ESP32S3WROOM1
Chithunzi cha ESP32S3WROOM1U
Buku Logwiritsa Ntchito 

2.4 GHz WiFi (802.11 b/g/n) ndi Bluetooth5 (LE) gawo
Zomangidwa mozungulira ESP32S3 mndandanda wa SoCs, Xtensa ® dualcore 32bit LX7 microprocessor
Kuwala mpaka 16 MB, PSRAM mpaka 8 MB
36 GPIOs, zotumphukira zambiri
Mlongoti wa PCB wapaboard kapena cholumikizira chakunja cha mlongoti

Module Yathaview

1.1 Zosintha

CPU ndi OnChip Memory

• ESP32-S3 mndandanda wa ma SoC ophatikizidwa, Xtensa ® wapawiri-core 32-bit LX7 microprocessor, mpaka 240 MHz
• Mtengo wa 384 KB
• 512 KB SRAM
• 16 KB SRAM mu RTC
• Mpaka 8 MB PSRAM

Wifi

• 802.11 b/g/n
• Pang'ono: 802.11n mpaka 150 Mbps
• A-MPDU ndi A-MSDU kuphatikiza
• 0.4 µs chithandizo chanthawi yayitali
• Center pafupipafupi osiyanasiyana njira ntchito: 2412 ~ 2462 MHz

bulutufi

• Bluetooth LE: Bluetooth 5, Bluetooth mesh
• 2 Mbps PHY
• Mtundu wautali
• Zowonjezera zotsatsa
• Zotsatsa zingapo
• Njira yosankha njira #2

Zotumphukira

• GPIO, SPI, mawonekedwe a LCD, mawonekedwe a kamera, UART, I2C, I2S, chowongolera chakutali, pulse counter, LED PWM, USB 1.1 OTG, USB seri/JTAG controller, MCPWM, SDIO host, GDMA, TWAI ® controller (yogwirizana ndi ISO 11898-1), ADC, sensor sensor, sensor ya kutentha, zowerengera nthawi ndi agalu

Zowonjezera Zowonjezera pa Module

• 40 MHz crystal oscillator
• Kufikira 16 MB SPI flash

Zosankha za Antenna

• Mlongoti wa PCB (ESP32-S3-WROOM-1)
• Mlongoti wakunja kudzera pa cholumikizira (ESP32-S3-WROOM-1U)

Kagwiritsidwe Ntchito

• Opaleshoni voltage/Mphamvu: 3.0 ~ 3.6 V
• Kutentha kozungulira:
  -65 °C mtundu: -40 ~ 65 °C
  -85 °C mtundu: -40 ~ 85 °C
  -105 °C mtundu: -40 ~ 105 °C
• Makulidwe: Onani Table 1

1.2 Kufotokozera

ESP32-S3-WROOM-1 ndi ESP32-S3-WROOM-1U ndi ma module awiri amphamvu, amtundu wa Wi-Fi + Bluetooth LE MCU omwe amamangidwa mozungulira ESP32-S3 mndandanda wa SoCs. Pamwamba pa zotumphukira zambiri, kuthamangitsa kwa neural network computing ndi ma sign processing ntchito zoperekedwa ndi SoC kumapangitsa ma module kukhala chisankho chabwino pamitundu yosiyanasiyana yogwiritsira ntchito yokhudzana ndi AI ndi Artificial Intelligence of Things (IoT), monga kuzindikira mawu, kuzindikira mawu olankhulidwa, kuzindikira nkhope, ndi kuzindikira, nyumba yanzeru, zida zanzeru, gulu lowongolera mwanzeru, zokamba zanzeru, ndi zina zambiri.
ESP32-S3-WROOM-1 imabwera ndi mlongoti wa PCB. ESP32-S3-WROOM-1U imabwera ndi cholumikizira chakunja cha mlongoti. Mitundu yosiyanasiyana ya ma module ikupezeka kwa makasitomala monga momwe zasonyezedwera mu Table 1. Pakati pamitundu yosiyanasiyana, ESP32-S3R8 yophatikizidwa imagwira ntchito pa -40 ~ 65 °C kutentha kozungulira, ESP32-S3-WROOM-1-H4 ndi ESP32-S3 -WROOM-1U-H4 imagwira ntchito pa -40 ~ 105 °C kutentha kozungulira, ndi mitundu ina ya module imagwira ntchito pa -40 ~ 85 °C kutentha kozungulira.

