Pròiseasar Wavelaunch DSP Dìleab
Stiùireadh airson cleachdadh bathar
- The high definition Digital Wavelaunch Processor hosts a LEGACY custom algorithm that automatically loads when the processor is powered on.
- Factory settings are ‘plug and play’ and do not require a computer to utilize. Connections between the preamp, cumhachd amplifier, agus gheibhear luchd-labhairt/subwoofer leis na luchd-labhairt/subwoofer agad.
- Attach the included IEC power cable to the rear of the unit, and flip the rear power switch by pushing. The front panel will load and display the name of the currently selected algorithm next to Scene.
- It is okay to leave the Wavelaunch processor on 24/7 as it draws minimal power.
- Faodar an roth dàta a thionndadh gu clì/deas gus luach a’ pharamadair a tha a’ priobadh air an sgrion a mheudachadh/a lùghdachadh. Ma bhrùthas tu an roth dàta a-steach, cuiridh tu an luach a-steach agus gluaisidh tu an cursair chun ath pharamadair.
- Wavelaunch provides parametric EQ options to further adjust Legacy speakers/subwoofers. Here’s how to adjust the EQ of the left Aeris XD speaker:
- Press the PEQ button located on the left of the front panel.
- Note the input channels A-D, with A corresponding to the left signal and B to the right signal from your preamplifier/surround processor.
- Brùth air a’ phutan cuir a-steach A.
- Rotate the rotary dial left/right to the desired setting. Press the dial in to progress to the next setting.
- Repeat steps for input B if applying adjustments to the right Aeris XD speaker.
- Press the data wheel again to exit once adjustments are done.
Suidheachadh luath
- The high definition Digital Wavelaunch Processor hosts a LEGACY custom algorithm that automatically loads when the processor is powered on.
- Factory settings are ‘plug and play’, and do not require a computer to utilize.
- Connections between the preamp, cumhachd amplifier, agus gheibhear luchd-labhairt/subwoofer leis na luchd-labhairt/subwoofer agad.
A' cur cumhachd air
- Attach the included IEC power cable to the rear of the unit, and flip the rear power switch by pushing I.
- The front panel will load and display the name of the currently selected algorithm next to “Scene”.
- Tha e ceart gu leòr am pròiseasar Wavelaunch fhàgail air 24/7 oir chan eil e a’ tarraing mòran cumhachd.
A’ meudachadh/a’ lughdachadh meud luchd-labhairt claisneachd/fo-fhuaimearan sean-fhasanta
Faodar an roth dàta a thionndadh gu clì/deas gus luach a’ pharamadair a tha a’ priobadh air an sgrion a mheudachadh/a lùghdachadh. Ma bhrùthas tu an roth dàta a-steach, cuiridh tu an luach a-steach agus gluaisidh tu an cursair chun ath pharamadair.
Cleachdaidh sinn an Legacy Aeris XD airson seo.ample, agus gabhamaid ris gum bu mhath leat meud (buannachd) earrann beus Aeris a mheudachadh.
- Press the “Gain” button located at the left of the front panel.
- Please note the 8 output channels at the far right of the front panel, labeled 1-8. Output channel 1 corresponds to the left Aeris active bass channel, and output channel 5 corresponds to the right Aeris active bass channel. Output 2 corresponds to the left Aeris upper section, and Output 6 corresponds to the right Aeris upper section, powered by your stereo amplosgadair.
- Press the output “1” button.
- The screen will update, and you will see a dB gain level- please rotate the rotary dial to the right to increase the volume level of the left bass section. Once the desired bass output on the left side is achieved, you can press the output “5” button and increase the volume level of the right bass section to the desired level.
- Once you are done with adjustments, you can press the data wheel again to exit.
A’ dèanamh atharrachaidhean EQ
Wavelaunch provides the user with parametric EQ options to further adjust your Legacy speakers/subwoofers.
Cleachdaidh sinn an Legacy Aeris XD airson seo.ampSeo mar a dh’atharraicheas tu EQ an neach-labhairt Aeris XD clì.
- Press the “PEQ” button located at the left of the front panel.
- Please note the 4 input channels at the right of the front panel, labeled A-D. Input channel A corresponds to the left signal, and channel B corresponds to the right signal from your preamplifier/surround processor.
- Press the input “A” button.
- The screen will update and you can rotate the rotary dial left/right to the desired setting. You can press the dial in to progress to the next setting.
- Repeat these steps for input “B” if you would like to apply the same PEQ adjustments to the right Aeris XD speaker.
- Once you are done with adjustments, you can press the data wheel again to exit.
Ceanglaichean
- A connection assignment printout is also included with your speaker/subwoofer to assist you in getting started.
Wavelaunch Processor Inputs
- Labeled A, B, C, D
- Typical speaker Assignments are A left signal, B right signal
- Please consult your speakers/subwoofers diagram for specific connections.
Wavelaunch Processor Outputs
- Labeled, 1, 2, 3, 4, 5, 6, 7, 8
- Typical speaker assignments are outputs 1-4 left signal, and outputs 5-8 right signal.
