Elko EP RFSAI-62B-SL Canja Unit Tare da Abubuwan Shiga Don Maɓallin waje

Ƙayyadaddun samfur:

• Lambobin Samfura: RFSAI-62B-SL, RFSAI-61B-SL, RFSAI-11B-SL, RFSAI-61BPF-SL
• An yi a: Jamhuriyar Czech
• Nau'in Gudanarwa: Jagora mai ƙarfi
• Girman Mai Gudanarwa: 0.2-1.5 mm2 (RFSAI-62B-SL), 20-16 AWG max. 8 mm (RFSAI-62B-SL)
• Mai jituwa tare da: Tsarin katako tare da allunan filasta, simintin da aka ƙarfafa, sassan ƙarfe, gilashin gama gari

Umarnin Amfani da samfur

Manunonin Ayyukan Ƙwaƙwalwa:
Kunnawa - LED kiftawa x 3. Kashe - LED yana haskakawa sau ɗaya na dogon lokaci.

Umarnin Haɗawa:

1. Latsa (1s) na maɓallin haɗin haɗin gwiwa
2. Dogon danna (1s>) na maɓallin PROG don shigar da yanayin haɗawa
3. Short latsa (> 1s) na maɓallin da aka zaɓa akan mai sarrafawa (yawan latsawa = aiki)
4. A takaice latsa (> 1s) na maɓallin PROG don fita yanayin shirye-shirye
5. Don sanya mai sarrafawa ba tare da maɓallin haɗawa ba, bi takamaiman matakai

Hanyoyin Haɗa:

• Saurin walƙiya yana nuna haɗawa ba tare da yanayin dacewa ba
• Shortan filasha biyu suna nuna haɗin kai a yanayin dacewa

Share Memory:

1. Don share tashar da aka haɗa zuwa maɓalli akan mai sarrafawa, danna maɓallin PROG akan na'urar don 5 s ko 7 s.
2. Don share ƙwaƙwalwar ajiyar na'urar gaba ɗaya, danna maɓallin PROG akan na'urar don 8/10/11 s bisa ga nau'in na'urar.

Tambayoyin da ake yawan yi (FAQ):

• Tambaya: Menene alamun LED daban-daban ke nunawa?
  A: LED bliking x 3 yana nuna aikin ƙwaƙwalwar ajiya yana kunne, yayin da dogon haske mai ƙarfi na LED yana nuna cewa yana kashe.
• Tambaya: Ta yaya zan iya haɗa mai sarrafawa ba tare da maɓallin haɗawa ba?
  A: Bi takamaiman hanyoyin da aka zayyana a cikin littafin mai amfani don sanya tsofaffin sarrafawa zuwa na'urori.

Halaye

• Ana amfani da ɓangaren sauyawa tare da fitarwa ɗaya/biyu don sarrafa kayan aiki da fitilu. Ana iya amfani da maɓalli/maɓallan da aka haɗa da wayoyi don sarrafawa.
• Ana iya haɗa su tare da Masu Ganowa, Masu Sarrafa ko Abubuwan Tsarin Sarrafa INELS RF.
• Sigar BOX tana ba da shigarwa kai tsaye a cikin akwatin shigarwa, rufi ko murfin na'urar da aka sarrafa. Sauƙaƙan shigarwa godiya ga tashoshi mara kyau.
• Yana ba da damar haɗin abubuwan da aka canza tare da jimlar jimlar 8 A (2000 W).
• Ayyuka: don RFSAI 61B-SL da RFSAI 62B-SL - maɓallin turawa, relay mai motsi da ayyukan lokaci na jinkirta farawa ko dawowa tare da saita lokaci 2 s-60 min. Ana iya sanya kowane aiki ga kowane fitarwar fitarwa. Don RFSAI-11B-SL, maɓallin yana da ƙayyadadden aiki - ON / KASHE.
• Ana sanya maɓallin waje kamar yadda mara waya.
• Kowace fitowar za a iya sarrafa ta har zuwa tashoshi 12/12 (tashar 1 tana wakiltar maɓalli ɗaya akan mai sarrafawa). Har zuwa tashoshi 25 don RFSAI-61B-SL da RFSAI-11B-SL.
• Maɓallin shirye-shirye akan ɓangaren kuma yana aiki azaman sarrafa fitarwa na hannu.
• Yiwuwar saita žwažwalwar ajiyar yanayin fitarwa idan an gaza da dawo da wuta na gaba.
• Ana iya saita abubuwan mai maimaitawa don abubuwan haɗin ta hanyar na'urar sabis na RFAF / USB, PC, aikace-aikace.
• Kewayi har zuwa mita 200 (waje), idan akwai rashin isasshiyar sigina tsakanin mai sarrafawa da na'urar, yi amfani da mai maimaita siginar RFRP-20N ko sashi tare da ka'idar RFIO2 mai goyan bayan wannan aikin.
• Sadarwa tare da ka'idojin RFIO2 na biyu.
•  Abubuwan tuntuɓar na'urar relay na AgSnO2 suna ba da damar sauya ballasts haske.

