Elko EP RFSAI-62B-SL Switch Unit Ine Izvo Zvinopinza Zvekunze Bhatani

Zvigadzirwa Zvinotsanangurwa:

• Muenzaniso Nhamba: RFSAI-62B-SL, RFSAI-61B-SL, RFSAI-11B-SL, RFSAI-61BPF-SL
• Yakagadzirwa mu: Czech Republic
• Conductor Type: Solid conductor
• Conductor Size Range: 0.2-1.5 mm2 (RFSAI-62B-SL), 20-16 AWG max. 8 mm (RFSAI-62B-SL)
• Inopindirana ne: Zvivako zvehuni zvine mapuranga epurasita, kongiri yakasimbiswa, zvikamu zvesimbi, girazi rakajairika

Mirayiridzo Yekushandiswa Kwechigadzirwa

Memory Function Indicators:
Yabatidza - LED inopenya x 3. Yakadzima - Iyo LED inovhenekera kamwe kwenguva refu.

Pairing Instructions:

1. Dzvanya (1s) yebhatani rekubatanidza
2. Dzvanya kwenguva refu (1s>) yePROG bhatani kuti uise pairing mode
3. Pfupi kudzvanya (> 1s) yebhatani rakasarudzwa pane controller (nhamba yezvidzvanya = basa)
4. Pfupi kudzvanya (> 1s) yePROG bhatani kuti ubude muchirongwa chekugadzira
5. Kuti upe mutongi pasina bhatani rekubatanidza, tevera maitiro chaiwo

Pairing Modes:

• Kukurumidza kupenya kunoratidza kubatanidza pasina kuenderana modhi
• Kupenya kupfupi kaviri kunoratidza pairing mucompatibility mode

Kuchenesa Memory:

1. Kuti ubvise chiteshi chakatopetwa kune bhatani pane controller, tinya bhatani rePROG pachishandiso che5 s kana 7 s.
2. Kubvisa ndangariro yechishandiso chose, dzvanya bhatani rePROG pane mudziyo we8/10/11 s zvinoenderana nerudzi rwechishandiso.

Mibvunzo Inowanzo bvunzwa (FAQ):

• Q: Ko zvakasiyana LED zviratidzo zvinorevei?
  A: Iyo LED inopenya x 3 inoratidza ndangariro basa rakabatidzwa, nepo refu yakasimba yakasimba LED mwenje inoratidza kuti yakadzimwa.
• Mubvunzo: Ndingabatanidza sei mutongi pasina bhatani rekubatanidza?
  A: Tevedzera maitiro akatsanangurwa mubhuku revashandisi rekugovera zvidzoreso zvekare kumidziyo.

Hunhu

• Iyo inoshandura chikamu ine imwe / mbiri inoburitsa relay inoshandiswa kudzora midziyo uye mwenje. Kushandura / mabhatani akabatanidzwa kune wiring anogona kushandiswa kutonga.
• Iwo anogona kusanganiswa neDetector, Controllers kana iNELS RF Kudzora System Zvikamu.
• Iyo BOX vhezheni inopa kuisirwa zvakananga mubhokisi rekuisa, sirin'i kana chivharo chemudziyo unodzorwa. Kuisa nyore kuvonga kune screwless terminals.
• Iyo inobvumira kubatanidzwa kwemitoro yakashandurwa nehuwandu hwe8 A (2000 W).
• Mabasa: eRFSAI 61B-SL uye RFSAI 62B-SL - pushbutton, impulse relay uye nguva mabasa ekunonoka kutanga kana kudzoka nenguva yekuseta 2 s-60 min. Chero basa rinogona kupihwa kune yega yega inobuda relay. YeRFSAI-11B-SL, bhatani rine basa rakagadziriswa - ON / OFF.
• Bhatani rekunze rinopihwa nenzira imwechete neiyo isina waya.
• Imwe neimwe yezvinobuda inogona kudzorwa kusvika ku12/12 chiteshi (1-channel inomiririra bhatani rimwe pane controller). Kusvika makumi maviri neshanu chiteshi cheRFSAI-25B-SL uye RFSAI-61B-SL.
• Bhatani rekugadzirisa pane chikamu rinoshandawo sechinyorwa chekubuda kwebhuku.
• Possibility kugadza goho mamiriro ndangariro kana kukundikana uye rinozotevera simba kupora.
• Zvinhu zveanodzokorora zvinogona kusetwa kune zvikamu kuburikidza neRFAF / USB sevhisi mudziyo, PC, application.
• Range kusvika ku200 m (kunze), kana chiratidzo chisina kukwana pakati pemutongi nemudziyo, shandisa RFRP-20N chiratidzo chekudzokorora kana chikamu chine RFIO2 protocol inotsigira basa iri.
• Kukurukurirana nebidirectional RFIO2 protocol.
•  Iyo yekubata zvinhu yeAgSnO2 relay inogonesa kuchinjika kwema ballasts emwenje.

