KEY DESCRIPTION

	Tuav qhov hnyav ntawm qhov teev nyob ntawm qhov kev teeb tsa parameter
	Hloov ntawm qhov hnyav units
	Tshawb xyuas cov ntaub ntawv los ntawm tus lej
	Sau cov ntaub ntawv hnyav
	Hauv hom tag nrho: tau qhov hnyav tare Hauv net hom: tshem cov tare, tau qhov Gross
	Tshem tawm cov ntaub ntawv hnyav dhau los thiab cov ntaub ntawv khaws tseg
	Siv cov nplai los suav cov khoom raws liample pes
	Rov qab mus rau qhov hnyav
	1. Zero tus nplai. Siv thaum siv lub thawv ntim khoom 2. Tshem tawm cov tare kom pom qhov hnyav tag nrho
	Zero yog qhov ntsuas
	Txheeb xyuas qhov kev txiav txim
	Powers tus taw qhia On lossis Off yog tuav rau 2 vib nas this
	Clear cov tswv yim
	Paub meej cov tswv yim
	Qhov ntsuas yog nyob zero
	Qhov ntsuas yog ruaj khov
Tag nrho	Qhia tau tias koj nyob hauv hom hnyav hnyav (nrog rau tare); default hom
Net	Qhia tias koj nyob hauv Net nyhav hom (qhov hnyav tsis hnyav hnyav)
Tuav	Qhia tau tias koj nyob hauv Tuav hom
Tag nrho	Qhia tau tias koj nyob rau hauv Accumulation hom
Pcs	Qhia tau tias koj nyob hauv suav hom
LB	Qhov hnyav yog qhia hauv phaus
KG	Qhov hnyav yog qhia hauv kilograms
Roj teeb	Flashes liab = tsawg roj teeb, Khoom liab = them, Ntsuab = tag nrho them
Tshaj	Flashes thaum qhov hnyav siab dua qhov ntsuas ntsuas ntsuas
Txais	Flashes thaum qhov hnyav yog nyob rau hauv lub teeb tsa lub tswb ntsuas
Hauv qab	Flashes thaum qhov hnyav qis dua qhov ntsuas ntsuas ntsuas

Cov lus qhia ua haujlwm

Hwj chim On

• Tig lub zog los ntawm nias lub pob ON / OFF rau 2 vib nas this. Thaum nyob rau, lub scale yuav flash lub voltage thiab tom qab ntawd pib pib-kuaj xyuas thiab suav los ntawm 0-9 ua ntu zus ua ntej nkag mus rau hom hnyav
  Nco tseg: Txhua yam ntawm qhov ntsuas ua ntej lub hwj chim yuav cia li raug tared tawm.

Xoom

• Lub zero muaj nuj nqi tsuas yog siv thaum lub teev yog khoob thiab tsis yog xoom vim yog cov khoom tsim
• Nias tus yuam sij ZERO thaum lub teev ruaj khov yuav rov pib koj qhov ntsuas rau 0
• Nyob ntawm seb koj phau ntawv xoom ntau yam tsis raug teeb tsa rau, koj tuaj yeem xoom tawm qhov hnyav hauv koj qhov kev xaiv, tom qab ntawd koj yuav tau txais qhov yuam kev thiab yuav tsum tau tare tawm qhov hnyav.

Chav Xaiv

• Txhawm rau hloov ntawm cov ntsuas ntsuas (kg / lb) nias lub khawm UNITS

Tare muaj nuj nqi
Rau Tare: Thaum nyob rau hauv tag nrho cov hom, nias TARE nkag mus rau net hom thiab tare tawm qhov hnyav

• Tare muaj nuj nqi yog siv thaum koj tsuas xav pom qhov kev hloov pauv tam sim no hauv qhov hnyav, tsis yog tag nrho qhov hnyav ntawm qhov ntsuas.
• Thaum qhov taw qhia yog nyob rau hauv tag nrho hom (tag nrho cov teeb pom kev zoo) nias lub TARE tus yuam sij yuav Tare tus luj tam sim no ntawm lub teev thiab nkag mus rau hauv net hom (net teeb pom kev)
• Rau example yog tias koj siv lub thawv ntxiv lub thawv rau qhov teev, nias tare thiab cov zaub yuav qhia lub cim tare thiab rov qab mus rau 0
• Ntxiv koj cov khoom mus rau qhov ntsuas kom hnyav yam tsis muaj qhov hnyav ntawm lub thawv
• Txhawm rau tawm Tare hom nias lub pob TARE dua kom nkag mus rau hom tag nrho thiab koj yuav pom tag nrho qhov hnyav ntawm lub thawv thiab cov khoom.

Nco tseg: Yog tias koj tshem lub thawv, qhov ntsuas yuav qhia qhov hnyav ntawm lub thawv
Txhawm rau siv pre-set tare hnyav

• Nias thiab tuav tus yuam sij TARE thiab SET tus yuam sij tib lub sijhawm
• Nkag mus rau qhov hnyav koj xav tau tared ntawm lub keyboard
• Nias TARE tus yuam sij kom paub meej
• Nias TARE kom rov qab mus rau 0

Kev khaws cia

• Cov kev ua tau zoo yog siv los ntxiv ntau qhov hnyav thiab tag nrho lawv ua ke
• Koj tuaj yeem ntxiv txog 999 qhov hnyav sib txawv ua ke
• Nyob rau hauv hom hnyav load thawj qhov hnyav, ib zaug ruaj khov nias TOTAL tus yuam sij kom nkag mus rau hauv hom sib sau. Lub teeb "tag nrho" yuav pom
• Tshem tawm thawj qhov hnyav thiab ntxiv qhov hnyav thib ob rau qhov ntsuas
• Thaum ruaj khov nias TOTAL tus yuam sij ntxiv qhov hnyav rau tag nrho cov khoom
• Rov ua cov kauj ruam dhau los kom txog rau thaum tag nrho qhov xav tau qhov hnyav tau ntxiv rau tag nrho (max 999 zaug)
• Thaum koj ua tiav thiab xav tso saib tag nrho cov khoom sau, nias TOTAL thiab SET yuam sij ua ke. Tus lej suav "n###" (tus naj npawb ntawm qhov hnyav koj ntxiv ua ke) yuav nyem rau ntawm cov zaub ua raws li tag nrho
• Yog tias koj xav luam tag nrho cov ntawv sau, tuav tus yuam sij PRINT rau ib pliag
• Txhawm rau tawm ntawm hom kev sib sau, nias tus yuam sij ESC
• Txhawm rau tshem tawm qhov hnyav uas tau khaws tseg, nias lub pob DEL ua raws li tus yuam sij teeb tsa kom paub meej
• Rov ua cov txheej txheem no kom tshem tawm txhua qhov hnyav uas tau khaws tseg

