Kev qhia
- Compact IO-Link ntaus ntawv rau analog converter uas outputs tus nqi analog, voltage lossis tam sim no, raws li qhia los ntawm IO-Link tus tswv
- Lub converter kuj txuas mus rau ib qho chaw analog, voltage lossis tam sim no, thiab tso tawm tus nqi rau IO-Link tus tswv thiab ua tus sawv cev PFM cov zis
- 4-pin M12 txiv neej ceev-disconnect connector txhawb IO-Txuas
- Ob tug 4-pin M12 poj niam ceev-disconnect connectors uas txhua tus txhawb analog inputs thiab outputs
- Rugged tshaj-molded tsim raws li IP65, IP67, thiab IP68
- Txuas ncaj qha mus rau lub sensor lossis txhua qhov chaw hauv kab kom yooj yim siv
Cov qauv
Nco tseg: Cov qauv muaj yog analog tam sim no hauv / tawm, thiab analog voltage hauv / tawm.
Tshajview
Analog hauv Thaum tus nqi analog input tau txais los ntawm qhov hloov pauv no, tus lej sawv cev tus nqi raug xa mus rau IO-Link Master ntawm Txheej Txheem Cov Ntaub Ntawv Hauv (PDI).
PDI Analog Ntau Yam:
- Voltage = 0 mV to 10,000 mV
- Tam sim no = 4,000 µA – 20,000 µA
Analog tawm Lub converter no kuj tso cai rau tus neeg siv kom tso tawm tus nqi analog los ntawm kev xa cov lej analog nqi los ntawm IO-Link Master ntawm Cov Ntaub Ntawv Txheej Txheem
Tawm (PDO).
PDO Analog Ntau Yam:
- Voltage = 0 mV to 11,000 mV
- Tam sim no = 0 µA txog 24,000 µA
PDO Outside Valid Range (POVR) Yog tias tus nqi PDO xa mus rau qhov hloov pauv no yog sab nraud ntawm PDO Analog Range tus nqi, ces tus nqi analog tso tawm tiag tiag yuav raug teeb tsa rau ib qho ntawm
Peb xaiv POVR theem tom qab ncua 2-thib ob:
- Tsawg (default): 0V los yog 3.5 mA
- Siab: 10.5V los yog 20.5 mA
- Tuav: Qib khaws cov nqi yav dhau los indefinitely
Nco tseg: Yog tias qhov txuas IO-Link sensor hloov rov qab mus rau SIO hom, ces tus nqi dhau los yuav raug tuav.
- PFM tawm Ua kom muaj PFM sawv cev ntawm ib qho analog input raws li cov zis.
- PFM Input Source Channel Xaiv tus nqi analog input los ntawm Chaw nres nkoj 1 lossis Chaw nres nkoj 2 raws li PFM tso zis qhov chaw.
- Pulse Frequency Configuration Teeb tsa qhov ze thiab deb zaus qhov tseem ceeb.
Qhov taw qhia xwm txheej
R45C IO-Txuas rau Dual Analog Input-Output Converter muaj plaub lub teeb pom kev zoo LED ntawm ob sab rau IO-Txuas thiab kev sib txuas lus analog kom tso cai rau kev teeb tsa kev xav tau thiab tseem muab kev pom zoo txaus. Kuj tseem muaj qhov taw qhia ntsuab LED ntawm ob sab ntawm lub converter, uas qhia txog lub zog ntawm lub cuab yeej.
| IO-Txuas Amber LED | |
| Qhov taw qhia | xwm txheej |
| Tawm | IO-Link kev sib txuas lus tsis muaj nyob |
| Flashing Amber (900 ms On, 100 ms Tawm) | IO-Link kev sib txuas lus tau ua haujlwm |
| Analog hauv Amber LED | |
| Qhov taw qhia | xwm txheej |
| Tawm | Analog tam sim no tus nqi tsawg dua setpoint SP1 LOSSIS analog nqi ntau dua setpoint SP2 |
| Khoom Amber | Analog tam sim no tus nqi yog nruab nrab ntawm setpoint SP1 THIAB setpoint SP2 |
| Default Current Values: Default Voltage Tus nqi:
• SP1 = 0.004 A • SP1 = 0 V • SP2 = 0.02 A • SP2 = 10 V |
|
| Analog Tawm Amber LED | |
| Qhov taw qhia | xwm txheej |
| Tawm | Tig tawm yog tias sau PDO analog nqi yog sab nraum qhov tso zis ntau yam |
| Khoom Amber | Tig rau yog tias sau PDO analog nqi yog nyob rau hauv qhov tso zis ntau yam |
| Tso cai tam sim no ntau yam: 0 mA txog 24 mA
Tso cai Voltage Range: 0V txog 11V |
|
Cov lus qhia installation
Mechanical Installation
Nruab R45C tso cai rau kev nkag mus rau kev kuaj xyuas, kev saib xyuas, thiab kev pabcuam lossis hloov pauv. Tsis txhob nruab R45C hauv txoj hauv kev no kom tso cai rau kev yeej.
