HOBO TidbiT MX Temp 400 Temperate Data Logger

Bayanin samfur

Samfura	MX2203
Sunan samfur	HOBO TidbiT MX Temp Logger
Samfura	MX2204
Abubuwan Haɗe	Logger, abubuwan da ake buƙata, kayan haɗi
Rage Sensor Zazzabi	N/A
Daidaito	N/A
Ƙaddamarwa	N/A
Drift	N/A
Lokacin Amsa	N/A
Range Mai Aiki	N/A
Buoyancy (Sabon Ruwa)	N/A
Mai hana ruwa ruwa	N/A
Gano Ruwa	N/A
Rage watsa wutar lantarki	N/A
Matsakaicin Bayanin Mara waya	N/A
Rimar shiga	N/A
Daidaiton Lokaci	N/A
Baturi	N/A
Rayuwar Baturi	N/A
Ƙwaƙwalwar ajiya	N/A

Umarnin Amfani da samfur

Don amfani da HOBO TidbiT MX Temp Logger (samfurin MX2203 da aka nuna), da fatan za a bi matakan da ke ƙasa:

1. Tabbatar cewa kuna da duk abubuwan da ake buƙata da na'urorin haɗi sun haɗa cikin kunshin.
2. Cire logger daga marufi.
3. Karanta littafin samfurin sosai don fahimtar ƙayyadaddun bayanai da fasali.
4. Shirya logger don turawa bisa ga takamaiman buƙatun ku.
5. Sanya logger a wurin da ake so inda ake buƙatar rikodin ma'aunin zafin jiki.
6. Tabbatar cewa mai shigar da bayanan yana amintacce kuma ba zai damu ba yayin tattara bayanai.
7. Ƙaddamar da logger ta amfani da baturin da aka bayar ko tushen wutar lantarki.
8. Saita ƙimar shiga da ake so da daidaiton lokaci gwargwadon buƙatun ku na saka idanu.
9. Bada izini ga mai shiga ya yi aiki a cikin takamaiman kewayon aikinsa.
10. Dawo da logger bayan lokacin sa ido da ake so.
11. Zazzagewa da bincika bayanan da aka yi rikodi ta amfani da software ko kayan aiki masu jituwa.
12. Bi hanyoyin da suka dace don kiyayewa, maye gurbin baturi, da adana ma'ajiyar logger.

Da fatan za a koma zuwa cikakken jagorar samfurin don ƙarin umarni da bayanin matsala.

HOBO TidbiT MX Temp 400 Temperate Data Logger

Samfura:

• MX Temp 400 (MX2203)
• MX Temp 500 (MX2204)

Abubuwan sun haɗa da:

• Takalmin kariya

Abubuwan da ake buƙata:

• HOBOconnect app
• Na'urar hannu tare da Bluetooth da iOS, iPadOS®, ko Android™, ko kwamfutar Windows tare da adaftar BLE na asali ko tallafin BLE dongle

Na'urorin haɗi:

• garkuwar hasken rana (RS1 ko M-RSA) don MX2203
• Dogaro da shinge don garkuwar hasken rana (MX2200-RS-BRACKET), don amfani tare da ƙirar MX2203
• Maye gurbin O-ring (MX2203-ORING) don MX2203
• Takalma na maye gurbin duka samfuran a cikin launin toka (BOOT-MX220x-GR), baki (BOOT-MX220x-BK), ko fari (BOOT-MX220x-WH)

HOBO TidbiT MX Temp loggers suna auna zafin jiki a cikin rafuka, tafkuna, tekuna, wuraren zama na bakin teku, da mahallin ƙasa. An ajiye su a cikin takalmin kariya, waɗannan ƙwararrun katako an tsara su don tsawaita turawa a cikin ruwan gishiri ko ruwan gishiri a zurfin har zuwa 400 ft (MX2203) ko 5,000 ft (MX2204). Masu tsalle-tsalle suna amfani da Bluetooth® Low Energy (BLE) don sadarwa mara waya tare da waya, kwamfutar hannu, ko kwamfuta, kuma suna sanye da wani zaɓi na gano ruwa wanda ke kashe tallan Bluetooth ta atomatik lokacin da logger ya nutse cikin ruwa, yana kiyaye ƙarfin baturi. Yin amfani da manhajar HOBOconnect®, zaku iya daidaita masu yin katako cikin sauƙi, zazzage bayanan da aka shigar zuwa wayar hannu ko kwamfutarku, ko loda bayanan ta atomatik zuwa HOBOlink® don ƙarin bincike. Hakanan zaka iya saita masu yin katako don ƙididdige ƙididdiga, saita ƙararrawa don tafiya a takamaiman ƙofa, ko ba da damar fashe shiga ciki wanda aka shigar da bayanai cikin sauri lokacin da karatun firikwensin ya kasance sama ko ƙasa da takamaiman iyaka.

