FASAHA MASU SARKI EU-LX Mai Kula da Filayen Gishiri

Hotuna da zane-zane don dalilai ne kawai. Mai sana'anta yana da haƙƙin gabatar da wasu canje-canje.

TSIRA

Kafin amfani da na'urar a karon farko mai amfani yakamata ya karanta waɗannan ƙa'idodi a hankali. Rashin bin ƙa'idodin da aka haɗa a cikin wannan jagorar na iya haifar da rauni na mutum ko lalacewar mai sarrafawa. Ya kamata a adana littafin littafin mai amfani a wuri mai aminci don ƙarin tunani. Don kauce wa hatsarori da kurakurai, ya kamata a tabbatar da cewa kowane mutumin da ke amfani da na'urar ya fahimci ka'idar aiki da kuma ayyukan tsaro na mai sarrafawa. Idan za a sanya na'urar a wani wuri na daban, tabbatar cewa an adana littafin jagorar mai amfani tare da na'urar ta yadda kowane mai amfani ya sami damar samun mahimman bayanai game da na'urar. Mai sana'anta baya karɓar alhakin duk wani rauni ko lalacewa sakamakon sakaci; don haka, masu amfani dole ne su ɗauki matakan tsaro da suka dace da aka jera a cikin wannan littafin don kare rayukansu da dukiyoyinsu.

GARGADI 

• Babban ƙarartage! Tabbatar cewa an cire haɗin mai sarrafawa daga na'urorin sadarwa kafin yin duk wani aiki da ya shafi wutar lantarki (toshe igiyoyi, shigar da na'urar da dai sauransu).
• ƙwararren ma'aikacin lantarki ne ya sanya na'urar.
• Kafin fara mai sarrafawa, mai amfani ya kamata ya auna juriya na ƙasa na injinan lantarki da juriya na igiyoyi.
• Bai kamata yara su sarrafa mai sarrafa ba.

GARGADI 

• Ana iya lalata na'urar idan walƙiya ta faɗo. Tabbatar cewa filogi ya katse daga wutar lantarki yayin hadari.
• Duk wani amfani banda fayyace ta masana'anta haramun ne.
• Kafin da lokacin lokacin dumama, yakamata a bincika mai sarrafawa don yanayin igiyoyinsa. Hakanan ya kamata mai amfani ya bincika idan mai sarrafawa yana da kyau kuma ya tsaftace shi idan ƙura ko datti.

Canje-canje a cikin samfuran da aka bayyana a cikin jagorar ƙila an gabatar da su bayan kammalawarsa a ranar 14 ga Oktoba 2022. Mai ƙira yana riƙe da haƙƙin gabatar da canje-canje ga tsari ko launuka. Misalan na iya haɗawa da ƙarin kayan aiki. Fasahar bugawa na iya haifar da bambance-bambance a launuka da aka nuna. Kula da yanayin yanayi shine fifikonmu. Sanin gaskiyar cewa muna kera na'urorin lantarki yana wajabta mana zubar da abubuwan da aka yi amfani da su da kayan lantarki ta hanyar da ba ta da lafiya ga yanayi. Sakamakon haka, kamfanin ya sami lambar rajista wanda Babban Inspector na Kare Muhalli ya sanya. Alamar kwandon shara a kan samfur na nufin kada a jefar da samfurin zuwa kwandon shara. Ta hanyar ware sharar da aka yi niyya don sake amfani da su, muna taimakawa kare yanayin yanayi. Hakki ne na mai amfani don canja wurin sharar kayan lantarki da lantarki zuwa wurin da aka zaɓa don sake sarrafa sharar da aka samu daga kayan lantarki da lantarki.

BAYANI AKAN tsarin

Mai kula da WiFi na EU-LX wani ɓangare ne na tsarin kula da dumama / sanyaya wanda ke ba da damar faɗaɗa ikon sarrafawar shigarwar thermal da ke akwai ta hanyar ƙaddamar da tsarin zafi. Babban aikin shine kiyaye yanayin zafin da aka saita a kowane yanki. EU-LX WiFi na'ura ce wacce, tare da duk na'urori na gefe, kamar na'urori masu auna firikwensin daki, masu kula da daki, firikwensin bene, firikwensin waje, firikwensin taga, da masu kunna zafin jiki, suna samar da tsarin haɗin gwiwar gabaɗaya.

Godiya ga software mai yawa, EU-LX WiFi mai kulawa na iya yin ayyuka da yawa:

• goyan bayan EU-R-12b, EU-R-12s, EU-F-12b da EU-RX masu kula da kebul
• sarrafa masu sarrafa mara waya: EU-R-8X, EU-R-8b, EU-R-8b Plus, EU-R-8s Plus, EU-F-8z ko firikwensin: EU-C-8r, EU-C-mini, EU-CL-mini
• goyon baya ga bene zafin na'urori masu auna sigina
• goyon baya ga na'urori masu auna firikwensin waje da sarrafa yanayi
• goyan bayan na'urori masu auna firikwensin taga mara waya (har zuwa pcs 6 a kowane yanki)
• Yiwuwar sarrafa STT-868, STT-869 ko EU-GX masu kunnawa mara waya (pcs 6 kowane yanki)
• yuwuwar yin aiki da masu kunna wutar lantarki
• yuwuwar yin aiki da bawul ɗin haɗawa - bayan haɗa EU-i-1, EU-i-1m bawul module
• sarrafa na'urar dumama ko sanyaya ta hanyar sadarwa mara amfani
• fitarwa guda 230V don yin famfo
• yuwuwar saita jadawalin aiki na mutum ɗaya don kowane yanki
• yuwuwar sabunta software ta tashar USB.

YADDA AKE SHIGA

ƙwararren mutum ne kawai ya kamata ya shigar da mai kula da WiFi na EU-LX.

GARGADI
Idan mai yin famfo yana buƙatar babban canji na waje, fis ɗin samar da wutar lantarki ko ƙarin sauran na'urar da aka zaɓa don karkatattun igiyoyin ruwa ana ba da shawarar kada su haɗa famfo kai tsaye zuwa abubuwan sarrafa famfo. Don guje wa lalacewa ga na'urar, dole ne a yi amfani da ƙarin da'irar aminci tsakanin mai sarrafawa da famfo. Mai sana'anta yana ba da shawarar adaftar famfo na ZP-01, wanda dole ne a siya daban.

GARGADI
Haɗarin rauni ko mutuwa sakamakon girgiza wutar lantarki akan haɗin kai. Kafin yin aiki a kan mai sarrafawa, cire haɗin wutar lantarki da kiyaye shi daga kunnawa na bazata.

HANKALI
Wayoyin da ba daidai ba na iya lalata mai sarrafawa.

Hoton hoto mai nuna yadda ake haɗawa da sadarwa tare da sauran kayan aiki:

Shigar da capacitor electrolytic
Don rage yanayin yanayin zafi da aka karanta daga firikwensin yankin, yakamata a shigar da ƙaramin ƙarfin lantarki mai ƙarfi 220uF/25V, wanda aka haɗa a layi daya tare da kebul na firikwensin. Lokacin shigar da capacitor, koyaushe kula da polarity ta musamman. Ƙasar abubuwan da aka yiwa alama da farar tsiri ana murƙushewa a cikin dama ta tasha mai haɗa firikwensin, kamar yadda aka gani daga gaban mai sarrafa, kuma an nuna shi a cikin hotuna masu maƙalla. Tasha ta biyu na capacitor an murƙushe ta cikin tasha na mai haɗin hagu. Mun gano cewa wannan maganin ya kawar da gurɓatattun abubuwa. Duk da haka, yana da mahimmanci a lura cewa ka'idar asali ita ce shigar da wayoyi daidai don kauce wa tsangwama. Bai kamata a karkatar da wayoyi kusa da tushen filin lantarki ba, duk da haka, idan irin wannan yanayin ya riga ya faru, yakamata a yi amfani da tacewa a cikin nau'in capacitor.

Haɗin kai tsakanin mai sarrafawa da masu gudanarwa 

Lokacin haɗa masu sarrafawa zuwa mai sarrafawa, ƙare aikin (canza jumper a cikin ON matsayi) a cikin mai sarrafawa da na ƙarshe na masu gudanarwa.