Majalisa

• hawa a cikin akwatin shigarwa
• hawa a cikin murfin haske
• rufi saka

Haɗin kai

Shigar da siginar rediyo ta hanyar kayan gini daban-daban

Nuni, kulawa da hannu

1. LED / PROG button
   • LED kore V1 - Alamar matsayin na'urar don fitarwa 1
   • LED ja V2 - Alamar matsayi na na'ura don fitarwa 2. Ma'anar aikin ƙwaƙwalwar ajiya:
   • Kunnawa - LED yana ƙyalli x 3.
   • Kashe - LED yana haskakawa sau ɗaya na dogon lokaci.
   • Ana aiwatar da sarrafa da hannu ta latsa maɓallin PROG don <1s.
   • Ana yin shirye-shirye ta latsa maɓallin PROG na 3-5s.
2. Toshe tasha - haɗi don maɓallin waje
3. Toshe na ƙarshe - haɗa madugu na tsaka tsaki
4. Katange tasha - haɗin kaya tare da jimlar jimlar
5. Katange tasha don haɗa madubin lokaci
   A cikin tsarin shirye-shirye da yanayin aiki, LED a kan sashin yana haskakawa a lokaci guda duk lokacin da aka danna maɓallin - wannan yana nuna umarnin mai shigowa.
   RFSAI-61B-SL: lambar fitarwa guda ɗaya, alamar matsayi ta jajayen LED

• Yi amfani da kayan aiki mai dacewa (takarda, screwdriver) don turawa akan sarrafawa Ana ɗaga batura kuma an saki maɓallin shirye-shirye.
• Bayan cire maɓallin sarrafawa, maɓallin shirye-shirye yana samun dama.
• Ana sarrafa maɓallin shirye-shirye tare da kayan aiki na bakin ciki mai dacewa.

Daidaituwa
Ana iya haɗa na'urar tare da duk abubuwan haɗin tsarin, sarrafawa da na'urori na iNELS Wireless (RFIO, RFIO2).

Zaɓin tashoshi 

• Zaɓin tashoshi (RFSAI-62B-SL) ana yin ta ta latsa maɓallan PROG na 1-3s. RFSAI-61B-SL: latsa fiye da daƙiƙa 1.
• Bayan sakin maɓallin, LED yana walƙiya yana nuna tashar fitarwa: ja (1) ko kore (2). Duk sauran sigina ana nuna su ta daidai launi na LED ga kowane tashoshi.

Masu sarrafawa ta hannu tare da na'urorin mara waya ta iNELS
Akwai nau'ikan nau'ikan haɗin gwiwa daban-daban bisa ga sigar masana'anta na direba. Saboda ci gaban fasaha, wanda babu makawa ko da a cikin samfuranmu, kuna iya samun masu sarrafawa tare da ko ba tare da maɓallin haɗawa ba. Kuna iya gano mai sarrafawa tare da maɓallin haɗin kai ta alamar a kan bugu a bayan ɓangaren kayan aiki da kuma kasancewar maɓalli na jiki a kan mai sarrafawa.

Don sanya maɓallan haɗin kai akan masu sarrafa ku:

• RFGB (duka zagaye da kaifi iri):
  Danna madaidaicin iko na sama (takarda, screwdriver) zai fitar da baturin kuma an saki maɓallin haɗin kai.
• RFWB:
  Ta hanyar cire faifan mai sarrafawa, ana samun isa ga maɓallin haɗawa.
• Makullin RF
  Yana nan kuma gefen kusa da lambar maɓalli 5.