Tag nrho cov khoom siv mounting yog muab los ntawm tus neeg siv. Fasteners yuav tsum muaj lub zog txaus los tiv thaiv kev tawg. Kev siv cov fasteners mus tas li lossis cov khoom siv xauv xauv yog pom zoo kom tiv thaiv kom tsis txhob xoob lossis txav ntawm lub cuab yeej. Lub qhov mounting (4.5 hli) hauv R45C txais M4 (#8) kho vajtse. Saib daim duab hauv qab no los pab txiav txim qhov tsawg kawg nkaus ntsia hlau ntev.
CEEB TOOM: Tsis txhob overtighten R45C's mounting ntsia hlau thaum lub sij hawm installation. Overtightening tuaj yeem cuam tshuam kev ua haujlwm ntawm R45C.
Cov kab kos duab
| Txiv neej (IO-Link Tswv) | Teeb liab Kev piav qhia |
| Tus Pin 1 | 18V DC rau 30V DC |
| Tus Pin 2 | PFM/Banner tshwj xeeb |
| Tus Pin 3 | Hauv av |
| Tus Pin 4 | IO Link |
| Poj niam (Analog 1) | Teeb liab Kev piav qhia |
| Tus Pin 1 | 18V DC rau 30V DC |
| Tus Pin 2 | Analog 1 Hauv |
| Tus Pin 3 | Hauv av |
| Tus Pin 4 | Analog 1 tawm |
| Poj niam (Analog 2) | Teeb liab Kev piav qhia |
| Tus Pin 1 | 18V DC rau 30V DC |
| Tus Pin 2 | Analog 2 Hauv |
| Tus Pin 3 | Hauv av |
| Tus Pin 4 | Analog 2 tawm |
IO-Link®
IO-Link® yog ib qho kev sib txuas lus sib txuas ntawm tus tswv cuab thiab lub sensor thiab / lossis lub teeb. Nws tuaj yeem siv los txiav cov ntsuas ntsuas ntsuas lossis teeb thiab xa cov ntaub ntawv txheej txheem. Rau qhov tseeb IO-Link raws tu qauv thiab specifications, thov mus saib www.io-link.com.
Rau qhov tseeb IODD files, thov xa mus rau Banner Engineering Corp webqhov chaw ntawm: www.bannerengineering.com.
Kev teeb tsa
Qhov ntsuas tam sim no muaj nyob ntawm Cov Ntaub Ntawv Txheej Txheem raws li qhov ntsuas tus nqi μA, thiab voltage muaj nyob rau hauv mV. Yog xav paub ntxiv, saib Banner P/N 228482 R45C-KUUII-UUIIQ IO-Link Cov Ntaub Ntawv Qhia Txog Kev Qhia thiab Banner P/N 228483 R45C-KUII-UUIIQ IOLINK IODD Files.