Ƙayyadaddun bayanai

Abubuwan Logger da Aiki

• Boot Kariya: Wannan murfin mai hana ruwa yana kare katako yayin turawa. Yana da shafuka masu hawa guda biyu da ginanniyar maganadisu don amfani da su tare da maɓalli na ciki na logger (duba Ƙaddamarwa da Dutsen Logger).
• Maɓallin Fara Magnetic: Wannan maballin yana aiki lokacin da mai shiga yana cikin takalmin kariya. Danna wannan maɓallin na tsawon daƙiƙa 3 don farawa ko dakatar da logger lokacin da aka saita shi don farawa ko dakatar da Maɓallin Maɓalli (duba Configuring the Logger). Danna wannan maɓallin na tsawon daƙiƙa 1 don tada mai shigar da bayanai (idan an saita shi da Bluetooth Kullum Kashe kamar yadda aka bayyana a Configuring Logger). Kuna iya buƙatar danna maɓallin a karo na biyu don tada mai shigar da gidan yanar gizon idan yana shiga kowane daƙiƙa 5 ko sauri kuma zafin jiki shine -10°C (14°F) ko ƙasa.
• Dutsen Tab: Yi amfani da shafukan da ke sama da kasa na logger don hawa shi (duba Ƙaddamarwa da Dutsen Logger).
• Reed Canja: Logger yana da maɓalli na ciki wanda ke wakilta ta ɗigon rektangulu akan logger. Ana amfani da maɓalli na reed tare da maɓallin maganadisu a cikin takalmin kariya. Lokacin da aka cire logger daga taya, magnet da aka sanya a kan maɓalli na reed na iya maye gurbin maɓallin ginannen ciki (duba Ƙaddamarwa da Dutsen Logger).
• Abubuwan Gano Ruwa: Wadannan sukurori guda biyu na iya gano gaban ruwa. Wannan yana ba ku damar saita mai shiga cikin yanayin ceton wutar lantarki wanda tallan Bluetooth ke aiki kawai lokacin da aka cire logger daga ruwa. Duba Haɓaka Logger don cikakkun bayanai. Lura: Mai shiga yana bincika kasancewar ruwa kowane daƙiƙa 15 lokacin da aka zaɓi yanayin ceton wutar Bluetooth Kashe Ruwa.
• Sensor Zazzabi: Na'urar firikwensin zafin jiki (ba a ganuwa a cikin zane) yana saman gefen dama na logger.
• Matsayi LED: Wannan LED ɗin yana ƙyalli kore kowane daƙiƙa 4 lokacin da mai shiga ya ke shiga (sai dai in Nuna LED ba a kashe kamar yadda aka bayyana a Tsarin Logger). Idan mai shiga yana jiran ya fara shiga saboda an saita shi don farawa A Button Push ko tare da jinkirin farawa, yana lumshe kore kowane sakan 8. Duk wannan LED ɗin da ƙararrawar ƙararrawa suna ƙiftawa sau ɗaya lokacin da ka danna maɓallin don tada logger ko ƙiftawa sau huɗu lokacin da ka danna maɓallin don farawa ko dakatar da shiga. Idan ka zaɓa a cikin app, duka LEDs suna haskakawa na daƙiƙa 5 (duba Farawa don ƙarin cikakkun bayanai).
• Ƙararrawa LED: Wannan LED ɗin yana ƙiftawa ja kowane daƙiƙa 4 lokacin da ƙararrawa ta katse (sai dai in Nuna LED ba a kashe kamar yadda aka bayyana a cikin Haɗa Logger).

Farawa

Shigar da HOBOconnect app don haɗawa da aiki tare da logger.

1. Zazzage HOBO haɗi zuwa waya ko kwamfutar hannu daga App Store® ko Google Play™.
   Zazzage app ɗin zuwa kwamfutar Windows daga www.onsetcomp.com/products/software/hoboconnect.
2. Buɗe app ɗin kuma kunna Bluetooth a cikin saitunan na'urar idan an sa.
3.  Idan wannan shine karo na farko da kuke amfani da logger, damƙa maballin fara maganadisu HOBO kusa da tsakiyar logger don tada shi. Ƙararrawa da LEDs matsayi suna ƙiftawa sau ɗaya lokacin da mai shiga ya tashi. Wannan kuma yana kawo mai yin logger zuwa saman jerin idan kuna aiki tare da masu tsalle-tsalle masu yawa.
4. Matsa na'urori sannan ka matsa tile mai shiga cikin app don haɗa shi.

Idan mai shigar da karar bai bayyana a lissafin ba ko kuma yana fuskantar matsalar haɗawa, bi waɗannan shawarwarin.

•  Idan an saita logger tare da Kashe Koyaushe na Bluetooth (duba Configuring Logger), a halin yanzu yana shiga cikin tazara mai sauri (daƙiƙa 5 ko sauri), kuma zafin jiki shine
• 10°C (14°F) ko ƙasa, ƙila ka buƙaci danna maɓallin sau biyu kafin ya bayyana a lissafin.
• Tabbatar cewa logger yana tsakanin kewayon na'urar hannu ko kwamfutarku. Matsakaicin nasarar sadarwar mara waya a cikin iska yana da kusan 30.5 m (100 ft) tare da cikakken layin gani.
• Canja yanayin yanayin na'urar ku don tabbatar da an nuna eriya zuwa ga mai shigar da shigar. Matsala tsakanin eriya a cikin na'urar da mai shigar da kaya na iya haifar da haɗin kai.
• Idan logger yana cikin ruwa kuma an saita shi tare da Bluetooth Off Water Detect, cire logger daga ruwan don haɗawa da shi.
• Idan na'urarka za ta iya haɗawa da mai shiga tsaka-tsaki ko ta rasa haɗin ta, matsa kusa da mai shiga, cikin gani idan zai yiwu. Idan logger yana cikin ruwa, haɗin zai iya zama marar aminci. Cire shi daga ruwa don daidaitaccen haɗi.
• Idan mai shiga ya bayyana a cikin ƙa'idar, amma ba za ka iya haɗawa da shi ba, rufe app ɗin sannan ka kashe na'urarka don tilasta haɗin Bluetooth ta baya.

Da zarar an haɗa logger ɗin, zaku iya:

Sabunta firmware akan logger. Ana kammala karatun logger ta atomatik a farkon aikin sabunta firmware.
Muhimmi: Kafin ka sabunta firmware akan mai katako, ka duba sauran batirin kuma ka tabbata bai gaza 30% ba. Tabbatar kuna da lokaci don kammala dukkan ayyukan sabuntawa, wanda ke buƙatar cewa mai katako ya kasance yana da alaƙa da na'urar yayin haɓakawa.

