Arduino Nano RP2040 Haɗa Tare da Masu kai
Ƙayyadaddun bayanai
- Ƙwaƙwalwar ajiya: AT25SF128A 16MB KO Flash
- Matsakaicin Canja wurin Bayanan QSPI: Har zuwa 532Mbps
- Shirye-shiryen / Goge Zagaye: 100K
Siffofin:
- Babban pedometer, mai gano mataki, da ma'aunin mataki
- Gano Muhimmin Motsi, Ganewar karkata
- Daidaitaccen katsewa: faɗuwa kyauta, farkawa, daidaitawar 6D/4D, danna kuma danna sau biyu
- Na'ura mai iyaka mai iyaka: accelerometer, gyroscope, da firikwensin waje
- Babban Koyon Injin
- Haɗe da firikwensin zafin jiki
- Babban Ingancin Ciki NIST SP 800-90A/B/C Mai Haɓakawa Mai Haɓakawa (RNG)
- Amintaccen Taimakon Taya:
- Cikakken ingantaccen lambar ECDSA
- Narke/sa hannu na zaɓin da aka adana
- Maɓallin maɓallin sadarwa na zaɓi kafin amintaccen taya
- Rufewa/Tabbataccen saƙon don hana harin kan jirgi
- I/O: 14x Digital Pin, 8x Analog Pin
- Hanyoyin sadarwa: Micro USB, UART, SPI, I2C Support
- Ƙarfi: Buck step-down Converter
Umarnin Amfani da samfur
Farawa
Don fara amfani da samfurin:
- Haɗa allon zuwa kwamfutarka ta amfani da kebul na USB Micro.
- Sanya IDE da ake buƙata ko amfani da Arduino Web Edita/Arduino Cloud.
Shirye-shirye
Don tsara allo:
- Rubuta lambar ku ko amfani da sampan bayar da zane-zane.
- Loda lambar zuwa allon ta hanyar dubawar da aka zaɓa (UART, SPI, I2C).
Kunnawa/Kashewa
Don kunna allo:
- Tabbatar da shigar da voltage ya gamu da shawarar yanayin aiki.
- Haɗa tushen wuta ko mai haɗin USB don kunna allo.
Tambayoyin da ake yawan yi (FAQ)
- Tambaya: Menene shawarar yanayin aiki na wannan hukumar?
A: Sharuɗɗan aiki da aka ba da shawarar sun haɗa da shigarwar voltage kewayon 4.75V zuwa 5.25V, tare da fitarwa na 3.3V zuwa aikace-aikacen mai amfani da matsakaicin zafin aiki na 80°C. - Tambaya: Ta yaya zan iya dawo da hukumar idan akwai matsala?
A: Kuna iya komawa zuwa sashin "Board farfadowa da na'ura" a cikin littafin don matakan dawo da hukumar idan akwai matsala. - Bayani
Haɗin Arduino® Nano RP2040 mai cike da fasalin yana kawo sabon Rasberi Pi RP2040 microcontroller zuwa nau'in nau'in Nano. Yi amfani da mafi yawan dual-core 32-bit Arm® Cortex®-M0+ don yin ayyukan Intanet na Abubuwa tare da haɗin Bluetooth® da Wi-Fi godiya ga tsarin U-blox® Nina W102. Nutse cikin ayyukan duniyar gaske tare da accelerometer, gyroscope, RGB LED, da makirufo. Haɓaka ingantattun hanyoyin AI masu ƙarfi tare da ƙaramin ƙoƙari ta amfani da Haɗin Arduino® Nano RP2040!
Yankunan Target
Intanet na Abubuwa (IoT), koyon inji, samfuri,
Siffofin
- Rasberi Pi RP2040 Microcontroller
- 133MHz 32bit Dual Core Arm® Cortex®-M0+
- 264kB on-chip SRAM
- Direct Memory Access (DMA) mai sarrafa
- Taimako don har zuwa 16MB na ƙwaƙwalwar ajiyar kashe-chip Flash ta hanyar keɓewar QSPI bas USB 1.1 mai sarrafawa da PHY, tare da mai watsa shiri da tallafin na'ura.