FARKO NA FARKO

Domin mai sarrafawa ya yi aiki daidai, dole ne a bi matakai masu zuwa don farawa na farko:

• Mataki 1: Haɗa mai kula da taro na EU-LX WiFi tare da duk na'urorin da ya kamata a sarrafa Don haɗa wayoyi, cire murfin mai sarrafawa sannan ka haɗa wayoyi - wannan ya kamata a yi kamar yadda aka bayyana akan masu haɗawa da zane-zane a cikin littafin.
• Mataki na 2. Kunna wutar lantarki, duba aikin na'urorin da aka haɗa Bayan haɗa dukkan na'urori, kunna wutar lantarki na mai sarrafawa. Yin amfani da aikin Aiki na Manual (Menu → Menu na Fitter → Aiki na Manual), duba aikin kowane na'urori. Amfani da maɓallai, zaɓi na'urar kuma danna maɓallin MENU - na'urar da za'a bincika yakamata ta kunna. Duba duk na'urorin da aka haɗa ta wannan hanya.
• Mataki na 3. Saita lokaci da kwanan wata Don saita kwanan wata da lokaci na yanzu, zaɓi Menu → Saitunan sarrafawa → Saitunan lokaci.

HANKALI
Za'a iya daidaita lokacin yanzu daga cibiyar sadarwa ta atomatik Menu → Saitunan sarrafawa → Saitunan lokaci → Na atomatik.

Mataki na 4. Sanya na'urori masu auna zafin jiki, masu kula da dakuna Domin EU-LX WiFi mai kula da yankin da aka bayar, dole ne ya karɓi bayani game da zafin jiki na yanzu. Hanya mafi sauƙi ita ce a yi amfani da firikwensin zafin jiki mai waya ko mara waya (misali EU-C-7p, EU-C-mini, EU-CL-mini, EU-C-8r). Koyaya, idan kuna son samun damar canza ƙimar zafin da aka saita kai tsaye daga yankin, zaku iya amfani da masu sarrafa ɗaki, misali EU-R-8b, EU-R-8z, EU-R-8b Plus ko waɗanda aka keɓe: EU- R-12b da EU-R-12s. Don haɗa firikwensin tare da mai sarrafawa, zaɓi: Menu → Menu na Fitter → Yankunan Yankuna… → firikwensin ɗaki → Zaɓi firikwensin.

Mataki na 5. Tsara sauran na'urorin haɗin gwiwar EU-LX WiFi mai kula kuma zai iya aiki tare da na'urori masu zuwa:

• EU-i-1, EU-i-1m
• hadawa bawul module EU-i-1, EU-i-1m- ƙarin lambobin sadarwa, misali EU-MW-1 (6 inji mai kwakwalwa da mai sarrafawa)

Bayan kunna na'ura mai kwakwalwa ta Intanet, mai amfani yana da zaɓi don sarrafa shigarwa ta Intanet ta amfani da aikace-aikacen emodul.pl. Don cikakkun bayanan daidaitawa, koma zuwa littafin jagorar tsarin.

HANKALI
Idan mai amfani yana son yin amfani da waɗannan na'urori yayin aiki, dole ne a haɗa su da/ko rajista.

BAYANIN BAYANIN ALAMOMIN

Ana aiwatar da sarrafawa ta amfani da maɓallan da ke ƙarƙashin nuni.
Nuni mai sarrafawa.

1. Maɓallin MENU – yana shigar da menu mai sarrafawa, yana tabbatar da saituna.
2. maɓalli – ana amfani da shi don bincika ayyukan menu ko rage ƙimar sigogin da aka gyara. Wannan maballin kuma yana canza sigogin aiki tsakanin yankuna.
3. maɓalli – ana amfani da shi don bincika ayyukan menu ko ƙara ƙimar sigogin da aka gyara. Wannan maballin kuma yana canza sigogin aiki tsakanin yankuna.
4. Maɓallin FITA - Fita daga menu mai sarrafawa ko soke saitunan ko kunna allon view (zone, zone).

Sample allo - ZONES 

1. Ranar mako na yanzu
2. Zazzabi na waje
3. Gudun famfo
4. Mai yuwuwar lambar sadarwa mara amfani
5. Lokaci na yanzu
6. Bayani game da yanayin aiki/jadawalin aiki a yankin da ake bi
7. Ƙarfin sigina da matsayin baturi na bayanin firikwensin ɗakin
8. Saita zafin jiki a cikin yankin da aka bayar
9. Yanayin zafin ƙasa na yanzu
10. Zazzabi na yanzu a cikin yankin da aka bayar
11. Bayanin yanki. Lambobin da ake iya gani na nufin firikwensin ɗaki da aka haɗa wanda ke ba da bayani game da zafin jiki na yanzu a yankin da ke da su. Idan yankin a halin yanzu yana dumama ko sanyaya, ya danganta da yanayin, lambar tana walƙiya. Idan ƙararrawa ta faru a yankin da aka bayar, za a nuna alamar motsi maimakon lambobi. Zuwa view sigogin aiki na yanzu na takamaiman yanki, haskaka lambar ta ta amfani da maɓalli.

Sampda Allon - ZONE

1. Zazzabi na waje
2. Halin baturi
3. Lokaci na yanzu
4. Yanayin aiki na yanzu na yankin da aka nuna
5. Yanayin zafin da aka saita na yankin da aka bayar
6. Zazzabi na yanzu na yankin da aka bayar
7. Yanayin zafin ƙasa na yanzu
8. Matsakaicin zafin ƙasa
9. Bayani akan adadin na'urori masu auna firikwensin taga mai rijista a yankin
10. Bayani game da adadin masu yin rajista a yankin
11. Alamar yankin da aka nuna a halin yanzu
12. Matsayin zafi na yanzu a yankin da aka bayar
13. Sunan yanki

AYYUKAN MULKI

YANAYIN AIKI 

Wannan aikin yana ba da damar kunna zaɓin yanayin aiki.

• Yanayin al'ada - saitaccen zafin jiki ya dogara da tsarin saiti
• Yanayin hutu - saita zafin jiki ya dogara da saitunan wannan yanayin
  Menu → Menu na Fitter → Yankuna → Yanki… → Saituna → Saitunan Zazzabi > Yanayin Holiday
• Yanayin tattalin arziki – saita zafin jiki ya dogara da saitunan wannan yanayin
  Menu → Menu na Fitter → Yankuna → Yanki… → Saituna → Saitunan Zazzabi > Yanayin Tattalin Arziki
• Yanayin ta'aziyya - saita zafin jiki ya dogara da saitunan wannan yanayin
  Menu → Menu na Fitter → Yankuna → Yanki… → Saituna → Saitunan zafin jiki> Yanayin ta'aziyya

HANKALI

• Canza yanayin zuwa hutu, tattalin arziki da kwanciyar hankali zai shafi duk yankuna. Yana yiwuwa kawai a gyara yanayin yanayin da aka zaɓa don wani yanki na musamman.
• A cikin yanayin aiki ban da al'ada, ba zai yiwu a canza yanayin zafin da aka saita ba daga matakin mai sarrafa ɗaki.

YANKI

On
Don nuna yankin yana aiki akan allon, yi rijistar firikwensin ciki (duba: Menu na Fitter). Ayyukan yana ba ku damar kashe yankin kuma ku ɓoye sigogi daga babban allo.

Saita zafin jiki
Saitin zafin jiki a cikin yankin yana haifar da saitunan takamaiman yanayin aiki a yankin, watau jadawalin mako-mako. Koyaya, yana yiwuwa a kashe jadawalin kuma saita keɓaɓɓen zazzabi da tsawon lokacin wannan zafin. Bayan wannan lokacin, saita zafin jiki a yankin zai dogara da yanayin da aka saita a baya. A kan ci gaba, saitin ƙimar zafin jiki, tare da lokacin har zuwa ƙarshen ingancin sa, ana nunawa akan babban allo.

HANKALI
Idan an saita tsawon takamaiman yanayin zafin saiti zuwa CON, wannan zafin jiki zai yi aiki na wani lokaci mara iyaka (zazzabi na dindindin).

Yanayin aiki
Mai amfani zai iya view kuma shirya saitunan yanayin aiki don yankin.

• Jadawalin gida - Jadawalin saituna waɗanda ke aiki ga wannan yanki kawai
• Jadawalin Duniya 1-5 - Waɗannan saitunan jadawalin sun shafi duk yankuna, inda suke aiki
• Yanayin zafin jiki na dindindin (CON) - wannan aikin yana ba ku damar saita ƙimar zafin jiki na daban wanda zai kasance mai aiki a cikin yankin da aka bayar har abada, ba tare da la'akari da lokacin rana ba.
• Tare da ƙayyadaddun lokaci - wannan aikin yana ba ku damar saita zafin jiki daban wanda zai yi aiki kawai na wani takamaiman lokaci. Bayan wannan lokacin, zafin jiki zai haifar da yanayin da aka yi amfani da shi a baya (jadawali ko akai-akai ba tare da iyakacin lokaci ba).