Gulu 1: Zambiri Zoyitanitsa

Pakatikati pa ma modules ndi ESP32-S3 mndandanda wa SoC *, Xtensa ® 32-bit LX7 CPU yomwe imagwira ntchito mpaka 240 MHz. Mutha kuzimitsa CPU ndikugwiritsa ntchito purosesa yamphamvu yotsika kuti muyang'ane zotumphukira kuti zisinthe kapena kuwoloka zipata.
ESP32-S3 imaphatikiza zotumphukira zambiri kuphatikiza SPI, LCD, mawonekedwe a Kamera, UART, I2C, I2S, chiwongolero chakutali, pulse counter, LED PWM, USB seri/JTAG controller, MCPWM, SDIO host, GDMA, TWAI ® controller (yogwirizana ndi ISO 11898-1), ADC, sensor sensor, sensor ya kutentha, timer, ndi agalu, komanso mpaka 45 GPIOs. Zimaphatikizanso mawonekedwe a USB 1.1 On-The-Go (OTG) othamanga kwambiri kuti athe kulumikizana ndi USB.

Zindikirani:
* Kuti mumve zambiri za mndandanda wa ESP32-S3 wa SoCs, chonde onani ESP32-S3 Series Datasheet.

Pin Tanthauzo

2.1 Mapangidwe a Pin
Chithunzi cha pini chimagwira ntchito pa ESP32-S3-WROOM-1 ndi ESP32-S3-WROOM-1U, koma chomalizacho chilibe malo osungira.

2.2 Kufotokozera kwa Pin

Module ili ndi mapini 41. Onani matanthauzo a pini mu Table 2.
Pamafotokozedwe a mayina a pini ndi mayina ogwirira ntchito, komanso masanjidwe a ma pini am'mphepete, chonde onani Zithunzi za ESP32-S3

Gulu 2: Tanthauzo la Pini

Tebulo 2 - kuchokera patsamba lapitalo

a P: magetsi; Ine: kulowa; O: zotsatira; T: high impedance. Pin ntchito mu zilembo zolimba ndizo ntchito za pini zokhazikika.
b M'mitundu yosiyanasiyana ya ma module yomwe yayika OSPI PSRAM, mwachitsanzo, yomwe imayika ESP32-S3R8, mapini IO35, IO36, ndi IO37 amalumikizana ndi OSPI PSRAM ndipo sapezeka kuti agwiritse ntchito zina.

Yambanipo

3.1 Zomwe Mukufuna
Kuti mupange mapulogalamu a module muyenera:

• 1 x ESP32-S3-WROOM-1 kapena ESP32-S3-WROOM-1U
• 1 x Espressif RF test board
• 1 x USB-to-Serial board
• Chingwe cha 1 x Micro-USB
• 1 x PC yomwe ili ndi Linux

Mu bukhuli la ogwiritsa ntchito, timatenga makina opangira a Linux ngati akaleample. Kuti mumve zambiri za kasinthidwe ka Windows ndi macOS, chonde onani ESP-IDF Programming Guide.
3.2 Kulumikizana kwa Hardware

1.  Solder ESP32-S3-WROOM-1 kapena ESP32-S3-WROOM-1U gawo ku bolodi yoyesera ya RF monga momwe tawonetsera pa Chithunzi 2.
2. Lumikizani bolodi yoyesera ya RF ku bolodi ya USB-to-Serial kudzera pa TXD, RXD, ndi GND.
3. Lumikizani bolodi la USB-to-Serial ku PC.
4. Lumikizani bolodi yoyesera ya RF ku PC kapena chosinthira mphamvu kuti muthe kutulutsa mphamvu ya 5 V, kudzera pa chingwe cha Micro-USB.
5. Mukatsitsa, lumikizani IO0 ku GND kudzera pa jumper. Kenako, tsegulani bolodi yoyeserera "YABANI".
6. Tsitsani firmware mu flash. Kuti mudziwe zambiri, onani zigawo pansipa.
7. Mukatsitsa, chotsani jumper pa IO0 ndi GND.
8. Yambitsaninso bolodi yoyesera ya RF. Module idzasinthira kumayendedwe ogwirira ntchito. Chipchi chidzawerenga mapulogalamu kuchokera ku flash poyambitsa.

Zindikirani:
IO0 ndi yokwera kwambiri mkati. Ngati IO0 yakhazikitsidwa kuti ikoke, njira ya Boot imasankhidwa. Ngati pini iyi ikukokera pansi kapena kumanzere ikuyandama, njira yotsitsa imasankhidwa. Kuti mudziwe zambiri za ESP32-S3-WROOM-1 kapena ESP32-S3-WROOM-1U, chonde onani ESP32-S3 Series Datasheet.

