Amintacce
Mai ƙidayar ƙidayar RF
SKU: SEC_SIR321
View duk ingantaccen tsarin thermostat
Saurin farawa
Wannan a
Mai kula da tsakiya
domin
Turai.
Don gudanar da wannan na'urar da fatan za a haɗa ta zuwa wutar lantarki ta hanyar sadarwar ku.
Don ƙara wannan na'urar zuwa cibiyar sadarwar ku aiwatar da ayyuka masu zuwa:
Latsa ka riƙe maɓallin haɗin haɗin kan naúrar har sai RF LED ya fara walƙiya a cikin sauri. Sai ka saki maballin.” A cikin nasara haɗa RF LED zai daina walƙiya.
Muhimman bayanan aminci
Da fatan za a karanta wannan littafin a hankali. Rashin bin shawarwarin da ke cikin wannan jagorar na iya zama haɗari ko yana iya karya doka.
Mai ƙira, mai shigo da kaya, mai rarrabawa da mai siyarwa ba za su ɗauki alhakin kowace asara ko lalacewa sakamakon gazawar bin umarnin da ke cikin wannan jagorar ko wani abu ba.
Yi amfani da wannan kayan aikin kawai don manufar sa. Bi umarnin zubarwa.
Kada a jefar da kayan lantarki ko batura a cikin wuta ko kusa da buɗaɗɗen wuraren zafi.
Menene Z-Wave?
Z-Wave ita ce ka'idar mara waya ta duniya don sadarwa a cikin Smart Home. Wannan
na'urar ta dace don amfani a yankin da aka ambata a cikin sashin Quickstart.
Z-Wave yana tabbatar da ingantaccen sadarwa ta hanyar sake tabbatar da kowane saƙo (hanya biyu
sadarwa) kuma kowane kumburin da ke da ƙarfi na iya aiki azaman mai maimaitawa ga sauran nodes
(hanyar sadarwa) idan mai karɓa baya cikin kewayon mara waya kai tsaye na
watsawa.
Wannan na'urar da kowace na'urar Z-Wave na iya zama amfani tare da wani
ingantaccen na'urar Z-Wave ba tare da la'akari da iri da asali ba idan dai duka biyun sun dace da
kewayon mitar guda ɗaya.
Idan na'urar tana goyan bayan amintaccen sadarwa zai sadarwa tare da wasu na'urori
amintacce muddin wannan na'urar ta ba da tsaro iri ɗaya ko mafi girma.
In ba haka ba za ta juya ta atomatik zuwa ƙaramin matakin tsaro don kiyayewa
koma baya dacewa.
Don ƙarin bayani game da fasahar Z-Wave, na'urori, farar takarda da sauransu. da fatan za a duba
zuwa www.z-wave.info.
Bayanin Samfura
Secure Intelligent Relay yana samun gudun ba da sanda guda ɗaya, da goyan bayan jadawalin tushe na tsawon lokaci, auna yanayin zafi da delta da rahoton zafin jiki na tazara da sauransu.
Shirya don Shigarwa / Sake saiti
Da fatan za a karanta littafin mai amfani kafin shigar da samfurin.
Domin haɗa (ƙara) na'urar Z-Wave zuwa hanyar sadarwa da ita dole ne ya kasance cikin tsohowar masana'anta
jihar Da fatan za a tabbatar da sake saita na'urar zuwa tsohuwar masana'anta. Kuna iya yin hakan ta hanyar
yin aikin keɓancewa kamar yadda aka bayyana a ƙasa a cikin jagorar. Kowane Z-Wave
mai sarrafawa zai iya yin wannan aikin duk da haka ana ba da shawarar yin amfani da na farko
mai sarrafa hanyar sadarwar da ta gabata don tabbatar da cewa an cire na'urar sosai
daga wannan hanyar sadarwa.
Gargaɗi na Tsaro don Na'urori masu ƙarfi
HANKALI: ƙwararrun ƙwararrun ƙwararrun ma'aikata ne kawai ƙarƙashin la'akari da takamaiman ƙasar
jagororin shigarwa/ka'idoji na iya yin aiki tare da wutar lantarki. Kafin majalissar
samfurin, voltage hanyar sadarwa dole ne a kashe kuma a tabbatar da kar a sake kunnawa.
