Sharp Micro Bangaren Tsarin Umarni na Manhaja

 

 

Na'urorin haɗi

Da fatan za a tabbatar cewa an haɗa waɗannan kayan haɗi masu zuwa kawai

1. Nesa nesa x 1 (RRMCGA415AWSA)
   
2. AM er madaidaicin eriya x 1 (QANTLA016AW01)
   
3. Eriya eriya x 1 (92LFANT1535A)
   

Bayani na Musamman

Samun wannan samfurin baya isar da lasisi ko kuma yana nuna wani haƙƙin rarraba abun da aka ƙirƙira tare da wannan samfurin a cikin tsarin watsa shirye-shiryen samun kuɗaɗen shiga (ƙasa, tauraron dan adam, kebul da / ko wasu tashoshin rarrabawa), samar da kuɗaɗen shiga aikace-aikacen gudana (ta hanyar Intanet, intanet da / ko wasu hanyoyin sadarwar), sauran hanyoyin rarraba kudaden shiga (tsarin biyan kudi ko aikace-aikacen mai ji da sauti da makamantansu) ko kuma ta hanyar hanyoyin samun kudaden shiga ta hanyar sadarwa (karamin faya-fayai, faya-fayai masu amfani da dijital, kwakwalwan semiconductor, rumbun kwamfutoci, ƙwaƙwalwa katuna da makamantansu). Ana buƙatar lasisi mai zaman kansa don irin wannan amfani. Don cikakkun bayanai, don Allah ziyarci http://mp3licensing.com MPEG Layer-3 fasahar lambar sauti mai lasisi daga Fraunhofer IIS da Thomson.

BAYANI NA MUSAMMAN

Ga masu amfani a Amurka

HANKALI: DOMIN RAGE HADARIN HUKUNCIN LANTARKI, KAR KU CIYAR DA RUFE (KO BAYA). BABU BANGAREN HIDIMAR ACIKIN CIKI. NUNA HIDIMAR GA CANCANTAR MUTUM HIDIMAR.
 Bayanin Alamomin Zane:
Walƙiya mai walƙiya tare da alamar kibiya, a cikin madaidaicin alwatika, an yi niyya ne don faɗakar da mai amfani da kasancewar “mutum mai haɗari” wanda ba a rufe shi ba.tage” a cikin shingen samfurin wanda zai iya zama isashen girma don zama haɗarin girgizar lantarki ga mutane.
Wurin faɗakarwa a cikin madaidaicin alwatika an yi niyya don faɗakar da mai amfani game da kasancewar mahimman umarni na aiki da kiyayewa (sabis) a cikin wallafe-wallafen da ke tare da na'urar.

GARGADI:
DOMIN RAGE HADAR WUTA KO WUTA, KAR KA BADA WANNAN NUFI GA RUWAN RUWAN RUWAN KWANA KO DANSHI.

An tsara wannan samfurin azaman KASADA 1 LASARI PRODUCT PRODUCT - Amfani da kowane sarrafawa, gyare-gyare ko hanyoyin wanin waɗanda aka ambata anan zasu iya haifar da fitowar radiation mai haɗari.

Note:- 

An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma ana amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Gargadi: Canje-canje ko gyare-gyare ga wannan naúrar da ƙungiyar da ke da alhakin aiwatarwa ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.

Bayanin Bayyanar Radiation FCC

Wannan na'urar tana bin ƙa'idodi don na'urar dijital Class B, bisa ga Sashe na 15 na Dokokin FCC. Dole ne ya zama yana kasancewa tare ko aiki tare tare da kowane eriya ko watsawa. Yin aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

Ya kamata a girka wannan kayan aikin da aiki tare da mafi ƙarancin tazara 20 cm tsakanin radiator da jikin mutum.

Bayanin Bayyanar Radiation na IC (Ga Masu Amfani A Kanada)
Wannan kayan aikin dijital B ɗin yana biye da ƙididdigar Class IC na Kanada ICES-003. Wannan na'urar ta bi ka'idodin RSS na lasisin masana'antu na Canada. Yin aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama ba, kuma
2. Dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.

Ya kamata a girka wannan kayan aikin da aiki tare da mafi ƙarancin tazara 20 cm tsakanin radiator da jikin mutum.
Bayani ga mai saka tsarin CATV:
An ba da wannan tunatarwar don kiran hankalin mai sakawa na CATV ga Mataki na 820 na Dokar Wutar Lantarki ta Nationalasa wanda ke ba da jagororin yadda za a kafa ƙasa kuma, musamman, ya keɓe cewa za a haɗa kebul ɗin ƙasa da tsarin ginin ƙasa, kusa da ma'anar shigarwar USB azaman mai amfani.

GA RUBUTUN KU

Don taimakon ku a cikin rahoton wannan ƙungiyar idan asarar ko sata ce, da fatan za a yi rikodin a ƙasa da lambar ƙirar da lambar siriya waɗanda suke a bayan naúrar. Da fatan za a riƙe wannan bayanin.

Lambar samfurin …………………………
Lambar lamba …………………………
Ranar saye …………………………
Wurin saye …………………………

Alamar kalmar Bluetooth® da tambura alamun kasuwanci ne masu rijista mallakar Bluetooth SIG, Inc. kuma duk wani amfani da waɗannan alamun ta SHARP yana ƙarƙashin lasisi. Sauran alamun kasuwanci da sunayen kasuwanci sune na masu mallakar su.

MUHIMMAN UMURNIN TSIRA

Ana amfani da wutar lantarki don yin ayyuka masu amfani da yawa, amma kuma yana iya haifar da raunin mutum da lalacewar dukiya idan ba ayi aiki dasu da kyau ba. An ƙera wannan samfurin kuma an ƙirƙira shi da fifiko mafi girma akan aminci. Koyaya, amfani mara kyau na iya haifar da girgizar lantarki da / ko wuta. Don kiyaye haɗarin haɗari, da fatan za a bi umarnin nan masu zuwa yayin girkawa, aiki da tsabtace samfurin. Don tabbatar da lafiyarka da tsawanta rayuwar rayuwar wannan samfurin, da fatan za a karanta waɗannan matakan kiyayewa a hankali kafin amfani.

1. Karanta waɗannan umarnin.
2. A kiyaye waɗannan umarnin.
3. Ku kula da duk gargaɗin.
4. Bi duk umarnin.
5. Kar a yi amfani da wannan na'urar kusa da ruwa.
6. Tsaftace kawai da bushe bushe.
7. Kada a toshe kowane buɗewar samun iska. Shigar daidai da umarnin masana'anta.
8. Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu, ko wasu na'urori (ciki har da amplifiers) masu samar da zafi.
9. Kar a kayar da manufar aminci na filogi mai nau'in polarized ko ƙasa. Filogi na polarized yana da ruwan wukake guda biyu tare da fiɗa ɗaya fiye da ɗayan. Nau'in filogi na ƙasa yana da ruwan wukake biyu da na ƙasa na uku. An tanadar da faffadan ruwa ko na uku don amincin ku. Idan filogin da aka bayar bai dace da mashin ɗin ku ba, tuntuɓi ma'aikacin wutar lantarki don maye gurbin mabuɗin da aka daina amfani da shi.
10. Kare igiyar wutar lantarki daga tafiya a kai ko a danne su musamman a matosai, madaidaitan ma'auni, da wurin da suke fita daga na'urar.
11. Yi amfani da haɗe-haɗe-haɗe-haɗe/na'urorin haɗi kawai da mai ƙira ya ƙayyade.
12. Yi amfani kawai tare da keken keke, tsayawa, tudu, sashi, ko tebur wanda masana'anta suka ƙayyade, ko sayar da na'ura. Lokacin da ake amfani da keken keke, yi amfani da taka tsantsan lokacin motsi haɗin keke/kayan don guje wa rauni daga faɗuwa.
13. Cire wannan na'urar yayin guguwar walƙiya ko lokacin da ba a yi amfani da ita na dogon lokaci ba.
14. Koma duk hidima ga ƙwararrun ma'aikatan sabis. Ana buƙatar sabis lokacin da na'urar ta lalace ta kowace hanya, kamar igiyar samar da wutar lantarki ko toshe ta lalace, ruwa ya zube ko abubuwa sun fada cikin na'urar, na'urar ta fallasa ruwan sama ko danshi, ba ya aiki yadda ya kamata. , ko kuma an jefar da shi.
    Ƙarin Bayanin Tsaro
15. Tushen Wuta - Ya kamata a sarrafa wannan samfurin kawai daga nau'in tushen wutar da aka nuna akan alamar alamar. Idan bakada tabbas game da nau'in wutar lantarki zuwa gidanka, tuntuɓi dillalin samfurinka ko kamfanin wutar lantarki na gida. Don samfurin da aka yi niyya don aiki daga ƙarfin baturi, ko wasu tushe, koma zuwa umarnin aiki.
16. Yin kiba – Kar a yi lodin kantunan bango, igiyoyin tsawaitawa, ko ma'auni masu dacewa saboda wannan na iya haifar da haɗarin wuta ko girgiza wutar lantarki.
17. Abu da Shigar Ruwa - Kada a taɓa tura abubuwa kowane iri cikin wannan samfur ta hanyar buɗewa saboda suna iya taɓa volts mai haɗari.tage maki ko gajerun sassa waɗanda zasu iya haifar da gobara ko girgizar lantarki. Don hana haɗarin wuta ko haɗarin girgiza, kar a bijirar da wannan kayan don ɗigawa ko fesawa. Ba za a sanya abubuwan da ke cike da ruwa ba, kamar vases, akan na'urar.
18. Sabis da Ke Bukatar Lalacewa - Cire wannan samfurin daga mashigar bango kuma miƙa sabis ga ƙwararrun ma'aikatan sabis ƙarƙashin waɗannan yanayi: a. Lokacin da igiyar AC ko toshe ta lalace, b. Idan ruwa ya zube, ko abubuwa sun faɗi cikin samfurin, c. Idan samfurin ya kasance yana fuskantar ruwan sama ko ruwa, d. Idan samfur ɗin baya aiki kwatankwacin bin umarnin aiki. Daidaita waɗancan sarrafawa waɗanda umarnin aiki ke rufe su azaman daidaitawa mara kyau na sauran sarrafawa na iya haifar da lalacewa kuma galibi zai buƙaci aiki mai yawa daga ƙwararren masani don dawo da samfurin zuwa aikinsa na yau da kullun, e. Idan samfurin ya fadi ko lalace ta kowace hanya, kuma f. Lokacin da samfurin ya nuna wani canji na musamman a aikinsa yana nuna buƙatar sabis.
19. ɓangarorin Maye gurbin – Lokacin da ake buƙatar ɓangarori masu sauyawa, tabbatar da ƙwararren sabis ɗin ya yi amfani da ɓangarorin maye gurbin da masana'anta suka kayyade ko suna da halaye iri ɗaya da ɓangaren asali. Sauye-sauye mara izini na iya haifar da wuta, girgiza wutar lantarki, ko wasu haɗari.
20. Duban Tsaro - Bayan kammala kowane sabis ko gyare-gyare ga wannan samfur, tambayi ma'aikacin sabis ya yi binciken aminci don sanin cewa samfurin yana cikin yanayin aiki mai kyau.
21. Bango ko hawa rufi - Lokacin hawa samfur ɗin a bango ko rufi, tabbatar da shigar da samfurin gwargwadon tsarin masana'antar.
22. Layin Wuta - Tsarin eriya a waje bai kamata ya kasance kusa da layukan wutar sama ko wani hasken lantarki ko da'irorin wuta ba, ko kuma inda zai iya fadawa cikin irin waɗannan layukan wutar ko kuma ta hanyar zagaye. Lokacin shigar da eriyar eriya ta waje, ya kamata a kula sosai don kiyaye taɓa irin waɗannan layukan wutar ko da'irorin yayin da tuntuɓar su na iya zama na mutuwa.
23. Toshe Mai Makala Mai kariya - Samfurin yana sanye da toshe abin da aka makala tare da kariya mai yawa. Wannan yanayin aminci ne. Duba Littafin Jagora don sauyawa ko sake saiti na na'urar kariya. Idan ana buƙatar maye gurbin toshe, tabbata cewa ma'aikacin sabis ya yi amfani da fulogin maye gurbin da mai ƙira ya fayyace wanda ke da kariya iri iri iri kamar asalin fulogi.
24. Tsaya - Kada ka sanya samfurin a kan keken da ba shi da ƙarfi, tsayawa, mai tafiya ko tebur. Sanya samfurin a kan tushe mara ƙarfi na iya haifar da faɗuwar samfurin, wanda ke haifar da mummunan rauni na mutum da lalacewar samfurin. Yi amfani da amalanke kawai, tsayawa, mai tafiya uku, takalmin gyaran kafa ko tebur da masana'anta suka ba da shawarar ko aka sayar tare da samfurin. Lokacin hawa samfurin a bango, tabbatar da bin umarnin masana'antun. Yi amfani da kayan haɗin hawa kawai waɗanda masana'anta suka ba da shawarar.