Assembly

• kuiswa mubhokisi rekuisa
• kukwira muvhavha yechiedza
• siringi yakaiswa

Connection

Radio frequency chiratidzo chekupinda kuburikidza neakasiyana ekuvaka zvinhu

Chiratidzo, kudzora kwemaoko

1. LED / PROG bhatani
   • LED yegirini V1 - chimiro chechimiro chechiratidzo chekubuda 1
   • LED dzvuku V2 - chimiro chinoratidza chimiro chekubuda 2. Zviratidzo zvebasa rekurangarira:
   • Yabatidza - LED inopenya x 3.
   • Kudzima - Iyo LED inovhenekera kamwe kwenguva yakareba.
   • Manual control inoitwa nekudzvanya bhatani rePROG re<1s.
   • Kuronga kunoitwa nekudzvanya bhatani rePROG re3-5s.
2. Terminal block - kubatana kwebhatani rekunze
3. Terminal block - kubatanidza iyo isina kwayakarerekera conductor
4. Terminal block - mutoro wekubatanidza nehuwandu hwehuwandu
5. Terminal block yekubatanidza phase conductor
   Muchirongwa chekugadzirisa uye chekushanda, LED iri pachikamu inovhenekera panguva imwe chete nguva imwe neimwe bhatani rinodzvanywa - izvi zvinoratidza murairo unouya.
   RFSAI-61B-SL: imwe inobuda yekubata, chimiro chechiratidzo ne dzvuku LED

• Shandisa chishandiso chakakodzera (pepa clip, screwdriver) kusundira pakutonga Mabhatiri anosimudzwa uye bhatani rechirongwa rinoburitswa.
• Mushure mekubvisa mafiritsi ekudzora, bhatani rechirongwa rinosvikika.
• Bhatani rekugadzirisa rinoshandiswa nemudziyo wakakodzera wakatetepa.

Kugarisana
Chishandiso chinogona kusanganiswa nezvose zvinoumba system, zvinodzora uye zvishandiso zveNELS Wireless (RFIO, RFIO2).

Kusarudzwa kwechiteshi 

• Kusarudzwa kwechiteshi (RFSAI-62B-SL) kunoitwa nekudzvanya mabhatani ePROG e1-3s. RFSAI-61B-SL: dzvanya kweanopfuura 1 sekondi.
• Mushure mekuburitswa kwebhatani, LED iri kupenya ichiratidza nzira yekubuda: tsvuku (1) kana girini (2). Mamwe masaini ese anoratidzwa neinoenderana ruvara rwe LED kune yega chiteshi.

Manual paring controllers neNELS Wireless zvishandiso
Kune marudzi akasiyana-siyana ekubatanidza maererano nefekitari shanduro yemutyairi. Nekuda kwekufambira mberi kwetekinoroji, izvo zvisingadzivisike kunyangwe mune zvigadzirwa zvedu, unogona kuve nevatongi vane kana vasina bhatani rekubatanidza. Iwe unogona kuona mutongi nebhatani rekubatanidza nemucherechedzo pane yakadhindwa kuseri kwechiridzwa chepaneru uye kuvapo kwemuviri kwebhatani rekubatanidza pane controller.

Kuisa mabhatani ekubatanidza pazvidzori zvako:

• RFGB (dzose dzakatenderera uye dzakapinza shanduro):
  Kudzvanya pane yekumusoro control mandrel (bepa clip, screwdriver) inoburitsa bhatiri uye bhatani repairi rinoburitswa.
• RFWB:
  Nekubvisa iyo controller flap, bhatani rekubatanidza rinowanikwa.
• RF Kiyi
  Inowanikwa uye parutivi padyo nebhatani nhamba 5.