- 8 injunan jihar PIO
- IO mai shirye-shirye (PIO) don ƙarin tallafi na gefe
- 4 tashar ADC tare da firikwensin zafin jiki na ciki, 0.5 MSa/s, 12-bit hira SWD Debugging
- 2 on-chip PLLs don samar da USB da agogon tsakiya
- 40nm tsarin kumburi
- Goyan bayan yanayin ƙarancin ƙarfi da yawa
- USB 1.1 Mai watsa shiri / Na'ura
- Ciki Voltage Regulator don samar da ainihin voltage
- Babban Bus mai Haɓakawa (AHB)/Bas ɗin Bas ɗin Ciki (APB)
- U-blox® Nina W102 Wi-Fi/Bluetooth® Module
- 240MHz 32bit Dual Core Xtensa LX6
- 520kB on-chip SRAM
- 448 Kbyte ROM don booting da mahimman ayyuka
- 16 Mbit FLASH don ajiyar lamba gami da ɓoyayyen kayan aiki don kare shirye-shirye da bayanai
- 1 kbit EFUSE (ƙwaƙwalwar da ba za a iya gogewa ba) don adiresoshin MAC, daidaitawar module, ɓoye-fayil, da Chip-ID
- IEEE 802.11b/g/n guda-band 2.4 GHz Wi-Fi aiki
- Bluetooth ® 4.2
- Integrated Planar Inverted-F Eriya (PIFA)
- 4 x 12-bit ADC
- 3x I2C, SDIO, CAN, QSPI
- Ƙwaƙwalwar ajiya
- AT25SF128A 16MB KO Flash
- QSPI adadin canja wurin bayanai har zuwa 532Mbps
- 100K shirin / goge hawan keke
- ST LSM6DSOXTR 6-axis IMU
- 3D Gyroscope
- ± 2 / ± 4 / ± 8 / ± 16 g cikakken sikelin
- 3D Accelerometer
- ± 125 / ± 250 / ± 500 / ± 1000 / 2000 dps cikakken sikelin
- Advanced pedometer, mataki ganowa da mataki counter
- Muhimmin Gane Motsi, Ganewar karkata
- Daidaitaccen katsewa: faɗuwa kyauta, farkawa, 6D/4D fuskantarwa, danna kuma danna sau biyu na'ura mai iyaka iyaka: accelerometer, gyroscope da na'urori masu auna firikwensin waje na Koyon Injin
- Haɗe da firikwensin zafin jiki
- 3D Gyroscope
- Mai Rarraba ST MP34DT06JTR MEMS
- AOP = 122.5 dBSPL
- 64dB rabon sigina-zuwa amo
- Hankalin kai tsaye
- -26 dBFS ± 1 dB hankali
- LED RGB
- Anode gama gari
- Haɗa zuwa U-blox® Nina W102 GPIO
- Microchip® ATECC608A Crypto
- Co-Processor na Cryptographic tare da Tabbataccen Ma'ajiya na Tushen Hardware
- I2C, SWI
- Taimakon Hardware don Algorithms Symmetric:
- SHA-256 & HMAC Hash gami da kashe-chip mahallin ajiyewa/dawowa
- AES-128: Encrypt/Decrypt, Galois Filin Haɓaka don GCM
- Babban Ingancin Ciki NIST SP 800-90A/B/C Mai Haɓakawa Mai Haɓakawa (RNG)
- Amintaccen Taimakon Taya:
- Cikakken ingantaccen lambar lambar ECDSA, na zaɓi/sa hannun da aka adana na zaɓi
- Maɓallin maɓallin sadarwa na zaɓi kafin amintaccen taya
- Rufewa/Tabbataccen saƙon don hana harin kan jirgi
- I/O
- 14 x Dijital Pin
- 8x Analog Pin
- Micro USB
- Taimakon UART, SPI, I2C
- Ƙarfi
- Buck step-down Converter
- Bayanin Tsaro
- Darasi A
Hukumar
Aikace-aikace Examples
- Ana iya daidaita Haɗin Arduino® Nano RP2040 zuwa nau'ikan amfani da yawa godiya ga microprocessor mai ƙarfi, kewayon firikwensin kan jirgi da nau'in nau'in Nano. Aikace-aikace masu yiwuwa sun haɗa da:
- Ƙwararren Ƙwararren ƘwaƙwalwaYi amfani da microprocessor mai sauri da girma na RAM don gudanar da TinyML don gano ɓarna, gano tari, nazarin motsi, da ƙari.
