Arduino Nano RP2040 Txuas Nrog Headers
Specifications
- Nco: AT25SF128A 16MB NOR Flash
- QSPI Data Transfer Rate: Mus txog 532 Mbps
- Program/Erase Cycles: 100k ua
Nta:
- Advanced pedometer, kauj ruam detector, thiab kauj ruam txee
- Qhov tseem ceeb ntawm kev txav mus los, Tilt nrhiav pom
- Standard cuam tshuam: dawb-lub caij nplooj zeeg, sawv-up, 6D / 4D orientation, nyem thiab ob-nias
- Programmable finite state tshuab: accelerometer, gyroscope, thiab lwm yam sensors
- Machine Learning Core
- Embedded kub sensor
- Sab hauv High-Quality NIST SP 800-90A / B / C Random Number Generator (RNG)
- Kev them nyiaj yug ruaj ntseg khau raj:
- Tag Nrho ECDSA code kos npe validation
- Yeem khaws cia digest/kos npe
- Optional kev sib txuas lus tseem ceeb disablement ua ntej yuav khau raj ruaj ntseg
- Encryption/Authentication rau cov lus los tiv thaiv on-board tawm tsam
- I/O: 14 x Digital Pin, 8 x Analog Pin
- Interfaces: Micro USB, UART, SPI, I2C Kev them nyiaj yug
- Lub zog: Buck kauj ruam-down converter
Cov lus qhia siv khoom
Pib pib
Yuav pib siv cov khoom:
- Txuas lub rooj tsavxwm rau koj lub computer siv Micro USB cable.
- Nruab qhov tsim nyog IDE lossis siv Arduino Web Editor/Arduino Huab.
Programming
Txhawm rau program lub rooj tsavxwm:
- Sau koj tus lej lossis siv sample sketches muab.
- Upload cov cai rau lub rooj tsavxwm los ntawm kev xaiv interface (UART, SPI, I2C).
Lub hwj chim On / Off
Ua kom lub zog ntawm lub rooj tsavxwm:
- Xyuas kom cov input voltage ua tau raws li kev pom zoo ua haujlwm.
- Txuas lub hwj chim los yog USB txuas rau lub hwj chim ntawm lub rooj tsavxwm.
Cov lus nug nquag nug (FAQ)
- Q: Dab tsi yog qhov kev pom zoo ua haujlwm rau lub rooj tsavxwm no?
A: Cov kev pom zoo ua haujlwm muaj xws li cov tswv yim voltage ntau ntawm 4.75V txog 5.25V, nrog rau 3.3V tso zis rau cov neeg siv daim ntawv thov thiab qhov siab tshaj plaws ua haujlwm kub ntawm 80 ° C. - Q: Kuv tuaj yeem rov qab tau lub rooj tsavxwm li cas thaum muaj teeb meem?
A: Koj tuaj yeem xa mus rau ntu "Board Recovery" hauv phau ntawv qhia rau cov kauj ruam ntawm kev rov qab los ntawm pawg thawj coj saib thaum muaj teeb meem. - Kev piav qhia
Lub feature-packed Arduino® Nano RP2040 Txuas coj tus tshiab Raspberry Pi RP2040 microcontroller rau Nano daim ntawv zoo. Ua kom zoo tshaj plaws ntawm dual-core 32-ntsis Arm® Cortex®-M0+ los ua Internet ntawm Tej yaam num nrog Bluetooth® thiab Wi-Fi kev sib txuas ua tsaug rau U-blox® Nina W102 module. Nkag mus rau hauv qhov project tiag tiag nrog lub onboard accelerometer, gyroscope, RGB LED, thiab microphone. Tsim kom muaj zog embedded AI cov kev daws teeb meem nrog tsawg kawg nkaus siv Arduino® Nano RP2040 Txuas!
