ESPRESSIF ESP32-S3-WROOM-1 Manual mai amfani da Module na Bluetooth

Saukewa: ESP32S3WROOM1
Saukewa: ESP32S3WROOM1U
Manual mai amfani

2.4 GHz WiFi (802.11 b/g/n) da Bluetooth5 (LE) module
Gina a kusa da jerin ESP32S3 na SoCs, Xtensa ® dualcore 32bit LX7 microprocessor
Flash har zuwa 16 MB, PSRAM har zuwa 8 MB
36 GPIOs, ɗimbin yawa na kayan aiki
Kan PCB eriya ko mai haɗa eriya ta waje

Abubuwan da ke ciki boye

6 Takardu masu alaƙa da albarkatu

7 Takardu / Albarkatu

7.1 Magana

8 Labarai masu alaka

Module Overview

1.1 Fasali

CPU da OnChip Memory

ESP32-S3 jerin SoCs da aka saka, Xtensa ® dual-core 32-bit LX7 microprocessor, har zuwa 240 MHz

384 KB ROM
512 KB SRAM

16 KB SRAM a cikin RTC
Har zuwa 8 MB PSRAM

WiFi

802.11 b/g/n

Bit rate: 802.11n har zuwa 150 Mbps
A-MPDU da A-MSDU tara

0.4 µs goyan bayan tazarar tsaro
Kewayon mitar cibiyar aiki: 2412 ~ 2462 MHz

Bluetooth

Bluetooth LE: Bluetooth 5, Bluetooth mesh

2 Mbps PHY
Yanayin dogon zango

Tsawaita talla
Saitin tallace-tallace da yawa

Algorithm zabin tashar #2

Na'urorin haɗi

GPIO, SPI, LCD dubawa, Kamara dubawa, UART, I2C, I2S, ramut, bugun jini counter, LED PWM, USB 1.1 OTG, USB Serial / JTAG mai sarrafawa, MCPWM, Mai watsa shiri SDIO, GDMA, TWAI ® mai sarrafawa (mai jituwa tare da ISO 11898-1), ADC, firikwensin taɓawa, firikwensin zafin jiki, masu ƙidayar lokaci da masu tsaro.

Abubuwan Haɗin Kan Module

40 MHz crystal oscillator
Har zuwa 16 MB SPI flash

Zaɓuɓɓukan Antenna

eriyar PCB a kan jirgi (ESP32-S3-WROOM-1)

eriyar waje ta hanyar mai haɗawa (ESP32-S3-WROOM-1U)

Yanayin Aiki

Ƙa'idar aikitage/Kayan wuta: 3.0 ~ 3.6 V
Yanayin yanayin aiki:
- 65 °C sigar: -40 ~ 65 °C
- 85 °C sigar: -40 ~ 85 °C
- 105 °C sigar: -40 ~ 105 °C
Girma: Duba Table 1

1.2 Bayani

ESP32-S3-WROOM-1 da ESP32-S3-WROOM-1U masu ƙarfi biyu ne, na'urorin Wi-Fi + Bluetooth LE MCU waɗanda aka gina a kusa da jerin ESP32-S3 na SoCs. A saman ɗimbin abubuwan da ke kewaye, haɓakar ƙididdigewar hanyar sadarwa ta jijiyoyi da ayyukan sarrafa siginar da SoC ke bayarwa ya sa samfuran su zama zaɓi mai kyau don yanayin yanayin aikace-aikacen iri-iri masu alaƙa da AI da Intelligence Intelligence of Things (IoT), kamar su. Gane kalmomin farkawa, gane umarnin magana, gano fuska, da kuma ganewa, gida mai kaifin baki, kayan aiki masu wayo, kwamitin kula da wayo, mai magana mai wayo, da sauransu.
ESP32-S3-WROOM-1 ya zo tare da eriyar PCB. ESP32-S3-WROOM-1U ya zo tare da haɗin eriya na waje. Zaɓuɓɓuka masu yawa na bambance-bambancen ƙirar suna samuwa ga abokan ciniki kamar yadda aka nuna a cikin Table 1. Daga cikin bambance-bambancen na'urorin, waɗanda aka saka ESP32-S3R8 suna aiki a -40 ~ 65 °C zafin jiki na yanayi, ESP32-S3-WROOM-1-H4 da ESP32-S3 -WROOM-1U-H4 aiki a -40 ~ 105 °C na yanayi zafin jiki, da sauran module bambance-bambancen karatu aiki a -40 ~ 85 °C na yanayi zafin jiki.