Don sanya mai sarrafawa ta amfani da maɓallin haɗawa

• Riƙe maɓallin haɗin kai na daƙiƙa 1 don sanya mai sarrafawa cikin yanayin haɗawa - jajayen LED yana nuna tare da ɗan gajeren walƙiya. Na gaba, ka riƙe maɓallin PROG akan na'urar da kake son sarrafawa don 1s, 2 s ko 3s (duba Tab 1) Yanayin maɓallin PROG) Na gaba, ci gaba da saita ayyukan (1 zuwa 6) ta danna maɓallin da ya dace akan mai sarrafawa tare da lambar da ta dace na latsawa (duba Tab 2). Kammala shirye-shirye ta hanyar danna maɓallin PROG akan na'urar a taƙaice kuma danna maɓallin haɗin kai akan mai sarrafawa. Muna ba da shawarar ku fara shigar da mai sarrafawa zuwa yanayin haɗawa sannan na'urar. Saka mai sarrafawa da na'urar cikin yanayin haɗawa ana yin siginar ta jajayen LED tare da ɗan gajeren kiftawa.
• Latsa (1s), Gajerun latsa (> 1s), Dogon latsa (1s>)
  
• Cire da saka baturin don kunna tsohuwar yanayin
• Dogon danna (1s>) na maɓallin PROG (duba Tab 1)
• Short latsa (> 1s) na maɓallin da aka zaɓa akan mai sarrafawa (yawan latsawa = aiki)
• A takaice latsa (> 1s) na maɓallin PROG don fita yanayin shirye-shirye.
  

Haɗin kai ba tare da yanayin dacewa ba

Da farko, saka baturin a cikin mai sarrafawa. Idan an riga an shigar da baturin a cikin mai sarrafawa, cire shi don akalla 5 s don mayar da shi zuwa yanayin da ya dace. Bayan shigar da baturin, yayin da jajayen LED ke kunna (3 s), latsa ka riƙe 1 har sai mai sarrafawa ya fara nuna yanayin direba ta hanyar ɗan firgita LED. Sa'an nan kuma saki maɓallin don sa mai sarrafawa ya shirya don haɗawa. Na gaba, ka riƙe maɓallin PROG akan na'urar da kake son sarrafawa don 1, 2 ko 3 s (duba. Tab 1) ci gaba da saita ayyuka 1 zuwa 6 ta danna maɓallin da ya dace akan mai sarrafawa tare da adadin latsa masu dacewa (duba). Tabbata 2). Kammala shirye-shirye ta hanyar danna maɓallin PROG akan na'urar a taƙaice da cirewa da sake shigar da baturin cikin mai sarrafawa.

• Don share tashar da aka haɗa zuwa maɓalli akan mai sarrafawa, danna PROG akan na'urar na tsawon s 5 ko 7 (duba. Tab 1). Share žwažwalwar ajiya na maɓallin kuma danna maɓallin da ya dace akan mai sarrafawa wanda kake son cirewa. Bayan wannan mataki, yana komawa yanayin aikinsa.
• Idan kana so ka share ƙwaƙwalwar ajiyar na'urar gaba ɗaya (cire duk maɓallan ko share duk tashoshi a lokaci ɗaya, danna maɓallin PROG akan na'urar don 8/10/11 s bisa ga nau'in na'urar (duba. Tab 1). ƙwaƙwalwar ajiyar na'urar gabaɗaya Na'urar tana cikin yanayin haɗawa.
• GASKIYA CIGABAN DRIVER
  
• Da fatan za a kula:
  Idan kuna haɗa tsofaffin nau'ikan direbobi ko fasali tare da juna, ba zai yiwu a fayyace sarai ko kuna buƙatar amfani da Yanayin Ƙarfafawa don haɗawa ko a'a ba. Don haka, kuna buƙatar gwada hanyoyi biyu.
  Maɓallin RF/W da RF Key/B key fobs da sauran direbobi na mafi tsufa mai yuwuwar sigar ba za a iya haɗa su tare da na'urorin da ke da alamar raƙuman radiyo a maɓallin PROG ba. RFSAI-62-SL, RFSA-62B, RFSAI-62B da RFDAC-71B raka'o'in suna da hanyar haɗa juna daban-daban. Koyaushe bi umarnin na'urorin.

Ayyuka da shirye-shirye tare da masu watsa RF

Maɓallin aiki
Bayanin maɓalli 

• Za a rufe lambar fitarwa ta latsa maɓallin kuma buɗe ta hanyar sakin maɓallin.
• Domin aiwatar da daidaitattun umarnin mutum (latsa = rufewa / sakewa maɓallin = buɗewa), jinkirin lokaci tsakanin waɗannan umarni dole ne ya zama min na . 1s (latsa - jinkirta 1s - saki).