Lub hom phiaj
Internet of Things (IoT), kev kawm tshuab, kev tsim qauv,
Nta
- Raspberry Pi RP2040 Microcontroller
- 133MHz 32 ntsis Dual Core Arm® Cortex®-M0+
- 264 kB ntawm-chip SRAM
- Direct Memory Access (DMA) maub los
- Kev them nyiaj yug mus txog 16MB ntawm OF-chip Flash nco los ntawm kev mob siab rau QSPI tsheb npav USB 1.1 maub los thiab PHY, nrog tus tswv tsev thiab cov khoom txhawb nqa
- 8 PIO lub xeev cov tshuab
- Programmable IO (PIO) rau kev txhawb nqa peripheral txuas ntxiv
- 4 channel ADC nrog ntsuas kub sab hauv, 0.5 MSa / s, 12-ntsis hloov pauv SWD Debugging
- 2 on-chip PLLs los tsim USB thiab core moos
- 40nm txheej txheem node
- Muaj ntau hom kev txhawb zog qis
- USB 1.1 Host/Device
- Sab Hauv Voltage Regulator muab cov tub ntxhais voltage
- Advanced High-performance Bus (AHB) / Advanced Peripheral Bus (APB)
- U-blox® Nina W102 Wi-Fi/Bluetooth® Module
- 240MHz 32 ntsis Dual Core Xtensa LX6
- 520 kB ntawm-chip SRAM
- 448 Kbyte ROM rau booting thiab core functions
- 16 Mbit FLASH rau cov lej khaws cia suav nrog kho vajtse encryption los tiv thaiv cov haujlwm thiab cov ntaub ntawv
- 1 kbit EFUSE (non- erasable nco) rau MAC chaw nyob, module configuration, Flash-Encryption, thiab Chip-ID
- IEEE 802.11b/g/n ib leeg-band 2.4 GHz Wi-nkaus ua haujlwm
- Bluetooth® 4.2
- Integrated Planar Inverted-F Kav hlau txais xov (PIFA)
- 4 x 12-ntsis ADC
- 3 x I2C, SDIO, CAN, QSPI
- Nco
- AT25SF128A 16MB NOR Flash
- QSPI cov ntaub ntawv hloov pauv mus txog 532Mbps
- 100K program / tshem tawm cov voj voog
- ST LSM6DSOXTR 6-axis IMU
- 3D Gyroscope
- ± 2 / ± 4 / ± 8 / ± 16g tag nrho teev
- 3D Accelerometer
- ± 125 / ± 250 / ± 500 / ± 1000 / ± 2000 dps tag nrho teev
- Advanced pedometer, kauj ruam ntes thiab kauj ruam txee
- Qhov tseem ceeb ntawm kev txav chaw, Tilt detection
- Standard interrupts: dawb-lub caij nplooj zeeg, wake-up, 6D / 4D orientation, nias thiab ob-nias Programmable finnite lub xeev tshuab: accelerometer, gyroscope thiab sab nraud sensors Tshuab Kawm Core
- Embedded kub sensor
- 3D Gyroscope
- ST MP34DT06JTR MEMS Microphone
- PIB = 122.5 dBSPL
- 64 dB teeb liab-rau-nruab piv piv
- Omnidirectional rhiab heev
- -26 dBFS ± 1 dB rhiab heev
- RGB LED teeb
- Cov Anode
- Txuas nrog U-blox® Nina W102 GPIO
- Microchip® ATECC608A Crypto
- Cryptographic Co-Processor nrog ruaj ntseg Hardware-based Key Storage
- I2C, SWV
- Hardware Support rau Symmetrical algorithms:
- SHA-256 & HMAC Hash suav nrog OF-chip ntsiab lus txuag / rov qab
- AES-128: Encrypt/Decrypt, Galois Field Multiply rau GCM
- Sab hauv High-Quality NIST SP 800-90A / B / C Random Number Generator (RNG)
- Kev them nyiaj yug ruaj ntseg khau raj:
- Tag Nrho ECDSA code kos npe validation, xaiv khaws cia digest / kos npe
- Optional kev sib txuas lus tseem ceeb disablement ua ntej yuav khau raj ruaj ntseg
- Encryption/Authentication rau cov lus los tiv thaiv on-board tawm tsam
- I/O
- 14 x Digital Pin
- 8 x Analog Pin
- Micro USB
- UART, SPI, I2C Kev them nyiaj yug
- Hwj chim
- Buck kauj ruam-down converter
- Cov ntaub ntawv kev nyab xeeb
- Chav Kawm A
Lub Rooj Tswjhwm Saib
Daim ntawv thov Examples
- Arduino® Nano RP2040 Txuas tuaj yeem hloov kho rau ntau yam kev siv ua tsaug rau lub zog microprocessor, ntau yam ntawm onboard sensors thiab Nano form factor. Cov ntawv thov uas muaj xws li:
- Edge Computing: Ua kom siv ceev thiab siab RAM microprocessor los khiav TinyML rau kev kuaj pom tsis zoo, kuaj hnoos, ntsuas taw qhia, thiab lwm yam.