3.3 Khazikitsani Chitukuko Chitukuko
Espressif IoT Development Framework (ESP-IDF mwachidule) ndi chimango chopangira mapulogalamu potengera Espressif ESP32. Ogwiritsa ntchito amatha kupanga mapulogalamu ndi ESP32-S3 mu Windows/Linux/macOS kutengera ESP-IDF. Apa timatenga Linux opaleshoni dongosolo ngati wakaleample.
3.3.1 Ikani Zofunikira
Kuti muphatikize ndi ESP-IDF muyenera kupeza maphukusi awa:

• CentOS 7 & 8:
  1 sudo yum -y kusintha && Sudo yum kukhazikitsa git wget flex njati gperf python3 python3pip
  2 python3-setuptools CPangani ninja-build ccache dfu-util busby
• Ubuntu ndi Debian:
  1 Sudo apt-get kukhazikitsa git wget flex bison gperf python3 python3-pip python3setuptools 
  2 cmake ninja-build ccache life-dev libssl-dev dfu-util libusb-1.0-0
• Arch:
  1 sudo Pacman -S -yofunikira GCC git imapanga njati yosinthika gperf python-pip CPangani ninja ccache 2 dfu-util libusb

Zindikirani:

• Bukuli limagwiritsa ntchito chikwatu ~/esp pa Linux ngati chikwatu chokhazikitsa ESP-IDF.
• Kumbukirani kuti ESP-IDF sichirikiza mipata m'njira.

3.3.2 Pezani ESPDF

Kuti mupange mapulogalamu a gawo la ESP32-S3-WROOM-1 kapena ESP32-S3-WROOM-1U, mufunika malaibulale apulogalamu operekedwa ndi Espressif munkhokwe ya ESP-IDF.
Kuti mupeze ESP-IDF, pangani chikwatu choyika ( ~/esp) kuti mutsitse ESP-IDF ndikusintha chosungiracho ndi 'git clone':

1. mkdir -p ~/esp
2. cd ~/esp
3.  git clone -recursive https://github.com/espressif/esp-idf.git

ESP-IDF idzatsitsidwa ku ~/esp/esp-idf. Onani Mabaibulo a ESP-IDF kuti mudziwe za ESP-IDF
mtundu woti mugwiritse ntchito munthawi inayake.
3.3.3 Konzani Zida
Kupatula ESP-IDF, muyeneranso kukhazikitsa zida zogwiritsidwa ntchito ndi ESP-IDF, monga compiler, debugger, Python phukusi, etc. ESP-IDF imapereka malemba otchedwa 'install.sh' kuti athandize kukhazikitsa zida. mu kupita kumodzi.
1 cd ~/esp/esp-idf
2 ./install.sh

3.3.4 Konzani Zosintha Zachilengedwe
Zida zomwe zayikidwa sizinawonjezedwe ku PATH chilengedwe variable. Kuti zida zigwiritsidwe ntchito kuchokera pamzere wolamula, zosintha zina za chilengedwe ziyenera kukhazikitsidwa. ESP-IDF imaperekanso zolemba zina. sh' zomwe zimachita zimenezo. Pa terminal komwe mugwiritsa ntchito ESP-IDF, thamangani:
1 . $HOME/esp/esp-IDF/export.sh
Tsopano zonse zakonzeka, mutha kupanga polojekiti yanu yoyamba pa gawo la ESP32-S3-WROOM-1 kapena ESP32-S3-WROOM-1U.

3.4 Pangani Ntchito Yanu Yoyamba
3.4.1 Yambitsani Ntchito

Tsopano mwakonzeka kukonzekera gawo la ESP32-S3-WROOM-1 kapena ESP32-S3-WROOM-1U.
Mutha kuyamba ndi pulojekiti yoyambira/hello_world kuchokera zakaleamples directory mu ESP-IDF.
Koperani zoyambira/hello_world ku ~/esp chikwatu:
1 cd ~/esp
2 cp -r $IDF_PATH/examples/get-start/hello_world .
Pali mndandanda wa exampma project mu examples directory mu ESP-IDF. Mutha kukopera projekiti iliyonse monga momwe tafotokozera pamwambapa ndikuyendetsa. Ndizothekanso kupanga exampm'malo mwake, popanda kuwatengera poyamba.
3.4.2 Lumikizani Chipangizo Chanu
Tsopano gwirizanitsani gawo lanu ku kompyuta ndikuyang'ana pansi pa doko lachinsinsi lomwe gawoli likuwonekera. Madoko a seri mu Linux amayamba ndi '/dev/TTY m'maina awo. Thamangani lamulo ili m'munsimu kawiri, choyamba ndi bolodi osamangika, kenako ndi plugged. Doko lomwe likuwoneka kachiwiri ndi lomwe mukufuna:
1 ls /dev/tty*

Zindikirani:
Sungani dzina ladoko lili pafupi momwe mudzalifunire pamasitepe otsatirawa.