Jadawalin gyarawa

Menu → Yankuna → Yanki… → Yanayin Aiki → Jadawalin… → Gyara

1. Kwanakin da saitunan da ke sama ke aiki
2. An saita yanayin zafi a waje da tazarar lokaci
3. Saita yanayin zafi don tazarar lokaci
4. Tsakanin lokaci

Don saita jadawalin:

• Yi amfani da kibiyoyi don zaɓar ɓangaren mako wanda jadawalin da aka saita zai yi aiki (banshi na 1 na mako ko kashi na biyu na mako).
• Yi amfani da maɓallin MENU don zuwa saitunan zafin jiki da aka saita waɗanda zasu yi aiki a waje da tazarar lokaci - saita shi tare da kibau, tabbatar da amfani da maɓallin MENU.
• Yi amfani da maɓallin MENU don zuwa saitunan tazarar lokaci da saita zafin jiki wanda zai kasance mai aiki don ƙayyadadden tazarar lokaci, saita shi ta amfani da kibau, tabbatar da maɓallin MENU.
• Sa'an nan kuma ci gaba zuwa editan kwanakin da za a sanya su zuwa kashi na 1 ko na biyu na mako - ana nuna kwanakin aiki da fari. Ana tabbatar da saitunan tare da maɓallin MENU, kiban suna kewayawa tsakanin kowace rana.

Bayan saita jadawali na duk kwanakin mako, danna maɓallin FITA kuma zaɓi Zaɓin Tabbatarwa tare da maɓallin MENU.

HANKALI
Mai amfani zai iya saita tazarar lokaci daban-daban guda uku a cikin jadawalin da aka bayar (tare da daidaiton mintuna 15).

SAIRIN SARAUTA

• Saitunan lokaci - za'a iya sauke lokaci da kwanan wata ta atomatik daga cibiyar sadarwa idan an haɗa tsarin Intanet kuma yanayin atomatik ya kunna. Hakanan yana yiwuwa ga mai amfani ya saita lokaci da kwanan wata da hannu idan yanayin atomatik baya aiki daidai.
• Saitunan allo - Wannan aikin yana bawa mai amfani damar tsara nuni.
• Sauti da maɓallan - ana amfani da wannan zaɓi don kunna sautin da zai raka latsa maɓallan.

Farashin FITTER

Menu na fitter shine mafi hadaddun menu na mai sarrafawa. Anan, mai amfani yana da faɗin zaɓi na ayyuka waɗanda ke ba da damar iyakar amfani da damar mai sarrafawa.

YANKI
Don kunna yanki akan nunin mai sarrafawa, yi rijista/ kunna firikwensin ciki sannan kunna yankin.

SENSOR
Mai amfani zai iya yin rajista/ kunna kowane nau'in firikwensin: Wayar NTC, RS ko mara waya.

• Ciwon ciki - yana ƙara juriya ga zafin jiki na ɗaki a cikin kewayon 0.1 ÷ 5 ° C, wanda aka kunna ƙarin dumama / sanyaya.
  Exampda: Yanayin da aka saita saitin shine 23°C Hysteresis is 1°C firikwensin dakin zai fara nuna zafin dakin bayan zafin jiki ya faɗi zuwa 22°C.
• Daidaitawa - Ana yin gyaran gyare-gyaren ɗaki yayin haɗuwa ko bayan tsawon lokacin amfani da firikwensin idan yanayin dakin da aka nuna ya bambanta daga ainihin. Yanayin daidaitawa: daga -10 ° C zuwa + 10 ° C tare da mataki na 0.1 ° C.

SATA ZAFIN
An bayyana aikin a cikin Menu → Yanki yanki.

YANAYIN AIKI
An bayyana aikin a cikin Menu → Yanki yanki.

TSARIN FITARWA
Wannan zaɓin yana sarrafa abubuwan da aka fitar: famfo na bene, sadarwar da ba ta da kyauta da abubuwan firikwensin 1-8 (NTC don sarrafa zafin jiki a cikin yanki ko firikwensin bene don sarrafa zafin bene). Fitowar firikwensin 1-8 an sanya shi zuwa yankuna 1-8, bi da bi. Nau'in firikwensin da aka zaɓa anan zai bayyana ta tsohuwa a cikin zaɓi: Menu → Menu na Fitter → Yankuna → Yankuna… → Fitar daki → Zaɓi firikwensin (don firikwensin zafin jiki) da Menu → Menu na Fitter → Yankuna → Yankuna… → Zaɓi firikwensin (don firikwensin ƙasa). Ana amfani da abubuwan firikwensin biyu don yin rajistar yankin ta waya. Hakanan aikin yana ba da damar kashe famfo da lambar sadarwa a wani yanki da aka bayar. Irin wannan yanki, duk da buƙatar dumama, ba zai shiga cikin kulawa ba.

STINGS

• Ikon yanayi – zaɓi don kunna/kashe ikon sarrafa yanayi.

HANKALI
Ikon yanayi yana aiki ne kawai idan a Menu → Fitter's menu → firikwensin waje, an duba zaɓin sarrafa yanayin.

• Dumama - aikin yana ba da damar / hana aikin dumama. Hakanan akwai zaɓi na jadawali wanda zai kasance mai aiki don yankin yayin dumama da kuma gyara yanayin zafin jiki daban.
• Sanyaya - wannan aikin yana kunna / yana kashe aikin sanyaya. Hakanan akwai zaɓi na jadawali wanda zai kasance mai aiki a yankin yayin sanyaya da kuma gyara yanayin zafi dabam dabam.
• Saitunan zafin jiki - Ana amfani da aikin don saita zafin jiki don yanayin aiki guda uku (Yanayin Holiday, Yanayin Tattalin Arziki, Yanayin Ta'aziyya).

Mafi kyawun farawa
Mafi kyawun farawa shine tsarin sarrafa dumama mai hankali. Yana ba da damar ci gaba da saka idanu akan tsarin dumama da amfani da wannan bayanin don kunna dumama ta atomatik kafin lokacin da ake buƙata don isa yanayin yanayin da aka saita. Wannan tsarin baya buƙatar kowane hannu a ɓangaren mai amfani kuma yana amsa daidai ga duk wani canje-canjen da ke shafar ingantaccen tsarin dumama. Idan, don example, akwai canje-canjen da aka yi don shigarwa kuma gidan ya yi zafi da sauri, tsarin farawa mafi kyau zai gano canji a canjin zafin jiki na gaba wanda aka tsara sakamakon jadawalin, kuma a cikin sake zagayowar zai jinkirta kunna dumama har sai lokacin ƙarshe, rage lokacin da ake buƙata don isa yanayin zafin da aka saita.

• lokacin da aka tsara na canza yanayin tattalin arziki zuwa mai dadi Kunna wannan aikin zai tabbatar da cewa lokacin da aka tsara canjin yanayin zafin da aka saita sakamakon jadawalin ya faru, yanayin zafin da ke cikin ɗakin zai kasance kusa da ƙimar da ake so.

HANKALI
Mafi kyawun aikin farawa yana aiki ne kawai a yanayin dumama.

ACTUATORS

• Saituna
• SIGMA - aikin yana ba da damar sarrafawa mara kyau na mai kunna wutar lantarki. Mai amfani zai iya saita mafi ƙanƙanta da matsakaicin buɗewa na bawul - wannan yana nufin cewa matakin buɗewa da rufewa na bawul ɗin ba zai taɓa wuce waɗannan ƙimar ba. Bugu da ƙari, mai amfani yana daidaita ma'aunin Range, wanda ke ƙayyade a wane zafin dakin da bawul ɗin zai fara rufewa da buɗewa.

HANKALI
Ayyukan Sigma yana samuwa kawai don STT-868 ko STT-869 masu kunnawa.

Example

• Yanayin saiti na yanki: 23 C
• Mafi ƙarancin buɗewa: 30%
• Matsakaicin buɗewa: 90%
• Kewaye: 5 C
• Ciwon ciki: 2 C

Tare da saitunan da ke sama, mai kunnawa zai fara rufewa da zarar yanayin zafi a yankin ya kai 18 ° C (zazzabi da aka saita ya rage ƙimar kewayon). Mafi ƙarancin buɗewa zai faru lokacin da zafin yanki ya kai wurin da aka saita.
Da zarar an kai wurin da aka saita, zazzabi a yankin zai fara raguwa. Lokacin da ya kai 21°C (saitin zafin jiki ya rage darajar hysteresis), mai kunnawa zai fara buɗewa yana kaiwa matsakaicin buɗewa lokacin da zazzabi a yankin ya kai 18 ° C.

Kariya - Lokacin da aka zaɓi wannan aikin, mai sarrafawa yana duba zafin jiki. Idan saitin zafin jiki ya wuce adadin digiri a cikin ma'aunin Range, to duk masu kunnawa a cikin yankin da aka bayar za a rufe su (0%). Wannan aikin yana aiki ne kawai tare da kunna aikin SIGMA.

