di-soric IRSD-15-G3-B4 Inductive Ring Sensor
Specifications
- Internal Diameter: 15.1 mm
- Service Voltage: 10 – 30 V DC
- Switching Output: Gegentakt/PNP/NPN, 100 mA, NO/NC
- No-load Current (max.): 30 mA
- Speed of Parts (min.): 0.1 m/s
- Speed of Parts (max.): 35 m/s
- Protection Type: IP 67
- Ambient Temperature during Operation: Not specified
Product Usage Instructions
Installation:
- Ensure the power supply is within the specified range of 10 – 30 V DC.
- Connect the sensor according to the provided wiring instructions.
- Mount the sensor in a suitable location with the internal diameter aligned correctly.
- Ensure the sensor is protected from external elements as per its IP 67 rating.
Operation:
- Apply power within the specified voltage range to activate the sensor.
- Monitor the switching output for the desired response based on your application requirements.
- Adjust the sensor position or settings if needed to optimize performance.
Maintenance:
- Regularly inspect the sensor for any signs of damage or wear.
- Clean the sensor gently using a soft cloth if necessary to maintain proper functionality.
- Refer to the user manual for any specific maintenance procedures recommended by the manufacturer.
FAQ
- Q: Can this sensor be used outdoors?
- A: No, this sensor is rated for indoor use only.
- Q: What is the maximum speed of parts this sensor can detect?
- A: The sensor can detect parts moving at speeds up to 35 m/s.
Dimension
- Ring diameter
- BK: black
- BN: brown
- BU: blue
- WH: white
Technical data
| Technical data | +20°C, 24 V DC |
| Internal diameter | 15,1 mm / 15.1 mm / 15,1 mm |
| Service voltage | 10 … 30 V DC |
|
Switching output |
Gegentakt/PNP/NPN, 100 mA, NO/NC / Push-pull/ PNP/NPN, 100 mA, NO/NC / Push-pull/PNP/NPN, 100 mA, NO/NC |
| No-load current (max.) | 30 mA |
| Speed of parts (min.) | 0,1 m/s / 0.1 m/s / 0,1 m/s |
| Speed of parts (max.) | 35 m/s |
| Protection type | IP 67 |
| Ambient temperature during operation | -25 … +70 °C |
Safety instructions
General safety notice
WARNING! Not a safety component pursuant to 2006/42/EG and EN 61496-1/-2! May not be used for personal protection! Non-compliance can lead to death or serious injuries! Only use as directed!
Contact
- di-soric GmbH & Co. KG
- Steinbeisstraße 6
- DE-73660 Urbach
- Germany
- Tel: +49 (0) 7181/9879-0
- info@di-soric.com
- www.di-soric.com
As of 05/17/24, subject to change
Enclosure Type 4X (indoor use only), 12, 13 Supply Class 2 NFPA 79 Applications only. For adapters providing field wiring means refer to product information or customer support
Documents / Resources
 |
di-soric IRSD-15-G3-B4 Inductive Ring Sensor [pdf] Instruction Manual IRSD-15-G3-B4, 213668, IRSD-15-G3-B4 Inductive Ring Sensor, IRSD-15-G3-B4, Inductive Ring Sensor, Ring Sensor, Sensor |