Luam tawm

• Yog tias qhov ntsuas tau txuas nrog lub tshuab luam ntawv thiab qhov hnyav ntawm qhov ntsuas tau ruaj khov, nias lub khawm PRINT los luam tawm qhov hnyav tam sim no

Nco tseg: Hauv hom tare lub tshuab luam ntawv tsis tuaj yeem luam tawm yog tias qhov hnyav tsis zoo pom
Suav Function

• Kev suav suav yog siv los suav cov ntim siab ntawm cov khoom zoo ib yam. Koj tuaj yeem ua qhov no los ntawm kev teeb tsaample thiab tom qab ntawd ntxiv rau sample los yog tshem tawm ntawm sample suav cov khoom ntawm qhov ntsuas
• Hauv hom hnyav: nias COUNT kom nkag mus suav hom
• Tom qab ntawd nias COUNT thiab SET tib lub sijhawm los teeb tsa koj lub sample nrog keypad
• (ex. Yog tias koj suav cov xaum, koj yuav ntxiv liample ntawm xaum rau qhov teev, yog tias koj ntxiv 50 xaum rau qhov teev koj yuav nkag mus rau 50 ntawm lub keyboard.)
• Xovxwm ntawm lub keyboard los teeb koj sample
• Tam sim no qhov ntsuas tau npaj pib suav, thauj koj cov khoom ntawm qhov ntsuas thiab qhov ntsuas yuav qhia qhov ntau
• (piv txwv li yog tias koj ntxiv 450 xaum rau koj lub sample ntawm 50, qhov ntsuas yuav nyeem 500 cwj mem)
• Txhawm rau pom qhov hnyav ntawm qhov ntsuas nias COUNT
• Txhawm rau tawm hauv suav hom, nias lub pob ESC
• Yog tias koj xav suav cov khoom sib txawv tuav COUNT thiab SET yuam sij ua ke kom nkag mus rau s tshiabample

Tuav
Muaj 4 qhov sib txawv tuav haujlwm koj tuaj yeem xaiv los ntawm hauv C11 parameter

1. Peak Hold: Grabs qhov hnyav tshaj plaws (rau cov khoom kuaj, piv txwv li. nro thiab rub quab yuam)
   ● Nias tus yuam sij HOLD ces ntxiv qhov hnyav rau qhov teev
   ● Qhov taw qhia yuav qhia qhov hnyav tshaj plaws uas nws tau sau tseg thiab tuav nws ntawm qhov screen kom txog thaum qhov hnyav dua muab tso rau ntawm qhov ntsuas
2. Kev tuav tuav: tuav qhov hnyav tam sim no thiab tuav nws kom nws tsis hloov / hloov pauv
   ● Thaum uas hnyav, nias HOLD thiab qhov taw qhia yuav tuav qhov hnyav tam sim no ntawm lub vijtsam kom txog thaum HOLD raug nias dua
3. Nws pib tuav: Yog tias qhov hnyav ntawm qhov ntsuas siab tshaj 20d (20 x faib) thiab ruaj khov, qhov taw qhia yuav tuav qhov hnyav ntawm qhov screen rau 3 vib nas this ces rov qab mus rau qhov hnyav.
   ● Nias tus yuam sij tuav yog qhov tsis tsim nyog, tuav yog ua tiav thaum lub teev ruaj khov
4. Average Hold: Siv rau tsiaj hnyav, qhov taw qhia yuav pom qhov hnyav nruab nrab sampcoj los ntawm 3 vib nas this

Daim ntawv qhia
Daim ntawv qhia tso cai rau koj khaws cov qauv rau cov khoom sib txawv uas koj tuaj yeem ua qhov hnyav, thiab tsim txoj hauv kev yooj yim los ua kom koj qhov hnyav.
Rau example: Yog tias koj muag 2 lb hnab ntawm cherries, koj yuav tsim ib daim ntawv qhia los ntawm kev teeb tsa kev kam rau siab siv lub siab thiab qis. Qhov kev zam no tso cai rau koj kom ceev nrooj cais ntau 2 lb hnab cherries. Rau qhov no example peb yuav siv 0.1 lbs. Lub ntsiab lus peb yuav teem peb lub siab txwv rau 2.10 lbs thiab peb qis qis li 1.90 lbs. Peb tab tom qhia cov nplai, tias qhov hnyav npaum li cas tawm ntawm lub thawv ntawm 1.9 lbs - 2.1 lbs yog qhov siv tau, txhua yam siab dua lossis qis dua tsis yog. Tam sim no hais tias peb daim ntawv qhia tau teeb tsa ntxiv koj lub thawv loj ntawm cherries ntawm qhov ntsuas. Tom qab ntawd tare tawm koj lub thawv ntawm cherries, teem lub teev rau 0. Tam sim no yog hais tias koj pib scooping tawm cherries los ntawm lub thawv rau hauv ib lub hnab, lub teev yuav nyeem nyob rau hauv tsis zoo (ex. -1.5 lbs) kom txog thaum tus nqi teev nyob rau hauv peb daim ntawv qhia mus txog. . hen koj tau tshem tawm ~ 2 lbs (dab tsi koj kam rau ua) lub teev yuav rov qab mus rau 0. Tom qab ntawd cov txheej txheem tuaj yeem rov ua dua, tshem tawm ~ 2 lbs ntawm cov txiv ntoo kom txog thaum ntsuas ntsuas 0.
Txhawm rau teeb tsa cov qauv no:

1. Nias SET, lub vijtsam yuav qhia tias koj nyob hauv daim ntawv qhia dab tsi, lub neej ntawd yog 1. Yog tias nws tsis nyob rau ntawm 1, siv lub keyboard los nkag rau daim ntawv qhia tus lej koj xav teem. (txog 99 daim ntawv qhia tuaj yeem khaws cia)
2. Nias # kom paub meej tias tus lej ntawd
3. Tam sim no koj yuav rov qab rau hauv qhov hnyav hom qhov screen yuav qhia 0
4. Nias SET thiab ESC tib lub sijhawm kom nkag mus rau hom kev teeb tsa
5. siv lub keypad los nkag 13 ua raws li # kom paub meej
6. Siv lub keypad kom nkag mus rau koj qhov Kev Txwv Saum, ua raws li # kom paub meej (piv txwv li 2.10)
7. Lub vijtsam yuav qhia C14, nias # nkag mus rau qhov chaw teeb tsa no
8. Siv lub keyboard kom nkag mus rau koj qhov Kev Txwv qis, ua raws li tus yuam sij # kom paub meej (piv txwv li 1.90)
9. Lub vijtsam yuav qhia C15, nias ESC kom txuag thiab rov qab mus rau qhov hnyav hom
10. Tom qab ntawd tso koj lub thawv rau ntawm qhov teev, Qhov screen yuav qhia koj qhov hnyav tag nrho
11. Nias TARE los teeb qhov ntsuas rov qab rau 0
12. Tom qab nias tare koj muaj peev xwm tshem tawm cov khoom ntawm lub teev kom txog thaum koj nyob rau hauv koj lub siab ntev thiab teev nyeem 0. (ex. 1.9 - 2.1 lbs)

Txhawm rau siv cov qauv uas twb muaj lawm:

1. Hauv hom kev hnyav, nias SET, ua raws li tus lej daim ntawv qhia tau txais kev cawmdim hauv qab
2. Nias # kom paub meej
3. Ntxiv koj cov khoom rau qhov ntsuas, Tom qab ntawd nias TARE
4. Tam sim no koj tuaj yeem pib tshem tawm cov khoom lag luam thiab qhov ntsuas yuav nyeem 0 thaum nws nyob rau hauv lub teeb kam rau ua
5. Txhawm rau hloov cov zaub mov txawv, nias SET ua raws li tus lej daim ntawv qhia tau txais kev cawmdim hauv qab

CALIBRATION TEEB MEEM

1. Tig rau qhov ntsuas los tuav ON / OFF .
2. Xovxwm thiab ua ke kom nkag mus rau qhov teeb tsa zaub mov.
3. Yog tias ua tiav lawm, cov zaub yuav tsum tam sim no qhia
4. Xovxwm nkag mus rau C1 channel. Cov zaub yuav tsum qhia .
5. Ntawm lawv cov keyboard nkag mus rau chav tsev twg koj xav ntsuas hauv (1 = kg, 2 = lb).
6. Xovxwm txuag koj tus nqi. Cov zaub yuav tam sim no qhia
7. Xovxwm nkag mus rau C2 channel. Cov zaub yuav tsum qhia
8. Siv cov keypad nkag mus rau qhov chaw rau cov zauv qhov xav tau (C2 channel yog siv los kho tus lej ntawm tus lej. Tus nqi ntawm 1 txhais tau tias muaj ib tus lej tom qab tus lej lej 1 = 0.0, tus nqi ntawm 2 = 0.00)
9. Ntawm lawv keypad teem koj tus nqi. Cov zaub yuav tam sim no qhia
10. Xovxwm nkag mus rau C3 channel. Cov zaub yuav tsum qhia
11. Ntawm lawv keypad sau tus nqi ntawm koj qhov kev kawm tiav.
    (C3 channel kho qhov kev faib tawm ntawm qhov ntsuas. Tus nqi ntawm 1 xaiv thiab C2 teem rau 1, qhov ntsuas yuav nyeem hauv 0.1 lb. increments.)
12. Xovxwm teem koj tus nqi. Cov zaub yuav tam sim no qhia
13. Xovxwm nkag mus rau C4 channel. Cov zaub yuav qhia .
14. Ntawm lawv cov keyboard nkag mus rau qhov siab tshaj plaws uas koj xav siv rau koj qhov teev.
    (Lub C4 channel yog siv los nkag rau hauv lub peev xwm siab tshaj plaws ntawm qhov teev; xyuas kom tseeb tias tus lej koj nkag tsis tshaj qhov max peev xwm ntawm koj qhov teev.)
15. Xovxwm teem koj tus nqi. Cov zaub yuav tam sim no qhia
16. Xovxwm nkag mus rau C5 channel. Cov zaub yuav tsum qhia
17. C5 channel calibrates xoom ntawm qhov ntsuas. Xyuas kom tseeb tias qhov ntsuas yog qhov khoob.
18. Nias 1 ntawm lub keypad kom hloov tus nqi mus rau 1.
19. Xovxwm mus rau xoom calibrate. Cov zaub yuav suav los ntawm 10-1 thaum lub ntsuas ntsuas ntsuas. Thaum cov zaub qhia 0 xoom calibration tiav.
20. Xovxwm mus txuas ntxiv. Cov zaub yuav tam sim no qhia
21. Xovxwm nkag mus rau C06 channel. Cov zaub yuav qhia .
22. C6 channel yog siv los ntsuas qhov ntsuas nrog qhov paub qhov hnyav. Nias 1 ntawm lub keyboard los teeb tsa tus nqi ntawm C6 rau .
23. Xovxwm mus txuas ntxiv. Cov zaub yuav flash , thiab ces qhia .
24. Nyob rau ntawm lub keypad nkag mus rau qhov hnyav ntawm qhov ntsuas qhov hnyav koj yuav siv (yuav tsum yog tsawg kawg 10% ntawm koj lub peev xwm max koj teem rau hauv C04.
25. Muab koj qhov hnyav calibration rau ntawm qhov ntsuas khoob thiab .
26. Qhov ntsuas yuav suav los ntawm 10 mus rau 0. Thaum 0 tau mus txog, cov zaub yuav pom .
27. Xovxwm mus ntxiv. Cov zaub yuav tam sim no qhia
28. Xovxwm txuag thiab tawm ntawm cov zaub mov teeb tsa.
29. Qhov ntsuas tau tam sim no tau calibrated. Cov zaub yuav qhia tus nqi ntawm qhov ntsuas qhov hnyav ntawm qhov ntsuas.
30. Yog tias qhov ntsuas tsis qhia tus nqi ntawm qhov ntsuas qhov hnyav, xyuas kom cov ko taw ntawm lub platform tsis screwed nruj heev, thiab xyuas kom meej tias lub platform yog theem.
31. Tshem tawm qhov ntsuas; cov zaub yuav tsum nyeem .
32. Yog tias qhov ntsuas tsis pom 000000, xyuas tias cov ko taw ntawm lub platform tsis tau screwed nruj dhau, thiab xyuas kom meej tias lub platform yog theem.