Shirye-shirye 

• Danna maɓallin shirye-shirye akan mai karɓar RFSAI-62B don 3-5 s (RFSAI-61B-SL: danna fiye da 1 s) zai kunna RFSAI-62B mai karɓa zuwa yanayin shirye-shirye. LED yana walƙiya a cikin tazarar 1s.
• Danna maɓallin shirye-shirye akan mai karɓar RFSAI-62B don 3-5 s (RFSAI-61B-SL: danna fiye da 1 s) zai kunna RFSAI-62B mai karɓa zuwa yanayin shirye-shirye. LED yana walƙiya a cikin tazarar 1s.
• Latsa maɓallin shirye-shirye akan mai karɓar RFSAI-62B ya fi guntu sannan 1 seconds zai ƙare yanayin shirye-shirye. LED ɗin yana haskakawa bisa ga aikin ƙwaƙwalwar ajiya da aka saita.
  

Kunna aiki 

• Bayanin kunnawa
  Za a rufe lambar fitarwa ta latsa maɓallin.
• Danna maɓallin shirye-shirye akan mai karɓar RFSAI-62B don 3-5 s (RF-SAI-11B-SL: latsa fiye da 1s) zai kunna RFSAI-62B mai karɓa zuwa yanayin shirye-shirye. LED yana walƙiya a cikin tazarar 1s.
• Latsa biyu na maɓallin da kuka zaɓa a kan mai watsa RF suna ba da damar kunna aikin (dole ne ya ƙare 1s tsakanin latsawa ɗaya).
• Latsa maɓallin shirye-shirye akan mai karɓar RFSAI-62B ya fi guntu sannan 1 seconds zai ƙare yanayin shirye-shirye. LED ɗin yana haskakawa bisa ga aikin ƙwaƙwalwar ajiya da aka saita.

Kashe aiki 

• Bayanin kashewa /
• Za a buɗe lambar fitarwa ta latsa maɓallin.
  
• Danna maɓallin shirye-shirye akan mai karɓar RFSAI-62B don 3-5 s (RF-SAI-61B-SL: danna fiye da 1 s) zai kunna RFSAI-62B mai karɓa zuwa yanayin shirye-shirye. LED yana walƙiya a cikin tazarar 1s.
• Latsa uku na maɓallin da kuka zaɓa akan mai watsa RF yana ba da aikin kashewa (dole ne ya zama 1s tsakanin latsawa ɗaya).
• Latsa maɓallin shirye-shirye akan mai karɓar RFSAI-62B ya fi guntu sannan 1 seconds zai ƙare yanayin shirye-shirye. LED ɗin yana haskakawa bisa ga aikin ƙwaƙwalwar ajiya da aka saita.
  

Relay aikin motsa jiki

• Za a canza lambar fitarwa zuwa matsayi na gaba ta kowane latsa maɓallin. Idan an rufe lambar sadarwa, za a buɗe kuma akasin haka.

Shirye-shirye

• Danna maɓallin shirye-shirye akan mai karɓar RFSAI-62B don 3-5 s (RFSAI-61B-SL: danna fiye da 1 s) zai kunna RFSAI-62B mai karɓa zuwa yanayin shirye-shirye. LED yana walƙiya a cikin tazarar 1s.
• Latsa huɗu na maɓallin da kuka zaɓa akan mai watsa RF kamar yadda-alama ce ta isar da saƙon aikin (dole ne ya zama 1s tsakanin latsawa ɗaya).
• Latsa maɓallin shirye-shirye akan mai karɓar RFSAI-62B ya fi guntu sannan 1 seconds zai ƙare yanayin shirye-shirye. LED ɗin yana haskakawa bisa ga aikin ƙwaƙwalwar ajiya da aka saita.
  

An jinkirta aiki 

• Bayanin jinkirta kashewa
• Za a rufe lambar fitarwa ta latsa maɓallin kuma buɗe bayan tazarar lokacin da aka saita ya wuce.