Tebur 1: Bayanin oda

Lambar oda	Chip Embedded	Flash (MB)	PSRAM (MB)	Girma (mm)
ESP32-S3-WROOM-1-N4	Saukewa: ESP32-S3	4	0	18 × 25.5 × 3.1
ESP32-S3-WROOM-1-N8	Saukewa: ESP32-S3	8	0
ESP32-S3-WROOM-1-N16	Saukewa: ESP32-S3	16	0
ESP32-S3-WROOM-1-H4 (105 °C)	Saukewa: ESP32-S3	4	0
ESP32-S3-WROOM-1-N4R2	Saukewa: ESP32-S3R2	4	2 (Quad SPI)
ESP32-S3-WROOM-1-N8R2	Saukewa: ESP32-S3R2	8	2 (Quad SPI)
ESP32-S3-WROOM-1-N16R2	Saukewa: ESP32-S3R2	16	2 (Quad SPI)
ESP32-S3-WROOM-1-N4R8 (65 °C)	Saukewa: ESP32-S3R8	4	8 (Octal SPI)
ESP32-S3-WROOM-1-N8R8 (65 °C)	Saukewa: ESP32-S3R8	8	8 (Octal SPI)
ESP32-S3-WROOM-1-N16R8 (65 °C)	Saukewa: ESP32-S3R8	16	8 (Octal SPI)
ESP32-S3-WROOM-1U-N4	Saukewa: ESP32-S3	4	0	18 × 19.2 × 3.2
ESP32-S3-WROOM-1U-N8	Saukewa: ESP32-S3	8	0
ESP32-S3-WROOM-1U-N16	Saukewa: ESP32-S3	16	0
ESP32-S3-WROOM-1U-H4 (105 °C)	Saukewa: ESP32-S3	4	0
ESP32-S3-WROOM-1U-N4R2	Saukewa: ESP32-S3R2	4	2 (Quad SPI)
ESP32-S3-WROOM-1U-N8R2	Saukewa: ESP32-S3R2	8	2 (Quad SPI)
ESP32-S3-WROOM-1U-N16R2	Saukewa: ESP32-S3R2	16	2 (Quad SPI)
ESP32-S3-WROOM-1U-N4R8 (65 °C)	Saukewa: ESP32-S3R8	4	8 (Octal SPI)
ESP32-S3-WROOM-1U-N8R8 (65 °C)	Saukewa: ESP32-S3R8	8	8 (Octal SPI)
ESP32-S3-WROOM-1U-N16R8 (65 °C)	Saukewa: ESP32-S3R8	16	8 (Octal SPI)

A ainihin kayan aikin shine ESP32-S3 jerin SoC *, Xtensa ® 32-bit LX7 CPU wanda ke aiki har zuwa 240 MHz. Kuna iya kashe CPU kuma ku yi amfani da mai haɗin gwiwa mai ƙarancin ƙarfi don saka idanu akai-akai don canje-canje ko ƙetare ƙofa.
ESP32-S3 yana haɗa ɗimbin yawa na abubuwan haɗin gwiwa ciki har da SPI, LCD, kyamarar kyamara, UART, I2C, I2S, iko mai nisa, injin bugun bugun jini, LED PWM, Serial USB / JTAG mai sarrafawa, MCPWM, Mai watsa shiri SDIO, GDMA, TWAI ® mai sarrafawa (mai jituwa tare da ISO 11898-1), ADC, firikwensin taɓawa, firikwensin zafin jiki, masu ƙidayar lokaci, da masu kallo, har zuwa 45 GPIOs. Hakanan ya haɗa da kebul na USB 1.1 On-The-Go (OTG) mai cikakken sauri don ba da damar sadarwar USB.

Lura:
* Don ƙarin bayani kan jerin ESP32-S3 na SoCs, da fatan za a koma zuwa ESP32-S3 Series Datasheet.

Ma'anar Pin

2.1 Fil Layout
Tsarin fil ɗin yana aiki don ESP32-S3-WROOM-1 da ESP32-S3-WROOM-1U, amma ƙarshen ba shi da yankin kiyayewa.

2.2 Bayanin Pin

Module ɗin yana da fil 41. Duba ma'anar fil a Tebu 2.
Don bayanin sunayen fil da sunayen aiki, da kuma daidaitawar fil ɗin, da fatan za a duba Takardar bayanan ESP32-S3