Ana saita Logger

Yi amfani da HOBOconnect app don saita logger, gami da zaɓar tazarar shiga, farawa da dakatar da zaɓin shiga, da daidaita ƙararrawa. Waɗannan matakan suna ba da ƙarewaview na saitin fasali. Don cikakkun bayanai, duba Jagorar Mai amfani na HOBOconnect.
Lura: Ƙayyade saitunan da ke da mahimmanci a gare ku. Latsa Fara a kowane lokaci don karɓar abubuwan da suka dace.

1. Idan a baya an saita logger tare da Bluetooth A kashe Koyaushe, danna maɓallin kan logger don tada shi. Idan a baya an saita logger tare da Bluetooth Off Water Detect kuma an tura shi cikin ruwa, cire shi daga ruwa. Idan kuna aiki tare da masu saje da yawa, danna maballin kuma yana kawo mai shiga zuwa saman jerin a cikin app.
2. Matsa Na'urori. Matsa tayal ɗin logger a cikin ƙa'idar don haɗa shi.
3. Matsa Sanya & Fara don saita logger.
4. Matsa Suna kuma rubuta suna don logger (na zaɓi). Idan baku shigar da suna ba, app ɗin yana amfani da lambar serial logger azaman sunan.
5. Matsa Ƙungiya don ƙara mai shiga cikin ƙungiya (na zaɓi). Matsa Ajiye.
6. Matsa Tazarar shiga kuma zaɓi yadda akai-akai mai shigar da bayanan ke rubuta bayanai sai dai idan yana aiki a cikin yanayin shiga fashe (duba Fashe Logging).
7. Matsa Fara shiga kuma zaɓi lokacin da aka fara shiga:
   •  Akan Ajiye. Shiga yana farawa nan da nan bayan an ajiye saitunan sanyi.
   • A Tazara ta Gaba. Shiga yana farawa a ko da tazara na gaba kamar yadda aka ƙaddara tazarar da aka zaɓa. Akan Maballin Tura. Shiga yana farawa da zarar ka danna maɓallin kan logger na tsawon daƙiƙa 3.
   • A Kwanan wata/Lokaci. Shiga yana farawa a kwanan wata da lokacin da kuka ƙayyade. Zaɓi Kwanan wata da lokaci.
8. Matsa Tsaida Shiga kuma saka lokacin da shiga ya ƙare.
   • Kada Ka Dakata (Ya Mayar da Tsohuwar Bayanai). Mai shigar da kaya baya tsayawa a kowane lokacin da aka kayyade. Mai shiga yana ci gaba da rikodin bayanai har abada, tare da sabbin bayanai suna sake rubuta mafi tsufa.
   • A Kwanan wata/Lokaci. Logger yana dakatar da shiga akan takamaiman kwanan wata da lokaci da ka ƙayyade.
   • Bayan. Zaɓi wannan idan kuna son sarrafa tsawon lokacin da mai shiga ya kamata ya ci gaba da shiga da zarar ya fara. Zaɓi adadin lokacin da kake son mai shigar da bayanai don shiga bayanai.
     Don misaliampDon haka, zaɓi kwanaki 30 idan kuna son mai shiga ya yi rajistar bayanan kwana 30 bayan an fara shiga.
     Tsaya Lokacin da Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwa ta Cika. Mai shiga yana ci gaba da rikodin bayanai har sai ƙwaƙwalwar ajiya ta cika.
9. Matsa Zaɓuɓɓukan Dakata, sannan zaɓi Dakatar da Maɓallin Tura don tantance cewa za ka iya dakatar da logger ta danna maɓallinsa na daƙiƙa 3.
10. Matsa Yanayin Shiga. Zaɓi ko dai Kafaffen ko Fashe shiga. Tare da ƙayyadaddun shiga, mai shiga yana yin rikodin bayanai don duk na'urorin firikwensin da aka kunna da/ko ƙididdiga da aka zaɓa a lokacin da aka zaɓa (duba Lissafin Lissafi don cikakkun bayanai kan zaɓin zaɓuɓɓukan ƙididdiga). A yanayin fashe, shiga yana faruwa a wani tazara na daban lokacin da ƙayyadadden yanayi ya cika. Duba Burst Logging don ƙarin bayani.
11. Kunna ko kashe Nuna LED. Idan Nuna LED ya ƙare, ƙararrawa da LEDs matsayi a kan logger ba su haskaka yayin shiga (LED ɗin ƙararrawa ba ya kiftawa idan ƙararrawa ta yi tafiya). Kuna iya kunna LEDs na ɗan lokaci lokacin da aka kashe Nuna LED ta latsa maɓallin logger na 1 seconds.
12. Zaɓi yanayin adana wutar lantarki, wanda ke ƙayyade lokacin da mai shiga ya yi talla ko aika siginar Bluetooth akai-akai don waya, kwamfutar hannu, ko kwamfuta don nemo ta hanyar app.
    • Bluetooth A kashe Koyaushe. Logger yana tallata kawai yayin shiga lokacin da ka danna maɓallin kan takalmin kariya (ko sanya magnetin inda maɓalli na reed yake idan mai shiga ya fita daga takalmin kariya). Wannan yana tayar da logger lokacin da kake buƙatar haɗawa da shi. Wannan zaɓi yana amfani da mafi ƙarancin ƙarfin baturi.
    • Bluetooth Kashe Ruwa Gane. Mai shiga ba ya tallata lokacin da aka gano kasancewar ruwa. Da zarar an cire logger daga cikin ruwa, tallace-tallace yana kunna kai tsaye, don haka baya buƙatar ka danna maɓalli (ko amfani da magnet) don tayar da logger lokacin da kake buƙatar haɗawa da shi. Wannan zaɓi yana adana wasu ƙarfin baturi. Lura: Mai shiga yana bincika kasancewar ruwa kowane daƙiƙa 15 lokacin da aka zaɓi wannan zaɓi.
    • Bluetooth Yana Kunna Koyaushe. Ma'aikacin kullun yana talla. Ba kwa buƙatar tura maɓalli (ko amfani da maganadisu) don tada mai logger. Wannan zaɓi yana amfani da mafi yawan ƙarfin baturi.
13. Saita ƙararrawa don yin tafiya lokacin da karatun firikwensin ya tashi sama ko ya faɗi ƙasa ƙayyadaddun ƙima. Duba Saita Ƙararrawa don cikakkun bayanai kan kunna ƙararrawar firikwensin.
14.  Matsa Fara don adana saitunan sanyi kuma fara shiga. Shiga yana farawa bisa saitunan da kuka zaɓa. Dubi Ƙaddamarwa da Haɗa Logger don cikakkun bayanai game da hawa kuma duba Karatun Logger don cikakkun bayanai kan zazzagewa.