- Na'urori masu sawa: Ƙananan ƙafar ƙafar Nano yana ba da damar samar da ilmantarwa na na'ura zuwa nau'in na'urorin da za a iya amfani da su ciki har da masu sa ido na wasanni da masu kula da VR.
- Mataimakin murya: Haɗin Arduino® Nano RP2040 ya haɗa da makirufo mai madaidaici wanda zai iya aiki azaman mataimaki na dijital kuma yana ba da damar sarrafa murya don ayyukanku.
Na'urorin haɗi
- Micro kebul na USB
- 15-pin 2.54mm masu kai na maza
- 15-pin 2.54mm masu kai tsaye stackable
Samfura masu dangantaka
- Girman nauyiGarkuwar Nano I/O
Mahimman ƙima
Sharuɗɗan Aiki da aka Shawarar
| Alama | Bayani | Min | Buga | Max | Naúrar |
| VIN | Shigar da kunditage daga VIN pad | 4 | 5 | 20 | V |
| VUSB | Shigar da kunditage daga kebul na USB | 4.75 | 5 | 5.25 | V |
| V3V3 | 3.3V fitarwa zuwa aikace-aikacen mai amfani | 3.25 | 3.3 | 3.35 | V |
| Farashin 3V3 | 3.3V fitarwa na yanzu (ciki har da kan jirgin IC) | – | – | 800 | mA |
| VIH | Shigar da babban matakin voltage | 2.31 | – | 3.3 | V |
| VIL | Shigar da ƙaramin matakin voltage | 0 | – | 0.99 | V |
| Babban darajar IOH | Yanzu a VDD-0.4 V, an saita fitarwa mai girma | 8 | mA | ||
| IOL Max | A halin yanzu a VSS+0.4 V, an saita fitarwa ƙasa ƙasa | 8 | mA | ||
| VOH | Fitarwa high voltage, 8m a | 2.7 | – | 3.3 | V |
| VOL | Fitarwa low voltage, 8m a | 0 | – | 0.4 | V |
| TOP | Yanayin Aiki | -20 | – | 80 | °C |
Amfanin Wuta
| Alama | Bayani | Min | Buga | Max | Naúrar |
| PBL | Amfanin wuta tare da madauki mai aiki | TBC | mW | ||
| PLP | Yin amfani da wutar lantarki a cikin ƙarancin wutar lantarki | TBC | mW | ||
| PMAX | Matsakaicin Amfani da Wuta | TBC | mW |
Aiki Ya Ƙareview
Tsarin zane
Cibiyar Topology
Gaba View
| Ref. | Bayani | Ref. | Bayani |
| U1 | Rasberi Pi RP2040 Microcontroller | U2 | Ublox NINA-W102-00B Wi-Fi/Bluetooth® Module |
| U3 | N/A | U4 | ATECC608A-MAHDA-T Crypto IC |
| U5 | AT25SF128A-MHB-T 16MB Flash IC | U6 | MP2322GQH Mai Rarraba Matakan Mataki-Down |
| U7 | Saukewa: DSC6111HI2B-012.0000 | U8 | MP34DT06JTR MEMS Omnidirectional Microphone IC |
| U9 | LSM6DSOXTR 6-axis IMU tare da Core Learning Machine | J1 | Male Micro USB Connector |
| Farashin DL1 | Green Power Akan LED | Farashin DL2 | Wurin lantarki na LED |
| Farashin DL3 | RGB Common Anode LED | Saukewa: PB1 | Maballin Sake saitin |
| JP2 | Analog Pin + D13 Fil | JP3 | Dijital fil |
Baya View
| Ref. | Bayani | Ref. | Bayani |
| SJ4 | 3.3V jumper (haɗe) | SJ1 | VUSB jumper (an cire haɗin) |
Mai sarrafawa
- Mai sarrafa na'ura ya dogara ne akan sabon Rasberi Pi RP2040 silicon (U1). Wannan microcontroller yana ba da dama don haɓaka Intanet na Abubuwa (IoT) mai ƙarancin ƙarfi da koyan inji. Arm® Cortex®-M0+ mai ma'ana guda biyu waɗanda aka rufe a 133MHz suna ba da ikon ƙididdigewa don koyan injin da aka haɗa da sarrafa layi ɗaya tare da ƙarancin wutar lantarki. An samar da bankuna masu zaman kansu guda shida na 264 KB SRAM da 2MB. Samun damar žwažwalwar ajiya kai tsaye yana ba da haɗin kai cikin sauri tsakanin na'urori da ƙwaƙwalwar ajiya waɗanda za'a iya sanya su baya aiki tare da ainihin don shigar da yanayin barci. Serial waya debug (SWD) yana samuwa daga taya ta pads karkashin allon. RP2040 yana gudana a 3.3V kuma yana da volal na cikitage regulator samar 1.1V.
