di-soric 213791 Inductive Ring Sensor
Specifications:
- Model: IRSD-25P-G3-B4
- Type: Inductive Ring Sensor
- Enclosure: Type 4X (indoor use only), 12, 13
- Service Voltage: 10-30 V DC
- Switching Output: Gegentakt/PNP/NPN, 100 mA, NO/NC
- Internal Diameter: 25.1 mm
- No-load Current: 30 mA (max.)
- Speed of Parts: 0.1 m/s (min.) – 35 m/s (max.)
- Protection Type: IP 67
Product Usage Instructions
Safety Instructions:
General Safety Notice: WARNING! Not a safety component pursuant to 2006/42/EG and EN 61496-1/-2! May not be used for personal protection! Non-compliance can lead to death or serious injuries! Only use as directed!
Installation:
- Ensure the sensor is mounted securely in the desired location.
- Connect the sensor to a power supply within the specified voltage range (10-30 V DC).
- Verify proper wiring of the switching output according to the provided information.
Operation:
Once installed, the sensor will detect objects passing through its detection range. The switching output will change state based on the presence or absence of objects.
Maintenance:
Regularly check the sensor for any signs of damage or contamination. Clean the sensor if necessary to ensure proper functioning.
FAQ
- Q: Can the sensor be used outdoors?
- A: No, the sensor is rated for indoor use only.
- Q: What is the maximum speed of parts that can be detected?
- A: The sensor can detect parts moving at speeds up to 35 m/s.
Ring diameter
- K: black
- BN: brown
- BU: blue
- WH: white
Technical data:+20°C, 24 V DC
- Internal diameter: 25,1 mm / 25.1 mm / 25,1 mm
- Service Voltage; 10 … 30 V DC
- Switching output: Gegentakt/PNP/NPN, 100 mA, NO/NC / Push-pul PNP/NPN, 100 mA, NO/NC / Push-pull/PNP/NPN 100 mA, NO/NC
- No-load current (max.): 30 mA
- Speed of parts (min.): 0,1 m/s / 0.1 m/s / 0,1 m/s
- Speed of parts (max.): 35 m/s
- Protection type: IP 67
- Ambient temperature during operation: -25 … +70 °C
Safety instructions
General safety notice
WARNING! Not a safety component pursuant to 2006/42/EG and EN 61496-1/-2! May not be used for personal protection! Non-compliance can lead to death or serious injuries! Only use as directed!
As of 05/17/24, subject to change
di-soric GmbH & Co. KG
- Steinbeisstraße 6 DE-73660 Urbach Germany
- Tel: +49 (0) 7181/9879-0
- info@di-soric.com
- www.di-soric.com
Documents / Resources
 |
di-soric 213791 Inductive Ring Sensor [pdf] Instruction Manual IRSD-25P-G3-B4, 213791, 213791 Inductive Ring Sensor, 213791, Inductive Ring Sensor, Ring Sensor, Sensor |