Specifications
- Kev muab khoom Voltage 18V DC rau 30V DC ntawm 50 mA siab tshaj plaws
- Hwj chim Pass-through Tam sim no 4 Qhov siab tshaj plaws Analog Input Impedance
- Tam sim no version: Kwv yees li 450 ohms Voltage version: Kwv yees li 14.3K ohms
- Analog Output Load Resistance
- Tam sim no version: 1 kilo-ohm siab tshaj load kuj ntawm 24 V DC Maximum Load Resistance = [(Vcc – 4.5) ÷ 0.02 ohms]
- Voltage version: 2.5 kilo-ohms yam tsawg kawg nkaus load kuj
- Kev muab khoom Kev tiv thaiv Circuitry Tiv thaiv rov qab polarity thiab kev hloov pauv voltages
- Cov dej ntws tawm Tam sim no Kev tiv thaiv 400 µA
- Kev daws teeb meem 14 bits
- Kev sib txuas Integral txiv neej / poj niam 4-pin M12 ceev disconnect
- Kev tsim kho Coupling Khoom: Nickel-plated tooj dag Connector Lub cev: PVC translucent dub
- Environmental Rating IP65, IP67, IP68 UL Hom 1
- Kev khiav haujlwm Cov xwm txheej
- Kub: -40 ° C txog +60 ° C (-40 ° F txog +140 ° F) 90% ntawm +60 ° C siab tshaj qhov txheeb ze cov av (tsis ua kom txias)
- Cia kub: -40 ° C rau + 80 ° C (-40 ° F txog + 176 ° F)
- Qhov tseeb 0.5%
- Qhov taw qhia
- Ntsuab: Hwj chim
- Amber: IO-Txuas kev sib txuas lus
- Amber: Analog input nqi tam sim no
- Amber: Analog tso zis nqi nyob rau hauv ntau yam
- Kev co thiab Mechanical Shock Ua tau raws li IEC 60068-2-6 cov kev cai (Vibration: 10 Hz txog 55 Hz, 0.5 mm) ampLitude, 5 feeb cheb, 30 feeb nyob twj ywm) Ua tau raws li IEC 60068-2-27 qhov yuav tsum tau (Kev poob siab: 15G 11 ms ntev, ib nrab sine yoj)
Yuav tsum muaj kev tiv thaiv overcurrent
CEEB TOOM: Kev sib txuas hluav taws xob yuav tsum tau ua los ntawm cov neeg ua haujlwm tsim nyog raws li cov cai hauv zos thiab lub teb chaws thiab cov cai.
Kev tiv thaiv overcurrent yuav tsum tau muab los ntawm qhov kawg ntawm daim ntawv thov khoom ib lub rooj muab. Kev tiv thaiv overcurrent tuaj yeem muab nrog kev sib txuas sab nraud lossis los ntawm Kev Txwv Tam Sim No, Chav Kawm 2 Fais Fab. Kev xaim xaim xaim <24 AWG yuav tsum tsis txhob sib dhos. Rau kev txhawb nqa khoom ntxiv, mus rau www.bannerengineering.com.
| Kev muab khoom Kev xaim (AWG) | Yuav tsum tau Overcurrent Kev tiv thaiv (Amps) |
| 20 | 5.0 |
| 22 | 3.0 |
| 24 | 2.0 |
| 26 | 1.0 |
| 28 | 0.8 |
| 30 | 0.5 |
Qhov ntev
Txhua qhov kev ntsuas tau teev tseg hauv millimeters [inches], tshwj tsis yog sau tseg lwm yam.
Cov khoom siv
Cordsets
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. lav nws cov khoom kom tsis muaj qhov tsis xws luag hauv cov khoom siv thiab kev ua haujlwm rau ib xyoos tom qab hnub xa khoom. Banner Engineering Corp. yuav kho lossis hloov, tsis pub dawb, txhua yam khoom ntawm nws cov khoom siv uas, thaum lub sijhawm nws raug xa rov qab mus rau lub Hoobkas, pom tias muaj kev puas tsuaj thaum lub sijhawm lav. Qhov kev lees paub no tsis suav nrog kev puas tsuaj lossis kev lav phib xaub rau kev siv tsis raug, kev tsim txom, lossis kev thov tsis raug lossis kev teeb tsa ntawm Banner cov khoom.
Qhov kev txwv txwv tsis pub tshaj tawm no yog tshwj xeeb thiab ua raws li tag nrho lwm qhov kev lav phib xaub txawm hais tias nthuav tawm lossis hais qhia (nrog rau, tsis muaj
LIMITATION, TXOJ CAI NTAWM CHAW UA HAUJ LWM HAUV LUB CHAW UA HAUJ LWM NTAWM LUB SIJ HAWM), thiab txawm tias tshwm sim hauv chav kawm
Kev ua tau zoo, Course of DEALING OR TRADE SAGE.