• Yanayin gaggawa - Wannan aikin yana bawa mai amfani damar ayyana buɗewar mai kunnawa wanda za'a tilastawa a yanayin ƙararrawa a cikin yankin da aka bayar (rashin firikwensin, kuskuren sadarwa).
• Actuator 1-6 - zaɓi yana bawa mai amfani damar yin rijistar mai kunnawa mara waya. Don yin wannan, zaɓi Rajista kuma danna maɓallin sadarwa a taƙaice akan mai kunnawa. Bayan nasarar yin rajista, ƙarin aikin bayani yana bayyana, inda mai amfani zai iya view sigogin mai kunnawa, misali matsayin baturi, kewayon, da sauransu. Hakanan yana yiwuwa a share ɗaya ko duk masu kunnawa a lokaci guda.

SENSORS TA GINI

Saituna

• Kunnawa - aikin yana ba da damar kunna na'urori masu auna firikwensin taga a cikin yankin da aka bayar (ana buƙatar rajistar firikwensin taga).
• Lokacin jinkiri - Wannan aikin yana ba ku damar saita lokacin jinkiri. Bayan lokacin jinkirin da aka saita, babban mai kula yana amsa buɗe taga kuma yana toshe dumama ko sanyaya a cikin yankin.
  Example: An saita lokacin jinkiri zuwa mintuna 10. Da zarar an buɗe taga, firikwensin yana aika bayanai zuwa babban mai kula game da buɗe taga. Na'urar firikwensin yana tabbatar da halin yanzu na taga lokaci zuwa lokaci. Idan bayan lokacin jinkiri (minti 10) taga yana buɗewa, babban mai sarrafawa zai rufe masu kunnawa kuma ya kashe zafi mai zafi na yankin.

HANKALI
Idan an saita lokacin jinkiri zuwa 0, to, siginar zuwa ga masu kunnawa don rufewa za a watsa nan take.

• Mara waya - zaɓi don yin rijistar firikwensin taga (pcs 1-6 a kowane yanki). Don yin wannan, zaɓi Rijista kuma a taƙaice danna maɓallin sadarwa akan firikwensin. Bayan nasarar rajista, ƙarin aikin Bayani yana bayyana, inda mai amfani zai iya view sigogin firikwensin, misali matsayin baturi, kewayo, da sauransu. Hakanan yana yiwuwa a share firikwensin da aka bayar ko duka a lokaci guda.

RUWAN BANA

Sensor na bene

• Zaɓin Sensor - Ana amfani da wannan aikin don kunna (waya) ko rajista (mara waya) firikwensin bene. Game da firikwensin mara waya, yi rijista ta bugu da žari danna maɓallin sadarwa akan firikwensin.
• Hysteresis - yana ƙara haƙuri ga zafin jiki a cikin kewayon 0.1 ÷ 5 ° C, wanda aka kunna ƙarin dumama / sanyaya.

Exampda:
Matsakaicin zafin jiki na ƙasa shine 45°C Hysteresis shine 2°C Mai sarrafawa zai kashe lambar sadarwa bayan wuce 45°C a firikwensin ƙasa. Idan zafin jiki ya fara faɗuwa, za a sake kunna lambar sadarwa bayan yanayin zafi a ƙasa firikwensin ya faɗi zuwa 43 C (sai dai idan zafin ɗakin ya kai).

• Daidaitawa - Ana yin gyaran firikwensin bene yayin taro ko bayan tsawon lokacin amfani da firikwensin idan yanayin zafin bene da aka nuna ya bambanta daga ainihin. Yanayin daidaitawa: daga -10 ° C zuwa + 10 ° C tare da mataki na 0.1 ° C.

HANKALI
Ba a amfani da firikwensin bene yayin yanayin sanyaya.

Yanayin aiki

• A kashe - Zaɓin wannan zaɓi yana hana yanayin dumama ƙasa, watau Kariyar bene ko Yanayin Ta'aziyya basa aiki.
• Kariyar bene - Ana amfani da wannan aikin don kiyaye yanayin zafin ƙasa a ƙasa da matsakaicin matsakaicin zafin jiki don kare tsarin daga zafi mai zafi. Lokacin da zafin jiki ya tashi zuwa matsakaicin matsakaicin zafin jiki, za a kashe sake dumama yankin.
• Yanayin ta'aziyya - Ana amfani da wannan aikin don kula da yanayin zafi mai dadi, watau mai sarrafawa zai kula da zafin jiki na yanzu. Lokacin da zafin jiki ya tashi zuwa matsakaicin matsakaicin zafin jiki, za a kashe dumama yankin don kare tsarin daga zafi mai zafi. Lokacin da zafin ƙasa ya faɗi ƙasa da ƙaramin zafin da aka saita, za a sake kunna yankin sake zafi.

Min. zafin jiki
Ana amfani da aikin don saita ƙananan zafin jiki don kare ƙasa daga sanyi. Lokacin da zafin ƙasa ya faɗi ƙasa da ƙaramin zafin da aka saita, za a sake kunna yankin sake zafi. Wannan aikin yana samuwa ne kawai lokacin da ka zaɓi Yanayin Ta'aziyya.

Max. zafin jiki
Matsakaicin zafin jiki na ƙasa shine madaidaicin zafin ƙasa wanda ke sama wanda mai sarrafawa zai kashe dumama ba tare da la'akari da yanayin zafin ɗakin na yanzu ba. Wannan aikin yana kare shigarwa daga zafi fiye da kima.

KARIN LABARI
Ayyukan yana ba ku damar sarrafa ƙarin lambobi. Da farko, wajibi ne don yin rajistar irin wannan lambar sadarwa (1-6 pcs.). Don yin wannan, zaɓi zaɓin Rajista kuma danna maɓallin sadarwa a taƙaice akan na'urar, misali MW-1.
Bayan yin rijista da kunna na'urar, ayyuka masu zuwa zasu bayyana:

• Bayani - bayani game da matsayi, yanayin aiki da kewayon lamba ana nunawa akan allon mai sarrafawa
• Kunnawa – zaɓi don kunna/musa aikin lamba
• Yanayin aiki – akwai zaɓi na mai amfani don kunna zaɓin yanayin aiki na lamba
• Yanayin lokaci - aikin yana ba da damar saita lokacin aiki na lamba don takamaiman lokaci Mai amfani zai iya canza matsayin lamba ta zaɓi / cire zaɓin Active sannan saita Tsawon lokacin wannan yanayin.
• Yanayin dindindin – aikin yana ba da damar saita lambar sadarwa ta yi aiki na dindindin. Yana yiwuwa a canza matsayin lamba ta zaɓi/ɓaɓar zaɓi mai aiki
• Relays - lambar sadarwa tana aiki bisa ga yankunan da aka sanya ta
• Dehumidification - idan Maɗaukakin Humidity ya wuce a cikin yankin da aka ba, wannan zaɓi yana ba ku damar fara na'urar busar da iska.
• Saitunan jadawali - aikin yana ba ku damar saita jadawalin aiki na lamba daban (ba tare da la'akari da matsayin yankunan masu sarrafawa ba).

HANKALI
Aikin Dehumidification yana aiki ne kawai a cikin yanayin aikin sanyaya.

• Share - ana amfani da wannan zaɓi don share lambar da aka zaɓa.

MIXING BAYANI
Mai kula da WiFi na EU-LX na iya aiki da ƙarin bawul ta amfani da ƙirar bawul (misali i-1m). Wannan bawul ɗin yana da sadarwar RS, amma wajibi ne don aiwatar da tsarin rajista, wanda zai buƙaci ka faɗi lambar ƙirar da ke bayan gidanta, ko a allon bayanan software). Bayan daidaitaccen rajista, yana yiwuwa a saita sigogi ɗaya na Ƙarin bawul.