QHOV TSEEB PARAMETER SETTINGS

Cov ntawv qhia zaub mov tsis muaj qhov ntsuas qhov ntsuas (C01 txog C07 tau piav qhia saum toj no) thiab ntu ntu kev teeb tsa (C08 thiab nce).
Txhawm rau nkag mus rau seem calibration lub foob hloov (nyob ntawm ib lub ces kaum ntawm PCB) yuav tsum OFF. Qhov no yuav tso cai rau nkag mus rau tag nrho C01 thiab nce mus. Yog tias lub foob hloov yog ON, ces tsuas yog C08 thiab nce tuaj yeem nkag los ntawm tus neeg siv. Yog tias koj rhuav tshem lub foob foob los ntawm kev qhib lub nraub qaum ntawm qhov taw qhia kom nkag mus rau lub foob hloov, koj yuav tsum muaj qhov ntsuas qhov ntsuas rov qab. Nco ntsoov kho lub foob hloov rov qab mus rau qhov qub chaw tom qab calibration / configuration tau ua.
Txhawm rau nkag mus rau calibration / parameter nqis, ua raws li cov txheej txheem hauv qab no:

1. Nias thiab tuav tus yuam sij SET thiab ESC tib lub sijhawm kom nkag mus rau qhov kev teeb tsa parameter
2. Nkag mus los ntawm cov chaw (C01 txog C45) los ntawm kev siv tus lej keypad
3. Nias lub tus yuam sij rau nkag / kho qhov parameter teeb tsa

Nias lub tus yuam sij kom txuag thiab tawm qhov chaw thaum twg los tau
Table 1. Qhov taw qhia Parameter nqis

