TS710 - V2 સિંગલ ચેનલ ટાઈમર
સ્થાપન માર્ગદર્શિકા
TS710 - V2 સિંગલ ચેનલ ટાઈમર
FP720 - V2 ટુ ચેનલ પ્રોગ્રામર
સ્થાપન માર્ગદર્શિકા
1. સ્થાપન પગલાં
વપરાશકર્તા માર્ગદર્શિકા અહીંથી ડાઉનલોડ કરી શકાય છે: heating.danfoss.com.
- ઇન્સ્ટોલેશન અધિકૃત ઇલેક્ટ્રિશિયન દ્વારા થવું આવશ્યક છે.
- Remove and mount timer/programmer back plate
direct to wall or on wall box, and wire as required for
application, see fig. 1 & 2 on page 16. The backplate
included within the product packaging should be
used for the installation. - બેટરી બેકઅપ ટેબ દૂર કરો, ફિગ જુઓ. પૃષ્ઠ 3 પર 17.
- Locate hooks at top of timer/programmer into top of
back plate, lower into position and tighten retaining
ફીટ.
2. પરિમાણો અને વાયરિંગ
See fig. 4 for dimensions and fig. 5 for wiring diagram
on page 18 and page 19.
3. ટેકનિકલ વિશિષ્ટતાઓ
સ્પેસી કેશન્સ |
TS710 – V2 |
FP720 – V2 |
ઓપરેશન |
સતત ઉપયોગ |
|
સંચાલન ભાગtage |
230 Vac ± 10 % 50/60 Hz |
|
આઉટપુટ |
વોલ્ટ ફ્રી |
૨ x ૨૩૦ વેક |
સ્વિચ રેટિંગ |
3A (1) 230 Vac પર |
|
સ્વિચ પ્રકાર |
1x SPDT પ્રકાર 1B |
2x SPDT પ્રકાર 1 બી આંતરિક રીતે જોડાયેલ |
ટર્મિનલ્સ |
મહત્તમ 2.5 મીમી2 વાયર |
|
આઇપી રેટિંગ |
IP30 (ઇન્સ્ટોલ કરેલ) |
|
બાંધકામ |
EN60730-2-7 |
|
પ્રદૂષણને નિયંત્રિત કરો પરિસ્થિતિ |
ડિગ્રી 2 |
|
રેટ કરેલ આવેગ વોલ્યુમtage |
4 kV |
|
સોફ્ટવેર classi cation |
A |
|
સંગ્રહ શરતો |
સાપેક્ષ ભેજ 5 - 95% Ambient (storage and shipping) -10 to 60°C |
આ ઉત્પાદન ઘરેલું સેન્ટ્રલ હીટિંગ અને ઘરેલું ગરમ પાણીના નિયંત્રણ માટે ઇલેક્ટ્રોનિક હીટિંગ ટાઈમર/પ્રોગ્રામર છે.
ડેનફોસ લિ.
22 Wycombe End, HP9 1NB,
ડેનફોસ એ/એસ
ક્લાઈમેટ સોલ્યુશન્સ • danfoss.com • +45 7488 2222
કોઈપણ માહિતી, જેમાં ઉત્પાદનની પસંદગીની માહિતીનો સમાવેશ થાય છે, પરંતુ તેના સુધી મર્યાદિત નથી,
its application or use, product design, weight, dimensions, capacity or any other
technical data in product manuals, catalogues descriptions, advertisements, etc. and
whether made available in writing, orally, electronically, online or via download, shall
be considered informative, and is only binding if and to the extent, explicit reference is
made in a quotation or order confirmation. Danfoss cannot accept any responsibility
for possible errors in catalogues, brochures, videos and other material. Danfoss reserves
the right to alter its products without notice. This also applies to products ordered but
not delivered provided that such alterations can be made without changes to form, t
or function of the product. All trademarks in this material are property of Danfoss A/S
or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss
A/S. All rights reserved.
દસ્તાવેજો / સંસાધનો
![]() |
ડેનફોસ TS710 - V2 સિંગલ ચેનલ ટાઈમર [પીડીએફ] સ્થાપન માર્ગદર્શિકા TS710, FP720, TS710 - V2 સિંગલ ચેનલ ટાઈમર, TS710 - V2, સિંગલ ચેનલ ટાઈમર, ચેનલ ટાઈમર |