• Bayani - aikin yana ba ku damar view yanayin sigogi na bawul.
• Yi rijista – Bayan shigar da lambar a bayan bawul ko a cikin Menu → Bayanin software, zaku iya yin rajistar bawul tare da babban mai sarrafawa.
• Yanayin manual - mai amfani yana da ikon dakatar da aikin bawul da hannu, buɗe / rufe bawul kuma kunna famfo da kashewa don sarrafa daidaitaccen aikin na'urorin.
• Sigar – Wannan aikin yana nuna lambar sigar software ta bawul. Wannan bayanin yana da mahimmanci lokacin tuntuɓar sabis ɗin.
• Cire Valve - Ana amfani da wannan aikin don share bawul gaba ɗaya. Ana amfani da aikin, misaliample, lokacin cire bawul ko maye gurbin module (to ya zama dole don sake yin rajistar sabon tsarin).
• On – zaɓi don kunna ko kashe bawul na ɗan lokaci.
• Bawul saita zafin jiki - wannan siga yana ba ku damar saita zafin saiti na bawul.
• Yanayin bazara - kunna yanayin bazara yana rufe bawul don guje wa dumama gidan da ba dole ba. Idan zafin wutar lantarki ya yi yawa (ana buƙatar kariyar tukunyar jirgi), za a buɗe bawul ɗin a yanayin gaggawa. Wannan yanayin baya aiki a Yanayin Kariya na Komawa.
• Daidaitawa - Ana iya amfani da wannan aikin don daidaita bawul ɗin da aka gina a ciki, misali bayan dogon amfani. Lokacin daidaitawa, ana saita bawul ɗin zuwa wuri mai aminci, watau don CH bawul da nau'in kariyar Komawa don isa cikakkiyar matsayinsa, kuma don bawul ɗin bene da nau'in Cooling, don komawa gabaɗaya zuwa wurin da yake rufe.
• bugun jini guda daya - Wannan shine matsakaicin matsakaicin bugun jini guda ɗaya (buɗewa ko rufewa) wanda bawul ɗin zai iya yi yayin yanayin zafi ɗaya.ampling. Idan zafin jiki yana kusa da wurin da aka saita, ana ƙididdige wannan bugun jini bisa ma'aunin daidaituwar daidaito. Karamin bugun naúrar, ana iya isa daidai gwargwadon yanayin da aka saita, amma saitin zafin jiki ya kai tsawon lokaci.
• Mafi ƙarancin buɗewa - Ma'auni wanda ke ƙayyade mafi ƙarancin buɗewar bawul a cikin ɗari. Wannan siga yana ba da damar barin bawul ɗin ɗan buɗewa don kula da mafi ƙarancin gudu.

HANKALI
Idan muka saita mafi ƙarancin buɗewa na bawul zuwa 0% (cikakken rufewa), famfo ba zai yi aiki ba lokacin da bawul ɗin ya rufe.

• Lokacin budewa - Ma'auni wanda ke ƙayyade lokacin da ake ɗaukar valve actuator don buɗe bawul daga 0% zuwa 100%. Ya kamata a zaɓi wannan lokacin don dacewa da na mai kunna bawul (kamar yadda aka nuna akan farantin sunansa).
• Dakatawar auna - Wannan siga yana ƙayyade mitar aunawa (sarrafawa) na zafin ruwa a ƙasa na bawul ɗin shigarwa na CH. Idan firikwensin ya nuna canjin zafin jiki (bangare daga wurin da aka saita), to, bawul ɗin solenoid zai buɗe ko rufe ta ƙimar da aka saita don komawa zuwa zafin da aka saita.
• Valve Hysteresis - Ana amfani da wannan zaɓin don saita yanayin yanayin zafin bawul. Wannan shine bambanci tsakanin zafin jiki da aka saita da zafin da bawul ɗin zai fara rufewa ko buɗewa.

Exampda: Matsakaicin zafin jiki na Valve: 50°C

• Ciwon ciki: 2°C
• Tasha Valve: 50°C
• Buɗewar Valve: 48°C
• Rufe Valve: 52°C

Lokacin da aka saita zafin jiki shine 50 ° C kuma hysteresis ya kasance 2 ° C, bawul ɗin zai tsaya a wuri ɗaya lokacin da zafin jiki ya kai 50 ° C, lokacin da zafin jiki ya faɗi zuwa 48 ° C, zai fara buɗewa kuma idan ya kai 52 °C, bawul ɗin zai fara rufewa don rage yawan zafin jiki.

• Nau'in Valve - Wannan zaɓi yana bawa mai amfani damar zaɓar nau'ikan bawul masu zuwa:
• Farashin CH - saita lokacin da muke son sarrafa zafin jiki a cikin da'irar CH ta amfani da firikwensin bawul. Za a sanya firikwensin bawul a ƙasa na bawul ɗin haɗawa akan bututun wadata.
• Bawul ɗin bene – saita lokacin da muke son daidaita zafin jiki akan da'irar dumama ƙasa. Nau'in bene yana kare tsarin bene daga matsanancin zafi. Idan nau'in bawul ɗin an saita shi azaman CH kuma an haɗa shi da tsarin ƙasa, yana iya haifar da lalacewa ga tsarin ƙasa.
• Komawa kariya - saita lokacin da muke son daidaita zafin jiki a dawowar shigarwar mu ta amfani da firikwensin dawowa. Komawa kawai da na'urori masu auna wutar lantarki suna aiki a cikin irin wannan nau'in bawul, kuma ba a haɗa firikwensin bawul zuwa mai sarrafawa. A cikin wannan tsari, bawul ɗin yana kare dawowar tukunyar jirgi daga zafin sanyi a matsayin fifiko, kuma idan an zaɓi aikin kariya na Boiler, yana kuma kare tukunyar jirgi daga zazzaɓi. Idan an rufe bawul (0% bude), ruwan yana gudana ne kawai a cikin ɗan gajeren lokaci, yayin da cikakken buɗewa na bawul (100%) yana nufin cewa an rufe gajeriyar kewayawa kuma ruwan yana gudana ta duk tsarin dumama na tsakiya.

HANKALI
Idan Kariyar Boiler ta kashe, zafin jiki na CH ba zai shafi buɗe bawul ɗin ba. A cikin matsanancin yanayi, tukunyar jirgi na iya yin zafi sosai, don haka ana ba da shawarar saita saitunan kariyar tukunyar jirgi.
Don irin wannan nau'in bawul, koma zuwa Allon Kariyar Komawa.

• Sanyi - saita lokacin da muke son daidaita yanayin zafin jiki na tsarin sanyaya (bawul yana buɗewa lokacin da zafin jiki ya kasance ƙasa da zafin jiki na firikwensin bawul). Kariyar tukunyar jirgi da Kariyar dawowa ba sa aiki a cikin irin wannan bawul. Irin wannan bawul ɗin yana aiki duk da yanayin bazara mai aiki, yayin da famfo ke aiki ta amfani da ƙofar rufewa. Bugu da kari, wannan nau'in bawul yana da keɓantaccen yanayin dumama wanda aka haɗa azaman aikin firikwensin yanayi.
• Yana buɗewa a cikin CH calibration - Lokacin da aka kunna wannan aikin, bawul ɗin yana fara daidaitawa daga lokacin buɗewa. Wannan aikin yana samuwa ne kawai lokacin da aka saita nau'in bawul azaman CH Valve.
• dumama bene - bazara - Wannan aikin yana bayyane ne kawai bayan zaɓar nau'in bawul kamar Valve Floor. Lokacin da aka kunna wannan aikin, bawul ɗin bene zai yi aiki a Yanayin bazara.
• Ikon yanayi - Domin aikin yanayi ya kasance mai aiki, sanya firikwensin waje a cikin wani wuri da ba a keɓe ba, wanda ba a fallasa shi ga tasirin yanayi. Bayan shigarwa da haɗa firikwensin, kunna aikin sarrafa yanayi a cikin menu mai sarrafawa.

HANKALI
Babu wannan saitin a cikin Yanayin Sanyaya da Komawa Kariya.

Ƙunƙarar zafi - wannan shine maɗaukaki bisa ga abin da aka ƙayyade yawan zafin jiki na mai sarrafawa bisa ga zafin jiki na waje. Domin bawul ɗin ya yi aiki yadda ya kamata, an saita yanayin zafin da aka saita (a ƙarƙashin bawul) don yanayin zafi na waje guda huɗu: -20C, -10°C, 0°C da 10°C. Akwai keɓan yanayin dumama don yanayin sanyaya. An saita shi don matsakaicin zafin jiki na waje: 10 ° C, 20 ° C, 30 ° C, 40 ° C.

Mai kula da daki

• Nau'in mai sarrafawa
• Sarrafa ba tare da mai kula da ɗakin ba - Ya kamata a duba wannan zaɓin lokacin da ba mu so mai kula da ɗakin ya shafi aikin bawul.
• Mai sarrafa RS – Rage – duba wannan zaɓin idan mai kula da daki zai sarrafa bawul ɗin sanye take da sadarwar RS. Lokacin da aka duba wannan aikin, mai sarrafawa zai yi aiki bisa ga yanayin ƙananan ɗaki. siga.
• Mai sarrafa RS - rabo - Lokacin da aka kunna wannan mai sarrafa, tukunyar jirgi na yanzu da zafin bawul na iya zama viewed. Tare da wannan aikin da aka duba, mai sarrafawa zai yi aiki bisa ga Bambancin Zazzabi da Matsalolin Canjin Zazzabi.
• Daidaitaccen mai kula da ɗaki – ana duba wannan zaɓi idan mai kula da jihohi biyu ne zai sarrafa bawul (ba a sanye da sadarwar RS ba). Lokacin da aka duba wannan aikin, mai sarrafawa zai yi aiki bisa ga ƙananan ma'aunin zafin jiki mai sarrafa ɗaki.
  • Mai sarrafa ɗaki. ƙananan - A cikin wannan saitin, saita ƙimar ta wanda bawul ɗin zai rage yawan zafin jiki da aka saita da zarar an kai ga zafin da aka saita a cikin mai sarrafa ɗakin (ɗakin ɗakin).