- RP2040 tana sarrafa abubuwan gefe da na dijital, da kuma fil ɗin analog (A0-A3). Ana amfani da haɗin I2C akan fil A4 (SDA) da A5 (SCL) don haɗawa da abubuwan da ke kan jirgin kuma ana ja da su tare da resistor 4.7 kΩ. Layin Clock na SWD (SWCLK) da sake saiti kuma ana ciro su tare da resistor 4.7 kΩ. Wani oscillator MEMS na waje (U7) yana gudana a 12MHz yana ba da bugun bugun jini. IO mai shirye-shirye yana taimakawa wajen aiwatar da ka'idar sadarwa ta sabani tare da ƙaramin nauyi akan manyan abubuwan sarrafawa. Ana aiwatar da ƙirar na'urar USB 1.1 akan RP2040 don loda lambar.
Haɗin Wi-Fi/Bluetooth®
Ana samar da haɗin Wi-Fi da haɗin Bluetooth® ta tsarin Nina W102 (U2). RP2040 kawai yana da fil ɗin analog guda 4 kawai, kuma ana amfani da Nina don ƙaddamar da hakan zuwa cikakke takwas kamar yadda yake daidai a cikin nau'in nau'in Arduino Nano tare da wasu abubuwan analog na 4 12-bit (A4-A7). Bugu da ƙari, na kowa anode RGB LED kuma ana sarrafa shi ta hanyar Nina W-102 module kamar yadda LED ɗin ke kashe lokacin da yanayin dijital ya kasance KYAU kuma yana kunne lokacin da yanayin dijital ya yi ƙasa. Eriyar PCB ta ciki a cikin tsarin tana kawar da buƙatar eriya ta waje. Tsarin Nina W102 kuma ya haɗa da dual core Xtensa LX6 CPU wanda kuma za'a iya tsara shi ba tare da RP2040 ba ta pads ɗin da ke ƙarƙashin allo ta amfani da SWD.
6-axis IMU
Yana yiwuwa a sami gyroscope na 3D da bayanan accelerometer na 3D daga LSM6DSOX 6-axis IMU (U9). Baya ga samar da irin waɗannan bayanan, ana kuma iya yin koyan na'ura akan IMU don gano motsin motsi.
Ƙwaƙwalwar Ƙwaƙwalwar Waje
RP2040 (U1) yana da damar zuwa ƙarin 16 MB na ƙwaƙwalwar walƙiya ta hanyar haɗin QSPI. Siffar aiwatar da aiwatarwa (XIP) na RP2040 tana ba da damar ƙwaƙwalwar filasha ta waje don magancewa da samun dama ga tsarin kamar ƙwaƙwalwar ciki ce, ba tare da fara kwafin lambar zuwa ƙwaƙwalwar ajiyar ciki ba.
Rubutun Rubutu
ATECC608A Cryptographic IC (U4) yana ba da amintattun damar taya tare da SHA da AES-128 boye-boye/goyan bayan ɓoyewa don tsaro a cikin Smart Home da aikace-aikacen masana'antu IoT (IIoT). Bugu da ƙari, ana kuma samun janareta na lambar bazuwar don amfani da RP2040.