Matakan kariya

Gabaɗaya

• Da fatan za a tabbatar cewa an sanya kayan aikin a wuri mai iska mai kyau kuma a tabbatar akwai aƙalla 6 ″ (15 cm) na sarari kyauta tare da ɓangarorin, sama da baya na kayan aikin.
  
• Yi amfani da naúrar akan tsayayyen matakin ƙasa mara fa'ida.
• Sanya naúrar aƙalla 12 ″ (30 cm) nesa da kowane gidan TV na CRT don gujewa bambancin launi a duk faɗin TV. Idan bambancin ya ci gaba, matsar da naúrar nesa da TV. LCD TV ba ta da saurin irin wannan bambancin.
• Kiyaye naúrar daga hasken rana kai tsaye, filayen maganadisu masu ƙarfi, ƙura mai wuce gona da iri, ɗanshi da kayan lantarki / lantarki (kwamfutocin gida, facsimiles, da sauransu) waɗanda ke haifar da karar lantarki.
• Kar a sanya komai a saman naúrar.
• Kada a bijirar da naurar zuwa danshi, zuwa yanayin zafi sama da 140 ° F (60 ° C) ko zuwa yanayin ƙarancin yanayi.
• Idan tsarinka baya aiki yadda yakamata, cire haɗin igiyar wutar AC daga mashigar AC. Toshe igiyar wutar AC ta dawo, sannan kunna tsarinka.
• Idan akwai wata guguwar lantarki, toshe na'urar don aminci.
• Riƙe filogin wutar AC da kai yayin cire shi daga mashin AC, saboda jan igiyar na iya lalata wayoyin ciki.
• Ana amfani da toshe wutar AC azaman na'urar cire haɗin na'urar kuma koyaushe zata kasance mai aiki.
• Kar a cire murfin na waje, saboda wannan na iya haifar da girgiza lantarki. Duba sabis na ciki zuwa wurin sabis na SHARP na gida.
• Ya kamata a yi amfani da wannan ƙungiyar kawai tsakanin kewayon 41 ° F - 95 ° F (5 ° C - 35 ° C).

Gargadi:
Voltage amfani dole ne yayi daidai da wanda aka ƙayyade akan wannan rukunin. Amfani da wannan samfurin tare da ƙarar girmatage wanin abin da aka kayyade yana da haɗari kuma yana iya haifar da wuta ko wani nau'in hatsari da ke haifar da lalacewa. SHARP ba za a ɗauki alhakin duk wata lalacewar da ta haifar da amfani da wannan naúrar tare da ƙarartage wanin abin da aka kayyade.

Sarrafa ƙara
Matakan sauti a saitin ƙara da aka ba ya dogara da ingancin lasifika, wuri da wasu dalilai daban-daban. Yana da kyau ka guji ɗaukar hotuna zuwa matakan girma, wanda ke faruwa yayin kunna naúrar tare da sarrafa ƙarar da ke saita sama, ko yayin ci gaba da saurara a babban juzu'i. Matsanancin ƙarfi daga sautin kunne da belun kunne na iya haifar da rashin ji.

Don abokin cinikin Amurka kawai

GARANTI MAI KYAUTA MAI KYAUTA

MIZARI ENTERPRISES, INC. Ta yiwa mai siya na farko garantin cewa wannan samfurin samfurin Sharp ("Samfuran"), lokacin da aka shigo dashi cikin ainihin akwatinsa, zai sami 'yanci daga aiki da kayan aiki mara kyau, kuma ya yarda cewa zai, a zaɓinsa, ko dai gyara nakasa ko maye gurbin samfur mai lahani ko sashinta da sabon ko sake sake fasalinsa kwata-kwata ba caji ga mai siye sassa ko aiki na lokacin (s) da aka bayyana a ƙasa.
Wannan garanti bai shafi kowane bayyanar samfur ba ko ga ƙarin abubuwan da aka keɓe da aka bayyana a ƙasa ko ga kowane samfur na waje wanda ya lalace ko ya ɓata, wanda aka yi wa mugun ƙarar.tage ko wani rashin amfani, rashin aikin yi ko kulawa, ko wanda aka canza ko aka gyara a ƙira ko gini.
Don aiwatar da haƙƙoƙi a ƙarƙashin wannan iyakantaccen garanti, mai siye ya kamata ya bi matakan da aka shimfiɗa a ƙasa kuma ya ba da tabbacin sayan ga mai hidimar.
Iyakantaccen garanti da aka bayyana a ciki ban da kowane garanti da doka za ta ba wa masu siye. DUKKANIN WASU GARANTI DA SUKA HADA DA GARANTIN SAMUN KYAUTA DA KYAUTA A SAMU A HANYAR LOKACI (S) DAGA SAMUN SAYAR DA AKA SAYO A KASASU. Wasu jihohi basa bada izinin iyakan tsawon lokacin garanti da aka bayyana, saboda haka iyakancewar da ke sama bazai shafi ku ba.
Babu ma'aikatan sayar da mai siyarwa ko wani mutum da yake da izinin yin wasu garantin banda wadanda aka bayyana a nan, ko kuma tsawaita lokacin kowane garanti sama da lokacin da aka bayyana a nan a madadin MIZARI.
Garanti da aka bayyana a ciki zasu kasance tabbatattu kuma garanti na musamman wanda MIZARI ya bayar kuma zai zama shi kadai ne kuma keɓaɓɓen magani ga mai siye. Gyara aibi, a cikin tsari da kuma lokacin da aka bayyana a nan, zai zama cikakkiyar cikakkiyar cika dukkan nauyi da nauyi na MIZARI ga mai siye dangane da Kayan, kuma ya zama cikakkiyar gamsuwa ga duk iƙirari, ko bisa kwangila, sakaci, ɗaukar nauyi mai nauyi ko akasin haka. Babu wani dalilin da zai sa MIZARI ya zama abin dogaro, ko ta wata hanya ce ta alhaki, ga duk wata lahani ko lahani a cikin Samfurin wanda ya samo asali ne daga gyara ko yunƙurin gyara da wani ya yi ban da mai hidimar izini. Hakanan MIZARI bazai zama mai dogaro ko ta wata hanyar da za ta iya haifar da wani abin da ya faru ko ya haifar da lalacewar tattalin arziki ko dukiya. Wasu jihohi ba su ba da izinin keɓance na ɓarna ko na sakamako, don haka keɓancewar da ke sama ba za ta shafe ku ba.
WANNAN GASKIYAR GASKIYA TANA INGANTA KADAI DAGA KASASHE DUNIYA (50) UNITED, DISTRICT OF COLUMBIA DA PUERTO Rico.

