AcuRite Humidity Monitor
Models: 00215 / 00477 / 00613
Features & Benefits
The AcuRite Humidity Monitor provides essential environmental data for your home.
Key Features Displayed:
- Current Humidity: Displays the current indoor humidity percentage.
- Low Humidity Record: Shows the lowest humidity level recorded over the past 24-36 hours.
- Current Temperature: Displays the current indoor temperature.
- Low Temperature Record: Shows the lowest temperature recorded over the past 24-36 hours.
- High Temperature Record: Shows the highest temperature recorded over the past 24-36 hours.
- High Humidity Record: Shows the highest humidity level recorded over the past 24-36 hours.
- Humidity Level Icon: A visual indicator representing the current indoor humidity comfort level (e.g., high, low, or ideal).
The device features a clear digital display showing current readings and historical highs/lows. It also includes indicators for 'HIGH', 'LOW', and 'OK' humidity, along with text labels for 'indoor humidity' and 'indoor temp.'.
Setup
Follow these steps to set up your Humidity Monitor:
-
Remove Protective Film
Remove the protective film applied to the LCD screen by locating the tab and peeling it off.
-
Install or Replace Batteries
Batteries are required for operation. AcuRite recommends high-quality alkaline batteries for optimal performance. Heavy-duty or rechargeable batteries are not recommended.
- Slide off the battery compartment cover.
- Insert 1 x AA battery into the compartment, observing the polarity [polarity indicator] diagram.
- Replace the battery cover.
-
Select Degrees Fahrenheit or Celsius
To switch between Fahrenheit (°F) and Celsius (°C) temperature units, press the "°C/°F" button located on the back of the unit.
-
Placement for Maximum Accuracy
Proper placement is critical for sensor accuracy. Place the monitor in a dry area free of dirt and dust. To ensure accurate temperature readings, keep the monitor out of direct sunlight and away from heat sources or vents. For accurate humidity readings, place it away from humidity sources.
The monitor includes a magnetic backing for refrigerator mounting and a pop-out stand for tabletop use.
Operation
Humidity Level Icon
The Humidity Level Icon provides an easy-to-understand indication of your home's indoor humidity level, signifying whether it is low, high, or ideal for your health and comfort.
High/Low Records
The monitor captures high and low readings in three 12-hour blocks, starting from when the batteries are installed. After each 12-hour block, it reviews the past three blocks (up to 36 hours) to display the highest and lowest recorded temperature and humidity. These records are always based on data from the last 24 to 36 hours.
Specifications
| Parameter | Value |
|---|---|
| Temperature Range | 32°F to 122°F; 0°C to 50°C |
| Humidity Range | 16% - 98% RH (relative humidity) |
| Battery Requirements | 1 x AA alkaline battery |
Battery Safety and Disposal
⚠️ PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY:
- Clean battery contacts and device contacts before installation.
- Remove batteries from equipment not in use for extended periods.
- Follow the polarity [polarity indicator] diagram in the battery compartment.
- Promptly remove dead batteries.
- Dispose of used batteries properly.
- Use only batteries of the same or equivalent type recommended.
- DO NOT incinerate used batteries.
- DO NOT dispose of batteries in fire, as they may explode or leak.
- DO NOT mix old and new batteries or different types of batteries (alkaline/standard).
- DO NOT use rechargeable batteries.
- DO NOT recharge non-rechargeable batteries.
- DO NOT short-circuit the supply terminals.
♻️ Dispose of batteries responsibly according to local regulations.
