AOC C32G2AE LCD Monitor Manual
Tsaro
Taron kasa
Ƙananan sassan da ke gaba suna bayyana ƙa'idodin ƙa'idodin da aka yi amfani da su a cikin wannan takarda.
Bayanan kula, Gargaɗi, da Gargaɗi
A cikin wannan jagorar, tubalan rubutu na iya kasancewa tare da gunki kuma a buga shi da nau'in m ko cikin nau'in rubutun. Waɗannan tubalan bayanin kula ne, gargaɗi, da gargaɗi, kuma ana amfani da su kamar haka:
NOTE: NOTE yana nuna mahimman bayanai waɗanda ke taimaka maka yin amfani da tsarin kwamfutarka da kyau.
HANKALI: Tsanaki yana nuna yiwuwar lalacewar hardware ko asarar bayanai kuma yana gaya muku yadda zaku guje wa matsalar.
GARGADI: GARGAƊI yana nuna yuwuwar cutar da jiki kuma yana gaya muku yadda zaku guje wa matsalar. Wasu gargaɗin na iya bayyana a madadin tsari kuma ƙila ba su tare da gunki. A irin waɗannan lokuta, ƙayyadaddun gabatar da gargaɗin yana da izini ta hanyar hukuma
Ya kamata a yi aiki da mai saka idanu kawai daga nau'in tushen wutar lantarki da aka nuna akan lakabin. Idan ba ku da tabbacin nau'in wutar lantarki da ake bayarwa ga gidanku, tuntuɓi dillalin ku ko kamfanin wutar lantarki na gida.
Ana sanye da na'urar saka idanu tare da filogi mai tushe mai fuska uku, filogi mai fini na uku (ƙasa). Wannan filogi zai dace ne kawai a cikin madaidaicin wutar lantarki azaman fasalin aminci. Idan hanyar sadarwar ku ba ta ɗauki filogin waya uku ba, sa ma'aikacin wutar lantarki ya shigar da madaidaicin wurin, ko amfani da adaftan don ƙasa na'urar lafiya. Kar a kayar da manufar aminci na filogi mai tushe.
Cire na'urar yayin guguwar walƙiya ko lokacin da ba za a yi amfani da shi na dogon lokaci ba. Wannan zai kare na'urar duba daga lalacewa saboda hauhawar wutar lantarki.
Kar a yi lodin igiyoyin wuta da igiyoyin tsawo. Yin lodin abu zai iya haifar da gobara ko girgiza wutar lantarki.
Don tabbatar da aiki mai gamsarwa, yi amfani da na'urar saka idanu kawai tare da kwamfutoci da aka jera UL waɗanda ke da madaidaitan madaidaitan ma'auni masu alama tsakanin 100-240V AC, Min. 5A.
Za a shigar da soket ɗin bango a kusa da kayan aiki kuma ya zama mai sauƙi.
Shigarwa
Kada ka sanya na'urar a kan keken mara tsayayye, tsayawa, tawul, sashi, ko teburi. Idan mai saka idanu ya faɗi, zai iya cutar da mutum kuma ya haifar da mummunar lalacewa ga wannan samfurin. Yi amfani da keken keke, tsayawa, tafkuna, madaidaici, ko tebur wanda masana'anta suka ba da shawarar ko aka sayar da wannan samfur. Bi umarnin masana'anta lokacin shigar da samfurin kuma yi amfani da na'urorin haɗi waɗanda masana'anta suka ba da shawarar. Ya kamata a motsa haɗin samfur da cart tare da kulawa.
Kada a taɓa tura kowane abu zuwa cikin ramin kan ma'aunin saka idanu. Yana iya lalata sassan da'ira da ke haifar da gobara ko girgiza wutar lantarki. Kada a taɓa zubar ruwa a kan duba.
Kada a sanya gaban samfurin a ƙasa.