Makirifo
An haɗa makirufo MP34DT06J ta hanyar haɗin PDM zuwa RP2040. Makirifo na dijital MEMS shine jagorar ko'ina kuma yana aiki ta hanyar sigina mai ƙarfi tare da sigina mai girma (64 dB) zuwa rabon amo. An kera nau'in ji, mai iya gano raƙuman sauti, ta amfani da tsarin micromachining na musamman na silicon wanda aka keɓe don samar da firikwensin sauti.
LED RGB
RGB LED (DL3) LED anode ne gama gari wanda ke da alaƙa da ƙirar Nina W102. LED ɗin yana kashe lokacin da yanayin dijital yayi KYAU kuma yana kunne lokacin da yanayin dijital yayi ƙasa.
Itace Power
Ana iya kunna Haɗin Arduino Nano RP2040 ta ko dai Micro USB tashar (J1) ko kuma ta hanyar VIN akan JP2. Mai jujjuya buck ɗin kan jirgi yana ba da 3V3 zuwa microcontroller RP2040 da duk sauran abubuwan haɗin gwiwa. Bugu da ƙari, RP2040 kuma yana da mai sarrafa 1V8 na ciki.
Aikin hukumar
Farawa - IDE
Idan kana son tsara Haɗin Arduino® Nano RP2040 naka yayin layi, kana buƙatar shigar da IDE Desktop na Arduino® [1] Don haɗa sarrafa Arduino® Edge zuwa kwamfutarka, kuna buƙatar kebul na USB micro. Wannan kuma yana ba da wutar lantarki ga allon, kamar yadda LED ya nuna.
Farawa - Arduino Web Edita
Duk allunan Arduino®, gami da wannan, suna aiki a waje akan Arduino® Web Edita [2], ta hanyar shigar da plugin mai sauƙi kawai.
Arduino® Web Ana gudanar da edita akan layi, saboda haka koyaushe zai kasance na zamani tare da sabbin abubuwa da goyan baya ga duk allunan. Bi [3] don fara codeing akan mashigin yanar gizo kuma loda zane-zanen ku akan allo.
Farawa - Arduino Cloud
Duk samfuran da aka kunna Arduino® IoT ana tallafawa akan Arduino® IoT Cloud wanda ke ba ku damar Shiga, tsarawa da tantance bayanan firikwensin, jawo abubuwan da suka faru, da sarrafa gidanku ko kasuwancin ku.
Sampda Sketches
SampZa a iya samun zane-zane na Arduino® Nano RP2040 Connect ko dai a cikin “Ex.amples” menu a cikin Arduino® IDE ko a cikin sashin “Takardu” na Arduino webshafin [4]
Albarkatun Kan layi
Yanzu da kuka wuce ta hanyar abubuwan da za ku iya yi tare da hukumar za ku iya gano abubuwan da ba su da iyaka da ke bayarwa ta hanyar duba ayyuka masu ban sha'awa akan ProjectHub [5], da Arduino® Library Reference [6] da kuma kantin sayar da kan layi [7] inda za ku iya haɗa allonku da na'urori masu auna firikwensin, masu kunnawa da ƙari.
Farfadowar allo
Duk allunan Arduino suna da ginanniyar bootloader wanda ke ba da damar walƙiya allon ta USB. Idan zane ya kulle na'ura mai sarrafawa kuma allon ba zai iya zuwa ta hanyar USB ba, yana yiwuwa a shigar da yanayin bootloader ta danna maɓallin sake saiti sau biyu bayan kunna wuta.