Misali Sashi Na Musamman
Lambar Samfurin ku na Samfura & Bayani:
Lokacin Garanti na wannan Samfurin: Itarin Abubuwa (s) Banda daga rantaukar Garantin Garanti (idan akwai):

CD-BH20 MICRO HANYAR HADADDE
(Tabbatar da samun wannan bayanin lokacin da kake buƙatar sabis don Samfur naka.) Partsangarorin shekara ɗaya (1) da aiki daga ranar siye.
Na'urorin haɗi, kayayyaki, da abubuwan amfani.
Kira Sharp kyauta a 1-800-BE-SHARP

Abin da za a yi don Sami Sabis:

DOMIN SAMUN SIFFOFI, KAYAN KYAUTA KO BAYANAI NA MAGANA, KIRA 1-800-BE-SHARP
SHARP alamun kasuwanci ne masu rijista na SHARP CORPORATION; wanda aka yi amfani da shi a ƙarƙashin lasisi ta kamfanin SHARP MARKETED BY: MIZARI INTERPISES, INC. 5455 WILSHIRE BOULEVARD, SUITE 1410, LOS ANGELES, CA 90036

Sarrafa da alamomi

Kwamitin Gaba

1. Mai nuna lokaci
2. Sensor Nesa
3. Tray Disc
4. Alamar Hanyar Kunnen Kai
5. Kakakin Hagu
6. Tashar USB
7. Jackphone na kunne
8. MAGANAR / TSAYA
9. Audio A cikin Jack
10. Maballin shigarwa
11. Maɓallin Haɗin Haɗin Bluetooth
12. CD / USB Dakatar da Button
13. Tuner Saiti Down, Canza Auto, CD / USB / Bluetooth Tsallake Button
14. Disc / USB / Bluetooth Play ko Dakatar da Button
15. Tuner Saiti Up, Auto Tuning Up, CD /
16. Kebul / Bluetooth Tsallake Button 16. Sarrafa ƙarar
17. Disc Tray Buɗe / Rufe Button
18. Dama Kakakin

Rear Panel

1. FM 75 Ohms Antenna Jack
2. AM Madauki Antenna Terminal
3. Tashar jirgin ruwa
4. AC Power Igiyar

Ikon nesa

1. Mai Gudanarwa Na Nesa
2. Kunnawa / Maɓallin Jiran aiki
3. Bluetooth Play / Dakatar da Button
4. USB Kunna / Dakatar da Button
5. Maballin Haɗawa
6. CD / USB Dakatar da Button
7. Maɓallin Dimmer
8. Maballin Nuni
9. Maɓallin agogo
10. Maɓallin Saitunan Wuta
11. Madannin Jaka
12. Gyara Down, Tsallaka Kasa, Saurin Baya, Lokaci Kasa
13. Maɓalli
14. Bakin Saiti Down Button
15. Maɓallin Eco
16. Maballin Ƙwaƙwalwa
17. Maɓallin Treble
18. Maballin Bass 18. Sauti (Tsoffin) Button
19. Button Mahaɗin Maɓallin Kai
20. Bude / Rufe Button
21. CD Kunna / Dakatar da Button
22. Maballin [BAND]
23. Bututun odiyo / layi (Input)
24. Maɓallin Mai ƙidayar lokaci
25. Maballin Barci
26. Kunna Maɓallin Yanayin
27. Gyara Up, Tsallake Up, Fast Forward, Button Up Button
28. Shigar da Maballin
29. Maɓallin shiru
30. Share Button
31. Button Maɓallin Upara
32. Juz'i na ƙasa Button

Nunawa

1. USB Nuna alama
2. Alamar CD
3. Alamar MP3
4. Alamar RDM (Random)
5. MEM (Memory) Mai Nunawa
6. Maimaita Nuni
7. Kunna / Dakatar da Alamar
8. Tunatar da Alamar halin FM / Bluetooth
9. Alamar Yanayin sitiriyo na FM
10. Alamar Tashar sitiriyo
11. Alamar Muting
12. Alamar take
13. Mai Nuna Artist
14. Alamar Jaka
15. Alamar Kida
16. File Mai nuna alama
17. Alamar waƙa
18. Mai nuna alama na yau da kullun
19. Da zarar Mai Nuna Alamar
20. Mai nuna Disc
21. Total Nuna alama
22. Alamar Barci

Haɗin tsarin

Tabbatar cire akwatin igiyar wutar AC kafin yin kowane haɗi.

Layi A Haɗuwa
Haɗa zuwa TV ta amfani da kebul na odiyo.

Don zaɓar Layi A cikin aiki:

• A kan babban naúra: Latsa maɓallin shigar da sau da yawa har sai Line In ya fito.
• A kan ramut ɗin nesa: Latsa maɓallin AUDIO / LINE (INPUT) akai-akai har sai Line In ya nuna.

Haɗin Antenna
An kawata Antenna FM:
Haɗa zuwa jack 75 ohms jack kuma sanya shi a inda liyafar ta fi kyau.
Eriya FM ta waje:
Yi amfani da eriyar FM ta waje (75 ohms coaxial cable) don kyakkyawan liyafar. Cire haɗin eriyar eriyar FM da aka kawo kafin amfani.
An bayar da AM madauki Eriya:
Haɗa zuwa tashar AM kuma sanya shi a inda liyafar ta fi kyau. Sanya shi a kan shiryayye, da sauransu, ko haɗa shi a tsaye ko bango tare da sukurori (ba a kawo su ba).

Yanayin jiran aiki na Bluetooth

• Lokaci na farko da aka saka naúrar, zai shiga yanayin jiran aiki na Bluetooth. "Bluetooth Stby" ya bayyana akan nuni.
• Don soke yanayin jiran aiki na Bluetooth, latsa maɓallin ECO (madogara) yayin yanayin jiran aiki na wuta.
• Rukunin zai shiga yanayin amfani da ƙananan wuta.
• Don komawa zuwa yanayin jiran aiki na Bluetooth, sake latsa maɓallin ECO.

Haɗin wutar AC

Bayan an gama dukkan hanyoyin daidai, toshe igiyar wutar AC a cikin mashigar AC.
Lura:
Cire igiyar wutar AC daga mashigar AC idan na'urar ba zata yi aiki ba na tsawan lokaci.

Ikon nesa

Shigar da baturi
Yi amfani da batura masu girman "AAA" (UM / SUM-2, R4, HP-3 ko makamancin haka). Ba a haɗa batura ba

1. Bude murfin baturin.
2. Saka batirin bisa ga tashar da aka nuna a sashin baturin. Lokacin saka ko cire batura, tura shi zuwa ga (-) tashoshin baturin.
3. Rufe murfin.
   

Tsanaki:

• Sauya duk tsoffin batura da sababbi a lokaci guda.
• Kar a haxa tsofaffi da sababbin batura.
• Cire batura idan ba'a amfani da naúrar na dogon lokaci. Wannan zai hana yuwuwar lalacewa saboda zubewar batir.
• Kada ayi amfani da batura masu caji (batirin nickel-cadmium, da sauransu).
• Sanya batura cikin kuskure na iya haifar da naúrar aiki.
• Batura (fakitin baturi ko shigar batura) ba za su iya fuskantar zafi mai yawa kamar hasken rana, wuta ko makamancin haka ba.

Bayanan kula game da amfani:

• Sauya batura idan nisan aiki ya ragu ko kuma idan aikin ya zama mara kyau. Sayi 2 "AAA" girma
  batura. (UM / SUM-4, R3, HP-16 ko makamancin haka)
• Lokaci-lokaci tsabtace mai watsawa a kan ramut da firikwensin da ke kan naúrar tare da zane mai laushi.
• Bayyana firikwensin firikwensin a kan naúrar zuwa haske mai ƙarfi na iya tsoma baki tare da aiki. Canja hasken wuta ko alkiblar naúrar idan hakan ta faru.
• Kiyaye ramut daga danshi, zafi, firgita, da rawar jiki.

Gwajin ramut
Ana iya amfani da ikon nesa a tsakanin zangon da aka nuna a ƙasa.

Janar Control

Don kunna wutar
Danna maɓallin (KUNNA / TSAYA) button don kunna ko kashe wutar.
Nuna ikon haske
Latsa maɓallin DIMMER (maɓallin nesa).

Aramar ɓoyayyiyar mota ta atomatik
Idan ka kashe kuma a kan babban naúra tare da saitin da aka saita zuwa 27 ko sama da haka, ƙarar tana farawa daga 15 kuma zata shuɗe zuwa matakin saiti na ƙarshe.
Sarrafa ƙara
Juya murfin ƙara zuwa VOL +/- (babban sashi) ko latsa VOL +/-- (madogara ta nesa) don ƙarawa ko rage ƙarar.
Mutuwa
Don kashe ƙarar, latsa maɓallin (kulawar nesa). Latsa sake don dawo da restorearar.
Kai tsaye madannin wuta akan aiki
Lokacin da kuka danna kowane maɓallin mai zuwa, naúrar tana kunne.

• CD , Kebul  , BLUETOOTH , AUDIO / LINE (INPUT),
• TUNER [BAND]: An zaɓi aikin da aka zaɓa.
• (babban sashi): Naúrar tana kunnawa kuma sake kunnawa aikin ƙarshe zai fara (CD, USB, BLUETOOTH, AUDIO IN, LINE IN, TUNER)
• (OPEN / CLOSE) (akan babbar naúrar / ramut): Disc tray tray ya buɗe kuma aikin da aka zaɓa na ƙarshe ya kunna

Aikin kashe wutar lantarki ta atomatik
Babban naúrar zai shiga yanayin jiran aiki bayan kimanin mintuna 15 na rashin aiki yayin:
Audio A / Layi A Cikin: Babu gano siginar shigar da bayanai.
CD: A yanayin tsayawa ko babu faifai.
USB: A cikin yanayin tsayawa ko babu kafofin watsa labarai.
Bluetooth: - Babu haɗin bayan kimanin minti 15.
- A cikin dakatarwa ko yanayin tsayawa kuma babu sigina mai shigowa daga na'urar bayan kimanin minti 15.
Bass ko Treble sarrafawa

1. Latsa maballin BASS ko TREBLE don zaɓar “Bass” ko “Treble” bi da bi.
2. A tsakanin sakan 5, danna maɓallin VOL (+ ko) don daidaita bass ko treble.

