KOLINK Unity Arena ARGB Midi Tower Case
Produkt ynformaasje
Spesifikaasjes
- Produkt Namme: UNITY ARENA ARGB
- Control Method: Mainboard PWM Header, Mainboard 5V ARGB Header, DUAL FUNCTION BUTTON
- Stipe apparaten: oant 6 fans en ARGB-apparaten
- Power Connection: SATA Power Kabel
- RGB-stipe: 5V ARGB (5V/Data/-/GND)
Produkt Usage Ynstruksjes
Power Connection
Ferbine de SATA macht kabel oan jo PSU.
Fan ynstelle
- Connect up to 6 fans to the ARGB fan hub controller. 4 fans are pre-installed. Connect additional fans to free PWM headers.
- Connect the PWM signal cable to a free mainboard PWM fan header (e.g., CHA_FAN1) to control fan speed via the mainboard.
ARGB Ferbining
- Connect up to 6 ARGB devices to the ARGB fan hub controller. 4 devices are pre-installed. Connect additional ARGB devices to free headers.
- Connect the 5V ARGB MB sync. cable to the mainboard 5V ARGB header to control lighting via the mainboard.
ARGB kontrôle
Use the DUAL FUNCTION BUTTON to switch RGB effects and toggle between mainboard control and case-control.
Power Connection
Ferbine maksimaal 6 fans mei de ARGB fan hub controller. 4 fans binne foarôf ynstalleare. Ferbine ekstra fans oan 'e fergese PWM-headers. Ferbine de PWM sinjaal kabel nei in frije mainboard PWM fan header (bgl CHA_FAN1) foar in kontrôle fan de snelheid fia de mainboard. Ferbine de SATA macht kabel oan in frije SATA macht ferbining op jo PSU.
Noat: Brûk allinich de PWM-koppen fan 'e ARGB-fanhub-controller om fans te kontrolearjen. AIO-pompen fereaskje PWM-headers mei konstante 12V fan jo mainboard.
ARGB Ferbining
Connect up to 6 ARGB devices to the ARGB fan hub controller. 4 fans are pre-installed. Connect additional ARGB devices to the free headers. Connect the 5V ARGB MB sync.
cable to the mainboard 5V ARGB header to control the lighting via the mainboard.
Noat: De controller stipet allinich 5V ARGB (5V/Data/-/GND) apparaten. Kontrolearje asjebleaft de hânlieding fan jo mainboard foar stipe Anschlüsse.
ARGB kontrôle
KONTAKT
FAQs
- Q: What type of ARGB devices does the controller support?
- A: The controller only supports 5V ARGB (5V/Data/-/GND) devices. Please refer to your mainboard manual for supported connectors.
- Q: How do I control fan speed?
- A: Connect the PWM signal cable to a free mainboard PWM fan header to control the fan speed via the mainboard.
- Q: How do I switch between mainboard control and case-control for RGB effects?
- A: Press and hold the DUAL FUNCTION BUTTON for 3 seconds to switch between the mainboard control and case-control.
Dokuminten / Resources
 |
KOLINK Unity Arena ARGB Midi Tower Case [pdf] Ynstallaasjegids Unity Arena ARGB Midi Tower Case, Arena ARGB Midi Tower Case, ARGB Midi Tower Case, Midi Tower Case, Tower Case |
