DSP4X6 Digital Signal Processor

Cov neeg siv
Phau ntawv
DSP4X6
Digital Signal Processor

Cov lus qhia kev nyab xeeb

Thaum siv cov khoom siv hluav taws xob no, kev ceev faj yooj yim
yuav tsum tau noj ib txwm, nrog rau cov hauv qab no:

1. Nyeem tag nrho cov lus qhia ua ntej siv cov khoom.
2. Tsis txhob siv cov khoom no nyob ze dej (piv txwv li, ze ntawm lub dab da dej, lub tais ntxhua khaub ncaws, chav ua noj, hauv a
   hauv qab daus ntub los yog ze ntawm lub pas dej da dej thiab lwm yam). Kev saib xyuas yuav tsum tau ua kom cov khoom tsis ua
   poob rau hauv cov kua thiab cov kua dej yuav tsis nchuav rau ntawm lub cuab yeej.
3. Siv cov cuab yeej no thaum koj paub tseeb tias nws muaj lub hauv paus ruaj khov thiab nws raug kho kom ruaj ntseg.
4. Cov khoom no tej zaum yuav muaj peev xwm ua kom muaj suab nrov uas tuaj yeem ua rau mus tas li
   tsis hnov ​​lus. Tsis txhob ua haujlwm rau lub sijhawm ntev ntawm qhov ntim siab lossis ntawm a
   qib uas tsis xis nyob. Yog tias koj hnov ​​​​qhov tsis hnov ​​​​lus lossis suab nrov hauv pob ntseg,
   Koj yuav tsum sab laj nrog otorhinolaryngologist.
5. Cov khoom yuav tsum nyob deb ntawm qhov chaw kub xws li radiators, cua sov vents,
   los yog lwm yam khoom siv ua kom sov.
6. Nco tseg rau kev sib txuas fais fab: rau cov khoom siv pluggable, lub qhov (socket-outlet) yuav tsum yog
   ntsia ze ntawm cov khoom siv thiab yuav tsum tau yooj yim nkag mus.
7. Cov khoom siv hluav taws xob yuav tsum tsis muaj kev puas tsuaj thiab tsis txhob sib koom lub qhov hluav taws xob lossis txuas ntxiv
   qaum nrog lwm yam khoom siv. Tsis txhob tso cov cuab yeej ntsaws rau hauv lub qhov hluav taws xob thaum nws tsis yog
   tau siv rau lub sijhawm ntev.
8. Fais fab tuag: thaum lub hwj chim txuas nrog rau daim phiaj fais fab
   txuas nrog lub tshuab, lub zog standby yog ON. Thaum lub zog hloov
   tig ON, lub ntsiab fais fab yog ON. Kev ua haujlwm nkaus xwb los disconnect tus
   fais fab mov los ntawm daim phiaj, unplug lub hwj chim qaum.
9. Kev Tiv Thaiv Kev Tiv Thaiv - Ib qho cuab yeej siv nrog chav kawm I kev tsim kho yuav tsum txuas nrog
   ib lub qhov hluav taws xob qhov hluav taws xob nrog kev tiv thaiv kev sib txuas hauv av.
   Kev Tiv Thaiv Earthing - Ib qho cuab yeej siv nrog chav kawm I kev tsim kho yuav tsum txuas nrog a
   mains qhov hluav taws xob qhov hluav taws xob nrog kev tiv thaiv earthing txuas.
10. Lub teeb nyem nrog lub cim xub thawj, nrog rau daim duab peb sab sib npaug,
    yog npaj los ceeb toom rau tus neeg siv kom pom muaj qhov tsis muaj kev phom sij
    voltage' nyob rau hauv cov khoom enclosure uas tej zaum yuav txaus
    qhov loj los ua ib qho kev pheej hmoo ntawm hluav taws xob poob rau tib neeg.
11. Lub exclamation cim nyob rau hauv ib tug equilateral daim duab peb sab yog npaj los ceeb toom rau
    tus neeg siv kom muaj qhov tseem ceeb ntawm kev khiav hauj lwm thiab kev saib xyuas (kev pabcuam)
    cov lus qhia hauv cov ntaub ntawv nrog rau cov khoom siv.
12. Muaj qee qhov chaw uas muaj voltage sab hauv, kom txo tau qhov kev pheej hmoo ntawm hluav taws xob poob siab
    tsis txhob tshem tawm lub hau ntawm lub cuab yeej lossis lub hwj chim.
    Lub npog yuav tsum raug tshem tawm los ntawm cov neeg ua haujlwm tsim nyog nkaus xwb.
13. Cov khoom yuav tsum tau muab kev pabcuam los ntawm cov neeg ua haujlwm pabcuam yog tias:
    - Lub hwj chim lossis lub ntsaws ntsaws tau raug puas lawm.
    - Cov khoom tau poob rau hauv lossis cov kua tau nchuav rau ntawm cov khoom.
    - Cov khoom tau raug los nag.
    - Cov khoom tau poob los yog lub qhov rooj puas lawm.