Mai haɗa Pinouts
J1 Micro USB
| Pin | Aiki | Nau'in | Bayani |
| 1 | V-BUS | Ƙarfi | 5V USB Power |
| 2 | D- | Daban-daban | USB daban-daban data - |
| 3 | D+ | Daban-daban | USB daban-daban data + |
| 4 | ID | Dijital | Ba a yi amfani da shi ba |
| 5 | GND | Ƙarfi | Kasa |
JP1
| Pin | Aiki | Nau'in | Bayani |
| 1 | TX1 | Dijital | UART TX / Digital Pin 1 |
| 2 | RX0 | Dijital | UART RX / Digital Pin 0 |
| 3 | RST | Dijital | Sake saiti |
| 4 | GND | Ƙarfi | Kasa |
| 5 | D2 | Dijital | Dijital Pin 2 |
| 6 | D3 | Dijital | Dijital Pin 3 |
| 7 | D4 | Dijital | Dijital Pin 4 |
| 8 | D5 | Dijital | Dijital Pin 5 |
| 9 | D6 | Dijital | Dijital Pin 6 |
| 10 | D7 | Dijital | Dijital Pin 7 |
| 11 | D8 | Dijital | Dijital Pin 8 |
| 12 | D9 | Dijital | Dijital Pin 9 |
| 13 | D10 | Dijital | Dijital Pin 10 |
| 14 | D11 | Dijital | Dijital Pin 11 |
| 15 | D12 | Dijital | Dijital Pin 12 |
JP2
| Pin | Aiki | Nau'in | Bayani |
| 1 | D13 | Dijital | Dijital Pin 13 |
| 2 | 3.3V | Ƙarfi | 3.3V Power |
| 3 | REF | Analog | NC |
| 4 | A0 | Analog | Analog Pin 0 |
| 5 | A1 | Analog | Analog Pin 1 |
| 6 | A2 | Analog | Analog Pin 2 |
| 7 | A3 | Analog | Analog Pin 3 |
| 8 | A4 | Analog | Analog Pin 4 |
| 9 | A5 | Analog | Analog Pin 5 |
| 10 | A6 | Analog | Analog Pin 6 |
| 11 | A7 | Analog | Analog Pin 7 |
| 12 | VUSB | Ƙarfi | Input na USB Voltage |
| 13 | REC | Dijital | BOOTSEL |
| 14 | GND | Ƙarfi | Kasa |
| 15 | VIN | Ƙarfi | Voltage Shigarwa |
Lura: The analog reference voltage yana daidaitawa a +3.3V. An haɗa A0-A3 zuwa RP2040's ADC. An haɗa A4-A7 zuwa Nina W102 ADC. Bugu da ƙari, ana raba A4 da A5 tare da bas ɗin I2C na RP2040 kuma kowannensu an ja shi da 4.7 KΩ resistors.
Saukewa: RP2040
| Pin | Aiki | Nau'in | Bayani |
| 1 | SWDIO | Dijital | SWD Data Line |
| 2 | GND | Dijital | Kasa |
| 3 | SWCLK | Dijital | Agogon SWD |
| 4 | +3V3 | Dijital | + 3V3 Wutar Lantarki |
| 5 | TP_RESETN | Dijital | Sake saiti |
Nina W102 SWD Pad
| Pin | Aiki | Nau'in | Bayani |
| 1 | TP_RST | Dijital | Sake saiti |
| 2 | TP_RX | Dijital | Serial Rx |
| 3 | TP_TX | Dijital | Serial Tx |
| 4 | TP_GPIO0 | Dijital | Farashin GPIO0 |
Bayanin Injiniya
Takaddun shaida
Sanarwa na Daidaitawa CE DoC (EU)
Muna ayyana ƙarƙashin alhakin mu kaɗai cewa samfuran da ke sama sun dace da mahimman buƙatun ƙa'idodin EU masu zuwa don haka sun cancanci tafiya cikin 'yanci a cikin kasuwannin da suka ƙunshi Tarayyar Turai (EU) da Yankin Tattalin Arziki na Turai (EEA).
Sanarwa na Daidaitawa ga EU RoHS & ISAUTAR 211 01/19/2021
Allolin Arduino suna bin umarnin RoHS 2 2011/65/EU na Majalisar Tarayyar Turai da RoHS 3 Directive 2015/863/EU na Majalisar 4 ga Yuni 2015 kan ƙuntata amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da lantarki.
| Abu | Matsakaicin iyaka (ppm) |
| Kai (Pb) | 1000 |
| Cadmium (Cd) | 100 |
| Mercury (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis (2-Ethylhexyl) phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Keɓancewa: Ba a da'awar keɓancewa.