3.4.3 Konzani
Yendetsani ku chikwatu chanu cha 'hello_world' kuchokera pa Gawo 3.4.1. Yambitsani Pulojekiti, ikani ESP32-S3 chip ngati chandamale, ndikuyendetsa ntchito yosinthira projekiti 'menuconfig'.
1 cd ~/esp/hello_world
2 idf.py set-target esp32s3
3 idf.py menyuconfig
Kukhazikitsa chandamale ndi 'idf.py set-target esp32s3' kuyenera kuchitika kamodzi, mutatsegula pulojekiti yatsopano. Ngati polojekitiyo ili ndi zomanga ndi zosintha zomwe zilipo kale, zidzachotsedwa ndikukhazikitsidwa. Zolinga zitha kusungidwa mukusintha kwachilengedwe kuti mudumphe sitepe iyi. Onani Kusankha Chandamale kuti mudziwe zambiri.
Ngati masitepe am'mbuyomu adachitidwa bwino, menyu wotsatira akuwoneka:

Mukugwiritsa ntchito menyuyi kukhazikitsa zosintha zantchito, mwachitsanzo dzina la netiweki ya Wi-Fi ndi mawu achinsinsi, liwiro la purosesa, ndi zina zambiri. Kukhazikitsa pulojekiti ndi menuconfig mwina kudumpha kuti "hello_word". Ex iziample idzayenda ndi kasinthidwe kosasintha Mitundu ya menyu ikhoza kukhala yosiyana mu terminal yanu. Mutha kusintha mawonekedwe ndi kusankha '–style'. Chonde thamangani 'idf.py menuconfig -help kuti mudziwe zambiri.
3.4.4 Mangani Ntchitoyi
Pangani polojekitiyo poyendetsa:
1 idf.py kumanga
Lamuloli liphatikiza pulogalamuyo ndi zida zonse za ESP-IDF, kenako lipanga chojambulira, tebulo la magawo, ndi ma binaries.

1 $ idf.py kumanga
2 Kuthamanga CMake mu chikwatu /path/to/hello_world/build
3 Kuchita "CMake -G Ninja -warn-uninitialized /path/to/hello_world"...
4 Chenjezani za zinthu zomwe sizinayambike.
5 - Git Yopezeka: /usr/bin/git (yomwe yapezeka "2.17.0")
6 - Kumanga chigawo cha aws_iot chopanda kanthu chifukwa cha kasinthidwe
7 - Mayina azinthu: ...
8 - Njira zamagulu: ...
9
10 ... (mizere yambiri yopangira makina opangira)
11
12 [527/527] Kupanga hello_world.bin
13 esptool.py v2.3.1
14
15 Ntchito yomanga yatha. Kuti muwale, yesani lamulo ili:
16 ../../../components/esptool_py/esptool/esptool.py -p (PORT) -b 921600
17 kulemba_flash -flash_mode dio -flash_size kuzindikira -flash_freq 40m
18 0x10000 build/hello_world.bin pangani 0x1000 build/bootloader/bootloader.bin 0x8000
19 build/partition_table/partition-table.bin
20 kapena kuthamanga 'idf.py -p PORT flash'

Ngati palibe zolakwika, kumangako kudzatha popanga firmware binary .bin file.

3.4.5 Kung'anima pa Chipangizo 

Onetsani ma binaries omwe mwangomanga pa module yanu poyendetsa:
1 idf.py -p PORT [-b BAUD] kung'anima
Bwezerani PORT ndi dzina la doko la ESP32-S3 kuchokera pa Gawo: Lumikizani Chipangizo Chanu.
Mutha kusinthanso kuchuluka kwa baud posintha BAUD ndi kuchuluka komwe mukufuna. Mtengo wokhazikika wa baud ndi 460800.
Kuti mumve zambiri pazokangana za idf.py, onani idf.py.

Zindikirani:
Kusankha 'flash' kumangopanga ndikuwunikira pulojekitiyo, kotero kuyendetsa 'idf.py build' sikofunikira.