Ua ntej koj pib

DSP4X6 - 4 inputs thiab 6 outputs digital signal processor rau kab theem suab teeb liab ua thiab
txoj kev. Intuitive lag luam software muab kev nkag siab yooj yim rau kev ua, thiab
nta lub Hoobkas presets rau lub tshuab suab uas muaj AMC RF series cov kws tshaj lij.
Device zoo kawg nkaus haum me me suab nruab rau kev sib xyaw thiab kev ua suab, cais zaus rau
ob-txoj kev suab tshuab, kho lub sij hawm, ntxiv suab nrov rooj vag, teem EQ los yog ntxiv suab limiter.

NTA

• Digital signal processor 4 x 6
• Balanced inputs thiab outputs
• 24 ntsis AD/DA converters
• 48 kHz ibampling nqi
• Rooj vag, EQ, crossover, ncua, limiter
• Hom-B USB chaw nres nkoj txuas rau PC
• 10 preset nco
• Ntaus booting preset

Kev ua haujlwm

Pem hauv ntej & nram qab vaj huam sib luag muaj nuj nqi

LED KEV LAG LUAM
LED qhov taw qhia illuminates thaum ntaus ntawv ON. Hloov ntaus ntawv ON lossis OFF
nrog lub hwj chim hloov ntawm lub vaj huam sib luag rov qab.

USB HOM-B CABLE SOCKET
Txuas koj ntaus ntawv nrog PC siv hom-B USB cable.

INPUT & OUTput CONNECTORS
Balanced Phoenix connectors rau suab teeb liab inputs thiab outputs.
Siv cov kab hluav taws xob sib npaug.

MAINS POWER CONNECTOR

Txuas lub cuab yeej rau lub zog hluav taws xob siv hluav taws xob uas tau muab rau cable.

Software interface

Txuas rau ntaus ntawv & navigating windows

SOFTWARE DOWNLOAD
Mus saib www.amcpro.eu software & cov ntaub ntawv seem kom rub tawm qhov tseeb
software rau koj ntaus ntawv.

SYSTEM YUAV TSUM
Lub software ua haujlwm nrog Windows XP / WIN7 / WIN8 / WIN10 x64 lossis x32
operating system, thiab tuaj yeem khiav ncaj qha los ntawm PC yam tsis muaj kev teeb tsa.

THOV KEV KHO MOB
Txuas ntaus ntawv mus rau PC siv USB hom-B cable. Khiav lub DSP46 software ntawm lub
lub computer. Cov cuab yeej yuav cia li txuas mus rau lub computer tsis pub dhau 3-5
vib nas this. Lub ntsuab "txuas" qhov taw qhia (1) yuav tshwm nyob rau sab saum toj ntawm lub
lub qhov rais qhia txog kev sib txuas tsis tu ncua.

XOV XWM HAIV NEEG
Lub software muaj plaub lub ntsiab tab rau lub suab thiab ntaus ntawv teeb tsa. Nyem rau ntawm qhov
tabs “Audio Setting” (2), X-dhau (3), Router (4) lossis “System Setting” (5) hloov
qhov rai.

NAVIGATING SETTINGS
Nyem rau ntawm qhov parameter nkag mus rau nws qhov chaw teeb tsa. Qhov kev xaiv parameter yuav
yuav highlited nrog txawv xim.