Qhov Warranty no tshwj xeeb thiab txwv rau kev kho lossis, ntawm kev txiav txim siab ntawm Banner Engineering Corp., hloov. TSIS MUAJ IB TUG NYIAJ NYIAJ
ENGINEERING CORP. YUAV TSUM TAU TXAIS RAU HAUV LUB CHAW UA HAUJ LWM HAUJ LWM HAUJ LWM LOS NTAWM LUB TSEV KAWM NTAWV LOS NTAWM COV NTAUB NTAWV THOV KEV PAB CUAM TSHUAJ TIV THAIV THIAB KEV PAB CUAM
Cov txiaj ntsig, lossis ib qho xwm txheej, qhov tshwm sim lossis kev puas tsuaj tshwj xeeb uas tshwm sim los ntawm ib qho khoom tsis raug lossis los ntawm kev siv lossis
TSIS TXAUS SIAB RAU HAUV QHOV CHAW UA HAUJ LWM, txawm tias tshwm sim hauv kev cog lus lossis kev lav phib xaub, txoj cai lij choj, TORT, nruj kev lav phib xaub, tsis saib xyuas, lossis
LWM YAM.
Banner Engineering Corp. muaj txoj cai los hloov, hloov kho lossis txhim kho tus qauv tsim ntawm cov khoom yam tsis tas yuav tsum muaj kev lav phib xaub lossis kev lav phib xaub ntsig txog ib yam khoom uas tau tsim los ntawm Banner Engineering Corp. Txhua yam kev siv tsis raug, kev tsim txom, lossis kev siv tsis raug lossis kev teeb tsa ntawm cov khoom no lossis siv. ntawm cov khoom lag luam rau daim ntawv thov kev tiv thaiv tus kheej thaum cov khoom raug txheeb xyuas tias tsis tau npaj rau cov laj thawj zoo li no yuav ua rau cov khoom lav tsis tau. Txhua qhov kev hloov kho rau cov khoom no yam tsis muaj kev pom zoo ua ntej los ntawm Banner Engineering Corp yuav ua rau cov khoom lav tsis tau. Txhua qhov tshwj xeeb tshaj tawm hauv daim ntawv no yuav raug hloov pauv; Banner muaj txoj cai los hloov kho cov khoom specifications lossis hloov kho cov ntaub ntawv txhua lub sijhawm. Cov lus qhia tshwj xeeb thiab cov khoom lag luam cov ntaub ntawv ua lus Askiv hloov pauv uas tau muab ua lwm hom lus.
Rau cov ntawv tshiab tshaj plaws ntawm cov ntaub ntawv, xa mus rau: www.bannerengineering.com.
Rau cov ntaub ntawv patent, saib www.bannerengineering.com/patents.
FCC Part 15 Chav Kawm B
Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class B cov cuab yeej digital, ua raws li Tshooj 15 ntawm FCC Txoj Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tsim, siv thiab tuaj yeem ua kom lub zog ntawm lub xov tooj cua thiab, yog tias tsis tau nruab thiab siv raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj teeb meem cuam tshuam rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov cuab yeej tawm thiab qhib,
Tus neeg siv raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:
- Reorient los yog tshem tawm cov kav hlau txais xov.
- Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
- Txuas cov cuab yeej mus rau lub qhov hluav taws xob ntawm ib lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
- Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.
Kev lag luam Canada Cov cuab yeej no ua raws li CAN ICES-3 (B) / NMB-3(B). Kev ua haujlwm yog ua raws li ob yam hauv qab no: 1) Cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam loj; thiab 2) Cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis xav tau. Cet appareil yog conforme norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du disposité.
Cov ntaub ntawv / Cov ntaub ntawv
 |
BANNER R45C IO-Txuas rau Dual Analog Input-Output Converter [ua pdf] Phau ntawv qhia R45C IO-Txuas rau Dual Analog Input-Output Converter, R45C, IO-Txuas rau Dual Analog Input-Output Converter, Dual Analog Input-Output Converter, Analog Input-Output Converter, Input-Output Converter, Converter |
 |
BANNER R45C IO-Txuas rau Dual Analog Input-Output Converter [ua pdf] Cov neeg siv phau ntawv qhia R45C IO-Txuas rau Dual Analog Input-Output Converter, R45C IO-Txuas rau, Dual Analog Input-Output Converter, tso zis Converter, Converter |