Saita Ƙararrawa

Kuna iya saita ƙararrawa don logger ta yadda idan karatun firikwensin ya tashi sama ko ya faɗi ƙasa da ƙayyadaddun ƙima, ƙararrawar logger LED lumshe kuma alamar ƙararrawa ta bayyana a cikin app. Ƙararrawa suna faɗakar da ku ga matsaloli don ku iya ɗaukar matakin gyara.

Don saita ƙararrawa:

1. Matsa Na'urori. Idan an saita logger tare da kunna Bluetooth Koyaushe, danna maɓallin HOBOs akan logger don tashe shi. Idan an saita logger da Bluetooth Off Water Detect kuma a halin yanzu yana ƙarƙashin ruwa, cire shi daga ruwan.
2. Matsa tayal ɗin logger don haɗawa da shi kuma matsa Sanya & Fara.
3. Matsa firikwensin (matsa maɓallin Enable Logging idan ya cancanta).
4. Matsa Ƙararrawa don buɗe wannan yanki na allon.
5. Zaɓi Ƙananan don samun tafiyar ƙararrawa lokacin da karatun firikwensin ya faɗi ƙasa da ƙananan ƙimar ƙararrawa. Shigar da ƙima don saita ƙaramar ƙararrawa.
6. Zaɓi Babban don samun tafiyar ƙararrawa lokacin da karatun firikwensin ya tashi sama da babban ƙimar ƙararrawa. Shigar da ƙima don saita ƙararrawa babba.
7. Don Tsawon lokaci, zaɓi nawa ne lokacin da ya kamata ya wuce kafin ƙararrawar tafiye-tafiye kuma zaɓi ɗaya daga cikin masu zuwa:
   • Tari Ƙararrawa tana tafiya da zarar karatun firikwensin ya fita daga kewayon karɓuwa na lokacin da aka zaɓa kowane lokaci yayin shiga. Don misaliample, idan an saita babban ƙararrawa zuwa 85°F kuma an saita tsawon lokacin zuwa mintuna 30, to ƙararrawar tana tafiya da zarar karatun firikwensin ya kasance sama da 85°F na jimlar mintuna 30 tun lokacin da aka saita logger.
   • A jere. Ƙararrawar tana tafiya da zarar karatun firikwensin ya fita daga kewayon karɓuwa ci gaba da zaɓin lokacin da aka zaɓa. Don misaliample, an saita babban ƙararrawa zuwa 85 ° F kuma an saita tsawon lokaci zuwa mintuna 30; ƙararrawar tana tafiya ne kawai idan duk karatun firikwensin ya kasance 85°F ko sama don ci gaba da tsawon mintuna 30.
8.  A cikin saitunan saitin, zaɓi ɗaya daga cikin zaɓuɓɓuka masu zuwa don ƙayyade yadda ake share alamun ƙararrawa:
   • An sake saita Logger. Alamar ƙararrawa tana nunawa har zuwa lokaci na gaba da aka sake saita mai shiga.
   • Sensor a Iyaka. Alamar ƙararrawa tana nunawa har sai karatun firikwensin ya dawo zuwa kewayon al'ada tsakanin kowane ƙayyadaddun iyakokin ƙararrawa babba da ƙananan.

Lokacin da ƙararrawa yayi balaguro, ƙararrawar logger LED tana ƙiftawa kowane sakan 4 (sai dai in Nuna LED ba a kashe ba), alamar ƙararrawa tana bayyana a cikin ƙa'idar, kuma ana shigar da taron ƙararrawa. Yanayin ƙararrawa yana share lokacin da karatun ya dawo daidai idan kun zaɓi Sensor a Iyaka a mataki na 8. In ba haka ba, yanayin ƙararrawa yana nan a wurin har sai an sake saita mai shiga.

Bayanan kula:

• Mai shiga yana duba iyakar ƙararrawa a kowane tazarar shiga. Domin misaliampDon haka, idan an saita tazarar shiga zuwa mintuna 5, mai shigar da gidan yana duba karatun firikwensin akan saitin ƙararrawa babba da ƙaramar ku kowane minti 5.
• Haƙiƙan ƙimar don ƙimar ƙararrawa babba da ƙarami an saita su zuwa mafi ƙimar da mai goyan baya ke tallafawa. Ga tsohonample, ƙimar mafi kusa zuwa 85°F wanda mai shiga zai iya rikodin shine 84.990°F. Bugu da ƙari, ƙararrawa na iya yankewa ko share lokacin da karatun firikwensin ya kasance cikin ƙayyadaddun ƙayyadaddun ƙuduri.
• Lokacin da kuka zazzage bayanai daga mai shigar da bayanai, ana iya nuna abubuwan ƙararrawa akan maƙalar ko a cikin bayanan file. Duba Abubuwan Logger.