Tus neeg siv interface ua raws cov teeb liab thaj pib nrog kev teeb tsa rau txhua qhov ntawm 4
inputs, visually displayed input/output matrix (hu ua Router) thiab tiav nrog 6
outputs thiab lawv cov kev mob siab rau.

Software interface

Suab Settings

LUB ROOJ (6)
Teem theem pib, nres thiab
tso lub sij hawm rau channel input suab nrov rooj vag.

TXOJ CAI (7)
Teem lub teeb liab input nce siv lub slider,
lossis los ntawm kev nkag mus rau tus nqi tshwj xeeb hauv dB.
Ntawm no lub channel yuav muted los yog
theem-inverted.

PEQ (8)

Cov tswv yim channel muaj cais 10-band equalizers. Txhua pawg tuaj yeem teem caij ua
raws li parametric (PEQ), qis lossis siab txee (LSLV / HSLV).

Nyem thiab tuav sab laug ntawm lub voj voog siab nrog tus lej EQ
thiab luag nws los teeb tsa qhov zaus thiab nce. Txhua qhov parameter kuj tuaj yeem tsim los ntawm
nkag mus rau cov nqi tshwj xeeb hauv daim duab. Txhua pawg tuaj yeem hla tus kheej.

BYPASS khawm mutes thiab unmute tag nrho EQ bands ib zaug.
RESET khawm rov qab tag nrho EQ nqis rau qhov tseem ceeb.
COPY/PASTE nyees khawm tso cai luam EQ nqis los ntawm ib qho kev nkag mus rau
lwm.

Nco tseg: nws tsis tuaj yeem luam EQ nqis los ntawm cov khoom nkag mus rau cov zis.

Software interface

Suab Settings

QHOV CHAW UA HAUJ LWM (9)
Teem ncua sij hawm rau txhua lub tswv yim channel. ncua
ntau yam yog 0.021-20 ms., tus nqi kuj yog
nkag mus rau hauv milliseconds, hauv centimeters
los yog ntiv tes.

AUDIO ROUTER (4 & 10)
DSP4X6 muab hloov tau yooj yim input-output matrix rau teeb liab routing. Txhua lub tswv yim
channel tuaj yeem raug xa mus rau txhua qhov tso tawm, thiab txhua qhov tso tawm channel tuaj yeem sib xyaw
ntau inputs. Nco tseg: los ntawm lub neej ntawd teeb tsa DSP4X6 inputs yog routed raws li nyob rau hauv
daim duab hauv qab no.

CROSSOVER (11)

DSP4X6 tuaj yeem ua haujlwm raws li kev sib tw, nrog kev sib cais rau txhua qhov tso zis.
Teem lub high-pass thiab low-pass lim rau txhua qhov tso zis los ntawm kev nkag mus rau lim
zaus, xaiv roll-off nkhaus puab thiab siv los ntawm daim ntawv.

TXOJ CAI TSHIAB (13)
Teem ncua sij hawm rau txhua qhov tso zis tawm channel. ncua
ntau yam yog 0.021-20 ms., tus nqi kuj yog
nkag mus rau hauv milliseconds, hauv centimeters
los yog ntiv tes.

Software interface

Suab Settings
TXOJ CAI TSHIAB (12)

Output channels muaj cais 10-band equalizers. Txhua pawg tuaj yeem teem caij ua
raws li parametric (PEQ), qis lossis siab txee (LSLV / HSLV). Crossover settings kuj tseem
tso tawm kom pom thiab tuaj yeem hloov pauv hauv qhov rai no.

Nyem thiab tuav sab laug ntawm lub voj voog siab nrog tus lej EQ
thiab luag nws los teeb tsa qhov zaus thiab nce. Txhua qhov parameter kuj tuaj yeem tsim los ntawm
nkag mus rau cov nqi tshwj xeeb hauv daim duab. Txhua pawg tuaj yeem hla tus kheej.

BYPASS khawm mutes thiab unmute tag nrho EQ bands ib zaug.
RESET khawm rov qab tag nrho EQ nqis rau qhov tseem ceeb.
COPY/PASTE nyees khawm tso cai luam EQ nqis los ntawm ib qho kev nkag mus rau
lwm. Nco tseg: nws tsis tuaj yeem luam EQ nqis los ntawm cov khoom tawm mus rau cov khoom siv.