Tebur 2: Ma'anar Ma'anar Pin

Suna	A'a.	Nau'in ^a	Aiki
GND	1	P	GND
3V3	2	P	Tushen wutan lantarki
EN	3	I	High: a kunne, yana ba da damar guntu. Ƙananan: a kashe, guntu yana kashe wuta. Lura: Kar a bar fil ɗin EN yana yawo.
IO4	4	I/O/T	RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3
IO5	5	I/O/T	RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4
IO6	6	I/O/T	RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5
IO7	7	I/O/T	RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6
IO15	8	I/O/T	RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P
IO16	9	I/O/T	RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N
IO17	10	I/O/T	RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6
IO18	11	I/O/T	RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, CLK_OUT3
IO8	12	I/O/T	RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7, SUBSPICS1
IO19	13	I/O/T	RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D-
IO20	14	I/O/T	RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+
IO3	15	I/O/T	RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2
IO46	16	I/O/T	Farashin GPIO46
IO9	17	I/O/T	RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD, SUSPEND
IO10	18	I/O/T	RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIO4, SUBSPICS0
IO11	19	I/O/T	RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPID, FSPIO5, SUSPEND
IO12	20	I/O/T	RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPICLK, FSPIO6, SUBSPICLK
IO13	21	I/O/T	RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIQ, FSPIO7, SUBSPIQ
IO14	22	I/O/T	RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS, SUBSPIWP
IO21	23	I/O/T	RTC_GPIO21, GPIO21
IO47	24	I/O/T	SPICLK_P_DIFF, GPIO47, SUBSPICLK_P_DIFF
IO48	25	I/O/T	SPICLK_N_DIFF, GPIO48, SUBSPICLK_N_DIFF
IO45	26	I/O/T	Farashin GPIO45
IO0	27	I/O/T	RTC_GPIO0, GPIO0
IO35 ^b	28	I/O/T	SPIIO6, GPIO35, FSPID, SUBSPID
IO36 ^b	29	I/O/T	SPIIO7, GPIO36, FSPICLK, SUBSPICLK
IO37 ^b	30	I/O/T	SPIDQS, GPIO37, FSPIQ, SUBSPIQ
IO38	31	I/O/T	GPIO38, FSPIWP, SUBSPIWP
IO39	32	I/O/T	MTCK, GPIO39, CLK_OUT3, SUBSPICS1
IO40	33	I/O/T	MTDO, GPIO40, CLK_OUT2
IO41	34	I/O/T	MTDI, GPIO41, CLK_OUT1

Tebur na 2 - Contd daga shafin da ya gabata

Suna	A'a.	Nau'in ^a	Aiki
IO42	35	I/O/T	MTMS, GPIO42
Saukewa: RXD0	36	I/O/T	U0RXD, GPIO44, CLK_OUT2
MUX0	37	I/O/T	U0TXD, GPIO43, CLK_OUT1
IO2	38	I/O/T	RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1
IO1	39	I/O/T	RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0
GND	40	P	GND
KARANTA	41	P	GND

a P: wutar lantarki; I: shigar; O: fitarwa; T: high impedance. Ayyukan fil a cikin m font sune tsoffin ayyukan fil.
b A cikin bambance-bambancen na'urori waɗanda suka haɗa OSPI PSRAM, watau, waɗanda suka haɗa ESP32-S3R8, fil IO35, IO36, da IO37 suna haɗawa da OSPI PSRAM kuma ba su samuwa don wasu amfani.

Fara

3.1 Abin da kuke Bukata
Don haɓaka aikace-aikace na module ɗin kuna buƙatar:

1 x ESP32-S3-WROOM-1 ko ESP32-S3-WROOM-1U

1 x Espressif RF kwamitin gwaji
1 x USB-to-Serial allon
1 x Kebul na Micro-USB

1 x PC mai sarrafa Linux

A cikin wannan jagorar mai amfani, muna ɗaukar tsarin aiki na Linux azaman example. Don ƙarin bayani game da daidaitawa akan Windows da macOS, da fatan za a koma zuwa Jagorar Shirye-shiryen ESP-IDF.
3.2 Haɗin Hardware

Sayar da tsarin ESP32-S3-WROOM-1 ko ESP32-S3-WROOM-1U zuwa allon gwajin RF kamar yadda aka nuna a hoto 2.

Haɗa allon gwajin RF zuwa allon USB-zuwa-Serial ta TXD, RXD, da GND.
Haɗa allon USB-zuwa-Serial zuwa PC.
Haɗa allon gwajin RF zuwa PC ko adaftar wuta don ba da damar samar da wutar lantarki 5 V, ta kebul na Micro-USB.

Yayin zazzagewa, haɗa IO0 zuwa GND ta hanyar tsalle. Sannan, kunna “ON” allon gwaji.
Zazzage firmware cikin filasha. Don cikakkun bayanai, duba sassan da ke ƙasa.
Bayan zazzagewa, cire jumper akan IO0 da GND.

Ƙaddamar da allon gwajin RF kuma. Module ɗin zai canza zuwa yanayin aiki. Guntu zai karanta shirye-shirye daga walƙiya lokacin farawa.