Latsa maballin SOUND (DEFAULT) don dawo da sauti zuwa saitunan da aka saba. “SUTUT DEFAULT” ya bayyana akan allon nuni. Saitunan tsoho mai sauti: Bass = 0, Treble = 0

Aiki
Latsa maballin shigar da abu (babban sashi) akai-akai don zaɓar aikin da ake so.

Lura: Aikin ajiyar zai kare yanayin aikin da aka haddace na hoursan awanni idan ya kasance akwai gazawar wuta ko kuma an katse igiyar wutar AC.

Kafa agogo (Nesa kawai ake sarrafawa)

A cikin wannan example, an saita agogo don nuni na awanni 12 (AM 12:00).

1. Danna maɓallin (ON / TSAYA) button don kunna wuta.
2. Latsa maɓallin CLOCK.
3. Tsakanin sakan 10, danna maballin Shigar. Don daidaita ranar, latsa  or maballin sannan danna maɓallin Shigar.
4. Danna maɓallin  or maballin don zaɓar nuni na awa 24 ko awa 12 sannan danna maɓallin Shigar.
   
5. Don daidaita sa'a, latsa or maballin sannan danna maɓallin Shigar. Latsa or maballin sau daya don ciyar da lokaci ta hanyar awa 1. Riƙe shi don ci gaba gaba.
6. Don daidaita minti, latsa or maballin sannan danna maɓallin Shigar. Latsa or maballin sau ɗaya don ciyar da lokaci ta minti 1. Riƙe shi don ci gaba da lokaci tazarar minti 5.

Don tabbatar da lokacin nunawa:
Latsa maɓallin CLOCK. Nunin lokaci zai bayyana na kimanin dakika 10.
Lura:
Lokacin da aka dawo da wutan lantarki bayan naúrar ta sake shiga ko bayan gazawar wuta, sake saita agogo.
Don gyara agogo:
Yi "Kafa agogo" daga mataki na 1.

1. Share duk abubuwan da aka tsara. [Koma zuwa "Sake saitin masana'antu, share dukkan ƙwaƙwalwar ajiya".
2. Yi "Kafa agogo" daga mataki na 1 zuwa gaba.

Sauraron na'urorin da aka kunna Bluetooth

Bluetooth
Fasaha mara waya ta Bluetooth fasaha ce ta gajeren zango wanda ke ba da damar sadarwa ta iska tsakanin nau'ikan na'urorin dijital, kamar wayar hannu ko kwamfuta. Yana aiki a tsakanin kewayon kimanin ƙafa 30 (mita 10) ba tare da wahalar amfani da igiyoyi don haɗa waɗannan na'urori ba.
Wannan rukunin yana tallafawa masu zuwa:
Tsarin Sadarwa: Siffar ƙayyadaddun Bluetooth 2.1 Bluetooth + Ingantaccen Ƙimar Bayanai (EDR). Taimako Profile : A2DP (Advanced Audio Distribution Profile) da AVRCP (Audio/Video Remote Control Profile).

Bayanan kula lokacin amfani da naúra tare da wayar hannu

• Ba za a iya amfani da wannan naúrar don yin magana ta tarho ba ko da kuwa akwai haɗin Bluetooth da aka yi da wayar hannu.
• Da fatan za a koma zuwa littafin aikin da aka kawo tare da wayar hannu don cikakkun bayanai kan aikin wayarku ta hannu yayin watsa sautin ta amfani da haɗin Bluetooth.
  

Na'urorin Bluetooth suna buƙatar fara haɗuwa da farko kafin su iya musayar bayanai. Wannan naúrar na iya haddace har zuwa aƙalla na'urori 20. Da zarar an haɗa su, ba lallai ba ne a sake haɗa su har sai:

• Ana yin haɗin tare da fiye da na'urori 20. Za'a iya yin haɗin guda ɗaya ne kawai a lokaci guda. Idan na'uran na biyu ya haɗu, za'a share tsofaffin abin da aka haɗu kuma a maye gurbinsu da sabo.
• An sake saita wannan naúrar. Ana share duk bayanan haɗin gwiwa lokacin da aka sake saita naúrar.
  

  Mai nuna alama	Sharadi	Halin Bluetooth
  	Haskakawa	An haɗa
  Babu nuni		Ba a haɗa shi ba

Koyaya, ba a nuna halin nuni yayin yanayin jiran aiki na Bluetooth.

Haɗawa tare da na'urorin tushen Bluetooth

1. Danna maɓallin (ON / TSAYA) button don kunna wuta.
2. Danna maɓallin maballin kan babban naúrar ko BLUETOOTH maballin kan ramut don zaɓar aikin Bluetooth. "BLUETOOTH" yana bayyana akan allon.
3. Yi aikin haɗi akan na'urar tushe don gano wannan naúrar. "CD-BH20 SHARP" zai bayyana a cikin jerin na'urorin da aka gano (idan akwai) a cikin na'urar tushe. (Koma zuwa tushen na'urar da take aiki don cikakken bayani). Bayanan kula: Sanya na'urorin don haɗawa tsakanin ƙafa 3 (mita 1) na juna yayin haɗawa. Wasu na'urorin tushen basu iya nuna jerin na'urorin da aka gano ba. Don haɗa wannan naúrar da na'urar tushe, koma zuwa ga tushen na'urar da ke aiki don cikakken bayani.
4. Zaɓi "CD-BH20 SHARP" daga jerin asalin. Idan ana buƙatar lambar wucewa *, shigar da “0000”. * Ana iya kiran lambar wucewa da lambar sirri, lambar wucewa, lambar PIN ko kalmar wucewa.
5. “Haɗa” yana bayyana akan nuni da zarar an sami nasarar haɗa naúrar tare da na'urar tushe. (Yanzu an haddace bayanan haɗawa a cikin naúrar.) Wasu na'urorin tushen sauti suna iya haɗuwa da naúrar kai tsaye bayan an gama haɗa su, in ba haka ba bi umarnin a cikin tushen na'urar da ke aiki da ita don fara haɗin.
6. Latsa maɓallin kunnawa a kan babban naúra, sarrafawar nesa ko na'urar tushe don fara kunna kunnawar Bluetooth.

Bayanan kula:

• Idan na'urar kamar su microwave oven, katin LAN mara waya, na'urar Bluetooth ko duk wani na'ura da ke amfani da madaidaicin GHz 2.4 ana sanya shi kusa da tsarin ana iya jin sautin katsewar sauti.
• Nisan watsawa na siginar mara waya tsakanin na'urar da babban naúrar ya kai kusan ƙafa 32 (mita 10), amma ƙila ya bambanta dangane da yanayin aikinka.
• Idan simintin karfe ko bangon ƙarfe yana tsakanin na'urar da babban naúrar, tsarin bazai yi aiki kwata-kwata ba, saboda siginar mara waya ba zata iya shiga ƙarfe ba.
• Idan aka kashe wannan naúrar ko asalin na'urar kafin a gama haɗin Bluetooth, ba za a kammala haɗawa ba kuma ba za a haddace bayanan haɗin ba. Maimaita mataki na 1 gaba don fara haɗuwa kuma.
• Don haɗawa da wasu na'urori, maimaita matakai 1 - 5 don kowane na'ura. Wannan naúrar na iya haddace har zuwa aƙalla na'urori 20. Idan na'uran na biyu ya haɗu, za'a share tsofaffin abin da ya haɗu.
• Da zarar an kori ko cire wata na'urar daga jerin haɗin, ana kuma share bayanan haɗin na'urar don aikin. Don sake sauraren sauti daga na'urar, yana buƙatar sake haɗawa. Yi matakan 1 - 5 don haɗa na'urar a sake.
• Wasu aikace -aikacen kiɗa baya goyan bayan Bluetooth Profile AVRCP 1.4, saboda haka ba za a yi aiki tare da ƙara ba kuma ba za a nuna bayanin waƙa koda na'urar Bluetooth ɗinku tana goyan bayan irin wannan profile.

Sauraron sauti
Duba cewa:

• Aikin tushen aikin Bluetooth yana kunne.
• Haɗa haɗin wannan naúrar da na'urar tushe.
• Naúrar tana cikin yanayin haɗe.

1. Danna maɓallin  (ON / TSAYA) button don kunna wuta.
2. Danna maɓallin  maballin kan babban naúra ko maɓallin BLUETOOTH a kan wutar lantarki don zaɓar aikin Bluetooth.
3. Fara haɗin Bluetooth daga na'urar tushen asalin Bluetooth.
4. Latsa BLUETOOTH  maballin.

Bayanan kula:

• Idan na'urar tushe tana da ƙarin aiki na bass ko aikin daidaitawa, saita su a kashe don kauce wa murƙushewar sauti.

Bayanan kula:

• Sake haɗa Bluetooth ɗin idan na'urar da ke tushen ba ta kunna ba, ko aikin Bluetooth ɗin ta a kashe ko yana cikin yanayin bacci.
• Ba'a iya sarrafa ƙarar wannan naúrar kamar yadda aka tsara ta dogara da na'urar.
  

  Maballin aiki na Bluetooth
  Babban naúrar	Ikon nesa	Aiki
  		Latsa maɓallin don wasa ko ɗan hutu.
  		Latsa maɓallin don tsallake zuwa waƙa ta gaba. Latsa ka riƙe don saurin turawa gaba.
  		Latsa maballin don tsallake zuwa waƙar da ta gabata. Latsa ka riƙe don juyawa da sauri.

Don cire haɗin na'urar Bluetooth
Yi kowane ɗayan abubuwan.

• Latsa maɓallin BUGAWA har sai “Haɗuwa” ta bayyana akan nuni.
• Cire haɗi ko kashe haɗin Bluetooth ɗin akan na'urar tushen sauti. Duba littafin aikin da aka kawo tare da na'urar.
• Kashe wannan rukunin.
  

Kunna wuta ta atomatik
Yayin yanayin jiran aiki na Bluetooth, naúrar zata kunna kai tsaye lokacin da aka saita haɗin Bluetooth tsakanin babban naúra da na'urarka.
Lura: Wannan aikin baya zartarwa yayin kashe yanayin jiran aiki na Bluetooth.

