Woodpecker DTE Dental Ultrasonic Scaler V2/V3-LED HD-7L Scaler Handpiece

Contents

Woodpecker DTE Dental Ultrasonic Scaler V2/V3-LED HD-7L Scaler Handpiece User Manual

Model: DTE Dental Ultrasonic Scaler V2/V3-LED HD-7L Scaler Handpiece

Brand: Woodpecker

1. Important Safety Information & Disclaimer

This device is intended for use by qualified health care professionals only. Please ensure you are authorized to purchase and use such equipment in your country.

Always follow standard dental safety protocols, including proper sterilization and personal protective equipment (PPE) usage.

2. Product Overview

The Woodpecker DTE Dental Ultrasonic Scaler V2/V3-LED HD-7L Handpiece is a high-quality, built-in ultrasonic scaler component designed for dental units. It features a detachable handpiece with LED light for enhanced visibility during procedures. This product is 100% original Woodpecker DTE brand, holding FDA and CE0197 certifications.

It is compatible with NSK, ACTEON, and SATELEC systems, as well as various Woodpecker DTE series scalers (DTE-V2 LED, DTE-V3 LED, DTE-D5 LED, DTE-D7 LED, etc.).

Key Features:

  • Built-in ultrasonic scaler for dental units.
  • Detachable HD-7L handpiece with integrated LED light.
  • Functions: Scaling, Perio. DTE V3 LED model also includes Endo function.
  • Microcomputer control for automatic frequency tracking and constant power output.
  • Compatible with Satelec Acteon Ultrasonic scalers.
  • Handpiece is autoclavable at 135℃ and 0.22Mpa.
  • Handpiece shell made from special imported American plastic for durability.
DTE-V2 LED and DTE-V3 LED Scaler KITs overview
Figure 1: Overview of DTE-V2 LED and DTE-V3 LED Scaler Kits, showing handpieces and included tips.

3. Setup and Installation

This product is designed for integration into existing dental units. Installation should be performed by a qualified dental technician or professional.

3.1 Components Overview

  • HD-7L Handpiece: The main operating instrument with LED light.
  • Control Board: (V2 LED Control Board or V3 LED Control Board) The electronic module for scaler function.
  • Connection Wires: For connecting the control board to the handpiece and dental unit.
  • Cable Tube-7L: The cable housing for the handpiece.
  • TD-1L: A component for the handpiece.
  • Scaler Tips: Specific tips for scaling, perio, and endo (V3 LED only) functions.
DTE-V2 LED Scaler KIT components
Figure 2: Components of the DTE-V2 LED Scaler Kit.
DTE-V3 LED Scaler KIT components
Figure 3: Components of the DTE-V3 LED Scaler Kit.

3.2 Handpiece and Control Board Installation

  1. Ensure the dental unit's power is off before beginning installation.
  2. Connect the appropriate control board (V2 LED or V3 LED) to the dental unit's internal wiring according to the unit's specific instructions. Refer to the labels on the control board for input/output connections.
  3. Connect the handpiece connection wire to the control board.
  4. Securely attach the HD-7L handpiece to the cable tube.
  5. Ensure all connections are firm and correctly seated.
DTE-V2 LED Control Board
Figure 4: DTE-V2 LED Control Board.
DTE-V3 LED Control Board
Figure 5: DTE-V3 LED Control Board.
V2-LED Connection Wire
Figure 6: V2-LED Connection Wire.
V3-LED Connection Wire
Figure 7: V3-LED Connection Wire.
Cable Tube-7L
Figure 8: Cable Tube-7L, compatible with DTE and Satelec with light.

3.3 Tip Installation

  1. Select the appropriate scaler tip for the procedure (scaling, perio, or endo for V3 LED).
  2. Gently screw the tip onto the handpiece until it is finger-tight. Do not overtighten.
  3. Ensure the tip is securely seated to prevent water leakage or tip detachment during operation.
HD-7L LED Handpiece with tip
Figure 9: DTE HD-7L LED Handpiece, showing tip attachment area.

4. Operating Instructions

Once installed, the scaler operates via the dental unit's controls. The microcomputer control system ensures automatic frequency tracking and constant power output for comfortable scaling.