Muaj nuj nqi	Parameter	Chaw/Kev xaiv
Lub Tshuab Ntsuas		1 = kg 2 = lb
Kev teeb tsa decimal		0 = no decimal 1 = #.# 2 = #.## 3 = #.### 4 = ######
Kev Kawm Tiav (readability ntawm tus lej tseem ceeb)		options: 1/2/4/10/20/50 Example uas tsis muaj tus lej lej (ie C02=0) 1 = 1 lb 2 = 2 lb 5 = 5 lb 10 = 10 lb 20 = 20 lb 50 = 50 lb
Muaj peev xwm kawg		set max peev ex. 100 Kg = 0100.00 TZS
Xoom Kev Kho Mob		0 = xoom calibration tsis xav tau 1 = teeb lub xoom calibration (Thov xyuas kom meej qhov ntsuas yog khoob thiab lub teeb ruaj khov yog nyob rau)
Calibration		0 = calibration tsis xav tau 1 = npaj calibrate nrog calibration hnyav
Restore Default Settings		0 = tsis restore 1 = rov qab mus rau qhov chaw pib
Tuav Function		0 = tua tuav ua haujlwm 1 = Peak tuav – Grabs qhov hnyav tshaj plaws 2 = Kev tuav tuav – tuav lub luj tam sim no 3 = Nws pib tuav – Tsis siv neeg tuav cov ntaub ntawv thaum ruaj khov 4 = Nruab nrab tuav – rau tsiaj hnyav, nruab nrab qhov hnyav ntawm liampua 3sn 5 = Nws pib nruab nrab tuav – Qhov nruab nrab tuav tsis tas yuav tsum nias lub khawm tuav
Chav Hloov		0 = tua lub tsev hloov 1 = qhib chav tsev hloov
Kev txuag hluav taws xob		0 = tua hluav taws xob txuag chaw 3 = tua cov zaub yog tias tsis hloov hauv 3 feeb 5 = tua cov zaub yog tias tsis hloov hauv 5 feeb
Tsis siv neeg Fais fab tuag		0 = tua nws pib fais fab tuag 1 = fais fab tuag txiav tawm yog tias tsis muaj kev hloov pauv hauv 10 feeb 2 = fais fab tuag txiav tawm yog tias tsis muaj kev hloov pauv hauv 20 feeb 3 = fais fab tuag txiav tawm yog tias tsis muaj kev hloov pauv hauv 30 feeb 4 = fais fab tuag txiav tawm yog tias tsis muaj kev hloov pauv hauv 40 feeb 5 = fais fab tuag txiav tawm yog tias tsis muaj kev hloov pauv hauv 50 feeb 6 = fais fab tuag txiav tawm yog tias tsis muaj kev hloov pauv hauv 60 feeb
Tswb Tswb		0 = kaw lub tswb 1 = qhib lub tswb
Upper Limit tswb		Teem lub siab txwv nyob rau hauv lub max. muaj peev xwm
Lower Limit Tswb		Teem qis qis hauv qhov max. muaj peev xwm
Sab hauv Code Display		tshawb xyuas cov lej sab hauv (cov ntaub ntawv nyoos)
Khaws zaub mov
Khaws zaub mov
Kev sib txuas lus teeb tsa rau RS232 Chaw nres nkoj		Teem lub serial interface cov ntaub ntawv tso zis txoj kev: 0 = Tua tawm serial interface cov ntaub ntawv tso zis 1 = Command thov hom, txuas lub computer. 2 = Hom luam ntawv, txuas lub tshuab luam ntawv 3 = Kev xa tawm tsis tu ncua, txuas lub computer lossis tso saib
Khaws zaub mov
Phau ntawv Zero Range		0 = tua manually xoom chaw 1 = ± 1% max peev xwm 2 = ± 2% max peev xwm 4 = ± 4% max peev xwm
Pib Zero Range		0 = tsis muaj pib xoom teeb tsa 1 = ± 1% max peev xwm 2 = ± 2% max peev xwm 5 = ± 5% max peev xwm 10 = ± 10% max peev xwm 20 = ± 20% max peev xwm
Zero Tracking		0 = tua xoom taug qab 0.5 = ± 0.5d d = faib 1.0 = ± 1.0d 2.0 = ± 2.0d 3.0 = ± 3.0d 4.0 = ± 4.0d 5.0 = ± 5.0d Nco tseg: qhov zero taug qab ntau yam tsis tuaj yeem loj dua li phau ntawv xoom ntau
Zero Tracking Sijhawm		0 = tua xoom taug qab lub sijhawm 1 = 1 vib nas this 2 = 2 vib nas this 3 = 3 vib nas this
Overload Range		00 = tua overload range 01-99d = overload range setting d = faib
Cov zaub tsis zoo		0 = -9d 10 = -10% max. muaj peev xwm 20 = -20% max. muaj peev xwm
Lub Sijhawm Sawv Cev		0 = ceev 1 = nruab nrab 2 = qeeb
Standstill Range		1 = 1 d d = faib 2 = 2 d 5 = 5 d 10 = 10 d
Cov Lim (rau lim txav hnyav xws li tsiaj txhu)		0 = tua dynamic lim 1 = 1 digital lim zog 2 = 2 digital lim zog 3 = 3 digital lim zog 4 = 4 digital lim zog 5 = 5 digital lim zog 6 = 6 digital lim zog Nco tseg: Tus naj npawb siab dua, qhov siab dua lub zog lim
Noise Lim		0 = tua lub suab nrov lim 1 = 1 digital lim zog 2 = 2 digital lim zog 3 = 3 digital lim zog
Hom kev sib txuas lus		0 = tua tsis tu ncua kis 1 = format 1 2 = format 2 3 = format 3 4 = format 4
Baud Rate		0 = 600 1 = 1200 2 = 2400 3 = 4800 4 = 9600 5 = 19200 6 = 38400 7 = 57600 8 = 115200
Odd-Even Check		0 n:8 1 = 70 2 = 7 e
Lub sijhawm		0 = no limit 1 = 100 ms 2 = 200 ms 3 = 500 ms 4 = 1s 5 = ruaj khov kis
Checksum		0 = nr 1 = yog
Simple Command Support		0 = nr 1 = yog
Commanding Format		0 = tua commanding hom 1 = yooj yim commanding 2 = standard commanding
Baud Rate		0 = 600 1 = 1200 2 = 2400 3 = 4800 4 = 9600 5 = 19200 6 = 38400 7 = 57600 8 = 115200
Odd-Even Check		0 n:8 1 = 70 2 = 7 e
Teb hom ntawv		0 = format 1 1 = format 5 2 = format 4
qhev ID		0-99 : kuv
Sau hom		0 = tua lub tshuab luam ntawv 1 = tig rau hom luam ntawv
Baud Rate		0 = 600 1 = 1200 2 = 2400 3 = 4800 4 = 9600 5 = 19200 6 = 38400 7 = 57600 8 = 115200

Table 3. Default Parameter Chaw

Muaj nuj nqi	Parameter	Default
Lub Tshuab Ntsuas		1
Kev teeb tsa decimal		0
Kev Kawm Tiav		1
Muaj peev xwm kawg		10000
Xoom Kev Kho Mob		0
Calibration		0
Restore Default		0
Tuav Function		0
Chav Hloov		9
Kev txuag hluav taws xob		0
Tsis siv neeg Fais fab tuag		0
Tswb Tswb		01
Upper Limit tswb		000000
Lower Limit Tswb		000000
Sab hauv Code Display		999999
Kev Sib Txuas Lus		1
Phau ntawv Zero Range		2
Pib Zero Range		10
Zero Tracking		0.5
Zero Tracking Sijhawm		1
Overload Range		9
Cov zaub tsis zoo		10
Lub Sijhawm Sawv Cev		1
Standstill Range		2
Cov Lim		0
Noise Lim		2
Hom kev sib txuas lus		2
Baud Rate		1
Odd-Even Check		0
Lub sijhawm		1
Checksum		0
Lus txib yooj yim		0
Commanding Format		1
Baud Rate		4
Odd-Even Check		0
Teb hom ntawv		0
qhev ID		0
Sau hom		1
Baud Rate		4

Kev teeb tsa roj teeb

Qhov taw qhia ua haujlwm nrog AC lub zog, thov nco ntsoov voltage yog tsim nyog thiab xyuas seb AC fais fab mov puas yog earthing.
Voltage transformer thiab ruaj khov Circuit Court yog tsim nyob rau hauv qhov taw qhia thov tsis txhob qhib nws yam tsis muaj kev qhia. Stable Circuit Court txuas
J1 Inditial theem rau AC fais fab input thiab voltagua transformer
J2 Qib thib ob rau voltagua transformer
F1 220V 0.25A fusePCB qhia fais fab kev sib txuas
Postive roj teeb txuas nrog BAT +, tsis zoo batter txuas nrog BAT-

