Sam's Backup Lights makes automatic reverse light and backup beeper kits for off-road vehicles, with model-specific wiring and controllers for easier installation.
Sam's Backup Lights supplies automatic reverse light and backup beeper kits for off-road vehicles, including model-specific kits for Polaris and Can-Am vehicles.
Browse installation guides for wiring, controller connections, mounting and operation. Match your kit number and vehicle compatibility, and read the complete manual before starting installation.
For product assistance, email support@samsbackuplights.com.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Match the kit number, such as POL-3-01 or POL-5-05, and the compatible vehicle model to the guide. Installation steps and components vary between kits.
The documented Polaris General and Xpedition reverse light kits operate automatically when shifted into reverse and require no programming. Check your specific kit manual for operating details.
For the documented Polaris reverse light kits with this feature, shift into Neutral and hold the brake pedal for up to two seconds to turn the lights on. Repeat the procedure to turn them off.
Check that connections are secure and correctly installed, and verify that the fuse is intact. If the problem persists, email support@samsbackuplights.com with your kit number.
The guides note that equipment may remain on until the vehicle ECU enters sleep mode if reverse or a supported override is active. This can take approximately 30 seconds to two minutes, depending on the vehicle and ECU.