Lura:
IO0 yana da ma'ana cikin ciki high. Idan an saita IO0 don cirewa, an zaɓi yanayin Boot. Idan wannan fil ɗin yana jan ƙasa ko hagu yana iyo, an zaɓi yanayin zazzagewa. Don ƙarin bayani akan ESP32-S3-WROOM-1 ko ESP32-S3-WROOM-1U, da fatan za a koma zuwa ESP32-S3 Series Datasheet.

3.3 Kafa Muhallin Ci Gaba
Tsarin Ci gaban Espressif IoT (ESP-IDF a takaice) tsari ne don haɓaka aikace-aikace dangane da Espressif ESP32. Masu amfani za su iya haɓaka aikace-aikace tare da ESP32-S3 a cikin Windows/Linux/macOS dangane da ESP-IDF. Anan muna ɗaukar tsarin aiki na Linux azaman example.
3.3.1 Shigar da Abubuwan da ake bukata
Don haɗa tare da ESP-IDF kuna buƙatar samun fakiti masu zuwa:

CentOS 7 & 8:
1 sudo yum -y sabuntawa && Sudo yum shigar git wget flex bison gperf python3 python3pip
2 python3-setuptools CMake ninja-gina ccache dfu-util busby
Ubuntu da Debian:
1 Sudo dace-samun shigar git wget flex bison gperf python3 python3-pip python3setuptools
2 cmake ninja-gina ccache life-dev libssl-dev dfu-util libusb-1.0-0
Arch:
1 sudo Pacman -S - bukata GCC git make flex bison gperf python-pip CMake ninja ccache 2 dfu-util libusb

Lura:

Wannan jagorar tana amfani da directory ~/esp akan Linux azaman babban fayil ɗin shigarwa don ESP-IDF.
Ka tuna cewa ESP-IDF baya goyan bayan sarari a cikin hanyoyi.

3.3.2 Sami EPIDF

Don gina aikace-aikacen ESP32-S3-WROOM-1 ko ESP32-S3-WROOM-1U, kuna buƙatar ɗakunan karatu na software da Espressif ya bayar a cikin ma'ajin ESP-IDF.
Don samun ESP-IDF, ƙirƙiri jagorar shigarwa (~/esp) don zazzage ESP-IDF zuwa kuma rufe ma'ajiyar tare da 'git clone':

mkdir -p ~/esp

cd ~/sa
git clone -recursive https://github.com/espressif/esp-idf.git

Za a sauke ESP-IDF zuwa ~/esp/esp-idf. Tuntuɓi Siffofin ESP-IDF don bayani game da wane ESP-IDF
version don amfani a cikin wani halin da ake ciki.
3.3.3 Saita Kayan aiki
Baya ga ESP-IDF, kuna buƙatar shigar da kayan aikin da ESP-IDF ke amfani da su, kamar masu tarawa, debugger, fakitin Python, da sauransu. ESP-IDF tana ba da rubutun mai suna 'install.sh' don taimakawa saita kayan aikin. a tafi daya.
1 cd ~/esp/esp-idf
2 ./install.sh

3.3.4 Saita Canjin Muhalli
Har yanzu ba a ƙara kayan aikin da aka shigar zuwa canjin yanayin PATH ba. Don yin amfani da kayan aikin daga layin umarni, dole ne a saita wasu masu canjin yanayi. ESP-IDF yana ba da wani fitarwar rubutun. sh' wanda yayi haka. A cikin tashar da za ku yi amfani da ESP-IDF, gudu:
1 . $HOME/esp/esp-IDF/export.sh
Yanzu komai yana shirye, zaku iya gina aikinku na farko akan ESP32-S3-WROOM-1 ko ESP32-S3-WROOM-1U module.

3.4 Ƙirƙiri Aikin Farko naku
3.4.1 Fara Aiki

Yanzu kun shirya don shirya aikace-aikacenku don ESP32-S3-WROOM-1 ko ESP32-S3-WROOM-1U.
Kuna iya farawa da farawa/hello_world aikin daga tsohonamples directory a cikin ESP-IDF.
Kwafi fara farawa/hello_world zuwa ~/esp directory:
1 cd ~/sa
2 cp -r $IDF_PATH/misaliamples/fara farawa/sannu_duniya.
Akwai kewayon example ayyukan a cikin exampLes directory a cikin ESP-IDF. Kuna iya kwafi kowane aiki kamar yadda aka gabatar a sama kuma ku gudanar da shi. Hakanan yana yiwuwa a gina examples a wurin, ba tare da kwafi su farko ba.
3.4.2 Haɗa na'urar ku
Yanzu haɗa na'urar ku zuwa kwamfutar kuma duba ƙarƙashin abin da ke cikin tashar tashar jiragen ruwa a bayyane. Serial ports a Linux suna farawa da '/ dev/TTY a cikin sunayensu. Gudun umarni a ƙasa sau biyu, na farko tare da cire allon, sannan tare da toshewa. Tashar da ke bayyana a karo na biyu ita ce wacce kuke buƙata:
1 l / dev/tty*

Lura:
Rike sunan tashar jiragen ruwa da amfani kamar yadda zaku buƙaci shi a matakai na gaba.

