NICOR H12VSENSOR Sensors Remote Programmer

BAYANI

Tushen wutan lantarki	2 xAA1 5V baturi, Alkaline yafi so
Harka mai ɗaukar nauyi	RC-100 a cikin akwati
Sadarwa	940 nm Infrared Tx & Rx
Kewayon lodawa	Har zuwa 15 m (50 ft.)
Op. zafin jiki	0°C-50°C (32°F-122°F)
Girma	123 x 70 x 20.3 mm (4. 84" x 2.76" x 0"

GARGADI  Cire batura daga daki idan ba za a yi amfani da nesa a cikin kwanaki 30 ba.

KARSHEVIEW

Kayan aikin Confiquration na Wireless Wireless Remote kayan aiki ne na hannu don sarrafa na'urori masu auna firikwensin IR mai nisa. Kayan aikin yana ba na'urar damar yin gyare-gyare ta hanyar maɓallin turawa ba tare da tsani ko kayan aiki ba, kuma tana adana har zuwa yanayin sigar firikwensin firikwensin don saurin daidaita na'urori masu auna firikwensin.
Ikon nesa yana aika saitin firikwensin a tsayin tsayi har zuwa ƙafa 50. Na'urar zata iya nuna sigogin firikwensin da aka kafa a baya, kwafin sigogi da aika sabbin sigogi ko ma'aunin sigar ajiyafiles. Don ayyukan da za'a iya son saituna iri ɗaya a cikin ɗimbin wurare ko wurare, wannan ƙarfin yana ba da ingantaccen hanyar daidaitawa. Ana iya kwafi saituna a ko'ina cikin rukunin yanar gizon, ko a cikin shafuka daban-daban.

MALAMAI LED

LED	BAYANI	LED	BAYANI
HASKE	Babban aikin juyi datsa (Don saita matakin fitarwa na hasken da aka haɗa yayin zama)		Don zaɓar ƙimar lux ɗin da ke kewaye na yanzu azaman ƙofar hasken rana. Wannan fasalin yana ba da madaidaicin damar yin aiki da kyau a kowane yanayi na aikace-aikacen gaske.
HANKALI	Don saita azancin zama na Sensor		Na'urar firikwensin hasken rana yana daina aiki, kuma duk motsin da aka gano zai iya kunna na'urar hasken wuta, komai hasken halitta.
RIKE LOKACI	Lokacin da Sensor zai kashe (idan kun zaɓi matakin jiran aiki shine 0) ko rage hasken zuwa ƙaramin matakin bayan an bar yankin.	TSAYE-BY DIM	Don saita matakin fitarwa na hasken da aka haɗa a lokacin sarari. Na'urar firikwensin zai daidaita fitowar haske a matakin da aka saita. Saita matakin STAND-BY DIM a O yana nufin haske ya cika lokacin wurin zama.
SENSOR HASKEN RANA	Don wakiltar ƙofa daban-daban na matakin hasken halitta don Sensor.	LOKACI MAI TSAYA	Don wakiltar lokacin da firikwensin zai kiyaye hasken a ƙananan ƙananan matakin bayan TIME HOLD ya wuce.

 

Canja saituna masu yawa na firikwensin tare da buɗaɗɗen firikwensin photocell mai kaifin baki

1. Latsa Watsawa, Manufofin jagoran nesa za su nuna sabbin sigogi.
2. Latsa UPor KASA Shiga cikin yanayin saitin, ma'aunin Led na ma'auni na ramut zai yi walƙiya don zaɓar.
3.  Latsa ,2 LED Manuniya za su yi haske a cikin hasken rana saitunan firikwensin, zaɓi hasken rana 10 30 50  azaman saiti zuwa haske ta atomatik, zaɓi hasken rana 100 300 500  azaman saiti don kunnawa ta atomatik.
4. Latsa OK don tabbatar da duk saitin da adanawa.
5.  Nufin firikwensin manufa kuma latsa AIKA don loda sabon siga. Hasken jagora wanda firikwensin

NOTE: an kashe shi ta tsohuwa.