HANKALI
Wannan siga ya shafi daidaitaccen mai sarrafa ɗaki da rage ayyuka na RS.

• • Bambancin zafin ɗaki - Wannan saitin yana ƙayyade canjin naúrar a cikin zafin jiki na yanzu (zuwa 0.1 ° C mafi kusa) wanda wani takamaiman canji a cikin saitin zafin bawul zai faru.
  • Canjin yanayin da aka saita - Wannan saitin yana ƙayyade digiri nawa zafin bawul ɗin zai ƙaru ko raguwa tare da canjin naúrar a cikin zafin jiki (duba: Bambancin zafin ɗakin). Wannan aikin yana aiki ne kawai tare da mai sarrafa ɗakin RS kuma yana da alaƙa kusa da ma'aunin bambancin zafin ɗakin.

Exampda: Bambancin zafin ɗaki: 0.5°C

• • Canjin yanayin zafin bawul: 1°C
  • Saitin zafin wuta: 40°C
  • Mai sarrafa ɗaki saita yanayin zafi: 23°C

Idan zafin dakin ya tashi zuwa 23.5°C (ta 0.5°C sama da yanayin dakin da aka saita), bawul ɗin yana rufewa da saiti na 39°C (ta 1°C).

HANKALI
Ma'aunin ya shafi aikin daidaita daidaitattun RS.

• Ayyukan mai kula da ɗaki - A cikin wannan aikin, dole ne a saita ko bawul ɗin zai rufe (Rufewa) ko kuma zafin jiki zai ragu (Mai kula da ɗakin daki) da zarar an zafi.
• Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa ) Ana amfani da shi don ƙayyade bugun jini. Mafi kusa da yanayin da aka saita, ƙananan bugun jini. Idan wannan ƙididdiga yana da girma, bawul ɗin zai kai ga buɗe irin wannan da sauri, amma zai zama ƙasa da madaidaici. Kashi na kashitage na buɗe raka'a ana ƙididdige su ta amfani da dabara mai zuwa: (saitin zafin jiki - yanayin firikwensin.) x (madaidaicin daidaituwa/10)
• Matsakaicin zafin jiki na ƙasa - Wannan aikin yana ƙayyade matsakaicin zafin jiki wanda firikwensin bawul zai iya kaiwa (idan an zaɓi bawul ɗin bene). Lokacin da wannan darajar ta kai, bawul ɗin yana rufewa, yana kashe famfo, kuma bayanin game da zafi na bene yana bayyana akan babban allon mai sarrafawa.

HANKALI
Ana iya ganin wannan kawai idan nau'in bawul ɗin an saita zuwa bawul ɗin bene.

• Hanyar buɗewa - Idan, bayan haɗa bawul zuwa mai sarrafawa, ya nuna cewa ya kamata a haɗa shi a cikin kishiyar shugabanci, ba lallai ba ne don canza layin samar da kayayyaki, amma yana yiwuwa a canza hanyar budewa na bawul din. ta hanyar zabar hanyar da aka zaɓa: Dama ko Hagu.
• Zaɓin Sensor - Wannan zaɓi ya shafi firikwensin dawowa da firikwensin waje kuma yana ba ku damar sanin ko ƙarin aikin bawul ɗin ya kamata ya yi la'akari da Self na bawul ɗin ko Babban firikwensin (kawai a cikin Yanayin Bayi).
• Zaɓin firikwensin CH - Wannan zaɓi ya shafi firikwensin CH kuma yana ba ku damar sanin ko aikin ƙarin bawul ɗin ya kamata yayi la'akari da Self na bawul ɗin ko Babban firikwensin (Sai ​​a cikin yanayin bawa).
• Kariyar tukunyar jirgi - Wannan yana ba da kariya daga matsanancin zafin jiki na CH, kuma an yi niyya don hana haɓakar haɗarin zafin jiki na tukunyar jirgi. Dole ne mai amfani ya fara saita matsakaicin madaidaicin zafin tukunyar jirgi. A cikin yanayin hawan zafin jiki mai haɗari, bawul ya fara buɗewa don kwantar da tukunyar jirgi. Mai amfani kuma yana saita matsakaicin halaltaccen zafin jiki na CH, bayan haka bawul ɗin zai buɗe.

HANKALI
Aikin baya aiki don nau'ikan bawul ɗin sanyaya da bene.

• Kariyar dawowa - Wannan aikin yana ba da damar saita kariyar tukunyar jirgi daga ruwan sanyi mai yawa da ke dawowa daga babban da'irar, wanda zai iya haifar da ƙarancin lalatawar tukunyar jirgi. Kariyar dawowa tana aiki ta yadda lokacin da zafin jiki ya yi ƙasa sosai, bawul ɗin yana rufewa har sai ɗan gajeren zangon tukunyar jirgi ya kai yanayin da ake buƙata.

HANKALI
Aikin baya bayyana don nau'in bawul ɗin Cooling.

Bawul famfo

• Hanyoyin aiki na famfo - aikin yana ba ku damar zaɓar yanayin aikin famfo:
  • KASHE Koyaushe - ana kashe famfo na dindindin kuma mai sarrafawa kawai yana sarrafa aikin bawul ɗin
  • Koyaushe ON - famfo yana gudana a kowane lokaci ba tare da la'akari da yanayin zafi ba
  • Sama da bakin kofa - famfo yana kunna sama da saitin canjin yanayin. Idan ana so a kunna famfo sama da bakin kofa, dole ne a saita zazzabi mai sauyawa na bakin kofa. Ana la'akari da ƙimar daga firikwensin CH.
• Famfo na kunna zafin jiki - Wannan zaɓin ya shafi famfo mai aiki a sama da bakin kofa. Fam ɗin bawul ɗin zai kunna lokacin da firikwensin tukunyar jirgi ya kai zafin canjin famfo.
• Pump anti-Stop - Lokacin da aka kunna, famfon bawul zai kunna kowane kwanaki 10 na mintuna 2. Wannan yana hana ruwa lalata shigarwa a wajen lokacin dumama.
• Rufe ƙasa da iyakar zafin jiki - Lokacin da aka kunna wannan aikin (duba zaɓin da aka kunna), bawul ɗin zai kasance a rufe har sai firikwensin tukunyar jirgi ya kai zafin sauya famfo.

HANKALI
Idan ƙarin ƙirar bawul ɗin ƙirar i-1 ne, ana iya saita ayyukan hana ɓarna na famfo da rufewar da ke ƙasa bakin kofa kai tsaye daga ƙaramin menu na wannan rukunin.

• Mai kula da ɗakin famfo na Valve - Zaɓin da mai sarrafa ɗakin ke kashe famfo sau ɗaya mai zafi.
• Kawai famfo - Lokacin da aka kunna, mai sarrafawa yana sarrafa famfo kawai kuma ba a sarrafa bawul ɗin.
• Ƙimar firikwensin waje - Ana amfani da wannan aikin don daidaita firikwensin waje, ana yin shi a lokacin shigarwa ko bayan dogon amfani da firikwensin idan yanayin zafi na waje da aka nuna ya bambanta daga ainihin. Mai amfani yana ƙayyade ƙimar gyara da aka yi amfani da shi (daidaita kewayon: -10 zuwa +10°C).
• Rufe Valve - Siga wanda aka saita halayen bawul a yanayin CH bayan an kashe shi. Kunna wannan zaɓi yana rufe bawul ɗin kuma kashewa yana buɗe shi.
• Ikon Valve na mako-mako - Ikon mako-mako yana ba ku damar tsara ɓacin rai na saita zafin bawul akan takamaiman kwanakin mako a takamaiman lokuta. Matsalolin zafin jiki da aka saita suna cikin kewayon +/-10°C.
  Don kunna sarrafawa na mako-mako, zaɓi kuma duba Yanayin 1 ko Yanayin 2. Ana iya samun cikakkun saitunan waɗannan hanyoyin a cikin sassan da ke cikin menu na ƙasa: Saita Yanayin 1 da Set Mode 2.

