A leading global manufacturer of dental medical equipment, specializing in high-tech ultrasonic scalers, light curing units, and endodontic instruments.
Guilin Woodpecker Medical Instrument Co., Ltd., commonly known as Woodpecker, is a professional manufacturer dedicated to the research, development, and production of dental medical devices. Headquartered in Guilin, China, the company is a prominent name in the global dental industry, known for its high-quality ultrasonic piezo scalers, LED curing lights, apex locators, and root canal treatment equipment.
Woodpecker places a strong emphasis on quality control and innovation, holding numerous patents for its industrial designs and structural technologies. Their products, such as the UDS and DTE series scalers and i-Sensor imaging devices, are widely used by dental professionals for effective calculus elimination, periodontal treatment, and restorative procedures. The company ensures its equipment meets rigorous sterilization standards, featuring autoclavable handpieces and durable components designed for clinical reliability.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
The detachable handpieces on many Woodpecker scalers (such as the UDS or DTE series) can be autoclaved under high temperature (135°C) and high pressure (0.22MPa). Ensure you unscrew the scaling tip and endochuck before sterilization. Do not boil in liquid or use chemical disinfectants like iodine or glutaraldehyde.
If the curing light indicates low power or does not charge, check the adapter connection and the charging points for impurities. If the battery life has significantly decreased, the rechargeable Lithium battery may need to be replaced. Ensure you use the original power adapter to avoid damaging the circuit.
If the tip vibrates but no water flows: 1) Ensure the water control knob is turned on. 2) Check if the water source is connected and has sufficient pressure. 3) The water pipe or solenoid valve may be blocked with impurities; cleaning with a multi-function syringe may be required.
Yes, the optical fiber of Woodpecker curing lights is typically reusable and designed to be sterilized for 4 minutes at 134°C (or similar protocols like 135°C/0.22MPa for 20 minutes depending on the model) before each use to prevent cross-contamination.
If the tip is loose, vibration will be weak or non-existent. Use the provided torque wrench to screw the tip tightly onto the handpiece. If the tip is damaged or worn, it should be replaced with a new one.