4.1 Functions

  • Scaling: For removing calculus and plaque from tooth surfaces.
  • Perio: For periodontal treatments, including subgingival scaling.
  • Endo (V3 LED only): The DTE V3 LED model supports endodontic procedures. The DTE V2 LED model does NOT have this function.
  • DTE V2 LED Kit Tips: GD1*2, GD2*1, GD4*1, PD1*1
  • DTE V3 LED Kit Tips: GD1T*2, GD2T*1, GD4T*1, PD1T*1, ED1T*1

4.3 Power and Water Adjustment

Adjust the power and water flow settings directly on your dental unit. Start with lower power settings and gradually increase as needed for the procedure. Ensure adequate water flow for cooling the tip and flushing debris.

5. Maintenance and Sterilization

Proper maintenance and sterilization are crucial for the longevity of the device and patient safety.

5.1 Handpiece Care

  • The HD-7L handpiece is detachable for easy cleaning and sterilization.
  • After each use, remove the handpiece from the cable tube.
  • Clean the exterior of the handpiece with a suitable disinfectant wipe.
  • Ensure no debris is lodged in the tip connection area.

5.2 Sterilization

The HD-7L handpiece is autoclavable. Sterilize it in an autoclave at 135℃ (275℉) and 0.22Mpa (32 psi) pressure. Follow your facility's standard sterilization cycles and protocols.

TD-1L component with autoclavable symbol
Figure 10: TD-1L component, indicating autoclavable properties (134℃).

5.3 Tip Care

  • Remove tips from the handpiece before cleaning and sterilization.
  • Clean tips thoroughly to remove all debris.
  • Sterilize tips according to manufacturer guidelines and your facility's protocols.

6. Troubleshooting

If you encounter issues with your DTE Ultrasonic Scaler Handpiece, consider the following common troubleshooting steps:

  • No Power/No Vibration:
    • Check if the dental unit's power is on.
    • Verify all connections between the handpiece, control board, and dental unit are secure.
    • Ensure the control board is receiving power (Main unit input 24V~ 50Hz).
  • Weak Scaling/Ineffective Operation:
    • Check the power setting on the dental unit; increase if necessary.
    • Ensure the scaler tip is correctly and securely attached.
    • Inspect the tip for wear or damage; replace if worn.
    • Verify adequate water pressure (0.1bar ~ 5bar) and flow.
  • Water Leakage:
    • Ensure the scaler tip is tightly screwed onto the handpiece.
    • Check the O-rings on the handpiece for damage or improper seating; replace if necessary.
  • LED Light Not Working:
    • Check the handpiece connection.
    • If the issue persists, the LED component may require professional inspection or replacement.

For persistent issues, contact a qualified dental equipment technician or your supplier for assistance.

7. Specifications

Feature Specification
Main Unit Input 24V~ 50Hz
Output Power 3W ~ 20W
Frequency 28kHz ± 3kHz
Water Pressure 0.1bar ~ 5bar (0.01MPa ~ 0.5MPa)
Handpiece Model HD-7L (Detachable, with LED)
Sterilization Autoclavable at 135℃ and 0.22Mpa
Material Metal (internal components), Special Imported Plastic (handpiece shell)
Certifications FDA, CE0197
Functions Scaling, Perio (V3 LED also has Endo)

8. User Tips

  • Regular Inspection: Periodically check the handpiece and tips for any signs of wear, cracks, or damage. Replace components as needed to maintain optimal performance and safety.
  • Water Quality: Use distilled or deionized water in your dental unit's water system to prevent mineral buildup and ensure the longevity of the scaler's internal components.
  • Tip Selection: Always select the correct tip for the specific procedure to achieve the best results and prevent unnecessary wear on the tip or damage to tooth surfaces.
  • Gentle Handling: Although the handpiece shell is durable, avoid dropping or subjecting the unit to excessive force to prevent internal damage.

9. Warranty and Support

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your original purchase or contact your authorized Woodpecker DTE distributor or the seller directly.

Always ensure that any repairs or servicing are performed by qualified technicians using genuine replacement parts to maintain product integrity and warranty validity.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.