di-soric IRSD-25-G3-B4 Inductive Ring Sensor
Specifications:
- Product Model: IRSD-25-G3-B4
- Enclosure Type: 4X (indoor use only), 12, 13
- Supply Class: 2 NFPA 79 Applications only
- Service Voltage: 10 – 30 V DC
- Switching Output: Gegentakt/PNP/NPN, 100 mA, NO/NC
- No-load Current: 30 mA
- Speed of Parts (min.): 0.1 m/s
- Speed of Parts (max.): 35 m/s
- Protection Type: IP 67
Product Usage Instructions
Installation:
- Ensure the product is suitable for indoor use only.
- Connect the sensor to a power source within the specified voltage range (10 – 30 V DC).
- Follow the wiring instructions provided in the product manual or seek customer support if adapters are needed.
- Position the sensor with the internal diameter aligned as required for your application.
Operation:
- Ensure the sensor is powered and functioning correctly.
- Monitor the switching output to detect changes in parts speed within the specified range.
- Observe the protection type (IP 67) to ensure proper operation in the intended environment.
Maintenance:
- Regularly check the sensor for any physical damage or wear.
- Clean the sensor as needed to maintain optimal performance.
Ring Diameter
- BK: black
- BN: brown
- BU: blue
- WH: white
Safety instructions
General safety notice
WARNING! Not a safety component pursuant to 2006/42/EG and EN 61496-1/-2! May not be used for personal protection! Non-compliance can lead to death or serious injuries! Only use as directed!
Technical data
- Technical data +20°C, 24 V DC
- Internal diameter 25,1 mm / 25.1 mm / 25,1 mm
- Service voltage 10 … 30 V DC
- Switching output Gegentakt/PNP/NPN, 100 mA, NO/NC / Push-pull/PNP/NPN, 100 mA, NO/NC / Push-pull/PNP/NPN,100 mA, NO/NC
- No-load current (max.) 30 mA
- Speed of parts (min.) 0,1 m/s / 0.1 m/s / 0,1 m/s
- Speed of parts (max.) 35 m/s
- Protection type IP 67
- Ambient temperature during operation -25 … +70 °C
As of 05/17/24, subject to change
Frequently Asked Questions (FAQ):
Q: Can this sensor be used outdoors?
A: No, this sensor is designed for indoor use only.
Q: What is the maximum speed of parts that this sensor can detect?
A: The sensor can detect parts moving at speeds up to 35 m/s.
Q: Is this sensor suitable for personal protection applications?
A: No, this sensor is not a safety component for personal protection purposes.
di-soric GmbH & Co. KG
Steinbeisstraße 6
DE-73660 Urbach
Germany
Tel: +49 (0) 7181/9879-0
info@di-soric.com ∙ www.di-soric.com
Documents / Resources
 |
di-soric IRSD-25-G3-B4 Inductive Ring Sensor [pdf] Owner's Manual 213670, IRSD-25-G3-B4 Inductive Ring Sensor, IRSD-25-G3-B4, Inductive Ring Sensor, Ring Sensor, Sensor |