Shirye-shirye 

• Danna maɓallin shirye-shirye akan mai karɓar RFSAI-62B don 3-5 s (RF-SAI-61B-SL: danna fiye da 1 s) zai kunna RFSAI-62B mai karɓa zuwa yanayin shirye-shirye. LED yana walƙiya a cikin tazarar 1s.
• Aiwatar da aikin kashewa ana yin ta latsa guda biyar na maɓallin da aka zaɓa akan mai watsa RF (dole ne ya zama ƙarancin 1s tsakanin latsa ɗaya).
• Danna maɓallin shirye-shirye fiye da daƙiƙa 5, zai kunna actuator zuwa yanayin lokaci. LED yana haskaka 2x a kowane tazara 1s. Bayan fitar da maɓallin, jinkirin dawowa zai fara ƙirgawa.
  
• Bayan lokacin da ake so ya wuce (kewayon 2s… 60min), yanayin lokacin yana ƙare ta danna maɓallin kan mai watsa RF, wanda aka sanya aikin dawowar jinkiri. Wannan yana adana tazarar lokacin saita a cikin ƙwaƙwalwar mai kunnawa.
• Latsa maɓallin shirye-shirye akan mai karɓar RFSAI-62B ya fi guntu sannan 1 seconds zai ƙare yanayin shirye-shirye. LED ɗin yana haskakawa bisa ga aikin ƙwaƙwalwar ajiya da aka saita.
  
• Za a buɗe lambar fitarwa ta latsa maɓallin kuma rufe bayan tazarar lokacin da aka saita ya wuce.
• Danna maɓallin shirye-shirye akan mai karɓar RFSAI-62B don 3-5 s (RF-SAI-61B-SL: latsa fiye da 1s) zai kunna RFSAI-62B mai karɓa zuwa yanayin shirye-shirye. LED yana walƙiya a cikin tazarar 1s.
• Aiwatar da jinkirin aiki ana yin shi ta latsa shida na maɓallin da aka zaɓa akan mai watsa RF (dole ne ya zama 1s tsakanin latsawa ɗaya).
• Danna maɓallin shirye-shirye fiye da daƙiƙa 5, zai kunna actuator zuwa yanayin lokaci. LED yana haskaka 2x a kowane tazara 1s. Bayan fitar da maɓallin, jinkirin dawowa zai fara ƙirgawa.
• Bayan lokacin da ake so ya wuce (kewayon 2s… 60min), yanayin lokacin yana ƙare ta danna maɓallin kan mai watsa RF, wanda aka sanya aikin dawowar jinkiri. Wannan yana adana tazarar lokacin saita a cikin ƙwaƙwalwar mai kunnawa.
• Latsa maɓallin shirye-shirye akan mai karɓar RFSAI-62B ya fi guntu sannan 1 seconds zai ƙare yanayin shirye-shirye. LED ɗin yana haskakawa bisa ga aikin ƙwaƙwalwar ajiya da aka saita.

Shirye-shirye tare da sassan sarrafa RF 

• Ana amfani da adiresoshin da aka jera a gefen gaba na mai kunnawa don tsarawa da sarrafa mai kunnawa da kowane tashoshi RF ta raka'a masu sarrafawa.

Share actuator 

• Share matsayi ɗaya na mai watsawa
• Ta latsa maɓallin shirye-shirye akan actuator na tsawon daƙiƙa 8 (RFSAI-61B-SL: latsa don 5 seconds), shafewar watsawa ɗaya yana kunna. LED fl ashs 4x a kowane tazara 1s.
• Danna maɓallin da ake buƙata akan mai watsawa yana share shi daga ƙwaƙwalwar mai kunnawa.
• Don tabbatar da gogewa, LED ɗin zai tabbatar da dogon filasha kuma ɓangaren ya koma yanayin aiki. Ba a nuna halin ƙwaƙwalwar ajiya ba.
• Sharewa baya shafar aikin ƙwaƙwalwar ajiya da aka saita.

Share duk ƙwaƙwalwar ajiya 

• Ta latsa maɓallin shirye-shirye akan mai kunnawa na tsawon daƙiƙa 11 (RFSAI-61B-SL: latsa sama da daƙiƙa 8), gogewa yana faruwa daga ƙwaƙwalwar ajiyar gabaɗayan actuator. LED fl ashs 4x a kowane tazara 1s. Mai kunnawa yana shiga cikin yanayin shirye-shirye, LED yana haskakawa a cikin tazara na 0.5s (max. 4 min.).
  Kuna iya komawa yanayin aiki ta latsa maɓallin Prog na ƙasa da 1s. LED ɗin yana haskakawa bisa ga aikin ƙwaƙwalwar ajiya da aka riga aka saita kuma ɓangaren yana komawa yanayin aiki. Sharewa baya shafar aikin žwažwalwar ajiya da aka saita.