Idan ka dora na'urar a kan bango ko shiryayye, yi amfani da kayan hawan da masana'anta suka amince da shi kuma bi umarnin kit.
Bar wasu sarari a kusa da mai duba kamar yadda aka nuna a ƙasa. In ba haka ba, zazzagewar iska na iya zama rashin isasshe don haka zafi fiye da kima na iya haifar da gobara ko lalata na'urar duba.
Duba ƙasa da shawarwarin wuraren samun iska a kusa da mai saka idanu lokacin da aka shigar da na'urar a bango ko a tsaye:
Tsaftace majalisa akai-akai da zane. Kuna iya amfani da abu mai laushi don shafe tabon, maimakon mai ƙarfi-dotergent wanda zai kula da majalisar samfurin.
Lokacin tsaftacewa, tabbatar da cewa ba a zubar da wanki a cikin samfurin ba. Tufafin tsaftacewa bai kamata ya zama mai tauri ba saboda zai tarar da fuskar allo.
Da fatan za a cire haɗin wutar lantarki kafin tsaftace samfurin.
Idan samfurin yana fitar da wani bakon kamshi, sauti ko hayaki, cire haɗin wutar lantarki NAN TAKE kuma tuntuɓi Cibiyar Sabis.
Tabbatar cewa ba'a toshe wuraren buɗewar da tebur ko labule.
Kada a sa na'urar duba LCD a cikin tsananin girgiza ko yanayin tasiri yayin aiki.
Kar a ƙwanƙwasa ko sauke na'urar duba yayin aiki ko sufuri.
Saita
Abubuwan da ke cikin Akwati
Ba duk kebul na sigina ba za a samar da shi ga duk ƙasashe da yankuna. Da fatan za a bincika tare da dila na gida ko ofishin reshe na AOC don tabbatarwa.
Saita Tsaya & Tushe
Da fatan za a saita ko cire tushe ta bin matakan kamar ƙasa.
Saita:
Cire:
Daidaitawa Viewcikin Angle
Don mafi kyau duka viewAna ba da shawarar duba cikakkiyar fuskar mai duba, sannan daidaita kusurwar mai duba zuwa naka zaɓi. Rike tsayawar don kada ku kifar da mai duba lokacin da kuka canza kusurwar mai duba.
Kuna iya daidaita mai duba kamar a ƙasa:
NOTE:
Kada ku taɓa allon LCD lokacin da kuke canza kusurwa. Yana iya haifar da lalacewa ko karya allon LCD.
Haɗa Monitor
Haɗin Kebul A Bayan Kula da Kwamfuta:
- HDMI-2
- HDMI-1
- DisplayPort
- D-SUB
- Sauti a ciki
- Wayar kunne
- Ƙarfi
- Haɗa igiyar wutar lantarki zuwa bayan nuni da ƙarfi.
- Kashe kwamfutarka kuma cire igiyoyin wutar lantarki.
- Haɗa kebul ɗin siginar nuni zuwa mai haɗin bidiyo a bayan kwamfutarka.
- Toshe igiyar wutar lantarki na kwamfutarku da nunin ku zuwa mashigar da ke kusa.
- Kunna kwamfutarka kuma nunawa.
Idan duban ku ya nuna hoto, shigarwa ya cika. Idan baya nuna hoto, da fatan za a duba Shirya matsala.
Don kare kayan aiki, koyaushe kashe PC da LCD duba kafin haɗawa.