Kugovera controller uchishandisa bhatani rekubatanidza

• Bata bhatani rekubatanidza kwesekondi 1 kuti uise controller mukuita pairing mode - iyo tsvuku LED inoratidza nekapfupi mwenje. Tevere, bata bhatani rePROG pane mudziyo waunoda kudzora we1s, 2 sec kana 3s (ona. Tab 1) PROG mabhatani modes) Tevere, ramba uchiseta mabasa (1 kusvika 6) nekudzvanya bhatani rakakodzera pane controller ne. nhamba yakakodzera yezvitsigiro (ona Tab 2). Pedzisa hurongwa nekudzvanya muchidimbu bhatani rePROG pachishandiso uye nekudzvanya muchidimbu bhatani rekubatanidza pane controller. Isu tinokurudzira kuti utange waisa controller mune pairing mode uye ipapo mudziyo. Kuisa controller uye mudziyo mu pairing mode inosainwa neiyo tsvuku LED ine kapfupi blink.
• Dzvanya (1s), Kapfupi kudzvanya (>1s), Kudzvanya kwenguva refu (1s >)
  
• Kubvisa uye kuisa bhatiri kuti uvhure mamiriro ekutanga
• Kudzvanya kwenguva refu (1s >) yePROG bhatani (ona. Tab 1)
• Pfupi kudzvanya (> 1s) yebhatani rakasarudzwa pane controller (nhamba yezvidzvanya = basa)
• Pfupi kudzvanya (> 1s) yePROG bhatani kuti ubude muchirongwa chekugadzira.
  

Pairing pasina kuenderana modhi

Kutanga, isa bhatiri mumubati. Kana bhatiri rakatopinzwa mucontroller, ribvise kweinenge 5 s kuti uidzorere kune yayo default. Mushure mekuisa bhatiri, nepo iyo tsvuku LED yakabatidzwa (3 s), dzvanya uye ubate 1 kusvika mutongi atanga kuratidza mutyairi modhi nekupenya muchidimbu LED. Wobva wasunungura bhatani kuti controller igadzirire kubatanidza. Tevere, bata bhatani rePROG pamudziyo waunoda kudzora we1, 2 kana 3 s (ona. Tab 1) ramba uchiseta mabasa 1 kusvika 6 nekudzvanya bhatani rakakodzera pane controller nenhamba yakakodzera yekutsikirira (ona. Tab 2). Pedzisa hurongwa nekudzvanya muchidimbu bhatani rePROG pachishandiso uye kubvisa uye kudzorera bhatiri mune controller.

• Kuti ujekese chiteshi chakatopetwa kune bhatani pane controller, tinya PROG pane mudziyo kwenguva ye5 s kana 7 s (ona. Tab 1). Bvisa ndangariro yebhatani uye wodzvanya bhatani rakakodzera pane controller iro raunoda kusaita. Mushure menhanho iyi, inodzokera kumamiriro ayo ekushanda.
• Kana iwe uchida kudzima ndangariro yechishandiso chose (bvisa mabhatani ese kana kudzima machanera ese kamwechete, tinya bhatani rePROG pamudziyo we8/10/11 s zvinoenderana nerudzi rwechishandiso (ona. Tab 1). Kubvisa chiyeuchidzo chemudziyo wose.Chishandiso chinoramba chiri papairing mode.
• MUtyairi budiriro AXIS
  
• Ndapota cherechedza:
  Kana uri kubatanidza mavhezheni ekare evatyairi kana maficha kune mumwe nemumwe, hazvigoneke kunyatsoona kuti unoda kushandisa Compatibility Mode yekubatanidza kana kwete. Naizvozvo, unofanira kuedza nzira mbiri.
  RF Kiyi / W uye RF Kiyi / B kiyi fobs uye mamwe madhiraivha ekare vhezheni inobvira haichakwanise kupetwa nemidziyo ine redhiyo wavelet mamaki pane PROG bhatani. RFSAI-62-SL, RFSA-62B, RFSAI-62B uye RFDAC-71B zvikamu zvine nzira yakasiyana yekubatanidza. Nguva dzose tevera mirairo yezvishandiso.

