HDWR Global HD77 Code Reader
Product Usage Instructions
Bluetooth Mode:
In Bluetooth mode, ensure the reader is paired with the target device. Follow the device’s instructions to establish a connection.
2.4G Mode:
For 2.4G mode, connect the included cable to the reader and the target device. Make sure the cable connections are secure.
Factory Setting:
To reset to factory settings, follow the specific instructions provided in the manual.
Data Transfer:
To transfer data, use the designated data transfer method outlined in the manual.
Shut Down:
To shut down the reader for different durations, follow the corresponding shutdown procedures as indicated in the manual.
Sound Settings:
Adjust the sound settings by selecting between low tone, mid-tone, and high-pitched sound options.
USB Modes:
Select between USB-HID and USB-VIRTUAL COM modes based on your connectivity requirements.
Turning Off the Reader:
To turn off the reader, follow the recommended steps provided in the manual to ensure proper shutdown.
Specifications:
- Warranty: 2 years
- Light Source: 650 -/+ 20 nm
- Processor: 32-bit ARM
- Scan Type: Bidirectional
- Scanning method: manual (push-button)
- Scan Acknowledgement: Light and Sound Signal
- Scanning speed: 300 scans per second
- Scanning width: 30 cm
- Print Contrast: Min 25%
- Error rate: 1/20 million
- Code memory: 100,000 codes
- Communication: Bluetooth, 2.4 GHz
- Wireless range: Bluetooth up to 10 m, radio up to 100 m
- Radio frequency: 2.4 GHz
- Button Life: 8,000,000 Times
- Laser Lifetime: 12000 hours
- Charging: via USB cable
- Charging Power Supply: 5V-400mA
- Working Current: 3.5Vx40mA
- Standby Current: 18A-5mA
- Working Time: 3 – 10 days
- Interface: USB
- Ingress protection: IP54
- Drop resistance: up to 2 m
- Device dimensions: 17 x 9 x 6.5 cm
- Package dimensions: 16.5 x 10 x 8 cm
- Device weight: 200 g
- Weight of the device with packaging: 260 g
- 1D Readable Codes: UPC, EAN, Code 128, Code 39, Code 39 Full ASCII, Coda bar, Industrial 2 of 5, Interleaved 2 of 5 (ITF), Code 93, MSI, Code 11, ISBN, ISSN, China post, GS1 Databar, Code 32
Set contents:
- Wireless barcode reader
- USB cable
- USB Receiver
- Card with control codes
- Manual
Features:
- Scan speed: up to 300 scans per second
- Internal memory capacity: up to 100,000 code reads
- Wireless communication type: Bluetooth, 2.4 GHz
- Wireless range: Bluetooth up to 10 m, radio up to 100 m
- Drop resistance: up to 2 meters
Control Codes – Reader Settings
FAQs
Q: How do I clear all data on the reader?
A: To clear all data, navigate to the appropriate menu option and follow the on-screen prompts to confirm data deletion.
Q: What is the default battery quantity display?
A: The default battery quantity display is shown on the main screen of the reader.
Documents / Resources
 |
HDWR Global HD77 Code Reader [pdf] User Manual HD77 Code Reader, HD77, Code Reader, Reader |