- Wearable Devices: Tus me Nano hneev taw muaj peev xwm muab kev kawm tshuab rau ntau yam ntawm cov khoom siv hnav nrog rau cov kis las ncaws pob thiab VR tswj.
- Lub suab pab: Arduino® Nano RP2040 Connect suav nrog omnidirectional microphone uas tuaj yeem ua raws li koj tus kws pabcuam digital thiab pab tswj lub suab rau koj cov haujlwm.
Cov khoom siv
- Micro USB cable
- 15-pin 2.54mm txiv neej headers
- 15-pin 2.54mm stackable headers
Yam khoom
- Lub ntiajteb txawj nqus: Nano I/O Shield
Kev ntsuas
Pom zoo rau kev ua haujlwm
| Cim | Kev piav qhia | Min | Ntaus | Max | Chav tsev |
| VIN | Cov lus qhia voltage los ntawm VIN pad | 4 | 5 | 20 | V |
| VUSB | Cov lus qhia voltage los ntawm USB connector | 4.75 | 5 | 5.25 | V |
| Wb 3v3 | 3.3V tso zis rau cov neeg siv daim ntawv thov | 3.25 | 3.3 | 3.35 | V |
| kuv 3v3 | 3.3V tso zis tam sim no (xws li onboard IC) | – | – | 800 | mA |
| VIH | Input high-level voltage | 2.31 | – | 3.3 | V |
| VIL | Input low-level voltage | 0 | – | 0.99 | V |
| IOH Max | Tam sim no ntawm VDD-0.4 V, tso zis siab | 8 | mA | ||
| IOL Max | Tam sim no ntawm VSS + 0.4 V, tso zis tawm qis | 8 | mA | ||
| VOH | Cov zis siab voltage,8m ua | 2.7 | – | 3.3 | V |
| VOL | Tso zis tsawg voltage,8m ua | 0 | – | 0.4 | V |
| TOP | Ua haujlwm kub | - 20 Nws | – | 80 | °C |
Kev siv fais fab
| Cim | Kev piav qhia | Min | Ntaus | Max | Chav tsev |
| PBL | Kev siv lub zog nrog lub voj voog tsis khoom | TBC | mW | ||
| PLP | Kev siv hluav taws xob hauv hom qis zog | TBC | mW | ||
| PMAX | Kev siv hluav taws xob siab tshaj plaws | TBC | mW |
Muaj nuj nqi Tshajview
Thaiv tau Diagram
Board Topology
Pem hauv ntej View
| Ref. | Kev piav qhia | Ref. | Kev piav qhia |
| U1 | Raspberry Pi RP2040 Microcontroller | U2 | Ublox NINA-W102-00B Wi-Fi/Bluetooth® Module |
| U3 | N/A | U4 | ATECC608A-MAHDA-T Crypto IC |
| U5 | AT25SF128A-MHB-T 16MB Flash IC | U6 | MP2322GQH Kauj ruam-Down Buck Regulator |
| U7 | DSC6111HI2B-012.0000 MEMS Oscillator | U8 | MP34DT06JTR MEMS Omnidirectional Microphone IC |
| U9 | LSM6DSOXTR 6-axis IMU nrog Tshuab Kawm Core | J1 | Txiv neej Micro USB Connector |
| DL1 | Green Power On LED | DL2 | Builtin Txiv kab ntxwv LED |
| DL3 | RGB Common Anode LED | PB 1 | Pib dua khawm |
| jp2 ua | Analog Pin + D13 Pins | jp3 ua | Digital Pins |