1. Buɗe ko rufe firikwensin hasken rana ta turawa lokacin da remote yana cikin yanayin saitin.
2. Lokacin da firikwensin hasken rana mai wayo ya buɗe, alamun Led 2 suna walƙiya a saitin firikwensin hasken rana. zaɓi hasken rana 10 30 50 azaman saiti zuwa haske ta atomatik, zaɓi hasken rana 100 300 500 Lokacin da firikwensin hasken rana ya rufe, 1 Led alama ce ta filasha a saitin firikwensin hasken rana don zaɓar kofa na firikwensin hasken rana.
3. Lokacin da firikwensin hasken rana ya buɗe, lokacin jiran aiki shine kawai 8
4. Smart hasken rana firikwensin yana faruwa na al'ada na firikwensin hasken rana na waje, yana aiki da kansa.
5. Duba Ayyukan Sensor Hasken Rana.

Ayyukan Corridor

Wannan aikin a cikin firikwensin motsi don cimma nasarar sarrafa matakin matakin uku, don wasu wurare waɗanda ke buƙatar sanarwar canjin haske kafin a kashe. Firikwensin yana ba da matakan haske 3: 100% -> haske mai duhu (hasken halitta bai isa ba) -> kashe; da lokutan 2 na lokacin jiran da za a zaɓa: lokacin riƙe motsi da lokacin jiran aiki; Zaɓaɓɓen ƙofar hasken rana da yancin gano wuri.

• Tare da isasshen haske na halitta, hasken ba ya kunna lokacin da aka gano kasancewar.
• Tare da rashin isasshen hasken halitta, firikwensin yana kunna hasken ta atomatik lokacin da aka gano kasancewar.
• Bayan lokacin riko, hasken yana dikuwa zuwa matakin jiran aiki idan hasken halitta da ke kewaye ya kasance ƙasa da iyakar hasken rana.
• Haske yana kashe ta atomatik bayan lokacin jiran aiki ya wuce.

Ayyukan Sensor Hasken Rana

Buɗe firikwensin hasken rana ta turawa lokacin da remote control ke cikin saitin yanayin.

• Hasken yana kunna a 100% lokacin da aka gano motsi.
• Hasken yana dusashewa zuwa matakin jiran aiki bayan riƙon lemun tsami.
• Hasken ya kasance a matakin dimming da dare.

Saituna akan wannan nuni:

• Lokacin riƙewa: 30min
• saita zuwa haske akan: 50lux
• saita saita zuwa haske: 300lux
• Dim na tsaye: 10%
• Lokacin tsayawa: +oo (lokacin da firikwensin photocell mai wayo ya buɗe, lokacin jiran aiki kawai +oo)

MAGANAR BUTTON

KASANCEWA

Abun cikin SETTING ya ƙunshi duk saitunan da ake samu da sigogi don firikwensin nesa. Yana ba ku damar canza ikon sarrafawa, sigogi, da aiki na firikwensin daga tsohuwar masana'anta ko sigogi na yanzu.

Canja saitunan firikwensin (s) da yawa

1. Latsa Watsawa maballin, ledojin ramut zai nuna sabbin sigogin da kuka saita.
   NOTE: idan ka tura KASHE/KASHE button kafin, dole ne ka tura Mota maballin don buɗe firikwensin.
2. LatsaUP or KASA shigar da yanayin saitin, madaidaicin leds na remote control zai yi haske don zaɓar, kewaya zuwa saitunan da ake so ta latsawa. UP KIBIYAR HAGU KASA KIBIYAR DAMA don zaɓar sabbin sigogi.
3. Danna Ok don tabbatar da duk saiti da adanawa.
4. Nufin firikwensin manufa kuma latsa don loda sabon siga, hasken jagoranci wanda firikwensin ya haɗa zai kunna/kashe a matsayin tabbaci.
   NOTE: Saitin yana aiki maɓalli mataki shine ta UP or KASA, Shiga cikin yanayin saitin.
   NOTE: Hasken jagora wanda firikwensin ke haɗawa da shi zai kunna/kashe don tabbatar da karɓar sabbin sigogin.
   NOTE: Idan ka danna Watsawa maɓalli, masu nunin jagora na nesa zasu nuna sabbin sigogi waɗanda aka aiko.

