iControls ROC-2HE-UL Reverse Osmosis System Controller

Cov lus qhia

Zoo siab txais tos.
Ua tsaug rau kev yuav ib qho iControls maub los.

Koj tau xaiv qhov zoo hauv kev xaiv iControls. Koj tuaj yeem cia siab tias xyoo ntawm kev pabcuam tsis muaj teebmeem. Nrog rau kev tsim qauv raws li kev tawm tswv yim los ntawm cov thawj coj hauv RO teb ntxiv rau peb tus kheej kev paub hauv RO system tsim thiab tsim khoom, iControls RO controllers yog qhov zoo tshaj plaws hauv chav kawm.

Raws li zoo raws li peb cov tswj, muaj ib txwm muaj chaw rau kev txhim kho. Yog tias koj muaj kev paub dhau los, lub tswv yim lossis cov tswv yim zoo lossis tsis zoo peb xav hnov ​​​​los ntawm koj. Ntxiv dua thiab, ua tsaug rau koj kev yuav khoom. Txais tos rau lub zej zog ntawm iControls cov neeg siv.

David Spears Thawj Tswj Hwm, iControls Technologies Inc. david@icontrols.net

Cov tswv yim

• Tank theem switches: (2) Nquag-Kaw. Yuav siv tau nrog ib theem hloov.
• Inlet siab hloov: Nquag-Qhib.
• Pretreat lockout hloov: Nquag-Qhib
  Lub Tank, Tsawg Siab thiab Pretreat inputs yog 50% lub luag haujlwm voj voog square yoj, 10VDC ncov @ 10mA max. Hloov cov inputs yog cov hu qhuav xwb. Thov voltage rau cov terminals no yuav ua rau tus maub los puas.
• Tswj fais fab: 110-120 / 208-240 VAC, 60 / 50Hz (Ntau: 110-240 VAC)
• Permeate conductivity: 0-3000 PPM, 0-6000 µs (tus qauv sensor, CP-1, K = .75)
• Feed Conductivity (opt): 0-3000 PPM, 0-6000 µs (tus qauv sensor, CP-1, K = .75)

Output Circuit Ratings

• Feed Solenoid: 1A. Voltage yog tib yam li lub cev muaj zog / khoom siv voltage.
• Solenoid Flush: 1A. Voltage yog tib yam li lub cev muaj zog / khoom siv voltage.
• Lub cev muaj zog: 1.0 Hp / 110-120V, 2.0 Hp / 208-240V.

Kev tiv thaiv Circuit Court
Relay FuseLoj: F1x5mm 20 Amp  BelFuse 5ST 2-R
Nco tseg: Lub fuse qhia saum toj no tsuas yog rau kev tiv thaiv ntxiv xwb. Ceg Circuit Court tiv thaiv thiab disconnect txhais tau tias yuav tsum tau muab externally.
Saib Field Wiring Diagram rau Branch Circuit Protection Requirement.

Lwm yam
Qhov Loj: 7" siab, 7" wide, 4" tob. Nema 4X Polycarbonate Hinged Enclosure.
Qhov hnyav: 2.6 lb. (Basic Configuration, tsis suav nrog kev xaiv xaim hlua,
Ib puag ncig: thiab lwm yam ..) 0-50 ° C, 10-90% RH (tsis-condensing)

Simplified Schematic

Controller Tshajview

Controller nthuav dav: CPU-4

Tus Txheej Txheem Qhia: Terminal Board, TB-1 (Rev D2) (Saib daim duab 1 rau schematic)

Conductivity Probe Installation

Controller Programming. Nkag mus rau cov ntawv qhia zais

Controller Programming: Menu Navigation

Qhov no yog ib feem view ntawm cov menus sab hauv. Cov khoom kho tau ntxiv muaj xws li: Lus, Suab tswb (ON/OFF), WQ Poob teeb liab teeb tsa, Hardware & Firmware Version thiab ntau dua.

Controller Programming: ROC-2HE Program Xaiv

Tus maub los muaj 4 cais cov neeg siv-xaiv cov teeb tsa rau kev teeb tsa RO. Lub Hoobkas de-fault chaw yog qhia hauv qab no. Cov kev teeb tsa zoo ib yam tshwj tsis yog kev hloov pauv hauv tus cwj pwm flush.

• Program 1, Kev kub siab dej ntws.
• Program 2, Tsis Muaj Flush
• Program 3, Permeate Flush, (tsis tshua muaj siab, inlet valve kaw)
• Program 4, Tsis tshua muaj siab, pub dej ntws tawm
• Saib nplooj ntawv dhau los rau cov lus qhia txog kev nkag mus rau cov ntawv qhia zaub mov xaiv cov kev pab cuam no.
• Saib Daim Ntawv Ntxiv A rau cov lus piav qhia ntxaws txog Cov Tsis Muaj thiab lawv cuam tshuam rau RO txoj haujlwm.