Rov qab View
| Ref. | Kev piav qhia | Ref. | Kev piav qhia |
| SJ 4 | 3.3V jumper (txuas) | SJ 1 | VUSB jumper (tsis txuas) |
Processor
- Lub processor yog raws li tus tshiab Raspberry Pi RP2040 silicon (U1). Lub microcontroller no muab sijhawm rau kev tsim kho lub zog qis hauv Is Taws Nem ntawm Yam (IoT) thiab embedded machine learning. Ob lub symmetric Arm® Cortex®-M0+ clocked ntawm 133MHz muab kev suav lub zog rau kev siv tshuab kev kawm thiab kev ua tib yam nrog kev siv hluav taws xob tsawg. Rau lub tsev txhab nyiaj ywj pheej ntawm 264 KB SRAM thiab 2MB tau muab. Direct memory access muab kev sib txuas ceev ceev ntawm cov processors thiab lub cim xeeb uas tuaj yeem ua rau tsis muaj zog nrog rau cov tub ntxhais kom nkag mus rau lub xeev pw tsaug zog. Serial wire debug (SWD) yog muaj los ntawm khau raj ntawm cov ntaub qhwv hauv qab lub rooj tsavxwm. Lub RP2040 khiav ntawm 3.3V thiab muaj ib qho voltage regulator muab 1.1V.
- RP2040 tswj cov khoom siv peripherals thiab digital pins, nrog rau cov pins analog (A0-A3). Cov kev sib txuas I2C ntawm tus pins A4 (SDA) thiab A5 (SCL) yog siv rau kev sib txuas rau cov khoom siv hluav taws xob thiab raug rub nrog 4.7 kΩ resistor. SWD Clock kab (SWCLK) thiab rov pib dua kuj tau rub nrog 4.7 kΩ resistor. Ib qho sab nraud MEMS oscillator (U7) khiav ntawm 12MHz muab lub moos mem tes. Programmable IO pab rau kev siv cov txheej txheem kev sib txuas lus arbitrary nrog lub nra me me ntawm cov txheej txheem tseem ceeb. USB 1.1 ntaus ntawv interface yog siv rau ntawm RP2040 rau uploading code.
Wi-Fi/Bluetooth® Connectivity
Wi-Fi thiab Bluetooth® txuas yog muab los ntawm Nina W102 (U2) module. Lub RP2040 tsuas muaj 4 tus pins analog, thiab Nina yog siv los txuas ntxiv mus rau tag nrho yim raws li tus qauv hauv Arduino Nano daim ntawv foos nrog lwm 4 12-ntsis analog inputs (A4-A7). Tsis tas li ntawd, cov anode RGB LED kuj tseem tswj hwm los ntawm Nina W-102 module xws li LED tawm thaum lub xeev digital siab thiab thaum lub xeev digital qis. Sab hauv PCB kav hlau txais xov hauv lub module tshem tawm qhov xav tau rau ib lub kav hlau txais xov sab nraud. Nina W102 module kuj suav nrog dual core Xtensa LX6 CPU uas tseem tuaj yeem ua haujlwm ntawm nws tus kheej ntawm RP2040 los ntawm cov ntaub qhwv hauv qab lub rooj tsavxwm siv SWD.