Mabasa uye hurongwa neRF transmitters

Bhatani rekushanda
Tsanangudzo yebhatani 

• Iyo inobuda yekubata ichavharwa nekudzvanya bhatani uye kuvhurwa nekuburitsa bhatani.
• Nekuita kwakaringana kwemirairo yega yega (dzvanya = kuvhara / kuburitsa bhatani = kuvhura), nguva inononoka pakati pemirairo iyi inofanira kunge iri min ye. 1s (kudzvanya - kunonoka 1s - kuburitsa).

Programming 

• Dzvanya yepurogiramu bhatani pane inogamuchira RFSAI-62B ye3-5 s (RFSAI-61B-SL: kudzvanya kweinodarika 1 s) ichamutsa inogamuchira RFSAI-62B kuita programming mode. LED inopenya mukati me1s interval.
• Dzvanya yepurogiramu bhatani pane inogamuchira RFSAI-62B ye3-5 s (RFSAI-61B-SL: kudzvanya kweinodarika 1 s) ichamutsa inogamuchira RFSAI-62B kuita programming mode. LED inopenya mukati me1s interval.
• Dzvanya bhatani rechirongwa pane inogamuchira RFSAI-62B ipfupi ipapo 1 sekondi ichapedza programming mode. Iyo LED inovhenekera zvinoenderana neye-pre-set yekurangarira basa.
  

Basa chinja 

• Tsanangudzo yekuchinja
  Iyo inobuda yekubata ichavharwa nekudzvanya bhatani.
• Dzvanya yepurogiramu bhatani pane inogamuchira RFSAI-62B ye3-5 s (RF-SAI-11B-SL: kudzvanya kweanopfuura 1s) ichamutsa inogamuchira RFSAI-62B kuita programming mode. LED inopenya mukati me1s interval.
• Kudzvanya kaviri kwebhatani rako raunosarudza paRF transmitter inopa switch switch (inofanira kunge iri kupera kwema1s pakati pemichina yemunhu).
• Dzvanya bhatani rechirongwa pane inogamuchira RFSAI-62B ipfupi ipapo 1 sekondi ichapedza programming mode. Iyo LED inovhenekera zvinoenderana neye-pre-set yekurangarira basa.

Basa dzima 

• Tsananguro yekudzima /
• Iyo inobuda yekubata inovhurwa nekudzvanya bhatani.
  
• Dzvanya bhatani rechirongwa pane inogamuchira RFSAI-62B ye3-5 s (RF-SAI-61B-SL: kudzvanya kweinodarika 1 s) ichamutsa inogamuchira RFSAI-62B muchirongwa chechirongwa. LED inopenya mukati me1s interval.
• Kutsikirira katatu kwebhatani rako raunosarudza paRF transmitter kunopa basa rekudzima (rinofanira kunge riri kupera kwema1s pakati pemichina yega yega).
• Dzvanya bhatani rechirongwa pane inogamuchira RFSAI-62B ipfupi ipapo 1 sekondi ichapedza programming mode. Iyo LED inovhenekera zvinoenderana neye-pre-set yekurangarira basa.
  

Function impulse relay

• Iyo inobuda yekubata inochinjirwa kune yakatarisana chinzvimbo nekudzvanya kwega kwega kwebhatani. Kana iyo yekubata yakavharwa, ichavhurwa uye neimwe nzira.

Programming

• Dzvanya yepurogiramu bhatani pane inogamuchira RFSAI-62B ye3-5 s (RFSAI-61B-SL: kudzvanya kweinodarika 1 s) ichamutsa inogamuchira RFSAI-62B kuita programming mode. LED inopenya mukati me1s interval.
• Kudzvanya ina kwebhatani rako raunosarudza paRF transmitter se-inosaina basa reipulse relay (inofanirwa kunge iri kupera kwema1s pakati pemichina yemunhu).
• Dzvanya bhatani rechirongwa pane inogamuchira RFSAI-62B ipfupi ipapo 1 sekondi ichapedza programming mode. Iyo LED inovhenekera zvinoenderana neye-pre-set yekurangarira basa.
  

Basa ranonoka kupera 

• Tsanangudzo yekunonoka kudzima
• Iyo inobuda yekubata inovharwa nekudzvanya bhatani uye yakavhurwa mushure mekunge nguva yakatarwa yapera.