Mukawunikira, mudzawona chipika chofanana ndi ichi:
1…
2 esptool.py esp32s3 -p /dev/ttyUSB0 -b 460800 -before=default_reset -after=hard_reset
3 write_flash -flash_mode dio -flash_freq 80m -flash_size 2MB 0x0 bootloader/bootloader.
bin
4 0x10000 hello_world.bin 0x8000 partition_table/partition-table.bin
5 esptool.py v3.2-dev
6 doko /dev/ttyUSB0
7 Zogwirizana….
8 Chip ndi ESP32-S3
Zinthu 9: WiFi, BLE
10 Crystal ndi 40MHz
11 MAC: 7c:df:a1:e0:00:64
12 Kutsitsa masamba…
13 Njira yothamanga…
14 Kuthamanga kwamphamvu…
15 Kusintha kwa baud kukhala 460800
16 Zasinthidwa.
17 Kukonza kukula kwa flash…
18 Flash idzachotsedwa pa 0x00000000 mpaka 0x00004fff…
19 Flash idzachotsedwa pa 0x00010000 mpaka 0x00039fff…
20 Flash idzachotsedwa pa 0x00008000 mpaka 0x00008fff…
21 Woponderezedwa 18896 mabayiti mpaka 11758…
22 Kulemba pa 0x00000000… (100 %)
23 Analemba 18896 mabayiti (11758 opanikizidwa) pa 0x00000000 mu masekondi 0.5 (mogwira 279.9 kbit/s)
…
24 Hash ya data yotsimikizika.
25 Woponderezedwa 168208 mabayiti mpaka 88178…
26 Kulemba pa 0x00010000… (16 %)
27 Kulemba pa 0x0001a80f… (33 %)
28 Kulemba pa 0x000201f1… (50 %)
29 Kulemba pa 0x00025dcf… (66 %)
30 Kulemba pa 0x0002d0be… (83 %)
31 Kulemba pa 0x00036c07… (100 %)
32 Analemba 168208 mabayiti (88178 wothinikizidwa) pa 0x00010000 mu masekondi 2.4 (yogwira 569.2 kbit/s
)…
33 Hash ya data yotsimikizika.
34 Woponderezedwa 3072 mabayiti mpaka 103…
35 Kulemba pa 0x00008000… (100 %)
36 Inalemba 3072 byte (103 yopanikizidwa) pa 0x00008000 mu masekondi 0.1 (yogwira 478.9 kbit/s)…
37 Hash ya data yotsimikizika.
38
39 Kuchoka…
40 Kukhazikitsanso mwamphamvu kudzera pa RTS pin…
41 Wachita

Ngati palibe zovuta pakutha kwa kung'anima, bolodi idzayambiranso ndikuyamba ntchito ya "hello_world".

3.4.6 Woyang'anira
Kuti muwone ngati "hello_world" ikuyendadi, lembani 'idf.py -p PORT monitor' (Osaiwala kusintha PORT ndi dzina lanu la doko).
Lamuloli likuyambitsa pulogalamu ya IDF Monitor:
1 $ idf.py -p /dev/ttyUSB0 polojekiti
2 Kuthamanga idf_monitor mu chikwatu […]/esp/hello_world/build
3 Kuchita "python [...]/esp-idf/tools/idf_monitor.py -b 115200
4 […]/esp/hello_world/build/hello-world.elf”…
5 - idf_monitor pa /dev/ttyUSB0 115200 -
6 - Siyani: Ctrl+] | Menyu: Ctrl+T | Thandizo: Ctrl+T wotsatiridwa ndi Ctrl+H
7 ndi Jun 8 2016 00:22:57
8
9 koyambira:0x1 (POWERON_RESET), boot:0x13 (SPI_FAST_FLASH_BOOT)
10 ndi Jun 8 2016 00:22:57
11…
Pambuyo poyambira ndi zolemba zowunikira, muyenera kuwona "Moni dziko!" zosindikizidwa ndi pulogalamuyi.

1…
2 Moni dziko!
3 Ikuyambiranso mumasekondi 10…
4 Ichi ndi chip esp32s3 chokhala ndi 2 CPU core(s), Ichi ndi chip esp32s3 chokhala ndi 2 CPU core(ma), WiFi/BLE
,
5 silicon kukonzanso 0, 2MB kunja kung'anima
6 Kukula kochepa kwa mulu waulere: 390684 mabayiti
7 Ikuyambiranso mumasekondi 9…
8 Ikuyambiranso mumasekondi 8…
9 Ikuyambiranso mumasekondi 7…

Kuti mutuluke pakuwunika kwa IDF gwiritsani ntchito njira yachidule Ctrl+].
Ndizo zonse zomwe mukufunikira kuti muyambe ndi gawo la ESP32-S3-WROOM-1 kapena ESP32-S3-WROOM-1U! Pano inu
ndi okonzeka kuyesa wina wakaleamples mu ESP-IDF, kapena pitani kumanja kuti mupange mapulogalamu anu.