Zaɓi aikin ƙwaƙwalwar ajiya 

• Danna maɓallin shirye-shirye akan mai karɓar RFSAI-62B na 3-5 seconds (RFSAI-61B-SL: danna don 1 seconds) zai kunna RFSAI-62B mai karɓa zuwa yanayin shirye-shirye. LED yana walƙiya a cikin tazarar 1s.
• Duk sauran canje-canje ana yin su ta hanya ɗaya.
• Aikin ƙwaƙwalwa akan:
  • Don ayyuka na 1-4, ana amfani da waɗannan don adana yanayin fitarwa na ƙarshe kafin samar da voltage sauke, ana yin rikodin canjin yanayin fitarwa zuwa ƙwaƙwalwar ajiya 15 seconds bayan canjin.
  • Don ayyuka 5-6, yanayin da aka yi niyya na relay yana shiga cikin ƙwaƙwalwar ajiya nan da nan bayan jinkiri, bayan sake haɗa wutar lantarki, an saita relay zuwa yanayin da aka yi niyya.
• A kashe aikin ƙwaƙwalwa:
• Lokacin da aka sake haɗa wutar lantarki, gudun ba da sanda ya kasance a kashe.
• Maɓallin waje RFSAI-62B-SL an tsara shi kamar yadda ake yi don mara waya. RFSAI-11B-SL ba a tsara shi ba, yana da tsayayyen aiki.
  

Haɗawa da daidaitawar mai sarrafa RFDALI ta hanyar web Zinterface

• Ainihin advantage na haɗawa da daidaitawar mai sarrafa RFDALI shine yuwuwar raba na'urar DALI zuwa yankuna ko ƙungiyoyin sarrafawa da haɗa maɓallan masu sarrafawa da su.
• Wani advantage shine haɓakar haɗawa a cikin yanayin babban adadin masu sarrafawa waɗanda muke son haɗawa tare da RFDALI.
• Shiga zuwa ga web dubawa:
  Yana yiwuwa a haɗa zuwa web dubawa a cikin mintuna 2 bayan amfani da wutar lantarki zuwa DALI Controller ko yana yiwuwa a haɗa kowane lokaci lokacin da aka fara sadarwar Wi-Fi akan naúrar ta latsa maɓallin PROG sau 5 a cikin tazara na daƙiƙa 1. LED mai nuna alamar maɓallin PROG yana walƙiya da sauri lokacin da aka kunna sadarwar Wi-Fi.
• Bayan kiran sadarwar wifi, bincika naúrar azaman hanyar sadarwar WI-Fi ta yau da kullun tare da taimakon PC, smartphone ko kwamfutar hannu. Ana yiwa hanyar sadarwar lakabi: RFDALI_ + adireshin MAC guda ɗaya. Shigar da adireshin cibiyar sadarwar sa a cikin mai bincike: 192.168.1.1
  