3.4.3 Sanya
Kewaya zuwa kundin adireshin ku na 'hello_world' daga Mataki 3.4.1. Fara aikin, saita guntu ESP32-S3 azaman maƙasudi, kuma gudanar da tsarin tsarin aikin 'menuconfig'.
1 cd ~/esp/hello_world
2 idf.py saita-manufa esp32s3
3 idf.py menuconfig
Saita manufa tare da 'idf.py set- target esp32s3' yakamata a yi sau ɗaya, bayan buɗe sabon aiki. Idan aikin ya ƙunshi wasu gine-ginen da aka gina da kuma daidaitawa, za a share su kuma a fara farawa. Ana iya ajiye manufa a cikin canjin yanayi don tsallake wannan matakin. Duba Zaɓin Makasudin don ƙarin bayani.
Idan matakan da suka gabata an yi su daidai, menu mai zuwa yana bayyana:

Kuna amfani da wannan menu don saita takamaiman canje-canjen aikin, misali sunan cibiyar sadarwar Wi-Fi da kalmar wucewa, saurin sarrafawa, da sauransu. Ana iya tsallake saita aikin tare da menuconfig don “hello_word”. Wannan example zai gudana tare da tsohowar saitin Launuka na menu na iya bambanta a tashar ku. Kuna iya canza kamanni tare da zaɓi '–style'. Da fatan za a gudanar da 'idf.py menuconfig -help don ƙarin bayani.
3.4.4 Gina Aikin
Gina aikin ta gudana:
1 idf.py ginawa
Wannan umarnin zai tattara aikace-aikacen da duk abubuwan ESP-IDF, sannan zai samar da bootloader, tebur na bangare, da binaries na aikace-aikacen.

1 $ idf.py ginawa
2 Gudun CMake a cikin directory /path/to/hello_world/build
3 Ana aiwatar da "CMake -G Ninja -warn-wanda ba a sani ba /hanyar/zuwa/hello_duniya"…
4 Gargaɗi game da ƙimar da ba a fara ba.
5 - An samo Git: /usr/bin/git (samfurin da aka samo "2.17.0")
6 - Gina fanko aws_iot saboda sanyi
7 - Sunayen abubuwan:…
8 - Hanyoyi masu mahimmanci:…
9
10… (ƙarin layukan fitarwa na tsarin gini)
11
12 [527/527] Samar da hello_world.bin
13 esptool.py v2.3.1
14
15 Ginin aikin ya cika. Don yin walƙiya, gudanar da wannan umarni:
16 ../.../../components/esptool_py/esptool/esptool.py -p (PORT) -b 921600
17 rubuta_flash –flash_mode dio –flash_size gano –flash_freq 40m
18 0x10000 gini/sannu_world.bin gina 0x1000 ginawa/bootloader/bootloader.bin 0x8000
19 gini/partition_table/partition-table.bin
20 ko gudu 'idf.py -p PORT flash'

Idan babu kurakurai, ginin zai ƙare ta hanyar samar da firmware binary .bin file.

3.4.5 Filashi a kan Na'urar

Finata binary ɗin da kuka gina a kan tsarin ku ta hanyar gudu:
1 idf.py -p PORT [-b BAUD] walƙiya
Sauya PORT da sunan tashar tashar jiragen ruwa na ESP32-S3 daga Mataki: Haɗa Na'urar ku.
Hakanan zaka iya canza ƙimar baud flasher ta maye gurbin BAUD tare da ƙimar baud ɗin da kuke buƙata. Adadin baud ɗin tsoho shine 460800.
Don ƙarin bayani kan muhawara idf.py, duba idf.py.

Lura:
Zaɓin 'flash' yana ginawa da walƙiya aikin ta atomatik, don haka gudanar da'idf.py gini' ba lallai bane.