Al'amuran Arduino sun cika cikakkun buƙatun na Dokokin Tarayyar Turai (EC) 1907/2006 dangane da Rijista, Ƙimar, Izini da Ƙuntata Sinadarai (SAUKI). Ba mu bayyana ko ɗaya daga cikin SVHCs ba (https://echa.europa.eu/)web/bako/Jerin-jerin-takara), Jerin Abubuwan Abubuwan da ke Damu da Babban Damuwa don izini a halin yanzu da ECHA ta fitar, yana nan a cikin duk samfuran (da kuma kunshin) a cikin adadi mai yawa a cikin maida hankali daidai ko sama da 0.1%. A iyakar saninmu, muna kuma bayyana cewa samfuranmu ba su ƙunshi kowane nau'in abubuwan da aka jera akan "Jerin Izini" (Annex XIV na ƙa'idodin REACH) da Abubuwan da ke da matukar damuwa (SVHC) a cikin kowane adadi mai mahimmanci kamar yadda aka ƙayyade. ta Annex XVII na jerin 'yan takara da ECHA (Hukumar Sinadarai ta Turai) ta buga 1907/2006/EC.
FCC
Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba
- dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so.
FCC RF Bayanin Bayyana Radiation:
- Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.
- Wannan kayan aikin ya dace da iyakokin fiddawa na RF wanda aka tsara don muhalli mara sarrafawa.
- Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 20cm tsakanin radiyo & jikin ku.
Littattafan mai amfani don na'urar rediyon da ba ta da lasisi za ta ƙunshi sanarwa mai zuwa ko makamancinta a cikin wani wuri na musamman a cikin littafin jagorar mai amfani ko kan na'urar ko duka biyun. Wannan na'urar ta dace da ma'auni(s) na RSS na masana'antar Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- wannan na'urar bazai haifar da tsangwama ba
- dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.
Ta haka, Arduino Srl ya bayyana cewa wannan samfurin ya dace da mahimman buƙatu da sauran tanadin da suka dace na Directive 2014/53/EU. An ba da izinin amfani da wannan samfurin a duk ƙasashe membobin EU. Ta haka, Arduino Srl ya bayyana cewa wannan samfurin ya dace da mahimman buƙatu da sauran tanadin da suka dace na Directive 2014/53/EU. An ba da izinin amfani da wannan samfurin a duk ƙasashe membobin EU.
| Makadan mitar | Matsakaicin Ingancin Isotropic Radiated Power (EIRP) |
| TBC | TBC |
Bayanin Kamfanin
| Sunan kamfani | Arduino Srl |
| Adireshin Kamfanin | Ta hanyar Andrea Appiani, 2520900 MONZA |
Takardun Magana
| Ref | mahada |
| Arduino IDE (Desktop) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (Cloud) | https://create.arduino.cc/editor |
| Cloud IDE Ana Farawa | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino- webEdita-4b3e4a |
| Arduino Website | https://www.arduino.cc/ |
| Cibiyar Aikin | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| PDM (microphone) Library | https://www.arduino.cc/en/Reference/PDM |
| WiFiNINA (Wi-Fi, W102)
Laburare |
https://www.arduino.cc/en/Reference/WiFiNINA |
| ArduinoBLE (Bluetooth®, W-102) Laburare | https://www.arduino.cc/en/Reference/ArduinoBLE |
| IMU Library | https://reference.arduino.cc/reference/en/libraries/arduino_lsm6ds3/ |
| Shagon Kan layi | https://store.arduino.cc/ |
Tarihin Bita
| Kwanan wata | Bita | Canje-canje |
| 12/07/2022 | 3 | Gabaɗaya sabuntawa |
| 02/12/2021 | 2 | Canje-canjen da ake nema don takaddun shaida |
| 14/05/2020 | 1 | Sakin Farko |
Arduino® Nano RP2040 Haɗa
An gyara: 16/02/2024
Takardu / Albarkatu
 |
Arduino Nano RP2040 Haɗa Tare da Masu kai [pdf] Jagoran Jagora ABX00053, Nano RP2040 Haɗa tare da masu kai, Nano RP2040, Haɗa tare da masu kai, masu kai. |