Adaptive-Sync aiki
- Ayyukan Adawa-Sync yana aiki tare da DP/HDMI
- Katin Zane mai jituwa: Jerin shawarwari kamar na ƙasa ne, kuma ana iya bincika ta ziyartar www.AMD.com
- Jerin Radeon ™ RX Vega
- Radeon series RX 500 jerin
- Radeon series RX 400 jerin
- Radeon™ R9/R7 300 jerin (R9 370/X, R7 370/X, R7 265 sai dai)
- Radeon Pro Duo (2016)
- Jerin Radeon ™ R9 Nano
- Radeon™ R9 Fury jerin
- Jerin Radeon ™ R9/R7 200 (R9 270/X, R9 280/X ban da)
Daidaitawa
Hotkeys
| 1 | Source/Auto/Fita |
| 2 | Yanayin Wasan |
| 3 | Kiran Kira |
| 4 | Menu/Shiga |
| 5 | Ƙarfi |
Menu/Shiga
Latsa don nuna OSD ko tabbatar da zaɓin.
Ƙarfi
Danna maɓallin wuta don kunna mai duba.
Kiran Kira
Lokacin da babu OSD, danna maɓallin Dial Point don nunawa / ɓoye Dial Point.
Yanayin Wasan
Lokacin da babu OSD, danna maɓallin "" don buɗe aikin yanayin wasan, sannan danna maɓallin "" ko "" don zaɓar yanayin wasan (FPS, RTS, Racing, Gamer 1, Gamer 2 ko Gamer 3) dangane da nau'ikan wasan. .
Source/Auto/Fita
Lokacin da OSD ke rufe, danna Maɓallin Maɓalli/Auto/Fita zai zama aikin maɓallin zafi mai zafi. Lokacin da OSD ke rufe, danna Maɓallin Maɓalli/Auto/Fita ci gaba da kusan daƙiƙa 2 don daidaitawa ta atomatik (kawai don samfuran tare da D-Sub).
- Danna maɓallin
MENU-maballin don kunna taga OSD. - Latsa Hagu ko Dama don kewaya ayyukan. Da zarar aikin da ake so ya haskaka, danna maɓallin MENU-maballin don kunna shi, danna Hagu ko Dama don kewaya cikin ayyukan ƙananan menu. Da zarar aikin da ake so ya haskaka, danna MENU-maballin don kunna shi.
- Danna Hagu ko don canza saitunan aikin da aka zaɓa. Latsa
fita. Idan kana son daidaita kowane aiki, maimaita matakai 2-3. - Aikin Kulle OSD: Don kulle OSD, latsa ka riƙe MENU-maballin yayin da Monitor ke kashe sannan
latsa maɓallin wuta don kunna mai duba. Don buɗe OSD - latsa ka riƙe MENU-maballin yayin da aka kashe mai saka idanu sannan danna maɓallin wuta don kunna mai duba.
- Idan samfurin yana da shigarwar siginar guda ɗaya kawai, abu na "Input Select" yana kashe don daidaitawa.
- Hanyoyin ECO (sai dai Standard yanayin), yanayin DCR, yanayin DCB da Boost Hoto, na waɗannan jihohi huɗu waɗanda jiha ɗaya kaɗai ke iya wanzuwa.
 |
Kwatancen | 0-100 | Bambanci daga Dijital-rejista. | |
| Haske | 0-100 | Daidaita Hasken Baya | ||
| Yanayin Eco | Daidaitawa |  |
Daidaitaccen Yanayin | |
| Rubutu |  |
Yanayin rubutu | ||
| Intanet |  |
Yanayin Intanet | ||
| Wasan |  |
Yanayin Wasan | ||
| Fim |  |
Yanayin Fim | ||
| Wasanni |  |
Yanayin Wasanni | ||
| Karatu |  |
Yanayin Karatu | ||
| Gamma | Gamma 1 | Daidaita zuwa Gamma 1 | ||
| Gamma 2 | Daidaita zuwa Gamma 2 | |||
| Gamma 3 | Daidaita zuwa Gamma 3 | |||
| DCR | Kashe |  |
Kashe rabo mai banbanci mai tsauri | |
| On | Kunna rabo mai banbanci mai tsauri | |||
| Yanayin HDR | Kashe | Zaɓi Yanayin HDR. | ||
| Hoto na HDR | ||||
| Fim ɗin HDR | ||||
| Wasan HDR | ||||
Lura:
Lokacin da aka saita "Yanayin HDR" zuwa "mara-kashewa", abubuwan "Bambanci", "Haske", "Gamma" ba za a iya daidaita su ba.