Chiwonetsero cha US FCC

Chipangizochi chikugwirizana ndi Gawo 15 la Malamulo a FCC. Kugwira ntchito kumadalira zinthu ziwiri izi:

• Chipangizochi sichingawononge zosokoneza.
• Chipangizochi chiyenera kuvomereza kusokonezedwa kulikonse komwe kulandidwa, kuphatikiza kusokoneza komwe kungayambitse ntchito yosafunikira.

Zipangizozi zayesedwa ndipo zapezeka kuti zikugwirizana ndi malire a chipangizo cha digito cha Gulu B, motsatira Gawo 15 la Malamulo a FCC.
Malire awa adapangidwa kuti aziteteza moyenera ku kusokonezedwa kowopsa pakuyika nyumba. Chipangizochi chimapanga, chimagwiritsa ntchito, komanso chimatha kuwunikira mphamvu zamawayilesi ndipo, ngati sichinayikedwe ndi kugwiritsidwa ntchito motsatira malangizo, chikhoza kusokoneza mawayilesi. Komabe, palibe chitsimikizo kuti kusokoneza sikudzachitika mu unsembe winawake. Ngati chida ichi chikuyambitsa kusokoneza koyipa kwa wailesi kapena kulandila wailesi yakanema, komwe kungadziwike ndikuzimitsa ndi kuyatsa zida, wogwiritsa ntchitoyo akulimbikitsidwa kuyesa kusokoneza ndi chimodzi mwazinthu izi:

• Yankhanitsaninso kapena sinthani mlongoti wolandira.
• Wonjezerani kulekana pakati pa zida ndi wolandila.
• Lumikizani chipangizocho munjira yosiyana ndi yomwe wolandila amalumikizidwa.
• Funsani wogulitsa kapena wodziwa ntchito pa wailesi/TV kuti akuthandizeni.

Kusintha kulikonse kapena kusintha komwe sikunavomerezedwe mwachindunji ndi gulu lomwe limayang'anira kutsata kungathe kulepheretsa wogwiritsa ntchito kugwiritsa ntchito zidazo.
Chida ichi chikugwirizana ndi malire a FCC RF owonetsera ma radiation omwe akhazikitsidwa kumalo osalamulirika. Chipangizochi ndi mlongoti wake siziyenera kukhala pamodzi kapena kugwira ntchito limodzi ndi mlongoti wina uliwonse kapena chopatsilira.
Tinyanga zomwe zimagwiritsidwa ntchito popatsira izi ziyenera kuyikidwa kuti zipereke mtunda wolekanitsa wa 20 cm kuchokera kwa anthu onse ndipo sayenera kukhala pamalo amodzi kapena kugwira ntchito limodzi ndi mlongoti wina uliwonse kapena chotumizira.
OEM Integration Malangizo
Chipangizochi chimapangidwira ophatikizira a OEM pokhapokha pazifukwa zotsatirazi Gawoli lingagwiritsidwe ntchito kukhazikitsa mu gulu lina. Mlongoti uyenera kuyikidwa kuti 20 cm ikhalebe pakati pa mlongoti ndi ogwiritsa ntchito, ndipo gawo la transmitter silingakhale limodzi ndi chotumizira china chilichonse kapena mlongoti. Gawoli lidzagwiritsidwa ntchito ndi mlongoti wofunikira womwe udayesedwa koyambirira ndikutsimikiziridwa ndi gawoli. Malingana ngati zinthu zitatu zomwe zili pamwambapa zakwaniritsidwa, kuyezetsanso ma transmitter sikudzafunikanso. Komabe, chophatikizira cha OEM chikadali ndi udindo woyesa zomwe apeza kuti akwaniritse zofunikira zina zilizonse zomwe zayikidwa ndi gawoli (kwa mtsogolo.ample, kutulutsa kwachipangizo cha digito, zofunikira za PC zotumphukira, ndi zina zotero)

Zindikirani:
Ngati izi sizingakwaniritsidwe (mwachitsanzoample kasinthidwe ka laputopu kapena malo ogwirizana ndi chotumizira china), ndiye kuti chilolezo cha FCC cha gawoli kuphatikiza ndi zida zogwirira ntchito sikulinso koyenera ndipo ID ya FCC ya module singagwiritsidwe ntchito pomaliza. Zikatero, chophatikiza cha OEM chidzakhala ndi udindo wowunikanso zomwe zatsirizidwa (kuphatikiza chotumizira) ndikupeza chilolezo cha FCC.