Lokacin da walƙiya, za ku ga log ɗin fitarwa kamar haka:
1…
2 esptool.py esp32s3 -p /dev/ttyUSB0 -b 460800 –kafin=default_sake saitin –bayan =hard_sake saitin
3 write_flash –flash_mode dio –flash_freq 80m –flash_size 2MB 0x0 bootloader/bootloader.
bin
4 0x10000 hello_world.bin 0x8000 partition_table/partition-table.bin
5 esptool.py v3.2-dev
6 Serial tashar jiragen ruwa /dev/ttyUSB0
7 Haɗawa….
8 Chip shine ESP32-S3
9 fasali: WiFi, BLE
10 Crystal shine 40 MHz
11 MAC: 7c:df:a1:e0:00:64
12 Ana loda stub…
Mataki na 13…
14 Gudun tafiya…
15 Canza ƙimar baud zuwa 460800
16 An canza.
17 Yana daidaita girman walƙiya…
18 Flash za a goge daga 0x00000000 zuwa 0x00004fff…
19 Flash za a goge daga 0x00010000 zuwa 0x00039fff…
20 Flash za a goge daga 0x00008000 zuwa 0x00008fff…
21 An matsa 18896 bytes zuwa 11758…
22 Rubuta a 0x00000000… (100%)
23 Ya rubuta 18896 bytes (11758 matsa) a 0x00000000 a cikin daƙiƙa 0.5 (mai tasiri 279.9 kbit/s)
…
24 Hash na bayanai sun tabbatar.
25 An matsa 168208 bytes zuwa 88178…
26 Rubuta a 0x00010000… (16%)
27 Rubuta a 0x0001a80f… (33%)
28 Rubuta a 0x000201f1… (50%)
29 Rubuta a 0x00025dcf… (66%)
30 Rubuta a 0x0002d0be… (83%)
31 Rubuta a 0x00036c07… (100%)
32 An rubuta 168208 bytes (88178 matsa) a 0x00010000 a cikin daƙiƙa 2.4 (mai tasiri 569.2 kbit/s)
)…
33 Hash na bayanai sun tabbatar.
34 An matsa 3072 bytes zuwa 103…
35 Rubuta a 0x00008000… (100%)
36 Ya rubuta 3072 bytes (103 matsa) a 0x00008000 a cikin daƙiƙa 0.1 (tasirin 478.9 kbit/s)…
37 Hash na bayanai sun tabbatar.
38
39 Yana barin…
40 Hard sake saiti ta hanyar RTS fil…
41 Anyi

Idan babu matsala a ƙarshen aikin walƙiya, hukumar za ta sake yin aiki kuma ta fara aikace-aikacen "hello_world".

3.4.6 Saka idanu
Don bincika idan da gaske "hello_world" yana gudana, rubuta 'idf.py -p PORT Monitor' (Kada ku manta da maye gurbin PORT da sunan tashar tashar ku).
Wannan umarni yana ƙaddamar da aikace-aikacen IDF Monitor:
1 $ idf.py -p /dev/ttyUSB0 mai duba
2 Gudun idf_monitor a cikin directory […]/esp/hello_world/build
3 Ana aiwatar da ”python […]/esp-idf/tools/idf_monitor.py -b 115200
4 […]/esp/sannu_world/build/hello-world.elf”…
5 - idf_monitor akan /dev/ttyUSB0 115200 -
6 — Dakata: Ctrl+] | Menu: Ctrl+T | Taimako: Ctrl + T da Ctrl + H -
7 da Juni 8 2016 00:22:57
8
9 farko: 0x1 (POWERON_RESET), boot: 0x13 (SPI_FAST_FLASH_BOOT)
10 da Juni 8 2016 00:22:57
11…
Bayan farawa da rajistan ayyukan bincike gungura sama, yakamata ku ga "Hello duniya!" bugu daga aikace-aikacen.

1…
2 Sannu duniya!
3 Ana sake farawa a cikin daƙiƙa 10…
4 Wannan guntu ce ta esp32s3 tare da 2 CPU core (s), Wannan guntu ce ta esp32s3 tare da 2 CPU core (s), WiFi/BLE
,
5 silicon bita 0, 2MB filasha na waje
6 Mafi ƙarancin girman tsibi kyauta: 390684 bytes
7 Ana sake farawa a cikin daƙiƙa 9…
8 Ana sake farawa a cikin daƙiƙa 8…
9 Ana sake farawa a cikin daƙiƙa 7…

Don fita daga IDF duba yi amfani da gajeriyar hanya Ctrl+].
Wannan shine abin da kuke buƙatar farawa tare da ESP32-S3-WROOM-1 ko ESP32-S3-WROOM-1U module! Yanzu kai
sun shirya don gwada wasu tsohonampa cikin ESP-IDF, ko tafi daidai don haɓaka aikace-aikacen ku.

US FCC Bayanin

Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

Wannan na'urar bazai haifar da tsangwama mai cutarwa ba.
Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC.
An ƙirƙira waɗannan iyakoki don karewa da dacewa daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:

Sake daidaitawa ko matsar da eriya mai karɓa.
Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.

Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
Wannan kayan aikin ya cika FCC RF iyakokin fallasa hasken da aka tsara don yanayi mara sarrafawa. Wannan na'urar da eriya ba dole ne su kasance tare ko aiki tare da kowane eriya ko mai watsawa ba.
Dole ne a shigar da eriya da ake amfani da su don wannan mai watsawa don samar da nisa na aƙalla 20 cm daga duk mutane kuma dole ne a kasance tare da su ko aiki tare da kowane eriya ko mai watsawa.
Umarnin Haɗin Kan OEM
Anyi nufin wannan na'urar don masu haɗin OEM kawai a ƙarƙashin sharuɗɗan masu zuwa Za'a iya amfani da na'urar don girka a wani runduna. Dole ne a shigar da eriya kamar yadda ake kiyaye 20 cm tsakanin eriya da masu amfani, kuma ƙirar mai watsawa bazai kasance tare da kowane mai watsawa ko eriya ba. Za'a yi amfani da tsarin ne kawai tare da eriya (s) na haɗin gwiwa wanda aka gwada da asali tare da wannan tsarin. Muddin sharuɗɗa 3 da ke sama sun cika, ba za a buƙaci ƙarin gwajin watsawa ba. Koyaya, mai haɗin OEM har yanzu yana da alhakin gwada samfuran ƙarshen su don kowane ƙarin yarda da buƙatun da aka shigar (don tsohonample, watsawar na'urar dijital, abubuwan buƙatun PC, da sauransu)

Sanarwa:
A yayin da waɗannan sharuɗɗan ba za a iya cika su ba (misaliampwasu ƙayyadaddun tsarin kwamfutar tafi-da-gidanka ko wurin haɗin gwiwa tare da wani mai watsawa), to, izinin FCC na wannan ƙirar a hade tare da kayan aikin ba a sake ɗaukar inganci kuma ba za a iya amfani da ID na FCC na module ɗin akan samfurin ƙarshe ba. A cikin waɗannan yanayi, mai haɗin OEM zai kasance alhakin sake kimanta samfurin ƙarshe (ciki har da mai watsawa) da samun izini na FCC daban.

Ƙarshen Lakabin Samfura
An ba da izinin wannan tsarin mai watsawa kawai don amfani a cikin na'urori inda za'a iya shigar da eriya ta yadda za'a iya kiyaye 20 cm tsakanin eriya da masu amfani. Dole ne a yi wa samfurin ƙarshe lakabi a wurin da ake iya gani tare da mai zuwa: "Ya ƙunshi ID na FCC: 2AC7Z-ESPS3WROOM1".

Bayanin IC

Wannan na'urar tana bin RSS mara lasisin masana'antar Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

Wannan na'urar bazai haifar da tsangwama ba; kuma

Dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.

Bayanin Bayyanar Radiation
Wannan kayan aikin ya dace da iyakokin fiddawa na IC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 20 cm tsakanin radiyo & jikin ku.
Sashen RSS247 6.4 (5)
Na'urar na iya dakatar da watsawa ta atomatik idan babu bayanin don watsawa ko gazawar aiki. Lura cewa ba a yi nufin hana hana watsa bayanai ko sigina ko amfani da lambobin maimaitawa inda fasaha ke buƙata ba.
Anyi nufin wannan na'urar don masu haɗin OEM kawai a ƙarƙashin sharuɗɗan masu zuwa: (Don amfanin na'urar)

Dole ne a shigar da eriya kamar yadda aka kiyaye 20 cm tsakanin eriya da masu amfani, da

Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.
Muddin sharuɗɗa 2 na sama sun cika, ba za a buƙaci ƙarin gwaje-gwajen watsawa ba. Koyaya, mai haɗin OEM har yanzu yana da alhakin gwada samfuran ƙarshen su don kowane ƙarin buƙatun yarda da ake buƙata tare da shigar da wannan ƙirar.

MUHIMMAN NOTE:
A yayin da waɗannan sharuɗɗan ba za a iya cika su ba (misaliampwasu saitunan kwamfutar tafi-da-gidanka ko haɗin gwiwa tare da wani mai watsawa), to, izinin Kanada ba a ɗauka yana aiki kuma ba za a iya amfani da ID na IC akan samfurin ƙarshe ba. A cikin waɗannan yanayi, mai haɗin OEM zai kasance da alhakin sake kimanta ƙarshen
samfur (ciki har da mai watsawa) da samun izinin Kanada daban.

Bayanin Manual Zuwa Ƙarshen Mai Amfani
Dole ne mai haɗin OEM ya sani kar ya ba da bayani ga mai amfani na ƙarshe game da yadda ake girka ko cire wannan ƙirar RF a cikin littafin jagorar ƙarshen samfurin wanda ya haɗa wannan ƙirar. Littafin jagorar mai amfani na ƙarshe zai haɗa da duk bayanan tsari da ake buƙata / faɗakarwa kamar yadda aka nuna a cikin wannan jagorar.

Takardu masu alaƙa da albarkatu

Takardu masu alaƙa

Takardar bayanan ESP32-S3 - Takaddun bayanai na kayan aikin ESP32-S3.