SIJ HAWM INSTALLATION

SL-905 MAX. Txhawb 12 x 350ohm load cells. (4 xov hlau los yog 6 xov hlau thauj khoom ntawm tes) Kev sib txuas ntawm lub tshuab thauj khoom thiab qhov taw qhia yog los ntawm lub davhlau ya nyob twg thaiv. daim duab txuas raws li hauv qab no. 4 Hlau load cell txuasEXC+, EXC-, SIG+, SIG- (load cell) to EXC+, EXC-, SIG+, SIG- (qhov taw qhia)
EXC + thiab SEN + yuav luv luv Circuit Court
EXC- thiab SEN + yuav luv luv Circuit Court
6 Hlau load cell txuasEXC+,SEN+,SEN-, EXC-,SIG+,SIG- (load cell) to EXC+,SEN+, SEN-, EXC-,SIG+,SIG- (qhov taw qhia)
Kev sib txuas lus cuam tshuam
SL-905 muaj 3pcs RS232, 1 pc RS485 thiab 1 pc USB-Com.
1 RS232 yog kev sib cais hluav taws xob nrog lub xov tooj ntawm tes thiab tuaj yeem teeb tsa hauv C18 parameter, DEFAULT tawm.
RS485 thiab USB-COM yog hluav taws xob cais ib yam nkaus.
Kev sib txuas lus muaj nuj nqi yog teem rau hauv C41 ~ C79 parameter.
RS 232 kev twb kev txuas raws li hauv qab no.USB-COM raws li hauv qab no RS485 raws li hauv qab no.

PIN	Txhais	Interface	Muaj nuj nqi
RX 1	RS232-1 tau txais	Qauv: RS232-1	Txuas ntxiv Tranmit
TX 1	RS232-1 kis tau tus mob
GND	Earthing
RX 2	RS232-1 tau txais	Qauv: RS232-2	Kev luam ntawv
TX 2	RS232-1 kis tau tus mob
GND	Earthing
8x3 XNUMX	RS232-1 tau txais	Qauv: RS232-3 Hluav taws xob cais	C18: Commanding mode Printing mode Txuas ntxiv kis hom
TX 3	RS232-1 kis tau tus mob
GND	Earthing
A	RS485 tso zis A	TSI RS485 Kev rho tawm hluav taws xob	Kev txib hom
B	RS485 tso zis B
USBV +	USB zog	USB rau COM Kev rho tawm hluav taws xob	Kev txib hom
D-	Cov ntaub ntawv-
D+	Cov ntaub ntawv +
GND	USB earthing

TXOJ CAI FORMAT

Khoos phis tawj xa mus txuas ntxiv (hom 1)S1: qhov hnyav, ST = standstill, US = tsis standstill, OL = overload
S2: hnyav hom, GS = tag nrho hom, NT = net hom
S3: qhov hnyav ntawm qhov zoo thiab qhov tsis zoo, "+" lossis "-"
Cov ntaub ntawv: qhov hnyav tus nqi, suav nrog tus lej lej
S4: "kg" lossis "lb"
CR: carriage rov
LF: kab pub

RS232 SERIAL OUTPUT FORMAT
Ua raws li tus pin tawm ntawm Table 5 hauv qab no txhawm rau txuas qhov taw qhia RS-232 Serial ntaus ntawv
Table 5. DB9 Pin Descriptio

DB 9 Pin	Txhais	Muaj nuj nqi
2	TXT	Xa cov ntaub ntawv
3	RXD	Txais Cov Ntaub Ntawv
5	GND	Hauv av Interface

Cov ntawv tso zis ntau zaus nyob ntawm qhov chaw rau parameter C18. Cov zis serial muaj ib txoj hlua ntawm ASCII cim. Ntawm no yog ib daim ntawv teev cov serial tsis

• 8 ib data
• 1 nres bits
• Tsis muaj parity
• Tsis muaj tes tuav tes

Nco tseg: Nrog rau qhov kev xaiv RS232 tso zis peb muaj cov ntaub ntawv logging software muaj raws li pom hauv daim duab 5.

Hauv qab no yog cov qauv ntawm cov zis serial

• C18=0 – Tua tawm serial interface cov ntaub ntawv tso zis
• C18=1 - Kev xa tawm tsis tu ncua, txuas 2nd loj zaub
• C18 = 2 - hom luam ntawv, txuas lub tshuab luam ntawv
• C18=3 – Hais kom ua hom, txuas lub computer.
• C18 = 4 - PC txuas txuas xa mus hom, txuas lub computer
• C18 = 5 – PC/loj zaub, hom kev xa mus tas li
• C18=6 - Sau rau lub tshuab luam ntawv nplaum

Tau tshaj rau Yaohua A9 (Hom ntawv 3)
ASCII code los qhia cov ntaub ntawv. Cov ntaub ntawv kis tau tus mob yog qhov hnyav tam sim no.
Txhua tus yog los ntawm 12 pawg ntawm cov ntaub ntawv.

X me ntsis	Nco tseg
1	02 (XON) pib
2	+ lossis - cim
3	Cov ntaub ntawv hnyav me ntsis
:	Cov ntaub ntawv hnyav:
:	Cov ntaub ntawv hnyav:
8	Tsawg me ntsis ntawm cov ntaub ntawv hnyav
9	Decimal ntsis ntawm sab xis mus rau sab laug (0 ~ 4)
10	Khib lossis txawm kuaj rau siab 4 ntsis
11	Khib lossis txawm kuaj rau qis 4 ntsis
12	03 (XOFF) end

PC los yog tej thaj chaw deb zaub Nruam xa tawm hom (Hom ntawv 4)PC los yog tej thaj chaw deb zaub Nruam xa tawm hom (Hom ntawv 5)

Commanding Format
Standard command
Siv ASCII code los teb
Kev xa tawm:

Hom ntawv	STX	Chaw Nyob	Lus txib	VERIFY	ETX
Cov ntsiab lus	02	UAS / 20	AF, T, Z	3 h3l	03

Tsis muaj chaw nyob, siv qhov chaw (20hex), 6 khoom hauv tag nrho.
Teb:

Hom ntawv	STX	Chaw Nyob	Lus txib	teb	VERIFY	ETX
Cov ntsiab lus	02	UAS / 20	BD	(W)	3 h3l	03
Cov ntsiab lus	02	UAS / 20	A, T, Z, N, X		3 h3l	03

W: lub cim + qhov hnyav + lej lej
Rov qab 6/14 ntsis
Cov npe hais kom ua:
A: tuav tes
B: tag nrho qhov hnyav
C: hnyav hnyav
D: Net nyhav
T: laj
Z: xoo
N: hais kom ua tsis tau
X: Tsis commanding

Yooj yim commanding:

Code	Lub npe	Muaj nuj nqi
T	Tare	Txo tare los yog ntshiab tare
Z	Zero	Tare yuav xoom
P	Kev luam ntawv	Sau qhov hnyav tam sim no
R	Nyeem tag nrho/net hnyav	Teb rau format 1

Nco tseg:
Yog tias teeb tsa tus lej ID tsis yog 0, xa nrog ID.