Programming 

• Dzvanya bhatani rechirongwa pane inogamuchira RFSAI-62B ye3-5 s (RF-SAI-61B-SL: kudzvanya kweinodarika 1 s) ichamutsa inogamuchira RFSAI-62B muchirongwa chechirongwa. LED inopenya mukati me1s interval.
• Kupihwa kweiyo inonoke kudzima basa kunoitwa nekudzvanya shanu kwebhatani rakasarudzwa paRF transmitter (inofanira kunge iri kupera kwe1s pakati pemichina yega yega).
• Dzvanya bhatani rechirongwa kwenguva refu ipapo 5 masekonzi, ichaisa actuator mukuita nguva. LED inopenya 2x mune yega yega 1s kupindirana. Pakusunungura bhatani, nguva yakanonoka yekudzoka inotanga kuverenga.
  
• Mushure mekunge nguva yaidiwa yapera (renji ye2s…60min), iyo nguva modhi inopera nekudzvanya bhatani riri paRF transmitter, iro rakanonoka kudzoka basa rinopihwa. Izvi zvinochengeta nguva yakatarwa yenguva muactuator memory.
• Dzvanya bhatani rechirongwa pane inogamuchira RFSAI-62B ipfupi ipapo 1 sekondi ichapedza programming mode. Iyo LED inovhenekera zvinoenderana neye-pre-set yekurangarira basa.
  
• Iyo inobuda yekubata inovhurwa nekudzvanya bhatani uye yakavharwa mushure mekunge nguva yakatarwa yapera.
• Dzvanya yepurogiramu bhatani pane inogamuchira RFSAI-62B ye3-5 s (RF-SAI-61B-SL: kudzvanya kweanopfuura 1s) ichamutsa inogamuchira RFSAI-62B kuita programming mode. LED inopenya mukati me1s interval.
• Kupihwa kwekunonoka pabasa kunoitwa nematsinha matanhatu ebhatani rakasarudzwa paRF transmitter (inofanira kunge iri kupera kwe1s pakati pemichina yemunhu).
• Dzvanya bhatani rechirongwa kwenguva refu ipapo 5 masekonzi, ichaisa actuator mukuita nguva. LED inopenya 2x mune yega yega 1s kupindirana. Pakusunungura bhatani, nguva yakanonoka yekudzoka inotanga kuverenga.
• Mushure mekunge nguva yaidiwa yapera (renji ye2s…60min), iyo nguva modhi inopera nekudzvanya bhatani riri paRF transmitter, iro rakanonoka kudzoka basa rinopihwa. Izvi zvinochengeta nguva yakatarwa yenguva muactuator memory.
• Dzvanya bhatani rechirongwa pane inogamuchira RFSAI-62B ipfupi ipapo 1 sekondi ichapedza programming mode. Iyo LED inovhenekera zvinoenderana neye-pre-set yekurangarira basa.

Kuronga neRF control units 

• Kero dzakanyorwa kumberi kweiyo actuator dzinoshandiswa kuronga uye kutonga iyo actuator uye yega RF chiteshi ne control unit.

Delete actuator 

• Kudzima imwe nzvimbo yetransmitter
• Nekudzvanya bhatani rechirongwa pane actuator kwemasekonzi masere (RFSAI-8B-SL: dzvanya kwemasekondi mashanu), kudzima kweimwe transmitter kunoshanda. LED fl ashs 61x mune imwe neimwe 5s kupindirana.
• Kudzvanya bhatani rinodiwa pane transmitter kunoidzima kubva mundangariro yeactuator.
• Kuti usimbise kudzima, iyo LED inosimbisa nemwenje wakareba uye chikamu chinodzokera kune inoshanda maitiro. Mamiriro endangariro haana kuratidzwa.
• Kudzima hakukanganisi pre-set memory function.

Kudzima memory yese 

• Nekudzvanya bhatani rechirongwa pane actuator kwemasekonzi gumi nerimwe (RFSAI-11B-SL: dzvanya kweanopfuura 61 sekondi), kudzima kunoitika ndangariro yese yeactuator. LED fl ashs 8x mune imwe neimwe 4s kupindirana. Iyo actuator inopinda muchirongwa chekugadzirisa, iyo LED inopenya muzvikamu zve 1s (max. 0.5 min.).
  Iwe unogona kudzokera kune inoshanda modhi nekudzvanya bhatani reProg isingasviki 1s. Iyo LED inovhenekera zvinoenderana neye-pre-set yekurangarira basa uye chikamu chinodzokera kune yekushandisa mode. Kudzima hakukanganisi preset memory basa.