Shigarwa
Hanya na cire haɗin kai daga wadata, samun aƙalla "rarrabuwar tuntuɓar 3mm a cikin sandunan biyu, dole ne a haɗa" cikin ƙayyadaddun wayoyi. Muna ba da shawarar keɓantaccen da'irar da'ira daga rukunin mabukaci (samar da sa'o'i 24) wanda aka kiyaye shi ta fius na 15A HRC ko, zai fi dacewa a" 16A MCB. A wasu lokuta gazawar immersion na iya "lalata SIR. Shigar da 100mA RCD zai ba da ƙarin kariya ga rukunin. Idan ana so a haɗa SIR zuwa babban zobe to dole ne a kiyaye abin da ke ciyar da mai sarrafawa ta hanya ɗaya. SIR” bai dace da hawa a saman wani ƙarfe da aka gano ba.+
1. Cire fakitin kuma cire murfin gaba
Cire SIR daga marufin sa sannan a cire murfin gaban" a hankali, ta yin amfani da screwdriver mai ramuka a cikin" daraja, kamar yadda aka nuna a hoton da ke ƙasa:
2. Ana shirya SIR don hawan bangon bango
SIR ya dace da hawa kai tsaye a kan kowane saman” wanda aka ɗora akwatin gyare-gyaren ƙungiyoyi guda ɗaya yana da mafi ƙarancin zurfin 25mm don Burtaniya, ko 35mm don Nahiyar Turai. Ana iya shigar da kebul ta hanyar mafi dacewa yanke yanke.
Cire abubuwan da aka yanke kafin gyara akwatin. Inda ya dace, tona akwatin don samar da shigarwa mai dacewa don igiyoyi da igiyoyi masu sassauƙa da zafi. A kula don cire masu kaifi.” Tabbatar cewa clamp an sanya shi hanya madaidaiciya watau” hasashen da ke ƙasan clamp kamata” ya kama igiyar domin a tsare kebul ɗin da ƙarfi. Kebul clamp dole ne a ɗora su sosai har zuwa” 0.4Nm.
Don hawan bangon bango - "SIR za a iya saka kai tsaye zuwa kowane daidaitaccen ruwa" hawa akwatin wayoyi guda ɗaya tare da zurfin 25mm" don UK (BS 4662), ko 35mm don Nahiyar Turai (DIN" 49073).
Clamp duk abin da ke kan bangon da ke kusa da SIR,” ta amfani da trunking inda ya dace. Kebul mai sassauƙa zuwa "ya kamata a wuce na'urar ta hanyar shigar da kebul" rami a gefen ƙasa na SIR, kuma a kiyaye shi ƙarƙashin" cl na USB.amp bayarwa.”
3." Yin haɗi
Yi amfani da kebul na tagwaye-da-ƙasa tare da matsakaicin mai gudanarwa "girman 2.5mm2 madugu ɗaya don wadatar mai shigowa" zuwa SIR. Yi amfani da kebul mai sassauƙa mai ƙima mai mahimmanci uku-core” don haɗa SIR zuwa na'urar da za a canza. Don” na'urorin da aka ƙididdige su har zuwa 2kW suna amfani da mafi ƙarancin 1.0mm2 madugu masu sassauƙa. Don na'urorin da aka ƙididdige su har zuwa 3kW yi amfani da mafi ƙarancin 1.5mm2 madugu masu sassauƙa. Dole ne a yi amfani da kebul mai jujjuya zafin zafi idan an haɗa SIR zuwa injin nutsewa.
Dole ne a riƙa sawa da hannu da kuma haɗa duk masu gudanar da aikin ƙasa da ba a haɗa su da tashoshi na ƙasa a bayan SIR." Dole ne mai jagorar samar da ƙasa da kayan aikin ƙasa” dole ne su yi amfani da hanyoyin haɗin tasha daban” da aka bayar. Kashe hanyar sadarwa sannan ka haɗa masu da'ira don kayan da ke shigowa da na'urar" a bayan naúrar, kamar yadda aka nuna a shafi na gaba." Haɗa jagora guda biyu daga binciken firikwensin zafin jiki na zaɓi na waje (idan an kawo shi) zuwa ‘H4’ da ‘1’” mai alama. Wayoyin binciken ba su da wani” polarity.
4. Sanya SIR akan bangon gang / akwatin bango:
A hankali ba da SIR zuwa akwatin da aka ƙera/karfe kuma” amintacce ta amfani da sukurori biyu. A kula kada a lalata rufin” ko tarko masu gudanarwa lokacin da suka dace don zubar da akwatin bango.”