Fashewar Burst

Fashe katako yanayin shiga ne wanda ke ba ka damar saita mafi yawan yin rajista lokacin da aka cika ƙayyadadden yanayin. Domin misaliampHar ila yau, logger yana rikodin bayanai a cikin tazarar shiga na mintuna 5 kuma ana saita fashe shiga don shiga kowane sakan 30 lokacin da zafin jiki ya tashi sama da 85°F (mafi girman iyaka) ko ya faɗi ƙasa da 32°F (ƙananan iyaka). Wannan yana nufin mai shiga yana yin rikodin bayanai kowane minti 5 muddin yanayin zafi ya kasance tsakanin 85 ° F da 32 ° F. Da zarar zafin jiki ya tashi sama da 85 ° F, mai shiga yana canzawa zuwa saurin shiga cikin sauri kuma yana yin rikodin bayanai kowane sakan 30 har sai zafin jiki ya koma 85 ° F. A wannan lokacin, shiga sai a koma kowane minti 5 a ƙayyadaddun tazarar katako. Hakazalika, idan zafin jiki ya faɗi ƙasa da 32°F, mai shigar da gidan ya sake canzawa zuwa yanayin shiga ya sake yin rikodin bayanai kowane sakan 30. Da zarar zafin jiki ya tashi baya zuwa 32°F, mai shigar da karar zai dawo zuwa tsayayyen yanayin, yana shiga kowane minti 5. Lura: Ƙararrawa na firikwensin, ƙididdiga, da zaɓin Tsaya Login Kada Ka Dakata (Ya Sake Rubutun Tsohuwar Bayanai) ba su samuwa a cikin yanayin shiga fashe.

Don saita fashe fashe:

1. Matsa Na'urori. Idan an saita logger tare da kunna Bluetooth Koyaushe, danna maɓallin HOBOs akan logger don tashe shi. Idan an saita logger da Bluetooth Off Water Detect kuma a halin yanzu yana ƙarƙashin ruwa, cire shi daga ruwan.
2. Matsa tayal ɗin logger don haɗawa da shi kuma matsa Sanya & Fara.
3.  Matsa Yanayin Logging sannan ka matsa Fashe Logging.
4. Zaɓi Ƙananan da/ko Babban kuma rubuta ƙima don saita ƙananan matakan da/ko babba.
5. Saita tazarar fashewa, wanda dole ne yayi sauri fiye da tazarar katako. Ka tuna cewa saurin fashe fashe fashe, mafi girman tasiri akan rayuwar baturi kuma gajeriyar lokacin shiga. Saboda ana ɗaukar ma'aunai a lokacin fashewar shiga cikin lokacin aikin, amfani da baturi yayi kama da abin da zai kasance idan kun zaɓi wannan ƙimar don ƙayyadaddun tazarar shiga.

Bayanan kula:

• Ana duba iyakoki babba da ƙananan fashe a cikin tazarar tazarar tazarar katako ko mai shigar da shi yana cikin ƙayyadaddun yanayin fashe ko fashe. Domin misaliampHar ila yau, idan an saita tazarar tazarar zuwa sa'a 1 kuma an saita tazarar fashewa zuwa mintuna 10, ma'aikacin kullun yana bincika iyakar fashe kowane minti 10.
• Haƙiƙanin ƙimar fashe iyaka an saita su zuwa mafi kusancin ƙima wanda mai amfani ya goyan bayan. Bugu da kari, fashe fashe na iya farawa ko ƙare lokacin da karatun firikwensin ke cikin ƙayyadadden ƙuduri. Wannan yana nufin ƙimar da ke haifar da fashe katako na iya bambanta kaɗan fiye da ƙimar da aka shigar.
• Da zarar babban ko ƙaramar yanayin ya ƙare, ana ƙididdige lokacin shiga ta amfani da wurin bayanan da aka yi rikodin ƙarshe a cikin yanayin shiga fashe, ba madaidaicin bayanan da aka rubuta a ƙayyadadden ƙimar shiga ba. Domin misaliample, mai shiga yana da tazarar shiga ta mintuna 10 kuma ya shiga wurin bayanai a 9:05. Sa'an nan, babban iyaka ya wuce kuma an fara yin katako a karfe 9:06. Fashe shiga sannan ya ci gaba har zuwa 9:12 lokacin da karatun firikwensin ya faɗi baya ƙasa da babban iyaka. Yanzu an dawo cikin ƙayyadaddun yanayin, tazarar shiga ta gaba shine mintuna 10 daga wurin fashe na ƙarshe, ko 9:22 a wannan yanayin. Idan ba a sami fashe fashe ba, da mahimmin bayanai na gaba zai kasance a 9:15.
• Ana ƙirƙira sabon taron tazara duk lokacin da mai shiga ya shiga ko fita fashe yanayin shiga. Duba Abubuwan Logger don cikakkun bayanai kan ƙirƙira da viewshiga taron. Kari akan haka, idan an dakatar da logger tare da tura maɓallin yayin da yake cikin yanayin fashewar fashewa, to ana shigar da sabon taron Interval ta atomatik kuma an share yanayin fashewar, koda kuwa ainihin yanayin ko ƙanƙanin yanayin bai warware ba.

Shiga cikin kididdiga

A lokacin ƙayyadaddun shiga tazara, mai shiga yana yin rikodin bayanai don firikwensin zafin jiki da/ko ƙididdiga da aka zaɓa a lokacin da aka zaɓa. Ana ƙididdige ƙididdiga a kamarampAdadin da kuka ƙayyade tare da sakamakon sampling period da aka rubuta a kowane tazarar shiga. Ana iya shigar da ƙididdiga masu zuwa:

• Matsakaicin, ko mafi girma, sampjagoranci darajar
• Mafi ƙanƙanta, ko mafi ƙanƙanta, sampjagoranci darajar
• Matsakaicin duk sampjagoranci dabi'u
• Daidaitaccen daidaituwa daga matsakaita ga duk sampjagoranci dabi'u