Kusarudza basa rekuyeuka 

• Dzvanya bhatani rechirongwa pane inogamuchira RFSAI-62B ye3-5 sekondi (RFSAI-61B-SL: kudzvanya kwesekondi 1) ichamutsa inogamuchira RFSAI-62B muchirongwa chechirongwa. LED inopenya mukati me1s interval.
• Imwe neimwe shanduko inoitwa nenzira imwechete.
• Memory inoshanda pa:
  • Kune mabasa 1-4, aya anoshandiswa kuchengetedza mamiriro ekupedzisira eiyo relay kubuda pamberi pekupa voltage inodonha, shanduko yemamiriro ezvakabuda kundangariro inonyorwa masekonzi gumi nemashanu mushure mekuchinja.
  • Kune mabasa 5-6, iyo inotarirwa mamiriro eiyo relay inokurumidza kupinda mundangariro mushure mekunonoka, mushure mekubatanidzazve simba, relay inoiswa kune inotangwa nyika.
• Memory function yadzimwa:
• Kana magetsi abatanidzwazve, relay inoramba yakadzimwa.
• Bhatani rekunze RFSAI-62B-SL rakarongerwa nenzira imwechete neye waya isina waya. RFSAI-11B-SL haina kurongwa, ine basa rakagadziriswa.
  

Pairing uye kumisikidzwa kweRFDALI controller kuburikidza ne web Zinterface

• The basic advantage ye pairing uye kumisikidzwa kweRFDALI controller mukana wekukamura mudziyo weDALI munzvimbo dzekutonga dzega kana mapoka uye kubatanidza mabhatani anoenderana evanodzora navo.
• Imwe advantage ndiko kukurumidza kwekubatanidza munyaya yenhamba huru yevatongi vatinoda kubatanidza neRFDALI.
• Login to the web interface:
  Zvinokwanisika kubatanidza kune web interface mukati me2 maminetsi mushure mekushandisa simba kuDALI Controller kana zvinokwanisika kubatana chero nguva kana Wi-Fi kutaurirana kwatangwa payuniti nekudzvanya bhatani rePROG ka5 mu1 sekondi. Chiratidzo che LED chePROG bhatani chinopenya nekukurumidza kana kutaurirana kweWi-Fi kuchiitwa.
• Mushure mekukoka kutaurirana kwewifi, tsvaga iyo unit seyemhando yepamusoro WI-Fi network nerubatsiro rwePC, smartphone kana piritsi. Iyo network yakanyorwa kuti: RFDALI_ + kero yayo yega MAC. Isa network yayo kero mubrowser: 192.168.1.1
  