• Saituna a cikin web dubawa
  • A cikin web dubawa, naúrar tana da tushe na asali guda 4 don saiti: CONTROLERS, DALI NA'URORI da PAIRING da shafin DOCUMENTATION
• CONTROLERS tab
  • Ana amfani da shafin CONTROLERS don haɗa masu sarrafawa zuwa mai sarrafa RFDALI ta amfani da adiresoshin RF ɗin sa na musamman. Wannan yayi kama da haɗin gwiwar hannu, idan a baya kun haɗa direbobi da hannu, zaku gan su a cikin jerin adiresoshin da aka haɗe.
  • Haɗin kai: mun shigar da adireshin RF a cikin filin ADDRESS, a cikin filin LABEL muna ƙara sunan mai sarrafawa a kowane tsari don sauƙi daidaitawa, a cikin filin BUTTONS muna shigar da ainihin adadin maɓallin sarrafawa. Danna maɓallin
  • Maɓallin BIYU don adana mai sarrafawa a ƙwaƙwalwar ajiya. Bayan haɗawa, direba yana bayyana a cikin jerin kuma mai amfani yana da zaɓi don gyara ko share direban.
  • Hankali: Masu sarrafawa waɗanda ke da maɓalli 6, kamar RF KEY-60, sun ƙunshi adireshi biyu.
• DALI NA'URORI tab
  • Maɓallin SCAN THE BUS yana kunna binciken atomatik na na'urorin DALI akan bas ɗin.
    Tunda mai kula da RFDALI yana neman duk na'urorin da ke cikin motar DALI idan an haɗa su da farko kuma ya haɗa su zuwa adireshi ɗaya don sarrafawa, koyaushe kunna binciken na'urorin DALI kafin ka fara sanya maɓalli ɗaya zuwa na'urorin da aka zaɓa.
  • Dangane da adadin na'urorin DALI da aka haɗa, binciken na iya ɗaukar har zuwa mintuna 5. Na'urorin DALI da aka bincika zasu bayyana a cikin jerin. Yi amfani da maɓallin EDIT don shigar da sunan na'urar DALI a cikin filin LABEL. Tare da taimakon maɓalli tare da alamar PLAY, na'urorin da aka zaɓa za a iya sarrafa su da hannu a yanayin gwaji. Maɓallin tare da alamar TSARA yana share na'urar DALI da aka nema.
• DOCUMENTATION tab
  • Shafin DOCUMENTATION ya ƙunshi cikakken jagorar na'urar da sigogin fasaha.
• Sadarwa tare da aikace-aikacen
  • Ana iya sarrafa mai sarrafa RFDALI a cikin app na iNELS. Ana yin aikin ta amfani da adireshin RF akan na'urar ko a cikin web dubawa a cikin shafin CONTROLERS a cikin filin rawaya.
  • Hankali: Ana iya sarrafa mai sarrafa RFDALI daga app azaman yankin sarrafawa ɗaya don duk adiresoshin DALI akan bas.
• TAMBAYA shafin
  • Ana amfani da shafin PAIRING don sanya maɓalli da ayyuka guda ɗaya da hannu zuwa na'urorin RFDALI da aka zaɓa. A cikin filin na'ura, zaɓi na'urar RFDALI. A cikin filin AIKI, mun sanya ɗayan ayyukan saiti na naúrar, waɗanda aka bayyana a cikin Ayyuka da shirye-shirye zuwa iNELS Wireless controllers (1-7). A cikin filin CONTROLLES, na zaɓi mai sarrafawa wanda nake son sarrafa na'urar da shi kuma a cikin filin BUTTON na zaɓi takamaiman maɓallin na'urar da nake son sarrafa shi. Tabbatar da saitin ta latsa maɓallin CREATE. Saitin nau'i na na zai bayyana a lissafin da ke ƙasa.
  • Hankali: Na'urorin DALI da maɓallin sarrafawa waɗanda aka haɗa ta wannan hanyar ba za a iya share su daga jerin abubuwan da ke cikin na'urorin DALI da masu sarrafawa ba. Idan kana son cire su, dole ne ka fara share duk wani nau'i-nau'i da aka ƙirƙira waɗanda ake amfani da waɗannan na'urori ko direbobi.

Siffofin fasaha

Ƙarar voltage:	230 V AC
Ƙarar voltage mita:	50-60 Hz
Shigar da ke bayyane:	7 VA / cos φ = 0.1
Rashin wutar lantarki:	0.7 W
Ƙarar voltage haƙuri:	+10%; -15%
Fitowa
Adadin abokan hulɗa:	1 x sauyawa / 1 x spinací			2xswitching / 2x spinací
Ƙididdigar halin yanzu:	8 A / AC1
Ƙarfin juyawa:	2000 VA / AC1
Kololuwar halin yanzu:	10 A / <3 s
Sauyawa voltage:	250V AC1
Rayuwar sabis na injina:	1×107
Rayuwar sabis na lantarki (AC1):	1×105
Sarrafa
Mara waya:	25-tashoshi/ 25 kanálů			2 x 12-tashoshi / kanály
Adadin ayyuka:	6	1	6	6
Ka'idar sadarwa:	RFIO2
Mitar:	866-922 MHz (don ƙarin bayani duba shafi na 74)/866-922 MHz (wato str. 74)
Maimaita aikin:	iya/an
Ikon sarrafawa:	maballin PROG (ON/KASHE)/Tlačítko PROG (ON/KASHE)
Maɓallin waje / sauyawa: Range:	iya/an
Sauran bayanai	a sararin sarari har zuwa 200 m/ na volném prostranství až 200 m
Yanayin aiki:
Matsayin aiki:	-15 az + 50 ° C
Matsayin aiki:	kowane / libovolná
hawa:	kyauta a wayoyi masu gubar / volné na přívodních vodičích
Kariya:	IP40
Ƙarfafawatage category:	III.
Matsayin gurɓatawa:	2
Haɗin kai:	screwless tashoshi / bezšroubove svorky
Mai haɗawa:	0.2-1.5 mm2 m/mai sassauci/ 0.2-1.5 mm2 pevný/pružný
Girma:	43 x 44 x 22 mm
Nauyi:	31 g			45g ku
Matsayi masu alaƙa:	EN 60730, EN 63044, EN 300 220, EN 301 489