Don misaliampHar ila yau, tazarar shiga shine mintuna 5. An saita yanayin shiga zuwa ƙayyadadden shiga tazara kuma an kunna duk kididdiga guda huɗu, kuma tare da ƙididdiga samptazarar dakika 30. Da zarar an fara shiga, mai shiga yana aunawa kuma yana yin rikodin ainihin ƙimar zafin jiki kowane minti 5. Bugu da kari, logger yana ɗaukar zafin jiki sample kowane sakan 30 kuma yana adana su na ɗan lokaci cikin ƙwaƙwalwar ajiya. Mai shigan sai ya ƙididdige matsakaicin, ƙarami, matsakaita, da daidaitaccen karkacewa ta amfani da sampLes tattara a cikin lokacin minti 5 da suka gabata kuma a shigar da ƙimar da aka samu. Lokacin zazzage bayanai daga mai shiga, wannan yana haifar da jerin bayanai guda biyar: jerin zafin jiki ɗaya (tare da bayanan da aka shigar kowane minti 5) tare da matsakaicin matsakaicin guda huɗu, mafi ƙaranci, matsakaita, da daidaitattun jeri (tare da ƙididdige ƙididdiga da shiga kowane minti 5 dangane da 30). - na biyu samplingin).

Don lissafin rajista:

1. Matsa Na'urori. Idan an saita logger tare da kunna Bluetooth Koyaushe, danna maɓallin HOBOs akan logger don tashe shi. Idan an saita logger da Bluetooth Off Water Detect kuma a halin yanzu yana ƙarƙashin ruwa, cire shi daga ruwan.
2. Matsa tayal ɗin logger a cikin ƙa'idar don haɗa shi kuma danna Sanya & Fara.
3. Matsa Yanayin Logging sannan zaɓi Kafaffen Logging Mode.
4. Matsa don kunna ƙididdiga.
   Lura: Kafaffen Yanayin Login yana rikodin ma'aunin firikwensin da aka ɗauka a kowane tazarar shiga. Zaɓuɓɓukan da kuka yi a cikin ɓangaren ƙididdiga suna ƙara ma'auni zuwa bayanan da aka yi rikodi.
5. Zaɓi kididdigar da kuke son mai shiga ya yi rikodi a kowane tazarar shiga: Maɗaukaki, Mafi ƙanƙanta, Matsakaici, da Madaidaicin Dabarar (ana kunna matsakaici ta atomatik lokacin zaɓar Madaidaicin Matsala). Ana shigar da ƙididdiga don duk na'urori masu auna firikwensin. Bugu da kari, yawan kididdiga da kuke yin rikodi, guntun lokacin logger kuma ana buƙatar ƙarin ƙwaƙwalwar ajiya.
6. Taɓa Ƙididdiga Sampling Interval kuma zaɓi ƙimar don amfani don ƙididdige ƙididdiga. Matsakaicin dole ne ya zama ƙasa da, kuma siffa na, tazarar shiga. Don misaliample, idan tazarar shiga ta minti 1 ne kuma ka zaɓi daƙiƙa 5 don sampling rate, to logger daukan 12 sampkarantawa tsakanin kowane tazarar shiga (daya sample kowane 5 seconds na minti daya) kuma yana amfani da 12 sampdon yin rikodin ƙididdiga da aka samu a kowane tazarar shiga na mintuna 1. Lura cewa saurin sampƙimar kuɗi, mafi girman tasirin rayuwar batir. Saboda ana ɗaukar ma'aunai a ƙididdigar sampTsawon lokacin lokacin aikin, amfani da baturi yayi kama da abin da zai kasance idan kun zaɓi wannan ƙimar don tazarar shiga ta al'ada.

Saita Kalmar wucewa

Kuna iya ƙirƙirar kalmar sirri da aka ɓoye don mai shiga wanda ake buƙata idan wata na'ura ta yi ƙoƙarin haɗi da ita. Ana ba da shawarar wannan don tabbatar da cewa ba'a dakatar da mai shigar da kaya cikin kuskure ba ko wasu sun canza shi da gangan. Wannan kalmar sirri tana amfani da algorithm na ɓoyayyen sirri wanda ke canzawa tare da kowace haɗi.

Don saita kalmar sirri:

1. Matsa Na'urori. Idan an saita logger tare da kunna Bluetooth Koyaushe, danna maɓallin HOBOs akan logger don tada shi. Idan an saita logger tare da Bluetooth Off Water Detect kuma a halin yanzu yana ƙarƙashin ruwa, cire shi daga ruwan.
2. Matsa Logger Logger.
3. Buga kalmar wucewa sannan ka matsa Saiti.

Na'urar da ake amfani da ita don saita kalmar sirri ne kawai za ta iya haɗawa da mai shiga ba tare da buƙatar shigar da kalmar sirri ba; dole ne ka yi amfani da kalmar sirri don haɗawa da logger tare da kowace na'ura. Domin misaliampto, idan ka saita kalmar sirri don logger tare da kwamfutar hannu sannan ka yi ƙoƙarin haɗawa da logger daga baya tare da wayarka, dole ne ka shigar da kalmar wucewa akan wayar amma ba tare da kwamfutar hannu ba. Hakazalika, idan wasu suka yi ƙoƙarin haɗawa da logger tare da na'urori daban-daban, suma dole ne su shigar da kalmar wucewa. Don sake saita kalmar sirri, danna maballin akan mai shiga na tsawon daƙiƙa 10 ko haɗa zuwa mai shiga kuma matsa Sarrafa kalmar wucewa kuma Sake saiti.

Zazzage bayanai Daga Ma'aikacin Logger
Don zazzage bayanai daga mai shiga:

1. Matsa Na'urori.
2. Idan an saita logger tare da Bluetooth Kullum A kunne, ci gaba zuwa mataki na 3.
   Idan an saita logger tare da Bluetooth A kashe Koyaushe, danna maɓallin kan logger na tsawon daƙiƙa 1 don tada shi.
   Idan an saita logger da Bluetooth Water Detect kuma an saka shi cikin ruwa, cire shi daga ruwan.
3. Matsa tile mai shiga cikin app don haɗa shi kuma danna Zazzage Data. Mai shiga yana zazzage bayanai zuwa waya, kwamfutar hannu, ko kwamfuta.
4. Lokacin fitarwa file An yi nasarar ƙirƙira, danna Anyi don komawa shafin da ya gabata ko kuma danna Share don amfani da hanyoyin raba na'urarka ta yau da kullun.