A LURA
Don daidaitaccen aiki na wannan aikin, dole ne a saita kwanan wata da lokaci na yanzu.

MODE 1 - a cikin wannan yanayin, yana yiwuwa a shirya sabani na yanayin zafin jiki na kowace rana na mako daban. Don yin wannan:

• Zaɓi zaɓi: Saita Yanayin 1
• Zaɓi ranar mako wanda kuke son canza saitunan zafin jiki
• Yi amfani da maɓallan don zaɓar lokacin da kake son canza yanayin zafi. Tabbatar da zaɓi ta latsa maɓallin MENU
• Zaɓuɓɓuka suna bayyana a ƙasa, zaɓi CHANJI ta danna maɓallin MENU lokacin da aka haskaka shi da fari.
• Sannan rage ko ƙara yawan zafin jiki ta ƙimar da aka zaɓa kuma tabbatar.
• Idan kuna son amfani da canjin iri ɗaya kuma a cikin sa'o'in maƙwabta, danna maɓallin MENU akan saitin da aka zaɓa, sannan bayan zaɓin ya bayyana a ƙasan allon, zaɓi COPY kuma kwafi saitin zuwa sa'a mai zuwa ko baya ta amfani da maɓalli. Tabbatar da saitunan ta latsa MENU.

Exampda:

A wannan yanayin, idan yanayin zafin da aka saita akan bawul ɗin ya kasance 50 ° C, a ranar Litinin, daga 4 00 zuwa 7 00 hours, zazzabi da aka saita akan bawul ɗin zai ƙaru da 5 C, ko zuwa 55 C; a cikin sa'o'i daga 7 00 zuwa 14 00 zai ragu da 10 C, don haka zai zama 40 C, yayin da tsakanin 17 00 da 22 00 zai karu zuwa 57 C. MODE 2 - a cikin wannan yanayin, yana yiwuwa a tsara tsarin. sabawa yanayin zafi daki-daki don duk kwanakin aiki (Litinin - Juma'a) da kuma na karshen mako (Asabar - Lahadi). Don yin wannan:

• Zaɓi zaɓi: Saita Yanayin 2
• Zaɓi ɓangaren mako wanda kuke so don canza saitunan zafin jiki
• Tsarin gaba ɗaya daidai yake da na Mode 1

Exampda:

A wannan yanayin, idan zazzabi da aka saita akan bawul ɗin shine 50 C Litinin zuwa Jumma'a, daga 4 00 zuwa 7 00, zazzabi akan bawul ɗin zai ƙaru da 5 C, ko zuwa 55 C; a cikin sa'o'i daga 7 00 zuwa 14 00 zai ragu da 10 C, don haka zai zama 40 C, yayin da tsakanin 17 00 da 22 00 zai karu zuwa 57 C. A karshen mako, daga 6 00 zuwa 9 00 hours, zafin jiki a kan bawul zai tashi da 5 C, wato zuwa 55 C, kuma tsakanin 17 00 da 22 00 zai tashi zuwa 57 C.

• Saitunan masana'anta - Wannan ma'aunin yana ba ku damar komawa zuwa saitunan bawul ɗin da aka bayar ta mai ƙira. Maido da saitunan masana'anta yana canza nau'in bawul zuwa bawul ɗin CH.

INTERNET MODULE
Tsarin Intanet na'ura ce da ke ba da damar sarrafa ramut na shigarwa. Mai amfani zai iya sarrafa aikin na'urori daban-daban kuma ya canza wasu sigogi ta amfani da aikace-aikacen emodul.pl. Na'urar tana da ginanniyar tsarin Intanet. Bayan kunna tsarin Intanet kuma zaɓi zaɓi na DHCP, mai sarrafawa zai dawo da sigogi ta atomatik kamar: adireshin IP, mashin IP, adireshin Ƙofar da adireshin DNS daga cibiyar sadarwar gida.

Saitunan cibiyar sadarwa da ake buƙata
Domin tsarin Intanet ya yi aiki daidai, ana buƙatar haɗa tsarin zuwa cibiyar sadarwa tare da uwar garken DHCP da tashar tashar jiragen ruwa ta 2000. Da zarar tsarin Intanet ya haɗa daidai da hanyar sadarwa, je zuwa menu na saitunan module (a cikin master controller). Idan cibiyar sadarwar ba ta da uwar garken DHCP, dole ne a saita tsarin Intanet ta mai gudanarwa ta shigar da sigogi masu dacewa (DHCP, Adireshin IP, Adireshin Ƙofar, Mashin Subnet, Adireshin DNS). Ana iya aiwatar da tsarin ta:

1. Jeka menu na saituna na tsarin Intanet.
2. Zaɓi zaɓin "An kunna".
3. Sannan duba idan an duba zaɓin "DHCP".
4. Shigar da "Zabin WIFI"
5. Sannan zaɓi hanyar sadarwar WIFI ɗin ku kuma shigar da kalmar wucewa.
6. Jira na ɗan lokaci (kimanin minti 1) kuma duba idan an sanya adireshin IP ɗin. Je zuwa shafin "IP Address" kuma duba idan darajar ta bambanta da 0.0.0.0/ -.-.-.- .
   • Idan darajar har yanzu tana nuna 0.0.0.0 / -.-.-.-.- duba saitunan cibiyar sadarwa ko haɗin Ethernet tsakanin tsarin Intanet da na'urar.
7. Bayan sanya adireshin IP daidai, za mu iya fara yin rijistar tsarin don samar da lambar da ake buƙata don sanya shi zuwa asusun aikace-aikacen.

HANYAR HANYA
Wannan aikin yana ba ku damar sarrafa aikin na'urori ɗaya. Mai amfani zai iya kunna kowace na'urar da hannu: famfo, lamba mara amfani da masu kunna bawul guda ɗaya. Ana ba da shawarar yin amfani da yanayin aiki na hannu, don bincika daidaitaccen aiki na na'urorin da aka haɗa a farkon farawa.

SENSOR NA WAJE

HANKALI
Wannan aikin yana samuwa ne kawai lokacin da aka yi rajistar firikwensin waje a cikin EU-LX WiFi mai kula.
Kuna iya haɗa firikwensin zafin jiki na waje zuwa mai kula da EU-LX WiFi (mai haɗawa a cikin mai sarrafawa- Ƙarin firikwensin 1), wanda ke ba ku damar kunna ikon sarrafa yanayi, ta:

• Zaɓin Sensor - Kuna iya zaɓar ko dai na'urar firikwensin waya ta NTC ko firikwensin mara waya ta C-8zr. Firikwensin mara waya yana buƙatar rajista.
• Calibration - Ana yin gyare-gyare a lokacin shigarwa ko bayan dogon amfani da firikwensin idan zafin da aka auna ta firikwensin ya bambanta daga ainihin zafin jiki. Matsakaicin daidaitawa yana daga -10°C zuwa +10°C tare da mataki na 0.1°C.

A cikin yanayin firikwensin mara waya, sigogin da ke biyo baya suna da alaƙa da kewayo da matakin baturi.

RUWAN DUFA
Ayyuka don hana masu kunnawa kunnawa a ƙayyadaddun tazarar lokaci.

• Saitunan kwanan wata
  • Kashe dumama - Sanya ranar da za a kashe dumama
  • Kunna dumama - saita kwanan wata daga abin da za a kunna dumama
• Ikon yanayi - Lokacin da aka haɗa firikwensin waje, babban allon zai nuna zafin jiki na waje kuma menu mai sarrafawa zai nuna matsakaicin zafin jiki na waje.
  Ayyukan da ke dogara da zafin jiki na waje yana ba da damar ƙayyade ma'anar zafin jiki, wanda zai yi aiki bisa ga iyakar zafin jiki. Idan matsakaicin zafin jiki ya wuce ƙayyadadden madaidaicin zafin jiki, mai sarrafawa zai kashe dumama yankin da aikin sarrafa yanayi ke aiki.
• Kunnawa - don amfani da sarrafa yanayin, dole ne a kunna firikwensin da aka zaɓa.
• Matsakaicin lokaci - mai amfani yana saita lokaci akan abin da za a ƙididdige ma'anar zafin jiki na waje. Kewayon saitin yana daga 6 zuwa 24 hours.
• Matsakaicin zafin jiki - wannan aiki ne na karewa daga ɗumamar dumama yankin da aka bayar. Yankin da aka kunna sarrafa yanayin za a toshe shi daga zazzaɓi idan ma'aunin zafin rana na waje ya wuce yanayin zafin da aka saita. Don misaliampHar ila yau, lokacin da yanayin zafi ya tashi a cikin bazara, mai sarrafawa zai toshe dumama dakin da ba dole ba.
• Matsakaicin zafin jiki na waje - ƙimar zafin jiki da aka ƙididdige shi akan Matsakaicin lokacin.