6 axis IMU
Nws tuaj yeem tau txais 3D gyroscope thiab 3D accelerometer cov ntaub ntawv los ntawm LSM6DSOX 6-axis IMU (U9). Ntxiv nrog rau kev muab cov ntaub ntawv zoo li no, nws tseem tuaj yeem ua lub tshuab kev kawm ntawm IMU rau kev paub txog kev taw qhia.
Sab Nraud Memory
Lub RP2040 (U1) tau nkag mus rau ib qho ntxiv 16 MB ntawm flash nco ntawm QSPI interface. Lub execute-in-place (XIP) feature ntawm RP2040 tso cai rau sab nraud flash nco tau hais thiab nkag los ntawm lub kaw lus zoo li nws yog lub cim xeeb sab hauv, yam tsis tau luam thawj cov lej rau hauv lub cim xeeb.
Cryptography
ATECC608A Cryptographic IC (U4) muab kev ruaj ntseg khau raj nrog rau SHA thiab AES-128 encryption / decryption txhawb kev ruaj ntseg hauv Smart Home thiab Industrial IoT (IIoT) daim ntawv thov. Tsis tas li ntawd, tus naj npawb random generator kuj muaj rau siv los ntawm RP2040.
Microphone
Lub MP34DT06J microphone txuas nrog ntawm PDM interface rau RP2040. Cov digital MEMS microphone yog omnidirectional thiab ua haujlwm ntawm lub peev xwm ntsuas qhov ntsuas nrog siab (64 dB) teeb liab rau suab nrov piv. Lub ntsiab lus pom, muaj peev xwm txheeb xyuas cov acoustic tsis, yog tsim los siv cov txheej txheem tshwj xeeb silicon micromachining nplooj siab los tsim cov suab sensors.
RGB LED teeb
RGB LED (DL3) yog ib qho anode LED uas txuas nrog Nina W102 module. Lub LED tau tawm thaum lub xeev digital yog HIGH thiab thaum lub xeev digital qis.
Tsob Ntoo Tsob Ntoo
Lub Arduino Nano RP2040 Txuas tuaj yeem siv tau los ntawm Micro USB chaw nres nkoj (J1) lossis hloov ntawm VIN ntawm JP2. Ib qho onboard puck converter muab 3V3 rau RP2040 microcontroller thiab tag nrho lwm yam khoom siv. Tsis tas li ntawd, RP2040 kuj muaj ib qho 1V8 regulator.
Board ua haujlwm
Pib Pib - IDE
Yog tias koj xav ua koj lub Arduino® Nano RP2040 Txuas thaum offline koj yuav tsum tau nruab Arduino® Desktop IDE [1] Txhawm rau txuas Arduino® Edge tswj rau koj lub computer, koj yuav xav tau micro USB cable. Qhov no tseem muab lub zog rau lub rooj tsavxwm, raws li qhia los ntawm LED.
Pib - Arduino Web Editor
Txhua Arduino® boards, suav nrog qhov no, ua haujlwm tawm ntawm Arduino® Web Editor [2], los ntawm kev txhim kho ib qho yooj yim plugin.
Lub Arduino® Web Editor yog hosted hauv online, yog li nws yuav ib txwm hloov tshiab nrog cov yam ntxwv tshiab thiab kev txhawb nqa rau txhua lub rooj tsavxwm. Ua raws li [3] pib coding ntawm browser thiab upload koj cov duab kos rau hauv koj lub rooj tsavxwm.
Pib Pib - Arduino Huab
Tag nrho Arduino® IoT cov khoom lag luam tau txais kev txhawb nqa ntawm Arduino® IoT Huab uas tso cai rau koj nkag mus, teeb tsa thiab txheeb xyuas cov ntaub ntawv sensor, ua rau muaj xwm txheej, thiab ua kom koj lub tsev lossis kev lag luam.
