UBiBOT WS1 Wifi Temperature Sensor

Giya sa tiggamit
Pagpaila sa Produkto
Ang sensor, nga adunay lig-on nga pasundayag ug taas nga pagkasensitibo, usa ka hinungdanon nga himan alang sa pag-obserbar ug pagtuon sa panghitabo, ebolusyon ug pag-uswag sa mga saline nga yuta ug dinamika sa tubig-asin. Ang pagsukod sa dielectric nga makanunayon sa yuta naghatag usa ka direkta ug lig-on nga pagpamalandong sa tinuud nga sulud sa tubig sa lainlaing mga yuta, ingon usab usa ka pagsukod sa porsyento sa gidaghanon.tage sa kaumog sa yuta.
Gamita ang Mga Sitwasyon sa Kaso
The sensor is suitable for soil moisture monitoring, scientific experiments, water-saving irrigation, greenhouses, flowers and vegetables, meadows and pastures, rapid soil measurement, plant cultivation, wastewater treatment, fine agriculture and other occasions.
Mga bahin
- Soil water content, conductivity and temperature in one.
- Completely sealed, acid and alkali corrosion resistant, can be buried in the soil or directly into the water for long-term dynamic detection.
- High precision, fast response, good interchangeability, probe insertion design ensures accurate measurement and reliable performance.
Mga Detalye sa Produkto
| Mga detalye | |
| Modelo | UB-SEC-N1 |
| Suplay sa kuryente | DC 4.5 ~ 30V |
| Max Karon | 110mA(@5V) |
|
Sakup sa Pagsukod |
EC: 0~20000μS/cm Temperature: -40~80℃ Humidity: 0~100% |
|
Pagkatukma |
EC: ±3%FS (0~10000μS/cm), ±5%FS (10000~20000μS/cm)
Temperatura: ± 0.5 ℃ Humidity: ±2% (@0~50%, palm soil+30%+25℃) ; ±3% (@50~100%, palm soil+60%+25℃) |
|
Resolusyon |
EC: 1μS/cm Temperature: 0.1℃
Pagpaubos: 0.1% |
| Ang lebel sa proteksyon | IP68 |
| Konektor | Audio |
| Gitas-on sa Cable | 3m |
| Protokol sa Komunikasyon | RS485 Modbus RTU Protocol |
| RS485 nga adres | 0xD6 |
| Baud Rate | 1200 bit/s, 2400 bit/s, 4800 bit/s (default), 9600 bit/s, 19200 bit/s |
Instruksyon sa mga Wiring

Sukat sa Sukat
Measurement area: Inside a 5cm diameter cylinder of equal height to the probes, centred on the centre of the two probes.

Quick Test Method
Select a suitable measurement site, avoid rocks and ensure that the steel needle does not touch hard objects. Throw away the top layer of soil according to the required measuring depth, keep the original tightness of the soil underneath, and insert the sensor vertically into the soil by holding it tightly. Do not shake the sensor from side to side when inserting it. It is recommended to take several measurements within a small area of one measurement point to find the average value.
Ground Penetration Method
Vertically dig a pit with a diameter of >20cm. Insert the sensor pin horizontally into the pit wall at the established depth and fill the pit tightly. After a period of stabilisation, measurements and recordings can be made over a period of days, months or even longer.

Mga protocol sa komunikasyon
- Mga sukaranan sa komunikasyon
Panguna nga Parameter sa Komunikasyon Sistema sa Coding 8-bit binary Data Bit 8 bitay Parity Checking Bit wala Hunong Bit 1 gamay Pagsusi sa Sayop Pagsusi sa CRC Baud Rate 1200 bit/s, 2400 bit/s, 4800 bit/s (default), 9600 bit/s, 19200 bit/s - Format sa Data Frame
Ang Modbus-RTU communication protocol gigamit sa mosunod nga format:- Inisyal nga istruktura ≥ 4 bytes sa panahon.
- Address code: 1 byte, default 0xE1.
- Function code: 1 byte, support function code 0x03 (basaha lang) ug 0x06 (basaha/isulat).
- Data area: N bytes, 16-bit data, taas nga byte ang nag-una.
- Pagsusi sa sayop: 16-bit CRC code.
- Katapusan nga istruktura ≥ 4 bytes sa oras.
Pangayo Address sa ulipon Function Code Rehistro nga Address Numero sa mga Rehistro CRC LSB CRC MSB 1 byte 1 byte 2 byte 2 byte 1 byte 1 byte tubag Address sa ulipon Function Code Gidaghanon sa Bytes Kontento 1 Kontento 1 … Sulod n CRC 1 byte 1 byte 1 byte 2 byte 2 byte … 2 byte 2 byte
- Rehistro nga Address
Rehistro nga Address Address Kontento Gidugayon sa Pagparehistro Function Code Deskripsyon sa mga kahulugan 0x0000 Humidity 1 03 Unsigned integer data, gibahin sa 10 0x0001 Temperatura 1 03 Signed integer data, divided by 10 0x0002 EC 1 03 Integer 0x07D0 Address 1 03/06 1~255 0x07D1 Baud Rate 1 03/06 0:2400, 1:4800, 2:9600
NOTA
- The probe must be fully inserted into the soil when measuring.
- Pay attention to the lightning protection when using in the field.
- Do not violently bend the probe, do not pull the sensor lead wire, do not drop or hit the sensor violently.
Kanunay nga Gipangutana nga mga Pangutana
P: Unsa ka giladmon ang sensor nga isulod sa yuta para sa saktong pagsukod?
A: The sensor should be fully inserted into the soil for accurate measurements.
P: Mahimo bang gamiton ang sensor sa mga palibot sa gawas?
A: Yes, the sensor can be used in outdoor environments. However, it is important to pay attention to lightning protection when using it in the field.
Q: Unsa ang protocol sa komunikasyon nga gigamit sa sensor?
A: Ang sensor naggamit sa RS485 Modbus RTU Protocol alang sa komunikasyon.
Mga Dokumento / Mga Kapanguhaan
![]() |
UBiBOT WS1 Wifi Temperature Sensor [pdf] Giya sa Gumagamit WS1, WS1 Pro, UB-SEC-N1, WS1 Wifi Temperature Sensor, WS1, Wifi Temperature Sensor, Temperature Sensor, Sensor |