Haɗa zuwa wayar kai ta Bluetooth
Zaka iya haɗa saitin belun kunne na Bluetooth zuwa wannan naúrar. Kafin yin haɗin, bincika cewa:

• Babbar wayar Bluetooth da za'a haɗa tana cikin yanayin haɗawa da kuma tsakanin kewayo.

1. Zaɓi aikin da ake so don saurare, banda aikin Bluetooth.
2. Latsa ka riƙe maɓallin MAGANIN HEADPHONE a kan ramut ɗin har sai “Hanyar Headararrawa” ta bayyana akan nuni.
3. Latsa maballin shiga. "Neman" ya bayyana akan nuni.
4. Bayan kammala bincike, za a nuna sunayen na'urori na kusa a kan nuni. Latsa ordon zaɓar na'urar da kake so sannan ka danna maɓallin Shigar. "Haɗa" yana bayyana akan nuni kuma Linkararrakin Headararrakin Ladan LED (kore) yana haskakawa.

• Idan na'urarka bata bayyana a lissafin ba, yi abubuwa masu zuwa:
• Tabbatar cewa lasifikan kai na Bluetooth yana cikin yanayin haɗawa. Koma zuwa littafin da aka kawo shi.
• Latsa maballin.
• Maimaita matakai 2 - 4.

Bayanan kula:

• Haɗawa zuwa belun kunne na Bluetooth yana aiki a duk aikin banda Bluetooth.
• Haɗin haɗin kai na Bluetooth zai ƙare a aikin Bluetooth.
• Lokacin haɗi tare da Hanyar Headararrawa, fitowar mai magana shiru.
• Ana iya sarrafa ƙara a kan babbar naúrar biyu da haɗa belun kunne na Bluetooth daban.

Don cire haɗin wayar kai ta Bluetooth:
Kashe yanayin Bluetooth ɗin a kunnen Bluetooth ɗin da aka haɗa. Koma zuwa littafin da aka kawo shi. “Ba a cire haɗin ba” ya bayyana kuma Hasken Linkararrakin Wutar Lantarki (kore) ya kashe.

Don sake haɗi tare da na'urar belun kunne da ta gabata:
Dole ne na'urar ta kasance cikin yanayin haɗawa da kuma tsakanin kewayo.

1. Latsa maballin MAGANIN KAI. "Haɗin Headarar kai" zai yi haske yana dogaro da haɗin ƙarshe.
2. Tsakanin dakika 5 saika danna maballin SAMU. "Linking" za a nuna. "Haɗa" yana bayyana idan sake haɗin hanyar haɗi ya yi nasara.
   Lura:
   Idan “Ba a samo shi ba” ya bayyana, maimaita daga mataki na 1. Tabbatar cewa na'urar da za a haɗa tana tsakanin kewayo da yanayin haɗawa.

Sauraron CD ko MP3 diski

Disc sake kunnawa

1. Danna maɓallin  (ON / TSAYA) button don kunna wuta.
2. Latsa maɓallin INPUT akai-akai akan babban naúrar don zaɓar aikin CD.
3. Danna maɓallin (OPEN / CLOSE) maballin don buɗe ɓangaren faifai.
4. Sanya faifan a faifan diski, yiwa lakabin gefen sama.
5. Danna maɓallin (OPEN / CLOSE) maballin don rufe tire.
6. Danna maɓallin / (CD ) maballin don fara kunnawa.

Don tsayar da sake kunnawa:
Danna maɓallin maballin.

Tsanaki:

• Kada a sanya fayafai guda biyu a cikin tire ɗaya.
• Kada ku kunna faifan siffofi na musamman (zuciya, octaga, da sauransu). Yana iya haifar da rashin aiki.
• Kada a tura tiren diski yayin da yake motsawa.
• Idan wutan ya gaza sai a jira har sai an dawo da wutar.
• Idan TV ko tsangwama na rediyo ya faru yayin aikin CD, kawar da sashin daga TV ko rediyo.
• Idan kayi amfani da diski 3 ″ (8 cm), tabbatar cewa an sanya shi a cikin maɓallin diski.
• Saboda tsarin bayanan faifan, zai dauki tsawon lokaci kafin a karanta MP3 diski fiye da CD na al'ada (kimanin dakika 20 zuwa 90).

Lura don CD ko MP3 diski:

• Rewritable Multi-fayafai tare da rubutun da ba a ƙare ba, ana iya yin wasa.

Don ci gaba da sake kunnawa bayan tsayawa (ci gaba da kunnawa) (MP3 kawai)
Zaka iya ci gaba da kunna kunnawa daga kunna waƙar da aka dakatar.

1. Yayin da faifai ke kunne, latsa button sau ɗaya.
2. Don ci gaba da kunnawa, latsa CD ɗin maballin. Sake kunnawa yana ci gaba daga waƙar da ka tsayar.

Don soke sake kunnawa sake kunnawa:
Danna maɓallin button sau biyu.

Ayyuka daban-daban na diski

Aiki	Babban naúrar	Ikon nesa	Aiki
Wasa			Latsa cikin yanayin tsayawa.
Dakata			Latsa cikin yanayin sake kunnawa. Latsa maɓallin don ci gaba da kunnawa - daga maɓallin dakatarwa.
Tsaya			Latsa cikin sake kunnawa mode.
Bi sawun sama / ƙasa			Latsa cikin sake kunnawa ko yanayin tsayawa. Idan ka latsa maballin a cikin yanayin tsayawa, danna maballin don fara waƙar da ake so.
Saurin gaba / baya			Latsa ka riƙe ƙasa a yanayin sake kunnawa. Saki maballin don ci gaba da kunnawa.

Wasan bazuwar
Don bazuwar kunna duk waƙoƙi:
Latsa maballin PLAY MODE akan madogara ta maimaitawa har sai “Random” ya bayyana. Latsa / (CD ) button.
Don soke bazuwar wasa:
Latsa maɓallin PLAY MODE har sai “Na al'ada” ya bayyana. Alamar “RDM” za ta ɓace.

Bayanan kula:

• Idan ka danna maballin yayin bazuwar wasa, zaku iya matsawa zuwa waƙar da aka zaɓa ta gaba ta bazuwar aiki. Koyaya, da maballin baya baka damar matsawa zuwa waƙar da ta gabata. Za a samo farkon waƙar da ake kunnawa.
• A cikin bazuwar wasa, rukunin zai zaɓi kuma kunna waƙoƙi ta atomatik. (Ba za ku iya zaɓar tsari na waƙoƙin ba.) A cikin yanayin babban fayil a kunne, waƙoƙi kawai a cikin zaɓaɓɓun fayil za a yi wasa bazuwar.

Maimaita wasa

Maimaita kunnawa na iya kunna waƙa ɗaya, duk waƙoƙi ko jerin shirye-shiryen ci gaba.
Don maimaita waƙa ɗaya:
Zaɓi waƙar da ake so ta amfani da or maballin.
Latsa maballin PLAY MODE akai-akai har sai “Maimaita Daya” ya bayyana. Latsa (CD ) button.
Don maimaita duk waƙoƙi:
Latsa maballin PLAY MODE akai-akai har sai “Maimaita Duk” ap-pears. Latsa / (CD ) button.
Don maimaita waƙoƙin da ake so:
Yi matakai na 1 - 5 a cikin "Shirye-shiryen wasa" akan wannan shafin sannan danna maɓallin PLAY MODE akai-akai har sai "Maimaita Maimaitawa" ya bayyana.
Don maimaita babban fayil guda:
Yayinda kake cikin yanayin Jaka akan (MP3), latsa PRESET ( ) don zaɓar babban fayil ɗin da ake so. Latsa maballin PLAY MODE akai-akai har sai “Maimaita Jaka” ya bayyana. Latsa / (CD ) button.
Don soke maimaita kunnawa:
Latsa maballin PLAY MODE akai-akai har sai “Na al'ada” ya bayyana kuma  bace.

Tsanaki:
Bayan kayi maimaita kunnawa, tabbatar tabbatar latsa maballin. In ba haka ba, faifan zai yi ta ci gaba.

Shirya Wasanni (CD)

1. Yayin cikin yanayin tsayawa, danna maɓallin MEMORY akan ikon nesa don shigar da yanayin adana shirye-shiryen.
2. Danna maɓallin or maballin don zaɓar waƙar da ake so.
   
3. Latsa maɓallin MEMORY don adana lambar waƙa.
4. Maimaita matakai 2 - 3 don wasu waƙoƙi. Za a iya tsara waƙoƙi 32. Idan kana so ka bincika waƙoƙin da aka tsara,
   yayin yanayin tsayawa, danna maɓallin MEMORY akai-akai. Don share waƙoƙin da aka shirya, danna maɓallin CLEAR.
5. Danna maɓallin   (CD  ) maballin don fara kunnawa.

Shirya wasa (MP3)

1. Yayin cikin yanayin tsayawa, danna maɓallin MEMORY don shigar da yanayin adana shirye-shirye.
2. Latsa PRESET   maballin kan ramut don zaɓar babban fayil ɗin da ake so.
   
   Sannan danna maɓallin or maballin (m ramut) don zaɓar waƙoƙin da ake so.
   
3. Latsa maɓallin MEMORY don adana babban fayil ɗin da lambar waƙa.
4. Maimaita matakai 2 - 3 don sauran babban fayil / waƙoƙi. Za a iya tsara waƙoƙi 32.
5. Danna maɓallin  (CD ) maballin don fara kunnawa.

Don soke yanayin wasan da aka tsara:
Yayin shirya tsayayyen tsari, latsamaballin. Nunin zai nuna "Memory Clear" kuma za'a share duk abubuwan da aka tsara.
Tracksara waƙoƙi zuwa shirin:
Idan an adana shirin a baya, za a nuna mai nuna "MEM". Yayin yanayin tsayawa, danna maɓallin MEMORY sau ɗaya. A tsakanin sakan 10, latsa ka riƙe maɓallin MEMORY. Sannan bi matakai 2 - 3 don ƙara waƙoƙi.