Cov yam ntxwv no yog neeg xiam oob qhab los ntawm lub neej ntawd vim muaj peev xwm tsis meej pem ntawm ib feem ntawm cov neeg siv kawg hauv thaj teb. Lawv tuaj yeem qhib tau thaum xav tau los ntawm OEM PC programming interface uas tso cai rau kev hloov pauv rau tag nrho cov txiaj ntsig tau qhia saum toj no.

Controller Fault Condition Displays

Hauv qab no yog examples thiab cov lus piav qhia ntawm cov lus qhia uas nrog rau cov xwm txheej txhaum cai ntawm CPU-4. Cov xwm txheej tsis raug ib txwm qhia txog qhov teeb meem ntawm qee yam uas yuav tsum tau kho kom raug. cov lus qhia muab cov ntaub ntawv txaus los lees paub lub hauv paus ntawm qhov txhaum thiab qhov yuav tsum tau ua kom raug-tive.

Low Pressure Fault: (System teb rau qhov tsis tshua muaj siab nyob rau hauv ib qho kev teeb tsa)

• Kab 1 “Service Fault”
• Kab 2 “Low Feed Pressure”
• Kab 3
• Kab 4 "Restart hauv MM: SS"

Pre Treat Fault: (Pretreat Switch yog kaw qhia qhov teeb meem nrog pretreat system).

• Kab 1 “Service Fault”
• Kab 2 “Pretreat”
• Kab 3
• Kab 4 "Check Pretreat Sys."

Permeate Conductity Fault: (Permeate conductivity yog siab dua lub tswb teeb.)

• Kab 1 “Service Fault”
• Kab 2 "Permeate TDS xxx ppm" lossis "Permeate Cond xxx us"
• Kab 3 “Tswb SP xxx ppm” lossis “Tswb SP xxx uss”
• Kab 4 "Rov pib Push OFF/ON"

Feed Conductivity Fault: (Feed conductivity yog siab tshaj lub tswb setpoint.)

• Kab 1 “Service Fault”
• Kab 2 "Pib TDS xxx ppm" lossis "Feed Cond xxx us"
• Kab 3 “Tswb SP xxx ppm” lossis “Tswb SP xxx uss”
• Kab 4 "Rov pib Push OFF/ON"

Conductivity Probe Cov lus yuam kev:

• Kab 2 “Inteference” - Cov suab nrov pom los ntawm kev ntsuas hluav taws xob, ntsuas tsis tau.
• Kab 2 "Over-range" - Kev ntsuas tsis nyob ntawm qhov ntau ntawm lub voj voog, kev sojntsuam kuj tseem yuav luv
• Kab 2 "Kev soj ntsuam luv luv" - Luv Circuit Court kuaj pom ntawm qhov ntsuas kub hauv kev sojntsuam
• Kab 2 “Kev sojntsuam tsis pom” - Qhib Circuit Court kuaj pom ntawm qhov ntsuas kub hauv kev sojntsuam (dawb thiab tsis-shielded hlau)
• Kab 2 "Probe Startup 1" - Internal reference voltage siab dhau los ua qhov ntsuas tau
• Kab 2 "Probe Startup 2" - Internal reference voltage tsawg dhau los ua qhov ntsuas tau
• Kab 2 "Probe Startup 3" - Internal excitation voltage siab dhau los ua qhov ntsuas tau
• Kab 2 "Probe Startup 4" - Internal excitation voltage tsawg dhau los ua qhov ntsuas tau

Appendix B. Tswj Kev Ua Haujlwm: Programming Interface Overview

Programming interface yog lub cuab yeej Windows-based rau kev hloov pauv rau ROC software. Qhov kev tshuaj ntsuam no qhia txog RO teeb tsa muaj. Muaj 4 qhov chaw-xaiv tau cov chaw khaws cia hauv CPU-.4

Appendix C. Warranty

iControls Limited Warranty

Dab tsi lub warranty npog:
iControls lav ROC 2HE kom tsis txhob muaj qhov tsis xws luag hauv cov ntaub ntawv thiab kev ua haujlwm thaum lub sijhawm ua tsov rog. Yog tias ib yam khoom ua pov thawj tias muaj teeb meem thaum lub sijhawm lav, iControls yuav yog ib qho kev xaiv kho lossis hloov cov khoom nrog cov khoom zoo li. Hloov cov khoom lossis cov khoom yuav suav nrog cov khoom siv rov ua dua tshiab lossis rov ua dua tshiab lossis cov khoom siv.