Sampua Sketch
Sample sketches rau Arduino® Nano RP2040 Txuas tuaj yeem pom nyob rau hauv "Examples” zaub mov hauv Arduino® IDE lossis hauv ntu “Cov ntaub ntawv” ntawm Arduino website [4]
Cov peev txheej online
Tam sim no koj tau dhau los ntawm cov hauv paus ntawm qhov koj tuaj yeem ua nrog lub rooj tsavxwm koj tuaj yeem tshawb nrhiav qhov tsis muaj qhov kawg uas nws muab los ntawm kev tshuaj xyuas cov haujlwm zoo siab ntawm ProjectHub [5], Arduino® Library Reference [6] thiab lub khw hauv online [7] qhov twg Koj tuaj yeem ua kom tiav koj lub rooj tsavxwm nrog sensors, actuators thiab ntau dua.
Board rov qab
Tag nrho cov Arduino boards muaj ib tug built-in bootloader uas tso cai rau flashing lub rooj tsavxwm ntawm USB. Nyob rau hauv cov ntaub ntawv ib tug sketch locks li processor thiab lub rooj tsavxwm tsis ncav cuag tau lawm ntawm USB nws muaj peev xwm mus nkag rau bootloader hom los ntawm doubletapping lub reset khawm tam sim ntawd tom qab fais fab tuag.
Txuas Pinouts
J1 Micro USB
| Pin | Muaj nuj nqi | Hom | Kev piav qhia |
| 1 | V-BUS | Hwj chim | 5V USB zog |
| 2 | D- | Qhov txawv | USB cov ntaub ntawv sib txawv - |
| 3 | D+ | Qhov txawv | USB cov ntaub ntawv sib txawv + |
| 4 | ID | Digital | Tsis siv |
| 5 | GND | Hwj chim | Hauv av |
jp1 ua
| Pin | Muaj nuj nqi | Hom | Kev piav qhia |
| 1 | TX 1 | Digital | UART TX / Digital Pin 1 |
| 2 | RX 0 | Digital | UART RX / Digital Pin 0 |
| 3 | RST | Digital | Rov pib dua |
| 4 | GND | Hwj chim | Hauv av |
| 5 | D2 | Digital | Digital Pin 2 |
| 6 | D3 | Digital | Digital Pin 3 |
| 7 | D4 | Digital | Digital Pin 4 |
| 8 | D5 | Digital | Digital Pin 5 |
| 9 | D6 | Digital | Digital Pin 6 |
| 10 | D7 | Digital | Digital Pin 7 |
| 11 | D8 | Digital | Digital Pin 8 |
| 12 | D9 | Digital | Digital Pin 9 |
| 13 | D10 | Digital | Digital Pin 10 |
| 14 | D11 | Digital | Digital Pin 11 |
| 15 | D12 | Digital | Digital Pin 12 |
jp2 ua
| Pin | Muaj nuj nqi | Hom | Kev piav qhia |
| 1 | D13 | Digital | Digital Pin 13 |
| 2 | 3.3v XNUMX | Hwj chim | 3.3V zog |
| 3 | REF | Analog | NC |
| 4 | A0 | Analog | Analog Pin 0 |
| 5 | A1 | Analog | Analog Pin 1 |
| 6 | A2 | Analog | Analog Pin 2 |
| 7 | A3 | Analog | Analog Pin 3 |
| 8 | A4 | Analog | Analog Pin 4 |
| 9 | A5 | Analog | Analog Pin 5 |
| 10 | A6 | Analog | Analog Pin 6 |
| 11 | A7 | Analog | Analog Pin 7 |
| 12 | VUSB | Hwj chim | USB tswv yim Voltage |
| 13 | REC | Digital | LUB TSEV |
| 14 | GND | Hwj chim | Hauv av |
| 15 | VIN | Hwj chim | Voltage Input |
Nco tseg: Cov ntaub ntawv analogue voltage yog tsau ntawm +3.3V. A0-A3 txuas nrog RP2040's ADC. A4-A7 txuas nrog Nina W102 ADC. Tsis tas li ntawd, A4 thiab A5 tau koom nrog I2C tsheb npav ntawm RP2040 thiab txhua tus rub nrog 4.7 KΩ resistors.