Bayanan kula:

• Lokacin da aka buɗe ɓangaren faifai, ana soke shirin ta atomatik.
• Idan ka danna Maballin (ON / STANDBY) don shigar da yanayin jiran aiki ko canza aikin daga CD zuwa wani, zaɓin da aka tsara zai share.

Hanya don sake kunna MP3 diski tare da yanayin babban fayil akan:

Don kunna CD-R / RW.

1. A aikin CD, loda faifan MP3. Latsa maballin FOLDER kuma za a nuna bayanan diski.
   
2. Latsa PRESET  maballin don zaɓar babban fayil ɗin da ake so. (Yanayin jaka a kunne).
   
3. Zaɓi wanda ake so file don sake kunnawa ta latsa or maballin.
4. Danna maɓallin (CD ) button. Sake kunnawa zai fara kuma file za a nuna suna.
   • Ana nuna taken, Artist da sunan Kundin idan aka yi rikodin su akan faifan.
   • Game da sake kunnawa tare da yanayin babban fayil a kunne, latsa PRESET ( ) maballin, kuma babban fayil din na iya
     za a zaba duk da cewa yana cikin yanayin kunnawa / ɗan hutu. Zai ci gaba da kunnawa / ɗan hutu a cikin
     Waƙa ta 1 na babban fayil ɗin da aka zaɓa.
   • Za'a iya canza abun cikin nuni ta latsa maballin NUNAWA.
     

Lura:
Idan an nuna "Ba a Tallafa" ba, yana nufin "Ba a tallafawa sake kunnawa file” aka zaba.

Sauraron na'urar adana USB / MP3 player

Lura:
Wannan samfurin bai dace da MTP da AAC ba file tsarin daga na’urar ajiya ta USB ko MP3 player.

Don kunna kunna USB / MP3 mai kunnawa tare da yanayin folda kunna / kashe

1. Danna maɓallin INPUT (babban naúrar) akai -akai don zaɓar aikin USB. Haɗa na'urar ƙwaƙwalwar USB wanda ke da tsarin MP3 files a kan naúrar. Lokacin da aka haɗa ƙwaƙwalwar USB zuwa babban naúrar, bayanin na'urar zai bayyana. Don kunna kunnawa tare da yanayin babban fayil, bi mataki na 2 a ƙasa. Don sake kunnawa tare da kashe yanayin babban fayil, tsallake zuwa mataki na 3 a ƙasa.
2. Latsa maballin FOLDER, saika latsa PRESET maballin don zaɓar babban fayil ɗin da ake so. Don fara kunnawa, je zuwa mataki na 4. Don canza babban fayil na sake kunnawa, latsa PRESET maballin don zaɓar wani babban fayil.
3. Zaɓi wanda ake so file don sake kunnawa ta latsa  or maballin.
4. Danna maɓallin  (Kebul ) button. Sake kunnawa zai fara kuma file za a nuna suna.
   • Ana nuna taken, Artist da sunan Kundin in an yi rikodin su a cikin na'urar ƙwaƙwalwar USB.
   • Za'a iya canza abun cikin nuni ta latsa maballin NUNAWA.

Lura:
Don tsayar da sake kunnawa: Latsa (Kebul ) button.

Don cire na'urar ƙwaƙwalwar USB

1. Danna maɓallin maballin sau biyu don dakatar da sake kunnawa.
2. Cire haɗin na'urar ƙwaƙwalwar ajiyar USB daga tashar USB

Bayanan kula:

• SHARP ba za a ɗorawa alhakin asarar bayanai ba yayin da na'urar ƙwaƙwalwar USB an haɗa ta da tsarin sauti.
• Files wanda aka matsa a cikin tsarin MP3 ana iya kunna shi lokacin da aka haɗa shi da tashar USB.
• Wannan tsarin ƙwaƙwalwar USB yana tallafawa FAT 16 ko FAT 32.
• SHARP ba zai iya garantin cewa duk na'urorin ƙwaƙwalwar USB zasuyi aiki akan wannan tsarin odiyo ba.
• Ba a ba da shawarar kebul na USB don amfani a cikin wannan sautin ba
  tsarin haɗi zuwa na'urar ƙwaƙwalwar USB. Amfani da kebul na USB zai shafi aikin wannan tsarin odiyo.
• Wannan ƙwaƙwalwar USB ɗin ba za a iya aiki ta cibiyar USB ba.
• Tashar USB ɗin a wannan rukunin ba'a nufin don haɗin PC.
• Ba za a sake kunna HDD-ta waje ta hanyar tashar USB ba.
• Idan bayanan dake cikin ƙwaƙwalwar USB suna da girma, zai ɗauki lokaci mai tsawo kafin a karanta bayanan.
• Wannan samfurin zai iya kunna MP3 files. Za ta atomatik gane da file buga wasa. Idan ba a iya biya ba file an kunna shi akan wannan samfurin, ana nuna "Ba a Tallafa" kuma file za a tsallake ta atomatik. Wannan zai ɗauki secondsan daƙiƙa. Idan alamun mahaifa sun bayyana akan allon saboda ba'a bayyana su ba file, kashe naúrar sannan a sake kunna ta.
• Wannan samfurin yana da alaƙa da na'urori masu tarin yawa na USB da 'yan wasan MP3. Yana iya fuskantar duk da haka wasu rashin tsari saboda wasu dalilai da basu sani ba daga wasu na'urori. Idan wannan ya faru, kashe naúrar sannan a sake kunna ta.

Ayyuka masu zuwa daidai suke da ayyukan CD:
Ayyuka daban-daban na diski ………………………………………….
Wasan bazata ……………………………………………………… ..
Maimaita kunna …………………………………………………………
Shirya wasa (MP3) ………………………………………
Bayanan kula:

• Idan na'urar ƙwaƙwalwar ajiyar USB bata haɗu ba, "USB No Media" za a nuna a nuni.
• Saurin gaba/juyawa baya da inganci lokacin kunnawa bitrate mai canzawa file.
  Bayanan kula:
• Wannan rukunin yana goyan bayan “MPEG-1 Audio Layer-3” kawai. (S.ampYawan mita shine 32, 44.1, 48kHz)
• Tsarin sake kunnawa don MP3 files na iya bambanta dangane da software na rubutu da aka yi amfani da shi a lokacin file saukarwa.
• Bitrate wanda MP3 ke tallafawa shine 32 ~ 320 kbps.
• Files ba tare da tsarin MP3 ba za a iya kunna shi ba.
• Lissafin waƙa ba su da tallafi a kan wannan naúrar.
• Wannan rukunin zai iya nuna Sunan Jaka ko File Suna har zuwa haruffa 32.
• Jimlar adadin manyan fayilolin da aka karanta shine 999 gami da babban fayil tare da wanda ba a iya biya file. Koyaya, nuni yana nuna babban fayil tare da MP3 files.
• Ba za a nuna lokacin sake kunnawar nuni daidai lokacin kunnawa bitrate mai canzawa file.

Don cire na'urar ƙwaƙwalwar USB

1. Danna maɓallin maballin sau biyu don dakatar da sake kunnawa.
2. Cire haɗin na'urar ƙwaƙwalwar ajiyar USB daga tashar USB.

Sauraron Rediyo

Tunatarwa

1. Danna maɓallin (ON / TSAYA) button don kunna wuta.
2. Latsa maɓallin TUNER (BAND) (madogara ta nesa) ko maɓallin INPUT (babban sashi) akai-akai don zaɓar FM Stereo, FM Mono ko AM.
3. Sauke hannu:
   Latsa GASKIYA ( or ) maɓallin (kulawar nesa) akai-akai don kunna tashar da ake so.
4. Gyara atomatik: Latsa ka riƙe TUNING ( or ) maballin. Ana yin sikanin kai tsaye kuma mai gyara zai tsaya a tashar watsa shirye-shirye ta farko da za'a karɓa.

Bayanan kula:

• Lokacin da tsangwama ta rediyo ya faru, kunna scan na atomatik na iya tsayawa ta atomatik a wancan lokacin.
• Tantance aikin atomatik zai tsallake tashoshin sigina masu rauni.
• Don tsayar da gyaran atomatik, latsa TUNING ( or ) maballin sake.

Don karɓar watsa sitiriyo na FM:

• Latsa maɓallin TUNER (BAND) don zaɓi yanayin sitiriyo. Za a nuna mai nuna "ST". " ” kuma   zai bayyana lokacin da watsa shirye-shiryen FM yake a sitiriyo.
• Idan karbar FM yana da rauni, danna maballin TUNER (BAND) don kashe alamar "ST". Liyafar ta canza zuwa ɗabi'a, kuma sautin yana bayyane.

Haddar tasha
Zaka iya adana tashoshin 40 na AM da FM a cikin ƙwaƙwalwa kuma ku tuna da su yayin tura maɓallin. (Saitin saiti)

1. Yi matakan 2 - 3 a cikin "Tuning".
2. Latsa maballin ƙwaƙwalwar ajiya.
   
3. Tsakanin dakika 30, latsa PRESET maballin don zaɓar lambar tashar da aka saita. Adana tashoshin a cikin ƙwaƙwalwa, cikin tsari, farawa da tashar da aka saita 1.
4. A tsakanin sakan 30, latsa MEMORY maballin don adana wannan tashar a ƙwaƙwalwa. Idan “MEM” da alamun saiti masu lamba sun bace kafin a haddace tashar, maimaita aikin daga mataki na 2.
5. Maimaita matakai 1 - 4 don saita wasu tashoshi, ko don canza tashar da aka saita. Lokacin da aka adana sabon tashar a cikin ƙwaƙwalwar, tashar da aka haddace a baya don waccan lambar tashar da aka saita zata share.

Lura: Aikin ajiye yana kare tashoshin da aka haddace na hoursan awanni idan ya kasance akwai gazawar wuta ko igiyar wutar AC ta yanke.
Don tuna tashar da aka haddace
Latsa PRESET maballin don zaɓar tashar da ake so.