Hakanan zaka iya loda bayanai ta atomatik zuwa HOBOlink, Onset's web- tushen software, ta amfani da app ko ƙofar MX. Don cikakkun bayanai, duba Jagorar Mai amfani na HOBOconnect kuma duba taimakon HOBOlink don cikakkun bayanai kan aiki tare da bayanai a cikin HOBOlink.

Abubuwan Logger

Logger ɗin yana yin rikodin abubuwan da ke faruwa don bin diddigin ayyukan logger da matsayi. Za ka iya view abubuwan da ke faruwa a fitarwa files ko shirya abubuwan da suka faru a cikin app. Don tsara abubuwan da suka faru, matsa HOBO Files kuma zaþi a file budewa.
Taɓa (idan ya dace) sannan ka matsa . Zaɓi abubuwan da kuke son tsarawa kuma danna Ok.

Turawa da Haɗa logger
Bi waɗannan jagororin don turawa da hawan logger.

• Kuna iya tura logger ta amfani da shafuka masu hawa biyu akan takalmin kariya. Saka sukurori biyu ta cikin ramukan da ke kan shafuka masu hawa don liƙa gungumen zuwa saman fili. Saka igiyoyin igiyoyi ta cikin ramukan rectangular akan duka shafuka masu hawa biyu don haɗa igiya zuwa bututu ko sanda.
• Yi amfani da igiyar nailan ko wata kebul mai ƙarfi tare da kowane ramukan da ke kan shafuka masu hawa. Idan an yi amfani da waya don tabbatar da majingin, tabbatar da madauki na waya yana manne a ramukan. Duk wani rauni a cikin madauki na iya haifar da lalacewa da yawa.
• Lokacin turawa cikin ruwa, mai shinge ya kamata a auna shi da kyau, amintacce, da kariya dangane da yanayin ruwa da wurin aunawa da ake so.
• Idan Logger TidbiT MX Temp 500 (MX2203) za a fallasa ga hasken rana a wurin turawa, haɗa shi zuwa garkuwar hasken rana (RS1 ko M-RSA) ta amfani da madaidaicin garkuwar hasken rana (MX2200-RS-BRACKET). Haɗa logger zuwa ƙasan farantin hawa kamar yadda aka nuna. Don ƙarin cikakkun bayanai kan garkuwar hasken rana, duba Jagoran Shigar Garkuwan Radiation na Rana a www.onsetcomp.com/manuals/rs1.
• Yi hankali da kaushi. Bincika taswirar dacewa da kayan da jikakken kayan da aka jera a cikin Teburin Takaddun bayanai kafin tura mai shiga cikin wuraren da abubuwan da ba a gwada su ba suke. Logger na TidbiT MX Temp 500 (MX2203) yana da EPDM O-ring, wanda ke kula da kaushi na polar (acetone, keton), da mai.
• An ƙera takalmin kariya tare da maɓallin maganadisu wanda zai yi hulɗa tare da maɓalli na reed wanda ke cikin logger. Wannan yana nufin ba kwa buƙatar cire boot ɗin don farawa, tsayawa, ko tada mai shigar da karar (idan Akan Button Push ko Bluetooth Kashe Saitunan sanyi koyaushe). Idan ka cire logger daga taya ko kuma maɓallin maganadisu a cikin boot ɗin baya aiki da kyau, dole ne ka sanya magnet akan logger inda maɓalli na reed yake idan kana son farawa ko dakatar da logger tare da turawa ko farkawa. mai shiga. Bar maganadisu a wurin na tsawon daƙiƙa 3 don farawa ko dakatar da shi ko daƙiƙa 1 don tada shi.

Kula da logger

• Don tsaftace logger, cire logger daga taya. Kurkura duka katako da taya a cikin ruwan dumi. Yi amfani da sabulu mai laushi mai wanki idan ya cancanta. Kada a yi amfani da sinadarai masu tsauri, masu kaushi, ko abrasives.
• Bincika lokaci-lokaci don ƙwanƙwasa ƙwayar cuta idan an saka shi cikin ruwa da tsabta kamar yadda aka bayyana a sama.
• Lokaci-lokaci duba O-ring a cikin murfin baturin a cikin TidbiT MX Temp 400 (MX2203) logger don tsagewa ko hawaye kuma maye gurbinsa idan an gano wani (MX2203-ORING). Dubi Bayanin baturi don matakai kan maye gurbin O-ring.
• A lokaci-lokaci bincika takalmin don kowane tsagewa ko hawaye kuma maye gurbinsa idan ya cancanta (BOOT-MX220x-XX).

Kare logger
Lura: Wutar lantarki a tsaye na iya sa mai yin katako ya daina yin katako. An gwada logger zuwa 8 KV, amma guje wa fitar da wutar lantarki ta hanyar ƙasan kanku don kare logger. Don ƙarin bayani, bincika "fitarwa a tsaye" a kunne www.onsetcomp.com.

Bayanin Baturi

Mai shiga yana buƙatar baturin lithium CR2477 3V guda ɗaya (HRB-2477), wanda shine mai amfani-mai maye gurbinsa don TidbiT MX Temp 400 (MX2203) kuma wanda ba zai iya maye gurbinsa ba don TidbiT MX Temp 5000 (MX2204). Rayuwar baturi shekaru 3 ne, yawanci a 25°C (77°F) tare da tazarar shiga na minti 1 da Bluetooth Koyaushe A zaɓaɓɓun ko shekaru 5, yawanci a 25°C (77°F) lokacin da aka saita logger tare da Bluetooth Koyaushe. Kashewa ko Kashe Bluetooth An zaɓi Gano Ruwa. Rayuwar baturi da ake tsammani ya bambanta dangane da yanayin yanayin zafi inda aka tura mai shigar da logger, tazarar shiga, yawan haɗi, zazzagewa, da fage, da kuma amfani da yanayin fashe ko log ɗin ƙididdiga. Yin aiki a cikin tsananin sanyi ko zafi mai zafi ko tazarar shiga cikin sauri fiye da minti 1 na iya tasiri ga rayuwar baturi. Ƙididdiga ba su da garanti saboda rashin tabbas a yanayin baturi na farko da yanayin aiki.

