Manufacturer of professional wireless HDMI video transmission systems, offering low-latency extenders and KVM solutions for home, office, and live streaming.
VRRIIS is a technology brand established in 1998, dedicated to providing high-quality wireless audio-video transmission solutions. The company specializes in developing advanced wireless HDMI transmitters and receivers, video extenders, and KVM switches.
Their products are designed to eliminate cable clutter in various environments, including home entertainment setups, office conference rooms, educational institutions, and professional film shoots. VRRIIS devices typically feature dual-band Wi-Fi transmission, support for 1080P and 4K resolutions, and ultra-low latency performance suitable for real-time monitoring and live broadcasting.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To pair a new RX, power up both units using the 5V2A adapters. Connect the new RX's 'HD OUT' to the TX's 'HD IN' using an HDMI cable. Wait approximately 30 seconds; looking for the TX LED to flash green, indicating successful pairing.
Check that the transmitter is effectively powered on. Verify that the distance is within the device's limit (e.g., 200m) and there are no excessive wall obstructions. Try relocating the devices to reduce interference.
Ensure the IR sender head faces the signal source receiver clearly. Check that the infrared frequency is within the supported range of 20KHz–60KHz.
Yes, many VRRIIS models support a 'one-to-many' configuration, allowing a single transmitter to send signals to up to 4 receivers simultaneously.