 |
Agogo | 0-100 | Daidaita agogon hoto don rage amo a tsaye-Layi. |
| Mataki | 0-100 | Daidaita Matakin Hoto don rage amo a tsaye-Line | |
| Kaifi | 0-100 | Daidaita kaifin hoto | |
| H. Matsayi | 0-100 | Daidaita matsayi a kwance na hoton. | |
| V. Matsayi | 0-100 | Daidaita matsayi na tsaye na hoton. |
Saita Launi
 |
Zazzabi Launi. | Dumi | Tuna Zazzaɓin Launi mai Dumi daga EEPROM. | |
| Na al'ada | Tuna Yanayin Launi na Al'ada daga EEPROM. | |||
| Sanyi | Tuna Zazzaɓin Launi mai sanyi daga EEPROM. | |||
| sRGB | Tuna Yanayin Launi na SRGB daga EEPROM. | |||
| Mai amfani | Mayar da zafin launi daga EEPROM. | |||
| Yanayin DCB | Cigaba | Kunna Ko Kashe | A kashe ko Kunna Cikakken Yanayin Haɓakawa | |
| Nature Fata | Kunna Ko Kashe | A kashe ko Kunna Yanayin fata na yanayi | ||
| Filin Green | Kunna Ko Kashe | A kashe ko Kunna Yanayin Filin Kore | ||
| Sky-blue | Kunna Ko Kashe | A kashe ko Kunna Yanayin Sky-blue | ||
| Gano kansa | Kunna Ko Kashe | A kashe ko Kunna Yanayin AutoDetect | ||
| Demo na DCB | Kunna Ko Kashe | A kashe ko Kunna Demo | ||
| Ja | 0-100 | Jan riba daga Digital-rejista. | ||
| Kore | 0-100 | Green riba daga Digital-rejista. | ||
| Blue | 0-100 | Blue riba daga Digital-rejista. |
Lokacin da aka saita "Yanayin HDR" a ƙarƙashin "Hasken haske" zuwa "mara kashewa", duk abubuwan da ke ƙarƙashin "Saitin Launi" ba za a iya daidaita su ba.
Haɓaka Hoto
 |
Firam mai haske | kunnawa ko kashewa | A kashe ko Kunna Firam mai haske |
| Girman Firam | 14-100 | Daidaita Girman Firam | |
| Haske | 0-100 | Daidaita Tsarin Haske | |
| Kwatancen | 0-100 | Daidaita Ma'auni na Frame | |
| H. matsayi | 0-100 | Daidaita Frame a kwance Matsayi | |
| V. matsayi | 0-100 | Daidaita Frame Matsayi na tsaye |
Lura:
Daidaita haske, bambanci, da matsayi na Firam ɗin Haske don mafi kyau viewgwaninta.