Lub warranty siv sijhawm ntev npaum li cas:
ROC 2HE tau lav rau ib (1) xyoo rau cov khoom thiab kev ua haujlwm txij li hnub thawj cov neeg siv khoom pur-chase lossis 15 lub hlis txij hnub nkoj nkoj, qhov twg los ua ntej.
Dab tsi lub warranty tsis them:

1. Kev puas tsuaj, deterioration los yog malfunction los ntawm:
   • a. Kev huam yuaj, kev siv tsis raug, kev tsis saib xyuas, hluav taws, dej, xob laim lossis lwm yam kev ua ntawm qhov xwm txheej, kev hloov kho yam tsis tau tso cai lossis tsis ua raws li cov lus qhia muab nrog cov khoom.
   • b. Kho lossis sim kho los ntawm leej twg tsis tau tso cai los ntawm iControls.
   • c. Kev puas tsuaj ntawm cov khoom vim kev xa khoom.
   • d. Ua rau sab nraud rau cov khoom xws li hluav taws xob hloov pauv.
   • e. Kev siv cov khoom siv lossis cov khoom tsis ua raws li iControls cov lus qhia tshwj xeeb.
   • f. Ib txwm hnav thiab tsim kua muag.
   • g. Lwm qhov laj thawj uas tsis cuam tshuam nrog cov khoom tsis raug.
2. Cov nqi tsheb thauj mus los tsim nyog kom tau txais kev pabcuam raws li qhov kev lees paub no.
3. Ua hauj lwm tshaj li lub Hoobkas ua hauj lwm.

Yuav ua li cas thiaj tau txais kev pabcuam

1. Txhawm rau kom tau txais kev pabcuam lav, hu rau iControls rau Kev Tso Cai Rov Qab Khoom (RMA).
2. Koj yuav tsum tau muab:
   • a. Koj lub npe thiab chaw nyob
   • b. Kev piav qhia ntawm qhov teeb meem
3. Ntim tus maub los ua tib zoo rau cov khoom xa tuaj thiab xa rov qab mus rau iControls, freight prepaid.

Txwv tsis pub muaj kev lav phib xaub
Tsis muaj kev lav phib xaub, qhia lossis qhia, uas txuas ntxiv dhau qhov kev piav qhia muaj nyob rau hauv no suav nrog kev lees paub ntawm kev ua lag luam thiab kev nyab xeeb rau ib lub hom phiaj tshwj xeeb.

Kev cais tawm ntawm kev puas tsuaj
iControls 'kev lav phib xaub yog txwv rau tus nqi kho lossis hloov cov khoom. iControls yuav tsis lav rau:

1. Kev puas tsuaj rau lwm yam khoom uas tshwm sim los ntawm ib qho tsis xws luag hauv cov khoom, kev puas tsuaj raws li qhov tsis txaus ntseeg, kev siv cov khoom siv tsis zoo, tsis muaj sijhawm, tsis muaj txiaj ntsig, tsis muaj lub sijhawm ua lag luam, tsis muaj kev zoo siab, cuam tshuam nrog kev lag luam kev sib raug zoo lossis lwm yam kev lag luam. poob, txawm hais tias qhia txog qhov ua tau lossis kev puas tsuaj.
2. Lwm yam kev puas tsuaj, txawm li cas los xij, qhov tshwm sim los yog lwm yam.
3. Ib qho kev thov tawm tsam tus neeg siv khoom los ntawm lwm tus neeg sab nrauv.

Cov nyhuv ntawm lub xeev txoj cai
Qhov kev lees paub no muab cov cai tshwj xeeb rau koj, thiab koj tuaj yeem muaj lwm txoj cai uas txawv ntawm lub xeev mus rau ib lub xeev. Qee lub xeev tsis tso cai txwv tsis pub muaj kev lav phib xaub thiab/lossis tsis pub cais tawm ntawm qhov xwm txheej lossis kev puas tsuaj, yog li cov kev txwv saum toj no thiab kev cais tawm yuav tsis siv rau koj.

iControls Technologies Inc. 1821 Empire Industrial Court, Suite A Santa Rosa, CA 95403
ph 425-577-8851 Ib
www.icontrols.net

Cov ntaub ntawv / Cov ntaub ntawv

iControls ROC-2HE-UL Reverse Osmosis System Controller [ua pdf] Tus neeg siv phau ntawv ROC-2HE-UL, Rov qab Osmosis System Controller, ROC-2HE-UL Rov Qab Osmosis System Controller, Osmosis System Controller, System Controller, Controller

Cov ntaub ntawv

• Cov neeg siv phau ntawv