Contents
hide
HDWR Global HD-SL36 Code Reader
Product Information
Specifications
- Model: HD-SL36
- Interfaces: USB, Virtual COM
- Barcode Scanning Modes: Manual mode, Auto mode
- Beep Settings: Startup beep, Scan beep (High, Medium, Low volume)
- Light Signal Settings: On all the time, On during scanning, Off
Product Usage Instructions
Factory Settings
- The factory settings include case settings and barcode settings.
- To reset to factory settings, follow the instructions in the manual.
Case Settings
- Adjust the case settings to configure uppercase and lowercase letters as well as end characters like CR (Carriage Return) and LF (Line Feed).
Interface Settings
- Choose between USB HID and USB Virtual COM interfaces based on your requirements.
Barcode Scanning Modes
- Select between Manual mode for manual barcode scanning and Auto mode for automatic scanning.
Barcode Settings
- You can enable or disable specific barcodes, set prefixes and suffixes for scanned data.
Beep Settings
- Configure the beep settings, such as enabling or disabling beeps during startup and scanning. Adjust the volume level as needed.
Light Signal Settings
- Set the light signal behavior to be on all the time, on during scanning, or completely off.
Specifications
- Warranty: 2 years
- Material: ABS + PC
- Light Source: White and Red LED
- Sensor: CMOS
- Resolution: 640 x 480 px
- Scanning method: manual (on the button) / automatically (after bringing the code closer)
- Scan Acknowledgement: Light and Sound Signal
- Scan Speed: 30 fps/s
- Voltage: DC 5V
- Working Current: 230mA
- Standby Current: 150mA
- Drop resistance: 1.5 m
- Interface: USB, Virtual COM
- Cable length: 200 cm
- Device dimensions: 17.5 x 7.3 x 10.2 cm
- Package dimensions: 24 x 10 x 8 cm
- Device weight: 245 g
- Weight of the device with packaging: 320 g
- Operating temperature: -10° to 55°C
- Storage Temperature: -20° to 60°C
- Operating Humidity: 5 to 95%
- 1D Readable Codes: UPC-A, UPC-E, EAN-8, EAN-13, Code 39, Codabar, Code 128, Interleaved 2 of 5 (ITF), Matrix 2 of 5, Code 93, UCC/ EAN-128, Code 11, MSI, UK, Plessey, ISBN/ ISSN, GS1 Databar Expanded, GS1 Databar, GS1 Databar Limited
- Readable 2D codes: QR, PDF 417, Data Matrix, Aztec
Set contents
- Wired Multidimensional Code Reader
- USB cable
- Instruction manual in paper form in English.
Features
- Type of barcodes read: 1D and 2D barcodes, including QR and Aztec codes, from paper labels and phone screens
Scanning chip: equipped with a CMOS sensor - Drop resistance: up to 1.5 meters
- Available interfaces: USB, Virtual COM
Factory Setting
Case settings
Setting End Characters
Interface settings
Barcode scanning modes
Barcode settings
Setting Prefix and Suffix
Beep settings
Light signal settings
Frequently Asked Questions
- Q: How do I reset the device to factory settings?
- A: To reset to factory settings, navigate to the Factory Reset option in the menu and confirm the action.
- Q: How can I change the barcode scanning mode?
- A: You can switch between Manual mode and Auto mode in the Barcode Scanning Modes section of the settings menu.
Documents / Resources
 |
HDWR Global HD-SL36 Code Reader [pdf] User Manual HD-SL36 Code Reader, HD-SL36, Code Reader, Reader |