Shigar da maɓallin sarrafawa yana a kan samar da voltage m.

• Hankali:
  Lokacin da kuka shigar da tsarin sarrafa iNELS RF, dole ne ku kiyaye mafi ƙarancin tazara 1 cm tsakanin kowace raka'a. Tsakanin umarni guda ɗaya dole ne ya kasance tazara na aƙalla 1s.
• Gargadi
• An tsara littafin koyarwa don hawa da kuma mai amfani da na'urar. Koyaushe wani bangare ne na shiryawa. Ana iya aiwatar da shigarwa da haɗin kai kawai ta mutumin da ke da isassun ƙwararrun ƙwararru bayan fahimtar wannan jagorar koyarwa da ayyukan na'urar, da kuma kiyaye duk ƙa'idodi masu inganci. Ayyukan na'urar ba tare da matsala ba kuma ya dogara da sufuri, adanawa da sarrafawa. Idan kun lura da kowace alamar lalacewa, nakasawa, rashin aiki ko ɓarna, kar a shigar da wannan na'urar kuma mayar da ita ga mai siyar ta. Wajibi ne a kula da wannan samfurin da sassansa azaman sharar lantarki bayan an ƙare rayuwarsa. Kafin fara shigarwa, tabbatar da cewa duk wayoyi, sassan da aka haɗa ko tashoshi an daina samun kuzari. Yayin hawa da hidima kiyaye ƙa'idodin aminci, ƙa'idodi, umarni da ƙwararru, da dokokin fitarwa don aiki tare da na'urorin lantarki. Kar a taɓa sassan na'urar da ke da kuzari - barazanar rayuwa. Saboda watsa siginar RF, lura da daidai wurin abubuwan RF a cikin ginin da ake aiwatar da shigarwa. Ikon RF an tsara shi ne kawai don hawa a ciki. Ba a keɓance na'urori don shigarwa cikin waje da wurare masu ɗanɗano ba. Ba dole ba ne a shigar da shi cikin allunan karfe da kuma cikin allunan filastik tare da ƙofar ƙarfe - watsa siginar RF ba zai yiwu ba. Ba a ba da shawarar Sarrafa RF don abubuwan jan hankali da sauransu – siginar mitar rediyo za a iya kiyaye shi ta hanyar toshewa, mai shiga tsakani, baturi na transceiver zai iya samun fl a da sauransu kuma don haka yana kashe ikon nesa.
• ELKO EP ya bayyana cewa nau'in kayan aiki na RFSAI-xxB-SL ya dace da Dokokin 2014/53/EU, 2011/65/EU, 2015/863/EU da 2014/35/EU. Cikakkar sanarwar EU tana nan:
• https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—-rfsai-11b-sl
• https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—-rfsai-61b-sl
• https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—rfsai-62b-sl
• https://www.elkoep.com/switch-unit-with-input-for-external-button-1-channel—-rfsai-61bpf-sl
• Tel.: +420 573 514 211, e-mail: alko@elkoep.com, www.elkoep.com
• ELKO EP, sro
• e-mail: alko@elkoep.cz
• Taimako: +420 778 427 366
• www.elkoep.com

Takardu / Albarkatu

Elko EP RFSAI-62B-SL Canja Unit Tare da Abubuwan Shiga Don Maɓallin Waje [pdf] Jagoran Jagora RFSAI-62B-SL Canja Unit Tare da Abubuwan Shiga Don Maɓallin Waje, RFSAI-62B-SL, Rukunin Canjawa Tare da Abubuwan Maɓallin Maɓalli na waje, Naúrar Tare da Abubuwan Maɓallin Maɓalli na waje, Abubuwan Maɓalli na waje , Buttons

Magana

• Manual mai amfani