 |
Harshe | Zaɓi harshen OSD | |
| Lokaci ya ƙare | 5-120 | Daidaita Lokacin OSD | |
| Damar DP | 1.1/1.2 | Idan abun cikin bidiyo na DP yana goyan bayan DP1.2, don Allah zaɓi DP1.2 don Ƙarfin DP; in ba haka ba, don Allah zaɓi DP1.1. Da fatan za a lura cewa DP1.2 kawai ke goyan bayan aikin Adaptive-Sync | |
| H. Matsayi | 0-100 | Daidaita matsayi na kwance na OSD | |
| V. Matsayi | 0-100 | Daidaita matsayi na OSD a tsaye | |
| Ƙarar | 0-100 | Daidaita Ƙarar. | |
| Gaskiya | 0-100 | Daidaita nuna gaskiya na OSD | |
| Tunatarwa Hutu | kunnawa ko kashewa | Rage tunatarwa idan mai amfani ya ci gaba da aiki fiye da awa 1 | |
| Madaidaicin Counter | Kashe / Dama- sama / Dama-saukar / Hagu- ƙasa / Hagu- Sama | Nuna mitar V akan kusurwar da aka zaɓa |
 |
Yanayin Wasan | FPS | Don kunna wasannin FPS (Masu harbin Mutum na farko). Yana haɓaka bayanan matakin baƙar fata mai duhu. |
| RTS | Don kunna RTS (Dabarun Lokaci na Gaskiya). Yana inganta ingancin hoto. | ||
| Racing | Don yin wasannin tsere, Yana ba da lokacin amsa mafi sauri da jikewar launi. | ||
| Gamer 1 | An adana saitunan zaɓin mai amfani azaman Gamer 1. | ||
| Gamer 2 | An adana saitunan zaɓin mai amfani azaman Gamer 2. | ||
| Gamer 3 | An adana saitunan zaɓin mai amfani azaman Gamer 3. | ||
| Kashe | Babu haɓakawa ta hanyar wasan hoto na Smart | ||
| Ikon Inuwa | 0-100 | Shadow Control Default shine 50, sannan mai amfani na ƙarshe zai iya daidaitawa daga 50 zuwa 100 ko 0 don ƙara bambanci don bayyananniyar hoto.1. Idan hoto ya yi duhu sosai don a gan shi dalla-dalla, daidaitawa daga 50 zuwa 100 don bayyananniyar hoto.2. Idan hoton ya yi fari da yawa don a gan shi dalla-dalla, yana daidaitawa daga 50 zuwa 0 don bayyananniyar hoto | |
| Launin Wasan | 0-20 | Launin Wasan zai ba da matakin 0-20 don daidaitawa don samun ingantacciyar hoto. | |
| Ƙarƙashin Yanayin Blue | Karatu / Office / Intanet / Multimedia / A kashe | Rage igiyar hasken shuɗi ta hanyar sarrafa zafin launi. | |
| Karancin Shigar Lag | Kunna/Kashe | Kashe firam ɗin buffer don rage jinkirin shigarwa | |
| Overdrive | Mai rauni | Daidaita lokacin amsawa. | |
| Matsakaici | |||
| Mai ƙarfi | |||
| Ƙara | |||
| Kashe | |||
| MBR | 0 ~ 20 | Daidaita Mutuwar Rufewar Motsi. | |
| Adaptive-Sync | kunnawa ko kashewa | A kashe ko kunna Adaptive-Sync.Adaptive-Sync Run Tunatarwa: Lokacin da aka kunna fasalin Adafta-Sync, ana iya samun walƙiya a wasu wuraren wasan. |
- Ayyukan MBR da Overdrive Boost suna samuwa ne kawai lokacin da Adaptive-Sync ke kashe kuma mitar tsaye ta kai 75 Hz.
- Za a rage hasken allo lokacin daidaita saitin direba ko MBR zuwa Boost.
- Lokacin da aka saita "Yanayin HDR" a ƙarƙashin "Haske" zuwa "mara-kashewa", abubuwan "Yanayin Wasan", "Sarrafa Shadow", "Launin Wasanni", "Ƙananan Yanayin Blue" ba za a iya daidaita su ba.