RP2040 SWD Pad
| Pin | Muaj nuj nqi | Hom | Kev piav qhia |
| 1 | SWDIO | Digital | SWD Data Line |
| 2 | GND | Digital | Hauv av |
| 3 | SWCLK | Digital | SWD Clock |
| 4 | +3V 3 | Digital | + 3V3 Fais Fab Rail |
| 5 | TP_RESETN | Digital | Rov pib dua |
Nina W102 SWD Pad
| Pin | Muaj nuj nqi | Hom | Kev piav qhia |
| 1 | TP_RST | Digital | Rov pib dua |
| 2 | TP_RX | Digital | Serial Rx ua |
| 3 | TP_TX | Digital | Serial Tx |
| 4 | TP_GPIO0 | Digital | GPIO 0 |
Cov ntaub ntawv siv tshuab
Cov ntawv pov thawj
Kev Tshaj Tawm Txog Kev Ua Raws Cai CE DoC (EU)
Peb tshaj tawm raws li peb lub luag haujlwm ib leeg tias cov khoom lag luam saum toj no ua raws li cov cai tseem ceeb ntawm EU Cov Lus Qhia hauv qab no thiab yog li tsim nyog rau kev txav mus los dawb hauv kev lag luam suav nrog European Union (EU) thiab European Economic Area (EEA).
Tshaj Tawm Txog Kev Ua Raws Li EU RoHS & REACH 211 01/19/2021
Arduino boards tau ua raws li RoHS 2 Directive 2011/65 / EU ntawm European Parliament thiab RoHS 3 Cov Lus Qhia 2015/863 / EU ntawm Pawg Sab Laj ntawm 4 Lub Rau Hli 2015 ntawm kev txwv tsis pub siv qee yam khoom siv phom sij hauv cov khoom siv hluav taws xob thiab hluav taws xob.
| Tshuaj | Qhov siab tshaj plaws (ppm) |
| Lead (Pb) Hmoob. | 1000 |
| Cadmium (Cd) | 100 |
| Mercury (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Tom ntej: Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis (2-Ethylhexyl) phthalate (DEHP) | 1000 |
| Tom ntej: Benzyl Butyl Phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Kev zam: Tsis muaj kev zam.
Arduino Boards tau ua raws li tag nrho cov kev cai ntawm European Union Regulation (EC) 1907 / 2006 hais txog Kev Sau Npe, Kev Ntsuam Xyuas, Kev Tso Cai thiab Kev Txwv Cov Tshuaj (REACH). Peb tshaj tawm tsis muaj SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), Cov Neeg Sib Tw Cov Ntawv Teev Npe ntawm Cov Khoom Muaj Teeb Meem Muaj Kev Txaus Siab rau kev tso cai tam sim no tso tawm los ntawm ECHA, muaj nyob rau hauv tag nrho cov khoom (thiab kuj pob) nyob rau hauv ntau npaum li cas nyob rau hauv ib tug concentration sib npaug los yog siab tshaj 0.1%. Rau qhov zoo tshaj plaws ntawm peb txoj kev paub, peb kuj tshaj tawm tias peb cov khoom tsis muaj ib qho ntawm cov khoom muaj npe nyob rau hauv "Daim Ntawv Tso Cai" (Annex XIV ntawm REACH cov cai) thiab Cov Khoom Muaj Kev Txaus Siab Siab (SVHC) hauv ib qho tseem ceeb raws li tau teev tseg. los ntawm Annex XVII ntawm Cov Neeg Sib Tw Cov Npe Tshaj Tawm los ntawm ECHA (European Chemical Agency) 1907/2006/EC.
FCC
Ib qho kev hloov pauv lossis kev hloov kho uas tsis tau pom zoo los ntawm pawg neeg saib xyuas kev ua raws cai tuaj yeem ua rau tus neeg siv txoj cai los khiav cov khoom siv.
Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev ua haujlwm yog ua raws li ob yam hauv qab no:
- Cov cuab yeej no yuav tsis ua teeb meem cuam tshuam
- Cov cuab yeej no yuav tsum lees txais kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau tsis muaj kev ua haujlwm.
FCC RF Radiation Exposure Statement:
- Lub Transmitter no yuav tsum tsis txhob muab tso rau hauv los yog ua haujlwm ua ke nrog lwm tus kav hlau txais xov lossis cov khoom xa tawm.
- Cov cuab yeej no ua raws li cov kev txwv ntawm RF hluav taws xob raug teeb tsa rau qhov chaw tsis muaj kev tswj hwm.
- Cov cuab yeej no yuav tsum tau nruab thiab ua haujlwm nrog qhov tsawg kawg nkaus ntawm 20cm ntawm lub tshuab hluav taws xob thiab koj lub cev.
Cov neeg siv phau ntawv rau cov khoom siv xov tooj cua tsis muaj ntawv tso cai yuav tsum muaj cov ntawv ceeb toom hauv qab no lossis sib npaug hauv qhov chaw pom tseeb hauv phau ntawv siv los yog ntawm lub cuab yeej lossis ob qho tib si. Cov cuab yeej no ua raws li Kev Lag Luam Canada daim ntawv tso cai-tsim RSS tus qauv (s). Kev ua haujlwm yog ua raws li ob yam hauv qab no:
- cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam
- cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam, suav nrog kev cuam tshuam uas yuav ua rau lub tshuab ua haujlwm tsis xav tau.
Ntawm no, Arduino Srl tshaj tawm tias cov khoom no ua raws li cov cai tseem ceeb thiab lwm yam kev cai ntawm Cov Lus Qhia 2014/53/EU. Cov khoom no raug tso cai siv nyob rau hauv tag nrho EU cov tswv cuab lub xeev. Ntawm no, Arduino Srl tshaj tawm tias cov khoom no ua raws li cov cai tseem ceeb thiab lwm yam kev cai ntawm Cov Lus Qhia 2014/53/EU. Cov khoom no raug tso cai siv nyob rau hauv tag nrho EU cov tswv cuab lub xeev.
| Ntau zaus | Maximum Effective Isotropic Radiated Power (EIRP) |
| TBC | TBC |
Cov ntaub ntawv tuam txhab
| Lub tuam txhab npe | Arduino Srl |
| Chaw Nyob | Ntawm Andrea Appiani, 2520900 MONZA |
Cov ntaub ntawv siv
| Ref | Txuas |
| Arduino IDE (Desktop) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (Huab) | https://create.arduino.cc/editor |
| Cloud IDE Pib Pib | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino- web-editor-4b3e4a |
| Arduino Webqhov chaw | https://www.arduino.cc/ |
| Qhov project Hub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| PDM (microphone) Library | https://www.arduino.cc/en/Reference/PDM |
| WiFiNINA (Wi-Fi, W102)
Lub tsev qiv ntawv |
https://www.arduino.cc/en/Reference/WiFiNINA |
| ArduinoBLE (Bluetooth®, W-102) Library | https://www.arduino.cc/en/Reference/ArduinoBLE |
| IMU Library | https://reference.arduino.cc/reference/en/libraries/arduino_lsm6ds3/ |
| Khw Online | https://store.arduino.cc/ |
Kev kho keeb kwm
| Hnub tim | Kev kho dua | Hloov |
| 12/07/2022 | 3 | Kho tshiab kho tshiab |
| 02/12/2021 | 2 | Cov kev hloov pauv tau thov kom muaj ntawv pov thawj |
| 14/05/2020 | 1 | Thawj Tso |
Arduino® Nano RP2040 Txuas
Kho tshiab: 16/02/2024
Cov ntaub ntawv / Cov ntaub ntawv
 |
Arduino Nano RP2040 Txuas Nrog Headers [ua pdf] Phau ntawv qhia ABX00053, Nano RP2040 Txuas Nrog Headers, Nano RP2040, Txuas Nrog Headers, Headers |