• Lokacin da matakin hasken halitta ya wuce saiti zuwa haske, hasken zai kashe ko da lokacin da sarari yake.
• Hasken yana kunna ta atomatik a 10% lokacin da hasken halitta bai isa ba (babu motsi).

Ayyukan Corridor VS Ayyukan Sensor Hasken Rana.

1. Aiki na corridor, kunna hasken dole ne ta hanyar matakin haske na ƙasa ƙananan firikwensin hasken rana da zama. A cikin aikin firikwensin hasken rana, kunna hasken ta matakin matakin hasken rana ƙasan madaidaicin hasken rana zuwa haske ko da sarari.
2. A cikin aikin corridor, kashe haske ta ƙare lokacin jiran aiki idan sarari. A cikin aikin firikwensin hasken rana, kashe hasken ta matakin haske na halitta sama da madaidaicin hasken rana zuwa kashe Hauwa'u idan zaune.
3. Aikin firikwensin hasken rana mai kaifin baki, matakin haske na halitta ya fi sauƙi/ƙasa da saitin hasken rana zuwa kashe/ kunna dole ne a kiyaye aƙalla minti 1, wanda zai kashe/ kunna hasken ta atomatik.

Game da SAKE STARWA da MODE (1,2,3,4) Ikon nesa ya zo tare da MODES Scene 4 waɗanda ba tsoho ba. Kuna iya yin sigogin da ake so kuma ku adana azaman sabuwar MODE(1,2,3,4) don saita firikwensin da aka shigar.

SATI: duk saituna suna komawa zuwa saitunan DIP Switch a cikin firikwensin.

Hotunan Hotuna (1 2 3 4)

Aikace-aikace	Zaɓuɓɓukan Scene	Haske	Yankin Ganewa	Rike Lokaci	Lokacin Tsayawa	St nd-byDim Level	Sensor Hasken Rana
Cikin gida	Yanayi1	100%	75%	5min	30min	30
Cikin gida	Yanayi2	100%	75%	1min	+ ku	3
Cikin gida	Yanayi3	100%	75%	mn	30min	30	30 LU
Waje	Yanayi4	100%	75%	1m	+ ku		(30LUX/300LUX)

Canja MODES:

1. danna Yanayin1/Yanayin2/Yanayin3/Yanayin4 button, da ramut Led Manuniya nuna data kasance sigogi.
2. danna UP KIBIYAR HAGU KASA KIBIYAR DAMA  don zaɓar sabbin sigogi.
3. Latsa OK don tabbatar da duk sigogi da adanawa a cikin yanayin.

KYAUTA Ayyukan upload yana ba ku damar saita firikwensin tare da duk sigogi a cikin aiki ɗaya. Kuna iya zaɓar sigogin saiti na YANZU ko MODE don lodawa.

Ana nuna sigogin saiti na yanzu ko MODE a cikin Ikon Nesa. Loda sigogi na yanzu zuwa firikwensin (s), kuma a kwafi sigogin firikwensin suna yin ɗaya zuwa juna

1. Latsa Watsawa button ko latsa Yanayin1/Yanayin2/Yanayin3/Yanayin4 Ana nuna duk sigogi a cikin Ikon Nesa.
   Lura: duba idan duk sigogi daidai ne, in ba haka ba, canza su.
2. Nufin firikwensin kuma latsa Aika maɓalli , hasken da firikwensin ya haɗa zai kasance a kunne/kashe kamar yadda tabbatarwa. Lura: idan wasu firikwensin suna buƙatar sigogi iri ɗaya, kawai nufa firikwensin kuma latsa Aika maballin.

Takardu / Albarkatu

NICOR H12VSENSOR Sensors Remote Programmer [pdf] Jagoran Jagora H12VSENSOR, H12VSENSOR Sensors Mai Shirye-shiryen Nesa, Mai Shirye-shiryen Nesa na Sensors, Mai Shirye-shiryen Nesa

Magana

• Manual mai amfani