 |
Input Zabi | Zaɓi Tushen Siginar shigarwa | |
| Sanya atomatik. | Ee ko A'a | Daidaita hoton ta atomatik zuwa tsoho | |
| A kashe mai ƙidayar lokaci | 0hrs | Zaɓi lokacin kashe DC | |
| Girman Hoto | Fadi | Zaɓi rabon hoto don nunawa. | |
| 4:3 | |||
| 1:1 | |||
| 17" (4:3) | |||
| 19" (4:3) | |||
| 19" (5:4) | |||
| 19 W (16:10) | |||
| 21.5 W (16:9) | |||
| 22 W (16:10) | |||
| 23 W (16:9) | |||
| 23.6 W (16:9) | |||
| 24 W (16:9) | |||
| 27 W (16:9) | |||
| DDC/CI | Ee ko A'a | Kunna/KASHE Tallafin DDC/CI | |
| Sake saiti | Ee ko A'a | Sake saita menu zuwa tsoho |
 |
Fita | Fita daga babban OSD |
Alamar LED
| Matsayi | Launi na LED |
| Cikakken Yanayin Ƙarfi | Fari |
| Yanayin Kashe Aiki | Lemu |
Shirya matsala
| Matsala & Tambaya | Mahimman Magani |
| Wutar Wuta Ba a Kunnawa | Tabbatar cewa maɓallin wuta yana kunne kuma Igiyar Wutar tana haɗe da kyau zuwa tashar wutar lantarki ta ƙasa da kuma na'urar duba. |
| Babu hotuna akan allon |
|
| Hoto Mai Haushi ne & Yana Da Matsalolin Shadowing Fatalwa | Daidaita Kwatancen da Gudanar da Haske. Latsa don daidaitawa ta atomatik. Tabbatar cewa ba kwa amfani da kebul na tsawo ko akwatin canzawa. Muna ba da shawarar toshe na'urar kai tsaye zuwa mai haɗa fitarwar katin bidiyo a baya. |
| Hoto Bounces, Flickers Ko Tsarin Kalamai Ya Bayyana A Hoton | Matsar da na'urorin lantarki waɗanda zasu iya haifar da tsangwama na lantarki zuwa nesa da mai duba yadda zai yiwu.Yi amfani da matsakaicin matsakaicin ƙimar na'urar duban ku akan ƙudurin da kuke amfani da shi. |
| Monitor yana Makale A Yanayin Kashe Aiki" | Ya kamata Maɓallin Wutar Lantarki na Kwamfuta ya kasance a wurin ON.Katin Bidiyon Kwamfuta ya kamata a sanya shi da kyau a cikin raminsa. Tabbatar cewa kebul na bidiyo na na'urar yana da alaƙa da kwamfutar yadda ya kamata. Duba kebul ɗin bidiyo na mai duba kuma tabbatar da cewa babu fil ɗin da aka lanƙwasa. Tabbatar cewa kwamfutarka tana aiki ta hanyar buga maɓallin LOCK na CAPS akan madannai yayin lura da CAPS LOCK LED. LED ya kamata ya kunna ko Kashe bayan buga maɓallin LOCK na CAPS. |
| Rasa ɗayan manyan launuka (RED, GREEN, ko BLUE) | Duba kebul na bidiyo na mai saka idanu kuma tabbatar da cewa babu fil da ya lalace. Tabbatar cewa kebul ɗin bidiyo na mai duba yana da alaƙa da kwamfutar yadda ya kamata. |
| Hoton allo baya tsakiya ko girmansa yadda ya kamata | Daidaita H-Position da V-Position ko latsa hot-key (AUTO). |
| Hoton yana da lahani masu launi (farin ba ya kama da fari) | Daidaita launi RGB ko zaɓi zafin launi da ake so. |