Don maye gurbin baturi a cikin TidbiT MX Temp 400 (MX2203) logger:

1. Cire logger daga taya.
2. Yayin da ake turawa ƙasa a bayan logger, juya murfin a kan agogo. Idan murfin ku yana da gumakan makullai, juya shi don alamar ta motsa daga kulle zuwa matsayi a buɗe. Alamar da ba a buɗe ba za ta yi layi tare da tudu biyu a gefen akwati (an nuna a mataki na 3).
   
3. Yi amfani da ƙaramin shafin da ke murfin don ɗaga shi daga logger.
4. Cire baturin kuma sanya sabo a cikin mariƙin baturin, tabbataccen gefe yana fuskantar sama.
5. Duba O-ring akan murfin baturin. Tabbatar yana da tsabta kuma yana zaune da kyau. Cire duk wani datti, datti, gashi, ko tarkace daga O-ring. Idan O-ring yana da tsagewa ko hawaye, maye gurbinsa kamar haka:
   • Yada ƙaramin digo na man shafawa na siliki akan O-ring tare da yatsun hannu, tabbatar da cewa gabaɗayan saman O-ring ɗin an rufe shi da maiko.
   • Sanya O-ring akan murfin kuma tsaftace kowane tarkace. Tabbatar cewa zoben O-zoben ya cika zama kuma yana daidaitawa a cikin tsagi kuma baya tsukewa ko murɗawa. Wannan wajibi ne don kula da hatimin hana ruwa.
6. Sanya murfin baya akan logger, jera gunkin buɗewa (idan an zartar) tare da riji biyu a gefen akwati (wanda aka nuna a mataki na 3). Tabbatar cewa murfin ya yi daidai kamar yadda aka sanya shi a kan akwati don tabbatar da tashar baturi ta kiyaye matsayin da ya dace. Babban Sanya Murfin Baturi View
7. Yayin da ake turawa ƙasa a kan murfin, juya shi a kusa da agogo har sai shafin ya daidaita tare da riji biyu a cikin akwati na logger. Idan murfin ku yana da gumaka na kulle, to, juya shi don alamar ta motsa daga buɗewa zuwa matsayi a kulle. Lokacin da aka sanya murfin da kyau, shafin da gunkin da aka kulle (idan an zartar) za su daidaita tare da riji biyu a cikin logger kamar yadda aka nuna.
8. Sanya logger baya a cikin takalmin kariya, tabbatar da cewa riji biyu a cikin akwati na logger yana zamewa cikin tsagi a ciki. taya.

Lura: Ana nuna logger MX2203 a cikin tsohonample; tsagi a cikin taya akan logger na MX2204 yana cikin wani wuri daban.
GARGADI: Kada a yanke, ƙonewa, zafi sama da 85 ° C (185 ° F), ko sake cajin batirin lithium. Baturin na iya fashewa idan mai fitila ya fallasa ga matsanancin zafi ko yanayin da zai iya lalata ko lalata akwati. Kada a jefar da katako ko batir cikin wuta. Kada a bijirar da abin da ke cikin baturin zuwa ruwa. Jefa baturin bisa ƙa'idojin gida na baturan lithium.

Sanarwa Hukumar Sadarwa ta Tarayya

An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba a shigar da shi ba kuma aka yi amfani da shi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:

• Sake daidaitawa ko matsar da eriya mai karɓa
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako

Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
FCC Tsanaki: Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa wannan kayan aikin.

Bayanan Masana'antu Kanada
Wannan na'urar ta dace da ma'auni(s) na RSS na masana'antar Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. wannan na'urar bazai haifar da tsangwama ba, kuma
2. dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.

Don bin FCC da Masana'antar Kanada RF iyakokin watsawar radiyo ga yawan jama'a, dole ne a shigar da logger ɗin don samar da tazarar rarrabuwa na aƙalla 20cm daga duk mutane kuma kada ya kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.

Fassara:
Ba a yarda da sabis ɗin da ke da alaƙa da amincin ɗan adam ba saboda wannan na'urar na iya samun yuwuwar kutse ta rediyo.
1-508-759-9500 (Amurka da na Duniya)
1-800-LOGGERS (564-4377) (Amurka kawai)
www.onsetcomp.com/support/contact
© 2017–2022 Kamfanin Kwamfuta na Farko. An kiyaye duk haƙƙoƙi. Farawa, HOBO, TidbiT, Haɗin HOBO, da mahaɗin HOBO alamun kasuwanci ne masu rijista na Kamfanin Kwamfuta na Farko. App Store, iPhone, iPad, da iPadOS alamun sabis ne ko alamun kasuwanci masu rijista na Apple Inc. Android da Google Play alamun kasuwanci ne na Google LLC. Windows alamar kasuwanci ce mai rijista ta Microsoft Corporation. Bluetooth da Bluetooth Smart alamar kasuwanci ce mai rijista ta Bluetooth SIG, Inc. Duk sauran alamun kasuwanci mallakin kamfanoninsu ne.
Alamar lamba #: 8,860,569 21537-N

Takardu / Albarkatu

HOBO TidbiT MX Temp 400 Temperate Data Logger [pdf] Manual mai amfani MX2203, MX2204, TidbiT MX Temp 400, TidbiT MX Temp 400 Logger Data Logger

Magana

• Manual mai amfani