• Settings mu web interface
  • Mu web interface, iyo unit ine mana ekutanga ma tabo ezvirongwa: CONTROLLERS, DALI DEVICES uye PAIRING uye tebhu DOCUMENTATION.
• CONTROLLES tab
  • Iyo CONTROLLERS tebhu inoshandiswa kubatanidza vatongi kune iyo RFDALI controller vachishandisa yakasarudzika RF Kero. Izvi zvakafanana nemanyorero pairing, kana iwe wakambopaira vatyairi nemaoko, unovaona mune rondedzero yemakero akapetwa.
  • Kubatanidza: tinoisa kero yeRF mundima yeADDRESS, mundima yeLABEL tinowedzera zita remutongi mune chero chimiro kuti zvive nyore kutarisa, mundima yeBUTTONS tinoisa nhamba chaiyo yemabhatani ekutonga. Press the
  • PAIR bhatani kuchengetedza controller mundangariro. Mushure mekuita pairing, mutyairi anoonekwa mune iyo rondedzero uye mushandisi ane sarudzo yekugadzirisa kana kudzima mutyairi.
  • Chenjerera: Ma controller ane 6 mabhatani, akadai seRF KEY-60, ane kero mbiri.
• DALI DEVICES tab
  • Bhatani re SCAN THE BUS rinovhura otomatiki kutsvaga kweDALI zvishandiso mubhazi.
    Sezvo RFDALI controller ichitsvaga maturusi ese ari mubhazi reDALI kana yakabatana kekutanga uye oisanganisa kuita kero imwe chete yekudzora, gara uchimisikidza kutsvaga kweDALI zvishandiso usati watanga kugovera mabhatani ega ega kumidziyo yakasarudzwa.
  • Zvichienderana nehuwandu hwemidziyo yeDALI yakabatana, kutsvaga kunogona kutora maminetsi mashanu. Zvishandiso zveDALI zvakatsvaga zvinozoonekwa mune rondedzero. Shandisa bhatani reEDIT kuisa zita remudziyo weDALI mundima yeLABEL. Nerubatsiro rwebhatani rine chiratidzo chePLAY, zvishandiso zvakasarudzwa zvinogona kudzorwa nemaoko mukuyedza mode. Bhatani rine chiratidzo cheTRASH BASKET rinodzima mudziyo weDALI watsvaga.
• DOCUMENTATION tab
  • Iyo DOCUMENTATION tebhu ine yakadzama bhuku remudziyo uye hunyanzvi hwayo paramita.
• Kukurukurirana nechikumbiro
  • Iyo RFDALI controller inogona kudzorwa muNELS app. Basa racho rinoitwa uchishandisa kero yeRF pane mudziyo kana mu web interface mu CONTROLLERS tebhu mumunda yero.
  • Chenjerera: Iyo RFDALI controller inogona kudzorwa kubva kuapp senge imwe nzvimbo yekudzora kune ese DALI kero mubhazi.
• PAIRING tab
  • Iyo PAIRING tebhu inoshandiswa kugovera munhu mabhatani ega ega uye mabasa kune akasarudzwa RFDALI zvishandiso. Muchikamu cheDEVICE, sarudza RFDALI mudziyo. Muchikamu cheFUNCTION, tinopa imwe yeyuniti preset mabasa, ayo anotsanangurwa muMashandiro uye hurongwa kune iNELS Wireless controllerс (1-7). Muchikamu che CONTROLLERS, ndinosarudza mutongi wandinoda kudzora mudziyo uye mundima yeBUTTON ini ndinosarudza bhatani rakananga remutongi randinoda kudzora naro. Simbisa marongero nekudzvanya bhatani reCREATE. Maseti angu epairi anozoonekwa mune rondedzero iri pazasi.
  • Chenjerera: DALI zvishandiso uye mabhatani ekudzora akapetwa neiyi nzira haachakwanise kudzimwa kubva pane rondedzero muDALI DEVICES uye CONTROLLERS tabu. Kana iwe uchida kuvabvisa, iwe unofanirwa kutanga wadzima ese akagadzirwa pairings umo izvi zvishandiso kana madhiraivha anoshandiswa.

Technical parameters

Mugove voltage:	230 V AC
Mugove voltage frequency:	50-60 Hz
Zviripachena kupinza:	7 VA / cos φ = 0.1
Dissipated power:	0.7 W
Mugove voltage tolerance:	+10 %; -15 %
Output
Nhamba yevanobatika:	1x kuchinja / 1x spinací			2xswitching / 2x spinací
Rated current:	8 A / AC1
Kuchinja simba:	2000 VA / AC1
Peak current:	10 A / <3 p
Kuchinja voltage:	250 V AC1
Mechanical service life:	1×107
Hupenyu hwesevhisi yemagetsi (AC1):	1×105
Kudzora
Wireless:	25-channel/ 25 kanálů			2 x 12-zviteshi / kanály
Nhamba yemabasa:	6	1	6	6
Communication protocol:	RFIO2
Frequency:	866–922 MHz (kuti uwane mamwe mashoko ona p. 74)/ 866–922 MHz (kureva str. 74)
Repeater basa:	hongu/ hongu
Manual control:	bhatani PROG (ON/OFF)/ tlačítko PROG (ON/OFF)
Bhatani rekunze / chinja: Range:	hongu/ hongu
Mamwe data	munzvimbo yakazaruka inosvika 200 m/ na volném prostranství až 200 m
Kushanda tembiricha:
Nzvimbo yekushandisa:	-15 kusvika +50 °C
Nzvimbo yekushandisa:	chero/ libovolná
Kukwidza:	mahara pawaya dzinotungamira/ volné na přívodních vodičích
Dziviriro:	IP40
Kupfuuratage category:	III.
Contamination degree:	2
Connection:	screwless terminals/ bezšroubové svorky
Kubatanidza conductor:	0.2-1.5 mm2 yakasimba/inochinjika/ 0.2-1.5 mm2 pevný/pružný
Dimensions:	43 x 44 x 22 mm
Kurema	31g			45 g
Zviyero zvinoenderana:	EN 60730, EN 63044, EN 300 220, EN 301 489

Kupinza bhatani rekudzora kuri pakugovera voltage zvinogona.