Naúrar ba a sanya hannu kan hanyar sadarwa ba: RF LED jinkirin walƙiya
RF hadawa/tsarin cirewa: RF LED mai saurin walƙiya
Hanyar haɗin RF ta ɓace ga mai sarrafawa: RF LED mai haske mai ƙarfi
RF cibiyar sadarwa yayi kyau: RF LED a kashe
Don ingantacciyar hanyar sadarwa ta RF, dace da naúrar a saman bene” matakin, kuma aƙalla 30cm nesa da abubuwa na ƙarfe da” na'urori kamar: microwave oven, cooker, firiji/firiza, bakin karfe, TV, akwatin saiti” ( tauraron dan adam /cable/Freeview), rediyo ko kwamfuta” (tebur/kwamfutar tafi da gidanka/ kwamfutar hannu).” Kada ku dace da naúrar tsakanin 100cm na na'urorin RF, kamar "wayoyin mara waya na DECT ko na'urorin Wi-Fi." Yana iya zama dole a sake matsugunin sashin idan matsalolin sadarwa sun faru." Kada a yi amfani da wayoyin hannu ko sanya su a kusa da wannan rukunin.
6." Daidaita murfin gaba da dubawa na ƙarshe:
Bayan shigar da skru masu hawa, gyara murfin gaban” baya. Bayar da murfin gaba ga naúrar kuma tabbatar da cewa ya danna amintacce a wurin.
Hadawa/keɓancewa
A kan tsohuwar masana'anta na'urar ba ta cikin kowace hanyar sadarwa ta Z-Wave. Na'urar tana buƙata
zama ƙara zuwa cibiyar sadarwa mara waya ta data kasance don sadarwa tare da na'urorin wannan cibiyar sadarwa.
Ana kiran wannan tsari Hada.
Hakanan za'a iya cire na'urori daga hanyar sadarwa. Ana kiran wannan tsari Warewa.
Dukkan hanyoyin biyu suna farawa ta hanyar babban mai kula da hanyar sadarwar Z-Wave. Wannan
an juya mai sarrafawa zuwa yanayin haɗawa daban-daban. Hadawa da Warewa shine
sannan ayi aikin hannu na musamman akan na'urar.
Hada
Latsa ka riƙe maɓallin haɗin haɗin kan naúrar har sai RF LED ya fara walƙiya a cikin sauri. Sai ka saki maballin.” A cikin nasara haɗa RF LED zai daina walƙiya.
Warewa
Latsa ka riƙe maɓallin haɗin haɗin kan naúrar har sai RF LED ya fara walƙiya a cikin sauri. Sai ka saki maballin.” A cikin nasara haɗa RF LED zai daina walƙiya.
Tsarin Bayanan Node
Tsarin Bayanan Node (NIF) shine katin kasuwanci na na'urar Z-Wave. Ya ƙunshi
bayanai game da nau'in na'urar da damar fasaha. A hada da
Ana tabbatar da keɓance na'urar ta hanyar aika Firam ɗin Bayanin Node.
Bayan wannan ana iya buƙatar wasu ayyukan cibiyar sadarwa don aika Node
Tsarin Bayani. Don fitar da NIF aiwatar da ayyuka masu zuwa:
Danna maɓallin Z-Wave
Saurin matsala harbi
Anan akwai ƴan alamu don shigarwar hanyar sadarwa idan abubuwa ba su yi aiki kamar yadda aka zata ba.
- Tabbatar cewa na'urar tana cikin yanayin sake saitin masana'anta kafin haɗawa. A cikin shakka cire kafin hada.
- Idan har yanzu haɗawa ta gaza, duba idan duka na'urorin suna amfani da mitar iri ɗaya.
- Cire duk matattun na'urori daga ƙungiyoyi. In ba haka ba za ku ga jinkiri mai tsanani.
- Kada a taɓa amfani da na'urorin baturi mai barci ba tare da mai kula da tsakiya ba.
- Kar a yi zaben na'urorin FLIRS.
- Tabbatar cewa kuna da isassun na'urar da ke da wutar lantarki don cin gajiyar saƙar
Ƙungiya – na'ura ɗaya tana sarrafa wata na'ura
Na'urorin Z-Wave suna sarrafa sauran na'urorin Z-Wave. Alakar dake tsakanin na'ura daya
sarrafa wata na'ura ana kiransa ƙungiya. Domin sarrafa wani daban
na'urar, na'urar sarrafawa tana buƙatar kula da jerin na'urorin da za su karɓa
sarrafa umarni. Waɗannan jerin sunayen ana kiran su ƙungiyoyin ƙungiyoyi kuma koyaushe
masu alaƙa da wasu abubuwan da suka faru (misali maɓalli da aka danna, firikwensin firikwensin,…). Idan akwai
taron ya faru duk na'urorin da aka adana a cikin ƙungiyoyin ƙungiyoyi zasu
karbi umarnin mara waya mara waya iri ɗaya, yawanci umurnin 'Basic Set'.