Malizitsani Kulemba Zamalonda
Gawo la transmitter iyi ndi lololedwa kuti ligwiritsidwe ntchito pazida zomwe mlongoti ungayikidwe kotero kuti 20 cm ikhoza kusungidwa pakati pa mlongoti ndi ogwiritsa ntchito. Chomaliza chomaliza chiyenera kulembedwa pamalo owonekera ndi awa: "Muli FCC ID: 2AC7Z-ESPS3WROOM1".

Chithunzi cha IC

Chipangizochi chimagwirizana ndi laisensi ya Industry Canada-exept RSS. Kugwira ntchito kumadalira zinthu ziwiri izi:

•  Chipangizochi sichikhoza kuyambitsa kusokoneza; ndi
• Chipangizochi chiyenera kuvomereza kusokonezedwa kulikonse, kuphatikizapo kusokoneza komwe kungayambitse ntchito yosayenera ya chipangizocho.

Chidziwitso Chokhudzana ndi Ma radiation
Chida ichi chimagwirizana ndi malire a IC radiation exposure yokhazikitsidwa pamalo osalamulirika. Zidazi ziyenera kuyikidwa ndikugwiritsidwa ntchito ndi mtunda wochepera 20 cm pakati pa radiator ndi thupi lanu.
RSS247 Gawo 6.4 (5)
Chipangizocho chimatha kusiya kufalitsa ngati kulibe chidziwitso chofalitsa kapena kugwiranso ntchito. Dziwani kuti izi sizolinga zoletsa kufalitsa kapena kuwonetsa chidziwitso kapena kugwiritsa ntchito manambala obwereza komwe kufunikira ndi ukadaulo.
Chipangizochi chimapangidwira ophatikiza a OEM okha pamikhalidwe iyi: (Kugwiritsa ntchito gawo la chipangizo)

• Mlongoti uyenera kukhazikitsidwa kotero kuti 20 cm imasungidwa pakati pa mlongoti ndi ogwiritsa ntchito, ndi
• Gawo la transmitter silingakhale limodzi ndi ma transmitter kapena mlongoti wina uliwonse.
  Malingana ngati zinthu zitatu zomwe zili pamwambapa zakwaniritsidwa, kuyezetsa kwina kwa ma transmitter sikudzafunikanso. Komabe, chophatikizira cha OEM chikadali ndi udindo woyesa zomwe apeza kumapeto kwa zofunikira zilizonse zofunika pakuyika gawoli.

ZOFUNIKA KWAMBIRI:
Ngati izi sizingakwaniritsidwe (mwachitsanzoampndi masanjidwe ena a laputopu kapena kusanjidwa ndi chotumizira china), ndiye kuti chilolezo cha Canada sichikuwonekanso chovomerezeka ndipo IC ID singagwiritsidwe ntchito pomaliza. Muzochitika izi, wophatikiza wa OEM adzakhala ndi udindo wowunikanso mapeto
mankhwala (kuphatikiza transmitter) ndikupeza chilolezo chosiyana cha Canada.

Malizitsani Kulemba Zamalonda
Gawo la transmitter iyi ndi lololedwa kuti ligwiritsidwe ntchito pazida zomwe mlongoti ungayikidwe kotero kuti 20 cm ikhoza kusungidwa pakati pa mlongoti ndi ogwiritsa ntchito. Chomaliza chomaliza chiyenera kulembedwa pamalo owonekera ndi awa: "Muli IC: 21098-ESPS3WROOM1".

Zambiri Zamanja Kwa Wogwiritsa Ntchito Mapeto
Wophatikizira wa OEM akuyenera kudziwa kuti asapereke zambiri kwa wogwiritsa ntchito momwe angayikitsire kapena kuchotsa gawo la RF mu bukhu la wogwiritsa ntchito la chomaliza chomwe chimaphatikiza gawoli. Bukhuli likhala ndi zonse zofunikira pakuwongolera / chenjezo monga momwe zasonyezedwera m'bukuli.

