Sabbat E12 Manual

Sabbat E12

Bluetooth usage:

  1. Making phone calls: Be sure the earbuds are connected with your mobile phone. Once connected you can make phone calls. When making calls there is only one earbud working. For Incoming calls, it will tell you calling numbers that are being received. To answer the call, slightly press the power button one time. To reject calls, long press the power button two seconds, When the earbuds are in music mode, you can dial the lost number by a quick press to the Power button twice.
  2. Listening to music: Be sure the earbuds am connected with your mobile phone. You can listen to music on your music list. Shortly press the Power button to stop the music, to replay press again.
  3. Power off: Long press the Power button until the LED red is no long red, the Bluetooth device is then turned off. The earbuds turn off automatically when earbud is away from Bluetooth device for a duration of over 5 minutes.
  4. Charging: When battery is low, there will be a sound and a flashing red light to indicate low battery. While charging the LED light is red, when finished charging the light turns to a blue LED light when fully charged.

NOTE: The earbuds will be forced to shut down while charging, even if the Power was left on prior to charging.

Attention:

  1. Handle with care. Do not throw, sit on, or store the SoundPods under heavy objects. Keep away from high temperatures and environments with high humidity. Store in an environment with a temperature between -10.0 – 60.C.
  2. Keep away from high frequency transmitting equipment such as WIFI routers which may cause sound interference or disconnection.
  3. Please keep the earbuds within a 10m (33 ft) range of the connected device.
  4. This product is a compatible with both iOS and Android^4 devices.

Bluetooth® pairing:

  1. Pairing with one earbud:
    Long press the multi-function button until the LED flashes red and blue alternately, then turn on the Bluetooth on your device, select “SOUND-PODS” on your list. There will be a reminding voice saying ‘connected”, then you can enjoy music or make phone calls. These earbuds also take incoming phone calls.
  2. Pairing with both sides:
    a. Long press the multi-function buttons on both sides at the same time until the LED flashes red and blue alternately.
    b. Then double click either side to enter pairing mode, there will be a reminding voice saying ‘ready to pair.
    c. Turn on Bluetooth on your device and choose ‘SOUND-PODS” on your list to connect. When the LED flashes blue slowly, they are paired successfully. Battery status displays on your mobile device.

NOTE: There will be only one earbud working when making/an-swering phone calls, but both sides can control power, off/play/pause function individual-ly when connected. Both earbuds will be synchronized. memory function supports connecting devices automatically.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

Questions about your Sabbat E12 Manual ? Post in the comments!
Learn More About Sabbat E12

Sabbat X12 Pro Manual

Sabbat X12 Pro
Sabbat X12 Pro

Sabbat X12 Pro Bluetooth Headset User Manual

Instructions

Sabbat

Manufacture:Shenzhen Sabbat Technology Development Co.,Ltd.

Product Schematic Diagram

Product Schematic Diagram
Product Schematic Diagram

Package list

• Bluetooth headset ( 2PCS ) Power Storage Room

• USS charging line

• Instruction

• Exquisite packaging

• Product qualification certificate

Wearing a Sketch

Wearing a Sketch
Wearing a Sketch

Product specification

• Name: Sabbat Music wireless Bluetooth headset

• Bluetooth name: Sabbat X12

• Version:4.1+EDR

• Input:DC 5V

• Battery Capacity:3.7V/60mAh

• Talking Time:About 2-3 Hours

• Charging Time):About 60 Min.

• Rechargeable warehouse: 3.7V/ 750mAh

• Profile Support:HSP/HFP/A2DP/AVRCP

• Sensitvity:120 ± 5dB

• Frequency Response:20-20000Hz

• Impedance:32 0

Products use Bluetooth pairing

1. Press and hold the power button on the earphones for 5-10 seconds until red and blue lights flash at the same.

2. Double—click any headset (host) power button, red and blue lights alternately flash, waiting for the left and right headphones automatically pair.

3. The earphones connect successfully with your phone when only blue lights showing on the earphones. Bluetooth link Turn on the phones Bluetooth search scan to ” SABBAT X12 ” and click connect

* The earphones will automatically connect with same phone the next time you turn on Bluetooth on the phone.

* If you want to connect the earphones with another phone, please follow up the above steps.

Setting
Setting

1. Listen to the music

* When headphones boot and and mobile phone connection, can use mobile phones to listen to music.

* Press the open key in the process of music, music on hold. Press will continue to play the music again.

* Music played in the process, double click to open the key, will play the neat song music.

2. Call

* When the headphones on and connected to the phone, can answer the call. Pick up the phone and only one headset work.

* When calls, voice telephone number.Click having calls prompt headphones for the key, can answer the phone, if long according to decline a call.

*Phone in the process, press the open key, will hang up the phone, to go back to the previous state.

*Phone in the process, the volume can be adjusted through the phone.

3. OFF

* Long press the headset key 5 seconds, the LED display normally on a red light, then turn it off.

* When about headphones snatching use, only need to du to win it off with one of the headphones, another headset will automatically shut down.

Sabbat X12 wireless earphones charging instructions :

1. Firstly charge the charging cabin: connect the cabin with the power adapter through the charging cable that enclosed with the earphones. When the cabin is fully charged LED lights will stay red.

2. Secondly charge the earphones through cabin: put the earphones inside the cabin correctly, when the earphones are under charging both LED lights on the cabin and earphones will flash red. When the earphones are fully charged, LED lights on the earphones will tum blue and stay for 5 seconds and LED lights on the cabin will turn of 10 seconds later.

Matter Needing Attentions

1. The headset should be stored M a dry and ventilated environment, to avoid oil, water, steam, moisture and dust, such as contact, lest affect product performance.

2. Avoid using stimulus, organic solvents or items containing these ingredients, dean the headphones.

3. The use of headphones should be correctly according to the requirement specification, pay attention to use the influence of environment on the headphones. In order to ensure the smooth connection, it is recommended that the distance between the phone and headset within 10 meters.

4. Connect the headphones have not or poor communications, and other problems, please do not remove the headset secretly ontology and its accessories, otherwise no warranty. 5. Recharge headphones, please choose the standard USB charging line or the company specified in conformity with the requirements of charging cable.

6. To ensure that your normal use headphones, please make sure that the headset battery is enough.

Warranty description

Thank you for purchasing am brand products in order to ensure that the legitimate rights and interests of you, please be informed that to read the following items: • This card warranty certificate for the product, the product need for maintenance, please be sure to provide this card together with the products our company after-sales. • When this card is only effective use for warranty within the scope of the products, see below:

1. Through legal, formal channels for the company’s products;

2. The non-artificial damage products, including but not limited to remove secretly, improper use, natural disasters and other circumstances not within the scope of the warranty;

3. Does not exceed the product warranty;

• Low considerations include and not limited to above.

• When the company reserves the final interpretation.

Warranty Card
Warranty Card

FCC Caution.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Questions about your Sabbat X12 Pro Manual ? Post in the comments!