Ƙungiyoyin Ƙungiya:
Lambar Rukuni Matsakaicin NodesDescription
| 1 | 4 | Nodes don karɓar rahoton Jadawalin |
| 2 | 4 | Nodes don karɓar rahoton firikwensin matakan daban-daban"
Lura: Rukuni-2 yana samuwa ne kawai idan waje" ana haɗe firikwensin yanayi.
|
Ma'aunin Kanfigareshan
Ya kamata samfuran Z-Wave suyi aiki daga cikin akwatin bayan haɗawa, duk da haka
wasu ƙayyadaddun tsari na iya daidaita aikin mafi kyau ga buƙatun mai amfani ko buše gaba
ingantaccen fasali.
MUHIMMI: Masu sarrafawa na iya ba da izinin daidaitawa kawai
dabi'u da aka sanya hannu. Domin saita ƙima a cikin kewayon 128 … 255 ƙimar da aka aiko a ciki
aikace-aikacen zai zama ƙimar da ake so ya rage 256. Ga misaliample: za a
siga zuwa 200  ana iya buƙata don saita ƙimar 200 a debe 256 = debe 56.
Idan darajar byte biyu daidai wannan dabarar ta shafi: Ƙimar da ta fi 32768 maiyuwa.
da ake buƙata a ba shi azaman munanan dabi'u kuma.
Siga 1: Kunna gaza amintaccen lokaci
Girman: 1 Byte, Default Value: 0
SettingDescription
| 0-255 | Daraja |
Siga 2: Ma'aunin Zazzabi
Girman: 1 Byte, Default Value: 0
SettingDescription
| 0-127 | “°C |
| 128-255 | "°F |
Siga 3: Matsakaicin rahoton zafin jiki
Girman: 2 Byte, Default Value: 0
SettingDescription
| 1-65534 | Dakika |
Siga na 4: Rahoton sanyi na Delta
Girman: 2 Byte, Default Value: 0
SettingDescription
| 1-100 | "°C cikin 0,1″°C |
| 1-500 | “°F cikin 0,1″°F |
Siga 5: Yanke Zazzabi
Girman: 2 Byte, Default Value: 0
SettingDescription
| 1-1000 | "°C cikin 0,1″°C |
| 320-2120 | “°F cikin 0,1″°F |
Bayanan Fasaha
| Girma | 85 x 85 x 44 mm |
| Nauyi | 123 gr |
| Platform Hardware | ZM3102 |
| EAN | 5015914083563 |
| IP Class | IP20 |
| Voltage | 230 V |
| Loda | 3000 W |
| Nau'in Na'ura | Mai kula da tsakiya |
| Kayan Kayan Kayan Kayan Gida | Sauya Binary |
| Specific Class Class | Ba a yi amfani da takamaiman Class Na'ura ba |
| Z-Wave Shafin | 4.53 |
| Takaddun shaida ID | Saukewa: ZC08-14040014 |
| Z-Wave Samfurin Id | 0x0059.0x0010.0x0002 |
| Yawanci | Turai - 868,4 Mhz |
| Matsakaicin ikon watsawa | 5mW ku |
Darussan Umurni masu goyan baya
- Ƙungiya
- Na asali
- Kanfigareshan
- Specific Mai ƙira
- Firikwensin Multilevel
- Jadawalin
- Canja Binary
- Sigar
Sarrafa Rukunin Umurni
- Na asali
- Canja Binary
Bayanin takamaiman sharuddan Z-Wave
- Mai sarrafawa -na'urar Z-Wave ce da ke da ikon sarrafa hanyar sadarwa. Masu sarrafawa yawanci ƙofofin ƙorafi ne, Sarrafa Nesa ko masu sarrafa bango masu sarrafa baturi.
- Bawa - na'urar Z-Wave ce ba tare da ikon sarrafa hanyar sadarwa ba. Bayi na iya zama na'urori masu auna firikwensin, masu kunnawa har ma da masu sarrafa nesa.
- Mai Kula da Farko - shine babban mai tsara hanyar sadarwa. Dole ne ya zama mai sarrafawa. Za a iya samun mai sarrafawa na farko ɗaya kawai a cikin hanyar sadarwar Z-Wave.
- Hada - shine tsarin ƙara sabbin na'urorin Z-Wave cikin hanyar sadarwa.
- Warewa - shine tsarin cire na'urorin Z-Wave daga hanyar sadarwa.
- Ƙungiya - dangantaka ce mai sarrafawa tsakanin na'ura mai sarrafawa da na'ura mai sarrafawa.
- Sanarwar Wakeup - saƙo ne na musamman mara waya ta na'urar Z-Wave don sanar da cewa yana iya sadarwa.
- Tsarin Bayanan Node - saƙo ne na musamman mara waya ta na'urar aZ-Wave don sanar da iyawa da ayyukanta.