• Chenjerera:
  Paunoisa iNELS RF Kudzora sisitimu, iwe unofanirwa kuchengetedza yakaderera kureba 1 cm pakati pemayuniti ega ega. Pakati pemirairo yega yega inofanira kunge iri nguva ye1s.
• Yambiro
• Bhuku rekuraira rakagadzirirwa kuiswa uye zvakare kumushandisi wemudziyo. Iyo inogara iri chikamu chekurongedza kwayo. Kuiswa uye kubatana kunogona kuitwa chete nemunhu ane hunyanzvi hwakakwana pakunzwisisa bhuku rino rekuraira uye mabasa echishandiso, uye uchicherekedza ese anoshanda mirau. Dambudziko-risina basa remudziyo rinoenderanawo nekufambisa, kuchengetedza uye kubata. Kana iwe ukaona chero chiratidzo chekukuvara, deformation, kusashanda kana kushayikwa chikamu, usaise mudziyo uyu woudzosera kumutengesi wayo. Izvo zvinodiwa kubata chigadzirwa ichi uye zvikamu zvacho semarara emagetsi mushure mekupera kwehupenyu hwayo. Usati watanga kuisirwa, ita shuwa kuti waya dzese, dzakabatanidzwa zvikamu kana materminals akadzikiswa. Paunenge uchikwira uye kusevhisi cherechedza mirau yekuchengetedza, zvimiro, mirairo uye nyanzvi, uye mirairo yekunze yekushanda nemagetsi emagetsi. Usabate zvikamu zvechishandiso zvine simba - hupenyu hwekutyisidzira. Nekuda kwekufambiswa kwechiratidzo cheRF, tarisa nzvimbo chaiyo yezvikamu zveRF muchivakwa chiri kuisirwa. RF Kudzora inosarudzirwa chete kukwirisa mukati memukati. Midziyo haina kusarudzirwa kuiswa mukati mekunze uye munzvimbo dzine hunyoro. Iyo haifanirwe kuisirwa musimbi switchboards uye mumapurasitiki switchboards ane simbi gonhi - transmissivity yeRF chiratidzo hazvigoneke. RF Kudzora haikurudzirwe kune pulleys etc. - radiofrequency signal inogona kudzivirirwa nekuvharisa, interrered, bhatiri re transceiver rinogona kuwana fl at etc. uye nokudaro kudzima remote control.
• ELKO EP inozivisa kuti mhando yeRFSAI-xxB-SL yemidziyo inowirirana neDirectives 2014/53/EU, 2011/65/EU, 2015/863/EU uye 2014/35/EU. Iyo yakazara EU Declaration of Conformity iri pa:
• https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—-rfsai-11b-sl
• https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—-rfsai-61b-sl
• https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—rfsai-62b-sl
• https://www.elkoep.com/switch-unit-with-input-for-external-button-1-channel—-rfsai-61bpf-sl
• Tel.: +420 573 514 211, e-mail: elko@elkoep.com, www.elkoep.com
• ELKO EP, sro
• e-mail: elko@elkoep.cz
• Tsigiro: +420 778 427 366
• www.elkoep.com

Zvinyorwa / Zvishandiso

Elko EP RFSAI-62B-SL Switch Unit Ine Izvo Zvinopinza ZveMabhatani Ekunze [pdf] Bhuku reMirayiridzo RFSAI-62B-SL Switch Unit Ine Zvinopinza ZveMabhatani Ekunze, RFSAI-62B-SL, Chinja Chikamu Nezvinopinza ZveMabhatani Ekunze, Chikamu Nezvekupinda Mabhatani Ekunze, Zvinopinza Zvemabhatani Ekunze, Zvinopinza Zvekunze Mabhatani, Ekunze Mabhatani. , Mabhatani

References

• User Manual