Zolemba Zogwirizana ndi Zothandizira

Zolemba Zogwirizana

• ESP32-S3 Series Datasheet - Zofotokozera za hardware ya ESP32-S3.
• Buku la ESP32-S3 Technical Reference Manual - Zambiri zamomwe mungagwiritsire ntchito kukumbukira kwa ESP32-S3 ndi zotumphukira.
• ESP32-S3 Maupangiri a Hardware - Malangizo amomwe mungaphatikizire ESP32-S3 muzogulitsa zanu za Hardware.
• Zikalata
  http://espressif.com/en/support/documents/certificates
• Zosintha Zolemba ndi Kulembetsa Zidziwitso Zosintha
  http://espressif.com/en/support/download/documents

Developer Zone

• ESP-IDF Programming Guide ya ESP32-S3 - Zolemba zambiri zachitukuko cha ESP-IDF.
• ESP-IDF ndi zina zachitukuko pa GitHub.
  http://github.com/espressif
• ESP32 BBS Forum - Gulu la Engineer-to-Engineer (E2E) lazinthu za Espressif komwe mungathe kutumiza mafunso, kugawana nzeru, kufufuza malingaliro, ndikuthandizira kuthetsa mavuto ndi mainjiniya anzanu.
  http://esp32.com/
• Magazini ya ESP - Zochita Zabwino Kwambiri, Zolemba, ndi Zolemba zochokera kwa anthu a Espressif.
  http://blog.espressif.com/
• Onani ma SDKs ndi Demos, Mapulogalamu, Zida, AT Firmware.
  http://espressif.com/en/support/download/sdks-demos

Zogulitsa 

• ESP32-S3 Series SoCs - Sakatulani ma ESP32-S3 SoCs onse.
  http://espressif.com/en/products/socs?id=ESP32-S3
• Ma module a ESP32-S3 - Sakatulani ma module onse a ESP32-S3.
  http://espressif.com/en/products/modules?id=ESP32-S3
• ESP32-S3 Series DevKits - Sakatulani ma devkits onse a ESP32-S3.
  http://espressif.com/en/products/devkits?id=ESP32-S3
• ESP Product Selector - Pezani chida cha Espressif choyenera pazosowa zanu pofanizira kapena kugwiritsa ntchito zosefera.
  http://products.espressif.com/#/product-selector?language=en

Lumikizanani nafe

• Onani ma tabu Mafunso Ogulitsa, Mafunso Aukadaulo, Circuit Schematic & PCB Design Review, Pezani Samples (Masitolo apaintaneti), Khalani Opereka Zathu, Ndemanga & Malingaliro.
  http://espressif.com/en/contact-us/sales-questions

Mbiri Yobwereza 

www.espressif.com 

Chodzikanira ndi Chidziwitso cha Copyright
Zambiri mu chikalata ichi, kuphatikizapo URL maumboni, akhoza kusintha popanda chidziwitso.
ZINSINSI ZONSE ZA CHIGAWO CHACHITATU MU DOCUMENT ZIKUPEREKEDWA MONGA POpanda ZINTHU ZONSE ZOONA NDI ZOONA.
PALIBE CHISINDIKIZO CHOPATSIDWA KU ZOKHUDZA ZIMENEZI KUCHITA ZOCHITA, KUSAKOLAKWA, KAPENA KUKHALIRA PA CHOLINGA CHENKHANI KILICHONSE, KAPENA CHITIMIKIRO CHILICHONSE CHOCHOKERA PA MFUNDO, KUKHALA, KAPENA S.AMPLE.
Ngongole zonse, kuphatikiza udindo wophwanya ufulu wa eni ake, wokhudzana ndi kugwiritsa ntchito chidziwitso chomwe chili m'chikalatachi sichiloledwa. Palibe zilolezo zofotokozedwa kapena kutanthauza, mwa estoppel kapena mwanjira ina, paufulu uliwonse waukadaulo womwe ukuperekedwa apa.
Chizindikiro cha Wi-Fi Alliance Member ndi chizindikiro cha Wi-Fi Alliance. Chizindikiro cha Bluetooth ndi chizindikiro cholembetsedwa cha Bluetooth SIG.
Mayina onse amalonda, zizindikiritso, ndi zilembo zolembetsedwa zomwe zatchulidwa m'chikalatachi ndi za eni ake ndipo tikuzindikila.
Kutulutsidwa koyambirira v0.6 Ufulu
© 2022 Espressif Systems (Shanghai) Co., Ltd. Ufulu wonse ndi wotetezedwa.

Zolemba / Zothandizira

ESPRESSIF ESP32-S3-WROOM-1 Bluetooth Module [pdf] Buku Logwiritsa Ntchito ESP32- S3- WROOM -1, ESP32 -S3 -WROOM -1U, Bluetooth Module, ESP32- S3- WROOM -1 Bluetooth Module

Maumboni

• Buku Logwiritsa Ntchito