PRINTING

Cov hauv qab no yog cov ntawv luam tawm ntawm lub tshuab luam ntawv Selleton:
Standard Printing hom

S/N:	XXX
Hnub tim:	05/01/2017
Sijhawm:	11:30:52 Nws
Net	25.6 lb ib
Tare	10.3 lb ib
Tag nrho	35.9 lb ib

Txuag Printing hom

Hnub tim:	05/01/2017
Sijhawm:	11:30:52 Nws
N001:	25.6 lb ib
N002:	10.3 lb ib
Tag nrho	35.9 lb ib
Suav	002

Suav Printing hom

Hnub tim:	5/01/2017
Sijhawm:	11:30:52 Nws
Daim	xxxxxx ib
APW	xxxxxxxxxxxxx
Net:	25.6 lb ib
Tare:	10.3 lb ib
Tag nrho:	35.9 lb ib

Tshawb xyuas hom luam ntawv

Hnub tim:	05/01/2017
Sijhawm:	11:30:52 Nws
Tus lej	231
Qhov hnyav	10.3kg ib

KEV PAB CUAM

Division: Tus nqi ntawm increments ib scale muab. Qhov ntsuas yuav raug npaum li cas
Muaj peev xwm: qhov siab tshaj qhov ntsuas muaj peev xwm
Pib Zero Range: Qhov percentage ntawm qhov hnyav tau tso cai rau ntawm qhov ntsuas thaum qhov ntsuas tau siv los ntawm qhov ntawd yuav cia li xoom.
example: Yog thawj zaug xoom ntau yog teem rau 10% ntawm qhov max. muaj peev xwm thiab koj max. muaj peev xwm yog 100lbs, koj tuaj yeem tso mus txog 10lbs ntawm qhov hnyav ntawm qhov ntsuas thiab thaum qhov ntsuas tau siv rau, nws yuav cia li xoom tawm qhov hnyav.
Phau ntawv Zero Range: Qhov percentage ntawm qhov hnyav tso cai rau ntawm qhov ntsuas qhov ntsuas yuav cia koj manually xoom (txhua yam saum toj no feem pua ​​yuav raug tared)
Zero Tracking Range: Ib subset rau phau ntawv xoom ntau yam; Yog tias qhov hnyav ntawm qhov ntsuas tsis ruaj khov, qhov kev ntsuas xoom tseem tso cai rau koj kom xoom nyob rau hauv ib qho kev faib ntawm qhov ntsuas.
Zero Tracking Sijhawm: Ib subset mus rau xoom mus txog qhovtwg, nws yog lub sij hawm tso cai rau lub teev kom poob nyob rau hauv lub xoom mus txog qhovtwg range kam rau ua thiab tseem tsim nyog yuav zero'd
Overload Range: Nyhav pub uas yog tawm ntawm lub teeb calibrated ntau. Ntxiv qhov kam rau ua rau calibrated max. muaj peev xwm tsis tas yuav recalibrate.
example: Yog tias koj qhov ntsuas muaj qhov max. muaj peev xwm ntawm 1000lbs nrog ib tug faib ntawm 1 thiab koj teem lub overload ntau rau 60, koj muaj peev xwm ntxiv 1060lbs ntawm qhov hnyav rau lub teev yam tsis muaj nws tso saib qhov yuam kev code
Cov zaub tsis zoo: Ntev npaum li cas koj tuaj yeem mus rau qhov tsis zoo ua ntej tso tawm qhov yuam kev
Lub Sijhawm Standstill: Yuav ceev npaum li cas cov nplai yuav stabilize
Standstill Range: Ntau npaum li cas qhov ntsuas tuaj yeem hloov pauv ua ntej txiav txim siab ruaj khov
Digital Filter: Rau kev lim tawm qhov hnyav, xws li tsiaj txhu, Nws hloov pauv qhov ntsuas qhov ntsuas li cas rau kev hloov pauv hauv kev txav.
Noise Filter: Lub lim rau qhov cuam tshuam qhov ntsuas li cas rau kev hloov pauv dav dav
Tus nqi Baud: Tus nqi ntawm cov ntaub ntawv xa mus rau hauv kev sib txuas lus channel.
example: Hauv cov ntsiab lus ntawm qhov chaw nres nkoj serial, "9600 baud" txhais tau tias qhov chaw nres nkoj serial muaj peev xwm hloov tau qhov siab tshaj plaws ntawm 9600 khoom ib ob.