Don bincika saitattun tashoshi

1. Latsa ka riƙe PRESET  Maɓallin har sai lambar da aka saita ta haskaka. Za'a kunna tashoshin da aka tsara cikin tsari, na dakika 5 kowanne.
2. Latsa PRESET maɓallin sake lokacin da tashar da ake so take.

Don share duk saitaccen ƙwaƙwalwar ajiya

1. Danna maɓallin (ON / TSAYA) button don kunna wuta.
2. Latsa maɓallin shigar da abubuwa (babban sashi) akai-akai ko maɓallin TUNER (BAND) (madogara mai nisa) don zaɓar Mai gyara. 3 A aikin Mai Gyara, latsa ka riƙe maɓallin CLEAR (madogara ta nesa) har sai “Tuner Clear” ya bayyana.
   

Mai ƙidayar lokaci da aikin bacci (Nesa kawai)

Sake kunnawa lokaci:

Naúrar tana kunnawa kuma tana kunna tushen da ake so (CD, TUNER, USB, AUDIO IN, LINE IN) a lokacin da aka tsara.
Wannan naurar tana da lokaci guda 2: LOKACI DA LOKACI.
Da zarar lokaci (nuna alama): Da zarar mai ƙidayar lokaci yayi aiki sau ɗaya kawai a lokacin saiti.
Mai saiti na yau da kullun (alamar "DAILY"): Wasannin saita lokaci na yau da kullun yana aiki a daidai lokacin saiti kowace rana da muka saita. Don tsohonample, saita mai ƙidayar lokaci azaman kiran farkawa kowace safiya.
Amfani da lokaci ɗaya da mai ƙidayar lokaci a haɗe:
Don misaliample, yi amfani da saita lokaci don sauraron shirin rediyo, kuma yi amfani da mai saita lokaci na yau da kullun don farkawa.

1. Kafa kullun kuma lokaci ɗaya.
   
   Kafin saita lokaci:

• Duba cewa an saita agogo zuwa daidai lokacin. Idan ba'a saita shi ba, baza ka iya amfani da aikin lokaci ba.
• Don sake kunnawa mai ƙidayar lokaci: Toshe cikin USB ko ɗora fayafai da za a kunna.

1. Danna maɓallin (ON / TSAYA) button don kunna wuta.
2. Latsa maballin lokaci.
3. Danna ( or ) maballin don zaɓar "Sau ɗaya" ko "Daily", kuma latsa maɓallin Shigar.
4. Danna ( or ) maballin don zaɓar “Saitunan Saiti”, kuma latsa maɓallin Shigar.
5. Don zaɓar tushen sake kunnawa na mai ƙidayar lokaci (CD, TUNER, USB, AUDIO IN, LINE IN), latsa ( or ) maballin. Latsa maɓallin Shigar. Lokacin da ka zaɓi mai gyara, zaɓi tashar ta latsa ( or ), sannan danna maɓallin Shigar. Idan ba a shirya tashar ba, za a nuna “Babu Saiti” kuma za a soke saitin mai ƙidayar lokaci. Don haddace tasha, koma `` Haddar tasha ''.
6. Don daidaita ranar, latsa (  or ) sannan ka latsa maballin SHIGA. maballin
7. Latsa ( or ) Maballin don daidaita sa'a, sannan danna maɓallin Shigar.
8. Don daidaita mintuna, latsa ( or ) maballin sannan danna maɓallin Shigar.
9. Sanya lokacin gamawa azaman matakai na 7 da 8 na sama.
10. Don daidaita ƙarar, latsa ( or ) but- ton sannan kuma latsa maballin Shigar.
11. Danna maɓallin (ON / TSAYA) maballin don shigar da yanayin jiran aiki. Alamar “TIMER” ta haskaka.
12. Lokacin da lokacin saiti ya isa, sake kunnawa zai fara. Willara zai ƙaruwa a hankali har sai ya kai girman saiti. Alamar mai ƙidayar lokaci zata ƙyaftawa yayin sake kunnawa mai ƙidayar lokaci.
13. Lokacin da aka ƙare lokacin ƙarewa, tsarin zai shiga yanayin jiran aiki ta atomatik.

Da zarar lokaci: Za'a soke lokacin.
Kullum mai lokaci: Mai ƙidayar lokaci yana aiki a lokaci guda kowace ranar da aka zaɓa. Soke mai ƙidayar lokaci lokacin da ba ya cikin amfani.

Bayanan kula:

• Lokacin aiwatar da sake kunnawa na lokaci ta amfani da wani naúrar da aka haɗa da tashar USB ko AUDIO IN ko LINE IN jack, zaɓi “USB” ko “AUDIO IN” ko “LINE IN” a mataki na 5. Wannan naúrar za ta kunna ko shigar da yanayin jiran aiki ta atomatik . Koyaya, sashin da aka haɗa ba zai kunna ko kashe ba.
• Don dakatar da sake kunnawa mai ƙidayar lokaci, bi mataki "Soke saitin mai ƙidayar lokaci" na wannan shafin.

Duba lokacin saita lokaci:

1. Kunna wutar. Latsa maballin lokaci.
2. Danna ( or ) maballin don zaɓar "Sau ɗaya" ko "Daily", kuma latsa maɓallin Shigar.
3. Latsa ( or ) maballin don zaɓar “Kira mai ƙidayar lokaci”, kuma latsa maɓallin Shigar.

Soke saitin mai ƙidayar lokaci:

1. Kunna wutar. Latsa maballin lokaci.
2. Latsa ( or ) maballin don zaɓar "Sau ɗaya" ko "Daily", kuma latsa maɓallin Shigar.
3. Latsa ( or ) maballin don za “ar “Mai Offidayar Lokaci”, kuma latsa maɓallin Shigar. Za a soke mai ƙidayar lokaci (ba za a soke saitin ba).

Yin amfani da saitin saita lokaci wanda aka haddace:

Za'a haddace saita saita lokaci da zarar an shigar dashi. Don sake amfani da saitin iri ɗaya, aiwatar da waɗannan ayyukan.

1. Kunna wutar. Latsa maballin lokaci.
2. Latsa ( or ) maballin don zaɓar "Sau ɗaya" ko "Daily", kuma latsa maɓallin Shigar.
3. Danna ( or ) maballin don zaɓar "Mai ƙidayar lokaci", kuma latsa maɓallin Shigar.
4. Danna maɓallin (ON / TSAYA) button don shigar da yanayin jiran aiki na wuta.

Aikin bacci
Rediyo, faifai, USB, Audio A, Layi A, da Bluetooth duk ana kashe su ta atomatik.

1. Kunna maɓallin sauti da ake so.
2. Latsa maɓallin Barci.
3. A tsakanin dakika 5, latsa maɓallin SLEEP sau da yawa don zaɓar lokaci.
   
4. Alamar "BARCI" zata bayyana.
5. Naúrar zata shigar da yanayin jiran aiki ta atomatik bayan lokacin da aka saita ya wuce. Za'a juya ƙarar minti 1 kafin aikin bacci ya ƙare.

Don tabbatar da sauran lokacin bacci:

1. Yayinda aka nuna “BARCI”, danna maɓallin SLEEP.

Don soke aikin bacci:
Danna maɓallin(ON / TSAYA) maballin yayin da aka nuna “BARCI”. Don soke aikin bacci ba tare da saita naúrar zuwa yanayin jiran aiki ba, ci gaba kamar haka.

1. Yayinda aka nuna “BARCI”, danna maɓallin SLEEP.
2. A tsakanin dakika 5, latsa maɓallin SLEEP sau da yawa har sai “Barci A Kashe” ya bayyana.

Don amfani da lokaci da aikin bacci tare
Barci da mai ƙidayar lokaci:
Don misaliample, zaku iya yin bacci kuna sauraron rediyo kuma ku farka zuwa CD washegari.

1. Sanya lokacin bacci (duba sama, matakai 1 - 5).
2. Yayinda aka saita saita lokacin bacci, saita kunna ƙidayar lokaci (matakai 2 - 10)
   

Inganta tsarin ku

Ba a haɗa igiyar haɗin ba. Sayi keɓaɓɓiyar igiyar kasuwanci kamar yadda aka nuna a ƙasa.

Sauraren sautin sake kunnawa na karamin na'urar kunna sauti, da dai sauransu.

1. Yi amfani da igiyar haɗi don haɗawa da ƙararar gidan kaset ɗin odiyo, da dai sauransu.
2. Latsa maballin (ON / STANDBY) don kunna wutar.
3. Latsa maballin shigar da bayanai (AUDIO / LINE (INPUT)) (babban sashi ko kuma madogara) akai-akai don zaɓar AUDIO IN aiki.
4. Kunna kayan haɗin da aka haɗa. Idan matakin ƙaramin na'urar da aka haɗa ya yi yawa, murdiyar sauti na iya faruwa. Idan wannan ya faru, daidaita ƙarar na'urar da aka haɗa.
   Lura: Don hana tsangwama da amo, sanya na'urar nesa da talabijin.

Wayoyin kunne

• Kada a saita onara zuwa iyakar a kunna. Matsanancin ƙarfi daga sautin kunne da belun kunne na iya haifar da rashin ji.
• Kafin sakawa ko cire lasifikan kai, rage ƙarar.
• Tabbatar cewa belin kunnenku yana da mato 1/8 ″ (3.5mm) da ƙima tsakanin 16 da 50 ohms. Shawarwarin da aka ba da shawarar shine 32 ohms.
• Filashi a cikin belun kunne yana katse masu magana ta atomatik.

Jadawalin warware matsalar

Idan wani abu yayi daidai da wannan samfurin, bincika mai zuwa kafin kiran dillalin SHARP mai izini ko cibiyar sabis.
Gabaɗaya

Alama	Dalili mai yiwuwa
Is Ba'a saita agogo zuwa daidai lokacin ba.	Failure Rashin wutar lantarki ta faru. Sake saita agogo.
● Lokacin da aka danna maɓalli, ƙungiyar ba ta amsawa.	● Sanya naúrar zuwa yanayin jiran aiki da ƙarfi sannan kuma kunna shi. Idan naúrar har yanzu bata aiki ba, sake saita ta.
● Babu sautin da ake ji.	Level Saitin ƙarar da aka saita zuwa "Volume Min". Are An haɗa belun kunne.