ESP32-S3 Manual Reference Technical – Cikakken bayani kan yadda ake amfani da ƙwaƙwalwar ESP32-S3 da maɓalli.
ESP32-S3 Ka'idojin Zane Hardware - Sharuɗɗa kan yadda ake haɗa ESP32-S3 cikin samfuran kayan aikin ku.
Takaddun shaida
http://espressif.com/en/support/documents/certificates

Sabunta Takardu da Sabunta Kuɗin Sanarwa
http://espressif.com/en/support/download/documents

Yankin Mai Haɓakawa

Jagorar Shirye-shiryen ESP-IDF don ESP32-S3 - Takaddun da yawa don tsarin ci gaban ESP-IDF.

ESP-IDF da sauran tsarin ci gaba akan GitHub.
http://github.com/espressif
Dandalin ESP32 BBS - Injiniya-zuwa Injiniya (E2E) Community don samfuran Espressif inda zaku iya aika tambayoyi, raba ilimi, bincika ra'ayoyi, da kuma taimakawa warware matsaloli tare da injiniyoyin abokan aiki.
http://esp32.com/
Jaridar ESP - Mafi kyawun Ayyuka, Labarai, da Bayanan kula daga mutanen Espressif.
http://blog.espressif.com/

Duba shafuka SDKs da Demos, Apps, Tools, AT Firmware.
http://espressif.com/en/support/download/sdks-demos

Kayayyaki

ESP32-S3 Series SoCs - Bincika ta duk ESP32-S3 SoCs.
http://espressif.com/en/products/socs?id=ESP32-S3

ESP32-S3 Series Modules – Bincika ta duk tushen ESP32-S3.
http://espressif.com/en/products/modules?id=ESP32-S3
ESP32-S3 Series DevKits – Bincika ta duk ESP32-S3 na tushen devkits.
http://espressif.com/en/products/devkits?id=ESP32-S3
Zaɓin Samfurin ESP – Nemo samfurin kayan masarufi na Espressif wanda ya dace da buƙatun ku ta kwatanta ko amfani da tacewa.
http://products.espressif.com/#/product-selector?language=en

Tuntube Mu

Dubi shafuka Tambayoyin Talla, Tambayoyin Fasaha, Tsarin Da'ira & Tsarin PCB Review, samu Samples (Kantinan Kan layi), Kasance Mai Bayar Mu, Sharhi & Shawarwari.
http://espressif.com/en/contact-us/sales-questions

Tarihin Bita

Kwanan wata	Sigar	Bayanan sanarwa
10/29/2021	v0.6	Sabunta gabaɗaya don bitar guntu 1
7/19/2021	v0.5.1	Sakin farko, don bitar guntu 0

www.espressif.com

Sanarwa da Haƙƙin mallaka
Bayani a cikin wannan takarda, gami da URL nassoshi, ana iya canzawa ba tare da sanarwa ba.
DUK BAYANIN JAM'IYYA NA UKU A CIKIN WANNAN TAKARDUN ANA BADA KAMAR YADDA BABU WARRANCI GA GASKIYA DA INGANTACCEN SA.
BABU WARRANTI DA AKA BAYAR DA WANNAN TAKARDON DON SAMUN SANUNSA, RA'AYIN TSINUWA, KO KWANTA GA KOWANE MUSAMMAN MANUFAR, KUMA BABU WANI Garantin da ya fito daga kowane Shawara, BAYANI, BAYANI, BAYANIAMPLE.
Duk wani abin alhaki, gami da abin alhaki na keta duk wani haƙƙoƙin mallaka, wanda ya shafi amfani da bayanai a cikin wannan takaddar ba a musanta ba. Babu wani lasisi da aka bayyana ko bayyana, ta estoppel ko akasin haka, ga kowane haƙƙin mallakar fasaha da aka bayar anan.
Alamar Memba ta Wi-Fi Alliance alamar kasuwanci ce ta Wi-Fi Alliance. Tambarin Bluetooth alamar kasuwanci ce mai rijista ta Bluetooth SIG.
Duk sunayen kasuwanci, alamun kasuwanci, da alamun kasuwanci masu rijista da aka ambata a cikin wannan takaddar mallakin masu su ne kuma an yarda dasu.
Pre-saki v0.6 Haƙƙin mallaka
© 2022 Espressif Systems (Shanghai) Co., Ltd. Duk haƙƙin mallaka.

Takardu / Albarkatu

ESPRESSIF ESP32-S3-WROOM-1 Bluetooth Module [pdf] Manual mai amfani
ESP32- S3- WROOM -1, ESP32 -S3 -WROOM -1U, Bluetooth Module, ESP32- S3- WROOM -1 Bluetooth Module

Magana

Manual mai amfani