KEV TIV THAIV

yuam kev Codes

yuam kev	Yog vim li cas	Kev daws
	1. Tshaj dhau 2. Kev sib txuas tsis raug nrog cov khoom thauj 3. Load cell muaj teeb meem zoo	1. Txo qhov hnyav 2. Txheeb xyuas qhov txuas ntawm lub xov tooj ntawm tes 3. Tshawb xyuas lub xov tooj ntawm tes; Kos lub input/output 4. Saib Q&A ntu
	1. Calibration tsis zoo 2. Kev sib txuas tsis raug nrog cov khoom thauj 3. Load cell muaj teeb meem zoo	1. Xyuas kom cov nplai yog theem 2. Txheeb xyuas qhov txuas ntawm lub xov tooj ntawm tes 3. Tshawb xyuas cov khoom siv hluav taws xob ntawm tes thiab cov khoom tso tawm 4. Saib Q&A ntu
	Thaum lub sij hawm calibration, qhov hnyav tsis siv lossis qhov hnyav tshaj qhov max. muaj peev xwm	Siv qhov hnyav kom raug nyob rau hauv qhov kev txiav txim siab
	Thaum lub sij hawm calibration, qhov hnyav yog qis dua qhov tsawg kawg nkaus qhov hnyav	Qhov ntsuas qhov hnyav tsawg kawg yog 10% ntawm qhov max. muaj peev xwm teeb tsa hauv C04. Pom zoo siv 60% -80% ntawm max. muaj peev xwm yog ua tau
	Thaum lub sij hawm calibration, lub teeb liab input tsis zoo	1. Txheeb xyuas txhua qhov kev sib txuas ntawm cov hlau 2. Tshawb xyuas lub xov tooj ntawm tes 3. Recalibrate 4. yuav tsum tau hloov PCB yog cov kauj ruam 1-3 ua tsis tiav
	Thaum lub sij hawm calibration teeb liab tsis ruaj khov	Tom qab lub platform ruaj khov, pib calibration
	EEPROM Yuam Kev	Hloov PCB
	Tshaj Zero Range	Tshem cov load thiab saib Q&A seem
	Tus naj npawb rau qaib yog loj heev	Nkag mus ntxiv nrog tus lej raug
	Tsis muaj ntaub ntawv	Lub tsub zuj zuj yog khoob

Q&A

Q: Qhov ntsuas tsis tig

A: Xyuas kom tseeb tias cov hlua hluav taws xob tau ntsaws rau hauv, thiab muaj lub zog. Ib txoj hauv kev yooj yim los ntsuas qhov no yog los ntawm kev txuas lwm lub cuab yeej rau tib lub qhov hluav taws xob thiab saib seb nws puas ua haujlwm

Q: Qhov kev nyeem ntawv tsis zoo thaum siv lub load

A: Sim hloov Sig + thiab Sig-wiring txuas nrog lub thawv thauj khoom thiab / lossis lub thawv sib txuas (yog tias siv tau)

Q: Kuv yuav daws qhov yuam kev ERR6 li cas?

A: Thov ua raws li cov txheej txheem hauv qab no: 1) Qhib qhov ntsuas thiab xyuas kom tsis muaj dab tsi nyob ntawm qhov ntsuas, thiab qhov ntsuas yog qib thiab tsis wobbling 2) Nias thiab tuav lub "PRINT thiab HOLD" tus yuam sij ib txhij rau ob peb feeb. 3) Lub vijtsam yuav nyeem "C01" 4) Siv cov xub xub, hloov C01 rau C20. Koj yuav tsum hloov tus lej thib 1 ntawm 0 mus rau 2 ua ntej koj tuaj yeem hloov tus lej thib 2 mus rau 1. 0) Nias "PRINT" tus yuam sij kom nkag mus rau C5 parameter 20) Hloov tus nqi C6 ntawm sab xis mus rau 20 yog tias siv tau tus xub xub. Yog tias 100 tsis muaj hloov pauv mus rau 100 20) Nias "PRINT" tus yuam sij nkag rau koj xaiv 7) Lub vijtsam yuav nyeem "C8" tam sim no 21) Nias "PRINT" tus yuam sij nkag mus rau C9 parameter 21) Hloov tus nqi ntawm sab xis ntawm C10 mus rau 21 yog muaj, 100 yog tsis yog 20) Nias "PRINT" tus yuam sij rau nkag mus rau koj xaiv 11) nws screen yuav nyeem "C12" tam sim no 22) Nias "TOTAL" tus yuam sij txuag thiab tawm 13) Fais fab lub qhov taw qhia tawm thiab ces nyob rau, thiab saib seb qhov no puas daws qhov teeb meem ERR 14. Yog tias tsis yog, ua raws li Q&A cov lus teb hauv qab no rau kev daws teeb meem "nnnnnn" thiab "uuuuuu" yuam kev

Q: Kuv yuav daws qhov yuam kev "nnnnnn" thiab "uuuuuu" li cas?

A: 1) Tshawb xyuas seb lub cable uas khiav ntawm qhov taw qhia mus rau lub thawv sib txuas puas puas lawm. Yog tias nws yog, hloov lub cable. 2) Qhib lub thawv sib txuas (yog tias muaj) thiab xyuas seb puas muaj dej puas tsuaj. Yog tias muaj, hloov lub thawv sib txuas 3) Xyuas kom tag nrho cov xov hlau ntawm tag nrho 5 lub davhlau ya nyob twg (5 xov hlau ntawm txhua lub davhlau ya nyob twg) tsis xoob. Rov nruj dua cov ntsia hlau txawm tias cov xov hlau zoo li txuas nrog 4) Recalibrate 5) Yog tias cov kauj ruam 1-4 tsis ua haujlwm, nws muaj peev xwm ua tau ib lossis ntau lub hlwb tsis zoo (sib tham nrog tech@selletonscales.com rau cov lus qhia ntxiv)

Tiv tauj peb

Thov e-mail info@selletonscales.com rau cov lus nug txog kev muag khoom lossis hu rau 844-735-5386 Ib

oading="lazy" class="alignnone wp-image-13134294 aligncenter" src="https://manuals.plus/wp-content/uploads/2024/05/sellEton-Logo-1.jpg" alt="sellEton Logo" width="254" height="87" srcset="https://manuals.plus/wp-content/uploads/2024/05/sellEton-Logo-1.jpg 1025w, https://manuals.plus/wp-content/uploads/2024/05/sellEton-Logo-1-550x188.jpg 550w, https://manuals.plus/wp-content/uploads/2024/05/sellEton-Logo-1-768x262.jpg 768w" sizes="(max-width: 254px) 100vw, 254px">Don’t forget to visit our webqhov chaw ntawm:
www.selletonscales.com

Cov ntaub ntawv / Cov ntaub ntawv

sellEton SL-905 Digital Indicator With Numeric Keypad [ua pdf] Tus neeg siv phau ntawv SL-905 Digital Indicator With Numeric Keypad, SL-905, Digital Indicator With Numeric Keypad, Qhov Ntsuas Nrog Numeric Keypad, Numeric Keypad, Keypad

Cov ntaub ntawv

• Cov neeg siv phau ntawv