- Airson example, Aeris XD assignments Output channel 1 corresponds to the left Aeris active bass channel, and output channel 5 corresponds to the right Aeris active bass channel. Output 2 corresponds to the left Aeris upper section and Output 6 corresponds to the right Aeris upper section, powered by your stereo amplosgadair.
Goireasan Wavelaunch
- Inside the Wavelaunch processor carton packaging, you’ll find the included IEC power cable.
Sònrachaidhean
- Processor (DSP): 32-Bit Floating Point
- Analog Converters: Super Performance 24-bit
- Àireamh de phrògraman: 64
- Parametric EQ: 16 per channel
- Filters: Butterworth, Linkwitz-Riley & Bessel
- Connectors: 4 XLR In, 8 XLR Out, USB Type B
- Dynamic Range: 115 dB (unweighted)
- Distortion: ≤0.0025% @ 4dBu 20Hz-20KHz
- Frequency Response (Hz, +/- .1 dB): 20 to 20 kHz
- Meudan (HxWxD, òirleach): 2.6 x 19 x 10.6
- Cuideam: 7 lbs
- SampÌre ling: 96 kHz
Barantas
Legacy Audio supports its customers and products with pride. We cheerfully warrant our processors from defects in materials and workmanship for three (3) years. Please register your product with Legacy Audio. Should you require service, Legacy will require proof of purchase to honor the warranty, so please keep your receipt.
- Tha am barantas a ’buntainn ris an t-sealbhadair tùsail agus chan urrainnear a ghluasad.
- Tha am barantas a ’buntainn ri toraidhean a chaidh a cheannach bho“ Neach-reic Dìleab Ùghdarraichte ”.
- Am barantas air co-phàirtean gnìomhach leithid pròiseasairean didseatach no taobh a-staigh amplifiers air a chuingealachadh ri trì (3) bliadhna de chòmhdach.
- Leudaichidh am barantas air stoc reic airson dà bhliadhna aig a ’char as fhaide bhon fhàirdeal.
- Chan eil am barantas a’ còmhdach cosgaisean còmhdhail toraidh gu no bhon neach-ceannach, neach-cuairteachaidh no neach-reic, no milleadh luingeis co-cheangailte ris.
- Chan eil na suidheachaidhean no na cumhaichean a leanas air an còmhdach le barantas Dìleab Fuaim:
- Accidental damage, electrical abuse or associated equipment failure
- Use is inconsistent with the recommended operating instructions and specifications
- Milleadh air adhbhrachadh le atharrachadh no seirbheis gun chead
- Cosgaisean co-cheangailte ri toirt air falbh agus ath-shuidheachadh thoraidhean easbhaidheach. Milleadh a dh ’fhaodadh a bhith ann air toraidhean eile.
- Normal wear, such as fading of finishes due to sunlight.
Cùram
- If you wish to clean your Wavelaunch, use a diluted ammonia-based window cleaner.
- Do not use any abrasive cleaners or chemical solvents.
Do not block any ventilation openings. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. The power cable should be unplugged from the outlet during severe electrical storms or when unused for a long time. Grounding: Adequate precautions should be taken so that the grounding provisions built into an electrical product are never defeated.
All information contained in this manual is accurate to the best of our knowledge at the time of publication. In keeping with our policy of ongoing product improvement, we reserve the right to make changes to the design and features of our products without prior notice. A listing of Legacy Audio Dealers and Distributors can be found on the Legacy Audio weblàrach www.legacyaudio.com or by contacting Legacy Audio at: 3023 E. Sangamon Ave., Springfield, IL 62702, USA—Phone: +1 217-544-3178.
COMHRADH
- © 2025 Dìleab Fuaim
- 3023 E Sangamon Ave.
- Earrach, IL 62702
- Fòn: 800-283-4644
- Facs: 217-544-1483
Ceistean Cumanta
- What are the differences between the included Legacy Wavelaunch processor and the upgraded Legacy Wavelet 2 processor?
- There are quite a few technical differences between the two. The Wavelet 2 processes at 64 bits and has a more advanced correction algorithm. Most importantly, the Wavelet 2 also corrects in the time domain, while the
- Wavelaunch is largely correcting only in the frequency domain.
- Additionally, Wavelet 2 can also be used as a preampsaoradair (an ro-làimhamp can be bypassed), and includes its own microphone to automatically run room correction and adjust for the room. Wavelet 2 also features a high-end DAC, capable of up to 32 bit 384kHz audio, in addition to accommodating 4 other analog stereo sources and 4 digital inputs.
- Finally, Wavelet 2 is also easier to control, wirelessly from any iPad/iPhone/Android or computer.
- For full information, please see more here.
Sgrìobhainnean/Goireasan
 |
Pròiseasar Wavelaunch DSP Dìleab [pdfLeabhar-làimhe an t-Sealbhadair 2025, Pròiseasar DSP Wavelaunch, DSP, Pròiseasar Wavelaunch, Pròiseasar |