TXOJ CAI (14)
Teem qhov nce ntxiv rau cov zis
channel siv tus slider, los yog nkag mus
tus nqi tshwj xeeb hauv dB. Ntawm no cov zis
channel yuav muted los yog theem-inverted.

TXOJ CAI (15)
Teem lub limiter rau txhua qhov tso zis tawm channel
nrog rau qhov pib fader los yog nkag mus
tus lej tshwj xeeb ir dB. Limiter tso tawm
Lub sijhawm muaj ntau yam ntawm 9-8686 ms.

Qhov System Settings
HARDWARE MEMORY

DSP4X6 tuaj yeem txuag tau 9 tus neeg siv cov presets hauv lub cim xeeb sab hauv.
Nyem lub pob preset nyob rau hauv seem "Txuag" kom nkag mus rau lub npe tshiab preset thiab txuag
tsis muaj.
Nyem lub pob preset nyob rau hauv seem "Load" kom rov qab tau txais kev cawmdim

PARAMETERS: EXPORTING & Ntshuam
Cov khoom siv tam sim no tuaj yeem raug xa tawm raws li a file rau PC rau yav tom ntej siv los yog rau
yooj yim configuration ntawm ntau yam DSP4X6 li.
Nyem "Export" khawm nyob rau hauv "Parameters" kem export a file, nyem "Ntshuam"
kom thauj khoom file los ntawm PC.

Factory: EXPORTING & Ntshuam
Tag nrho cov cuab yeej presets tuaj yeem raug xa tawm ua ib zaug file rau PC rau yav tom ntej siv los yog yooj yim
configuration ntawm ntau yam DSP4X6 li.
Nyem "Export" khawm nyob rau hauv lub "Factory" kem export a file, nyem "Ntshuam" rau
thauj file los ntawm PC.

Device BOOT PRESET
Txhawm rau xaiv khau raj preset, xaiv preset los ntawm daim ntawv teev npe. Ntaus yuav thauj khoom
xaiv preset txhua zaus nws powers rau.
Xaiv "Xaiv qhov chaw" los ntawm cov npe preset rau khau raj hauv lub xeev nws yog thaum twg
fais fab tuag.

Software interface

PRESETS RAU AMC RF Professional LOUDSPEAKERS
Los ntawm lub neej ntawd DSP4X6 los nrog presets presets rau ntau yam teeb tsa rau
AMC RF series kws tshaj lij.

Presets kho PEQ thiab crossover chaw rau AMC nrov RF 10, RF 6,
thiab ib lub subwoofer RFS 12. Ib qho "Flat" preset muaj PEQ kho kom tiaj tus.
Lub suab nrov zaus nkhaus, thaum lub "Boost" preset muaj qhov nqa hauv qhov tsawg
ntau. Tag nrho cov presets yog rau kev teeb tsa lub tso suab thiab muaj cov lus tso tawm hauv qab no
configurations:

General Specifications

DSP4X6 Digital Signal Processor

Technical Specifications DSP4X6
Fais fab mov ~ 220-230 V, 50 Hz
Kev siv hluav taws xob 11 W
Input / output connector Balanced Phoenix
Tawm tswv yim impedance 4,7 kΩ
Kev nkag siab siab tshaj plaws +8 dBu
Cov zis impedance 100Ω
Cov zis siab tshaj plaws qib + 10 dBu
Qhov siab tshaj plaws nce -28 dBu
Zaus teb 20 Hz - 20 kHz
Distortion <0.01% (0dBu/1kHz)
Dynamic ntau 100 dBu
SampLub suab zaus 48 kHz
AD/DA converter 24 ntsis
Txhawb OS Windows
Dimensions (H x W x D) 213 x 225 x 44 mm
Nyhav 1,38 kg

Cov ntaub ntawv / Cov ntaub ntawv

AMC DSP4X6 Digital Signal Processor [ua pdf] Tus neeg siv phau ntawv DSP4X6, DSP4X6 Digital Signal Processor, Digital Signal Processor, Signal Processor, Processor

Cov ntaub ntawv

• Cov neeg siv phau ntawv