| Rikici a kwance ko a tsaye akan allon | Yi amfani da yanayin rufe Windows 7/8/10 don daidaita CLOCK da FOCUS. Danna don daidaitawa ta atomatik. |
| Ka'ida & Sabis | Da fatan za a koma zuwa Doka & Bayanin Sabis wanda ke cikin littafin CD ko www.aoc.com (don nemo samfurin da kuka saya a cikin ƙasarku kuma don nemo Dokoki & Bayanin Sabis a shafi na Tallafi. |
Ƙayyadaddun bayanai
Ƙididdigar Gabaɗaya
| Panel | Sunan samfurin | Saukewa: C32G2AE | ||
| Tsarin tuki | TFT launi LCD | |||
| Viewiya Girman Hoto | 80.1 cm diagonal | |||
| Matsakaicin pixel | 0.36375mm(H) x 0.36375mm(V) | |||
| Bidiyo | HDMI lnterface & DP Interface & VGA Interface | |||
| Rarraba Daidaitawa. | H/V TTL | |||
| Nuni Launi | 16.7M Launuka | |||
| Wasu | Takaitaccen sikelin sikelin | 30k-160kHz(D-SUB)30k-200kHz(HDMI, DP) | ||
| Girman sikanin kwance (Mafi girman) | 698.4mm ku | |||
| Tsayin sikelin tsaye | 48-144Hz(D-SUB)48-165Hz(HDMI, DP) | |||
| Girman Duban Tsaye (Mafi girman) | 392.85mm ku | |||
| Mafi kyawun ƙudurin saiti | 1920×1080@60Hz | |||
| Matsakaicin ƙuduri | 1920×1080@60Hz(D-SUB)1920×1080@165Hz(HDMI, DP) | |||
| Toshe & Kunna | VESA DDC2B/CI | |||
| Siginar Bidiyo ta Shiga ciki | Analog: 0.7Vp-p (daidaitacce), 75 OHM, TMDS | |||
| Tushen wutar lantarki | 100-240V ~, 50/60Hz | |||
| Amfanin Wuta | Na al'ada (Tsohuwar haske da bambanci) | 40W | ||
| Max. (haske = 100, bambanci = 100) | ≤65W | |||
| Ajiye wuta | ≤0.5W | |||
| Halayen Jiki | Nau'in Haɗawa | VGA/HDMI/DP/Fitar da kunne/Audio in | ||
| Nau'in Siginar Kebul | Mai iya cirewa | |||
| Muhalli | Zazzabi | Aiki | 0° ~ 40° | |
| Mara Aiki | -25° ~ 55° | |||
| Danshi | Aiki | 10% ~ 85% (ba mai sanyawa) | ||
| Mara Aiki | 5% ~ 93% (ba mai sanyawa) | |||
| Tsayi | Aiki | 0 ~ 5000 m (0 ~ 16404 ft) | ||
| Mara Aiki | 0 ~ 12192m (0 ~ 40000ft) | |||
Hanyoyin Nuni da Saiti
| STANDARD | HUKUNCI | TAKAITACCEN HANKALI (kHz) | GASKIYAR TSAYUWA (Hz) |
| VGA | 640×480@60Hz | 31.469 | 59.94 |
| VGA | 640×480@67Hz | 35 | 66.667 |
| VGA | 640×480@72Hz | 37.861 | 72.809 |
| VGA | 640×480@75Hz | 37.5 | 75 |
| VGA | 640×480@100Hz | 51.08 | 99.769 |
| VGA | 640×480@120Hz | 61.91 | 119.518 |
| Tsarin DOS | 720×400@70Hz | 31.469 | 70.087 |
| Tsarin DOS | 720×480@60Hz | 29.855 | 59.710 |
| SD | 720×576@50Hz | 31.25 | 50 |
| Farashin SVGA | 800×600@56Hz | 35.156 | 56.25 |
| Farashin SVGA | 800×600@60Hz | 37.879 | 60.317 |
| Farashin SVGA | 800×600@72Hz | 48.077 | 72.188 |
| Farashin SVGA | 800×600@75Hz | 46.875 | 75 |
| Farashin SVGA | 800×600@100Hz | 63.684 | 99.662 |
| Farashin SVGA | 800×600@120Hz | 76.302 | 119.97 |
| Farashin SVGA | 832×624@75Hz | 49.725 | 74.551 |
| Farashin XGA | 1024×768@60Hz | 48.363 | 60.004 |