Ikon nesa

Alama	Dalili mai yiwuwa
Control Motar nesa ba ta aiki.	Cord Ba a saka igiyar wutar AC ta naúrar ba. Lar Polarity batirin yayi kuskure. ● Batura sun mutu. Nisan ko kusurwa ba daidai bane. Sensor Sanyin firikwensin nesa yana karɓar haske mai ƙarfi.

Tuner

Alama	Dalili mai yiwuwa
Radiyo na yin sautuna da ba sa sabawa koyaushe.	● placedungiyar da aka sanya kusa da TV ko kwamfuta. Anten Ba a sanya eriya ta FM / AM daidai ba. Matsar da eriyar daga igiyar wutar AC idan tana nan kusa.

Bluetooth

Alama	Dalili mai yiwuwa
● Babu sautin da ake ji.	● Rukunan sunyi nisa da Bluetooth na'urar tushen sauti. Unitungiyar ba a haɗa ta da Bluetooth audio tushen na'urar
● Bluetooth sauti ya katse ko gurbata	Unit Rukunan sun yi kusa da na'urar da ke samar da su electromagnetic radiation. Is Akwai matsala tsakanin naúrar da Bluetooth tushen sauti na'urar.

Na'urar CD

Alama	Dalili mai yiwuwa
Back Sake kunnawa baya farawa. Back Sake kunnawa yana tsayawa a tsakiya ko ba'a yin shi da kyau.	Is An ɗora faifan a juye. Disc Disc din baya gamsar da ma'auni. Disk din ya gurbata ko ya karce.
Sounds Sauti na sake kunnawa ana tsallake, ko tsaya a tsakiyar waƙa.	Unitungiyar tana kusa da rawar jiki da yawa. Been An yi amfani da diski mai datti ● Sandaro ya samo asali a cikin naúrar.

USB

Alama	Dalili mai yiwuwa
Cannot Ba za a iya gano na'urar ba. Back Sake kunnawa baya farawa.	MP3 Babu MPXNUMX file cikin na'urar. Ba a shigar da na'urar daidai ba. An saka na'urar MTP. Na'urar ta ƙunshi AAC file kawai. MP3 MPXNUMX mai kare haƙƙin mallaka ko na karya file ana bugawa baya.
N Ba daidai lokacin nunawa ba. Rong Ba daidai ba file nuni suna.	Ƙananan Bitrate files ana wasa da baya. ● The File An rubuta sunan a ban da haruffan Ingilishi.

Namiji:
Canje-canje na zafin jiki kwatsam, adanawa ko aiki a cikin yanayi mai ɗumi mai ɗumi na iya haifar da haɗuwa a cikin majalissar (CD-kori-kura, da sauransu) ko a kan mai watsawa a kan na'uran nesa. Sanda kewayawa na iya haifar da naúrar aiki. Idan wannan ya faru, bar wutar ba tare da diski a cikin naúrar ba har sai mai yuwuwar sake kunnawa ta yau da kullun (kimanin awa 1). Shafe duk wani sandaro akan mai watsawa da kyalle mai laushi kafin ayi aiki da naúrar.

Idan matsala ta faru
Lokacin da wannan samfurin ke fuskantar tsangwama na waje mai ƙarfi (girgizan injin, wutar lantarki mai wuce kima, ƙarar da ba ta dace batage saboda walƙiya, da sauransu) ko kuma idan an yi aiki da shi ba daidai ba, yana iya yin rauni.

Idan irin wannan matsalar ta faru, yi abubuwa masu zuwa:

1. Saita naúrar zuwa yanayin jiran aiki kuma sake kunna wutar.
2. Idan ba'a dawo da naúrar a aikin da ta gabata ba, toshe tare da toshe na'urar a ciki, sannan a kunna wutan. Lura: Idan babu wani aiki a sama wanda ya dawo da naúrar, share dukkan ƙwaƙwalwar ajiyar ta hanyar sake saita ta.

Lura:
Idan babu wani aiki a sama wanda ya dawo da naúrar, share duk ƙwaƙwalwar ajiyar ta sake saita ta.

Sake saitin masana'antu, share dukkan ƙwaƙwalwar ajiya

1. Danna maɓallin (ON / TSAYA) button don kunna wuta.
2. Latsa maɓallin shigarwa (babban naúra) akai-akai don shigar da Audio A yanayin.
3. Latsa maballin (babban sashi) sau ɗaya.
4. Latsa ka riƙe maballin (babban sashi) har sai “Sake saita” ya bayyana.
   

Tsanaki:
Wannan aikin zai share duk bayanan da aka adana a cikin ƙwaƙwalwa ciki har da agogo, saitunan mai ƙidayar lokaci da saiti mai gyara.
Kafin jigilar naúrar
Cire duk na'urorin da aka haɗa da naúrar. Bayan haka, saita naúrar zuwa yanayin jiran aiki na wuta. Aukar naúrar tare da wasu na'urorin da aka bari a haɗe ko diski da aka bari a ciki na iya lalata naúrar.
Kula da fayafai
Fayafai suna da tsayayyen lalacewa. Koyaya kuskurewa na iya faruwa saboda taruwar datti akan farfajiya.

• Kada a yi alama a gefen lakabin lakabi wanda aka karanta sigina.
• Kiyaye faifan diski daga hasken rana kai tsaye, zafi, da danshi mai yawa.
• Koyaushe riƙe fayafai a gefuna. Yatsun hannu, datti,
  ko ruwa a kan faifan CD na iya haifar da hayaniya ko kuskure. Tsaftace shi da taushi, busassun zane, goge kai tsaye daga tsakiyar, tare da radius.
  

Kulawa

Tsaftace majalisar
Lokaci-lokaci shafa majalissar tare da zane mai laushi da ruwan sabulu mai narkewa, sannan tare da bushe zane.

Tsanaki:

• Kada ayi amfani da sunadarai don tsaftacewa (fetur, mai laushi, da sauransu). Yana iya lalata majalisar minista.
• Kada a shafa mai a cikin naúrar. Yana iya haifar
  matsalar aiki.

Tsaftace ruwan tabarau na ɗaukar CD:
Don tabbatar da aikin CD mai kunnawa yadda yakamata, kiyaye rigakafin (tsabtace ruwan tabarau na laser) ya kamata a yi shi lokaci-lokaci. Ana samun wadatattun ruwan tabarau na kasuwanci. Tuntuɓi dillalin software na CD na gida don zaɓuɓɓuka.

Ƙayyadaddun bayanai

A matsayin ɓangare na manufofinmu na ci gaba da haɓakawa, SHARP yana da haƙƙin yin ƙira da canje-canje na ƙwarewa don haɓaka samfur ba tare da sanarwa ba. Adadin ƙididdigar aikin yi da aka nuna ƙimar ƙa'idodin rukunin samarwa ne. Zai yiwu a sami wasu karkacewa daga waɗannan ƙimomin a cikin keɓaɓɓu ɗaya.
Gabaɗaya

Tushen wuta	AC 100 - 240 V ~ 50/60 Hz
Amfanin wutar lantarki	25 W
Girma	Nisa: 16 - 1/2 "(420 mm) Tsawo: 5 - 1/8 "(130 mm) Zurfin: 11 - 1/4 ”(286 mm)
Nauyi	11.0 laba. (Kilogram 5)
Bluetooth band mita	2.402GHz - 2.480GHz
Bluetooth matsakaicin ƙarfin watsawa	+ 4 dBm
Mai jituwa Bluetooth	A2DP (Ci gaban Rarraba Audio Bluetooth 2.1 + EDR

Amplififi

Ƙarfin fitarwa	RMS: Jimlar 50 W (25 W ta kowace tashar zuwa 4 ohms a 1 kHz, 10% THD) FTC: 16 W mafi ƙarancin RMS a kowace tashar zuwa 4 ohms daga 60 Hz zuwa 20 kHz, 10% THD
Tashoshin fitarwa	Belun kunne: 16 - 50 Ω (shawarar: 32 Ω)
Tashoshin shigarwa	Audio A (siginar sauti): 500 mV / 47 k ohms Layi a cikin (shigar da Analog): 500 mV / 47 k ohms

Na'urar CD

Nau'in	Single Disc Multi-play karamin diski player
Karatun sigina	Ba a tuntube mu ba, 3-beam semiconductor laser pickup
D/A mai canzawa	Multi bit D / A mai sauyawa
Amsa mai yawa	20 - 20,000 Hz
Kewayo mai ƙarfi	90 DB (1 kHz)

USB (MP3)

USB mai masaukin baki dubawa	● Yarda da kebul na 1.1 (Cikakken Sauri) / 2.0 Girman Ajin Ma'aji. ● Tallafa Bulk kawai da yarjejeniyar CBI.
Taimako file	MPEG 1 Layer 3
Bitrate goyon baya	● MP3 (32 ~ 320 kbps)
Sauran	Imum Matsakaicin adadin MP3 files shine 65025. Matsakaicin adadin adadin manyan fayiloli shine 999 BABU tushen kundin adireshi. ● ID3TAG bayanan da aka tallafawa sune TITLE, ARTIST da ALBUM kawai. Yana tallafawa ID3TAG version 1 da version 2.
File tsarin goyon baya	● FAT 16 / FAT 32

Tuner

Kewayon mita	FM: 87.5 - 108.0 MHz AM: 530 - 1,710 kHz
Saita	40 (tashar FM da AM)

Mai magana

Nau'in	1-hanyar nau'in magana mai magana 3 "(8 cm) - 4 '- Cikakken Range
Matsakaicin ikon shigar da bayanai	50 W / tashar
Ƙarfin shigar da ƙima	25 W / tashar

 

Takardu / Albarkatu

Sharp Micro Component System [pdf] Jagoran Jagora Micro Bangaren Tsarin, CD-BH20

Magana

• Manual mai amfani