LAMBAR KYAU-KYAUTA
Mai kula da WiFi na EU-LX zai kunna lambar sadarwar da ba ta da kyauta (bayan kirga lokacin jinkirta) lokacin da kowane yanki bai kai ga yanayin da aka saita ba (dumi - lokacin da yankin ke da zafi, sanyaya - lokacin da zazzabi a yankin ya kasance. mai girma). Mai sarrafawa yana kashe lambar sadarwa da zarar an kai saitin zafin jiki.

• Jinkirin aiki - aikin yana bawa mai amfani damar saita lokacin jinkiri na kunnawa mai yuwuwar lambar sadarwar kyauta bayan yanayin zafi ya faɗi ƙasa da yanayin zafin da aka saita a kowane yanki.

PUMP
Mai kula da EU-LX WiFi yana sarrafa aikin famfo - yana kunna famfo (bayan ƙidayar lokacin jinkiri) lokacin da kowane yanki ya cika zafi kuma lokacin da aka kunna zaɓin famfo na bene a cikin yankin. Lokacin da duk yankuna suka yi zafi (aka saita yanayin zafin jiki), mai sarrafawa yana kashe famfo.

• Jinkirin aiki - aikin yana bawa mai amfani damar saita lokacin jinkiri na kunna famfo bayan yanayin zafi ya faɗi ƙasa da yanayin da aka saita a kowane yanki. Ana amfani da jinkirin kunna famfo don ƙyale mai kunna bawul ya buɗe.

DUMI-DUMINSU - SANYI
Ayyukan yana ba ku damar zaɓar yanayin aiki:

• Dumama - duk yankuna suna zafi
• Cooling - duk yankuna suna sanyaya
• Atomatik - mai sarrafawa yana canza yanayin tsakanin dumama da sanyaya dangane da shigarwar jihohi biyu.

KAYAN TSAYA TSAYA
Wannan aikin yana tilasta aiki na famfo da bawuloli (duba zaɓi na farko), wanda ke hana ma'auni adibas a lokacin tsawon rashin aiki na famfo da bawuloli, misali a waje da lokacin dumama. Idan an kunna wannan aikin, famfo da bawuloli za su kunna don saita lokaci kuma tare da ƙayyadadden tazara (misali kowane kwanaki 10 na mintuna 5).

MAFI TSINCI
Idan yanayin zafi na yanzu ya fi girma da matsakaicin zafi da aka saita, za a cire haɗin sanyaya na yankin.

HANKALI
Aikin yana aiki ne kawai a yanayin sanyaya, in dai an yi rajistar firikwensin da ke da ma'aunin zafi a yankin.

HARSHE
Ayyukan yana ba ku damar canza sigar harshe mai sarrafawa.

BATSA KONA
Yanayin sadaukarwa don shigarwa yana aiki tare da famfo mai zafi, yana ba da damar yin amfani da mafi kyawun damarsa.

• Yanayin adana makamashi - ticking zaɓi zai fara yanayin kuma ƙarin zaɓuɓɓuka zasu bayyana.
• Mafi ƙarancin lokacin dakatarwa - ma'auni mai iyakance adadin maɓalli, wanda ke ba da damar tsawaita rayuwar kwampreso. Ba tare da la'akari da buƙatar sake yin zafi da yankin da aka ba ba, compressor zai fara ne kawai bayan lokacin da aka ƙidaya daga ƙarshen aikin da ya gabata ya wuce.
• Kewaya - zaɓin da ake buƙata idan babu buffer, samar da famfo mai zafi tare da ƙarfin zafi mai dacewa. Ya dogara da jeri-jere na buɗe yankuna masu zuwa a kowane ƙayyadadden lokaci.
  • Famfon bene – kunna/kashe famfon bene
  • Lokacin zagayowar – lokacin da za a buɗe yankin da aka zaɓa dominsa.

SIFFOFIN FARKO

Ayyukan yana ba ku damar komawa zuwa saitunan menu na fitter da mai ƙira ya adana.

MENU na HIDIMAR
Menu ɗin sabis na direba yana samuwa ga mutane masu izini kawai kuma ana kiyaye shi ta lambar mallakar Tech Sterowniki.

SIFFOFIN FARKO
Ayyukan yana ba ku damar komawa zuwa saitunan tsoho na mai sarrafawa, kamar yadda mai ƙira ya bayyana.

SHARHIN SOFTWARE
Lokacin da aka kunna wannan zaɓi, tambarin masana'anta zai bayyana akan nuni, tare da lambar sigar software mai sarrafawa. Ana buƙatar sake fasalin software lokacin tuntuɓar sabis na Tech Sterowniki.

LISSAFIN KARARRAWA

SOFTWARE GASKIYA

Don loda sabuwar software, cire haɗin mai sarrafawa daga hanyar sadarwa. Saka kebul na filasha mai dauke da sabuwar software a cikin tashar USB. Sa'an nan haɗa mai sarrafawa zuwa cibiyar sadarwa yayin da kake riƙe da maɓallin EXIT. Riƙe maɓallin EXIT har sai kun ji ƙara guda ɗaya yana alamar fara loda sabon software. Da zarar an gama aikin, mai sarrafawa zai sake farawa da kansa.

HANKALI

• Tsarin loda sabbin software zuwa mai sarrafawa na iya aiwatar da shi ta hanyar ƙwararren mai sakawa. Bayan canza software, ba zai yiwu a mayar da saitunan da suka gabata ba.
• Kar a kashe mai sarrafawa yayin sabunta software.

DATA FASAHA

• AC1 load category: guda-lokaci, resistive ko dan kadan inductive AC load.
• DC1 load category: kai tsaye halin yanzu, resistive ko dan kadan inductive load.

SANARWA TA EU NA DACEWA

Ta haka, muna ayyana ƙarƙashin alhakinmu kaɗai cewa EU-LX WiFi ta TECH STEROWNIKI II Sp. z oo, wanda ke da hedkwata a Wieprz Biała Droga 31, 34-122 Wieprz, ya bi umarnin 2014/53/EU na Majalisar Tarayyar Turai da na Majalisar 16 Afrilu 2014 kan daidaita dokokin Membobin Kasashe da suka shafi Samar da samuwa a kasuwannin kayan aikin rediyo, Jagoran 2009/125/EC da ke kafa tsari don saita buƙatun ecodesign don samfuran da ke da alaƙa da makamashi da kuma ka'idojin da Ma'aikatar Harkokin Kasuwanci da Fasaha ta 24 ga Yuni 2019 da ke gyara ƙa'idar. Abubuwan da ake buƙata masu mahimmanci dangane da ƙuntatawa na amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da lantarki, aiwatar da tanadi na Umarni (EU) 2017/2102 na Majalisar Turai da na Majalisar 15 Nuwamba 2017 gyara Umarnin 2011/65/EU kan ƙuntatawa na amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da na lantarki (OJ L 305, 21.11.2017, shafi 8).
Don kimanta yarda, an yi amfani da ma'auni masu jituwa:

• PN-EN IEC 60730-2-9: 2019-06 art. 3.1a Amintaccen amfani
• PN-EN IEC 62368-1: 2020-11 art. 3.1 Amintaccen amfani
• PN-EN 62479: 2011 art. 3.1 Amintaccen amfani
• TS EN 301 489-1 V2.2.3 (2019-11) art.3.1b Daidaitawa na lantarki
• TS EN 301 489-3 V2.1.1 (2019-03) art.3.1 b Daidaitawar lantarki
• TS EN 301 489-17 V3.2.4 (2020-09) art.3.1b Daidaitawa na lantarki
• ETSI EN 300 328 V2.2.2 (2019-07) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
• ETSI EN 300 220-2 V3.2.1 (2018-06) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
• ETSI EN 300 220-1 V3.1.1 (2017-02) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
• EN IEC 63000: 2018 RoHS

Babban hedkwatar
ul. Biata Droga 31, 34-122 Wieprz

Sabis
ul. Skotnica 120, 32-652 Bulowice

• waya: +48 33 875 93 80
• e-mail: serwis@techsterowniki.pl
• www.tech-controllers.com

Takardu / Albarkatu

FASAHA MASU SARKI EU-LX Mai Kula da Filayen Gishiri [pdf] Manual mai amfani EU-LX, EU-LX WiFi Mai Kula da Filayen Filayen Filaye, Mai Kula da Filayen Filayen Filaye, Mai Sarrafa Filayen Filaye, Mai Sarrafawa, Mai Sarrafawa

Magana

• Manual mai amfani