| Farashin XGA | 1024×768@70Hz | 56.476 | 70.069 |
| Farashin XGA | 1024×768@75Hz | 60.023 | 75.029 |
| Farashin XGA | 1024×768@100Hz | 81.577 | 99.972 |
| Farashin XGA | 1024×768@120Hz | 97.551 | 119.989 |
| WXGA+ | 1440×900@60Hz | 55.935 | 59.887 |
| SXGA | 1280×1024@60Hz | 63.981 | 60.02 |
| SXGA | 1280×1024@75Hz | 79.975 | 75.025 |
| HD | 1280×720@50Hz | 37.071 | 49.827 |
| HD | 1280×720@60Hz | 45 | 60 |
| HD | 1280×1080@60Hz | 67.173 | 59.976 |
| CVT | 1680×1050@60Hz | 64.674 | 59.883 |
| Cikakken HD | 1920×1080@60Hz | 67.5 | 60 |
| Cikakken HD | 1920×1080@100Hz | 113.21 | 99.93 |
| Cikakken HD | 1920×1080@120Hz | 137.26 | 119.982 |
| Cikakken HD | 1920×1080@144Hz | 158.1 | 144 |
| Cikakken HD | 1920×1080@165Hz | 183.154 | 165 |
Sanya Ayyuka
| Fil A'a | Sunan siginar | Fil A'a | Sunan siginar | Fil A'a | Sunan siginar |
| 1. | Bayanan TMDS 2+ | 9. | Bayanan TMDS 0- | 17. | DDC/CEC Ground |
| 2. | TMDS Data 2 Garkuwa | 10. | TMDS agogo + | 18. | + 5V Power |
| 3. | Bayanan TMDS 2- | 11. | Garkuwan agogo na TMDS | 19. | Gano Toshe mai zafi |
| 4. | Bayanan TMDS 1+ | 12. | Kwanan TMDS | ||
| 5. | Bayanan TMDS 1Shield | 13. | CEC | ||
| 6. | Bayanan TMDS 1- | 14. | Ajiye (NC akan na'urar) | ||
| 7. | Bayanan TMDS 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Garkuwa | 16. | SDA |
| Fil A'a | Sunan siginar | Fil A'a | Sunan siginar |
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (p) |
| 3 | ML_Lane 3 (p) | 13 | Sanyawa1 |
| 4 | ML_Lane 2 (n) | 14 | Sanyawa2 |
| 5 | GND | 15 | AUX_CH (shafi) |
| 6 | ML_Lane 2 (p) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Gano Toshe mai zafi |
| 9 | ML_Lane 1 (p) | 19 | Koma DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | DP_PWR |
15-Cable Signal Cable Signal Cable
| Fil A'a | Sunan siginar | Fil A'a | Sunan siginar |
| 1 | Bidiyo-Ja | 9 | +5V |
| 2 | Bidiyo-Green | 10 | Kasa |
| 3 | Bidiyo-Blue | 11 | NC |
| 4 | NC | 12 | DDC-Serial data |
| 5 | Gano Cable | 13 | H-aiki tare |
| 6 | GND-R | 14 | V-sync |
| 7 | GND-G | 15 | DDC-Serial agogo |
| 8 | GND-B |
Toshe kuma Kunna
Toshe & Kunna fasalin DDC2B
Wannan saka idanu yana sanye da damar VESA DDC2B bisa ga VESA DDC STANDARD. Yana ba mai saka idanu damar sanar da tsarin runduna ainihin sa kuma, dangane da matakin DDC da aka yi amfani da shi, sadar da ƙarin bayani game da iyawar nuninsa.
DDC2B tashar bayanai ce ta gaba-gaba bisa ka'idar I2C. Mai watsa shiri na iya buƙatar bayanin EDID akan tashar DDC2B.
Takardu / Albarkatu
 |
Bayani na AOC32G2AE [pdf] Manual mai amfani C32G2AE LCD Monitor, C32G2AE, LCD Monitor, Kulawa |
