Sabbat E12 Ultra Marble TWS Wireless Earphones User Manual

Introduction

Welcome to the Sabbat E12 Ultra Marble TWS Wireless Earphones user manual. These earphones are designed to provide a high-quality audio experience with advanced features such as Bluetooth 5.2 connectivity, active noise cancellation, and a waterproof design. This manual will guide you through the setup, operation, and maintenance of your new earphones.

What's in the Box

1 pair of Sabbat E12 Ultra Bluetooth Earphones
1 Charging Compartment (Charging Case)
1 USB Type-C Charging Cable
1 User Manual
1 Set of Silicone Ear Caps (various sizes)
1 Waterproof Cloth Bag
1 Packaging Box

Technical Specifications

Feature	Specification
Brand	Sabbat
Model	E12 Ultra
Series	Marble Series
Type	In-Ear
Wireless	Yes
Bluetooth Version	Qualcomm 5.2
Bluetooth Solution	QCC3020
Water-resistant	IPX5
Speaker Unit	10mm/0.4"
Transmission Distance	10m
Operation	Tap Control
Charging Interface	Type-C
Playing Time (Single Charge)	6-8 hours
Total Playtime (with Charging Case)	30-32 hours (up to 4 full charges from case)
Charging Time	1 hour (earphones)
Earphone Battery Capacity	60mAh
Charging Box Battery Capacity	750mAh
Noise Cancellation	Yes (Active Noise-Cancellation, CVC8.1 Call Noise Reduction)
Frequency Response	20-20000Hz
Sensitivity	120±5dB
Impedance	32 Ohm
Audio Format Support	aptX/AAC/SBC
Wireless Frequency	2402-2482MHz
Microphone	Yes
Vocalism Principle	Dynamic

Features at a glance for Sabbat E12 Ultra earphones — Figure 1: Key features of the Sabbat E12 Ultra earphones including Qualcomm chip, Bluetooth V5.2, CVC8.1 noise reduction, 10mm moving coil, and compatibility.

Setup and First Use

1. Charging the Earphones and Case

Before first use, ensure both the earphones and the charging case are fully charged. Connect the provided USB Type-C cable to the charging case and a power source. The earphones will charge automatically when placed inside the case.

Charging Time: Approximately 1 hour for earphones.
Full Battery Life: Up to 30 hours (listening to songs, games, calls) with the charging case.
Fast Charge: 40 minutes of charging provides 8 hours of music playback.

Charging the Sabbat E12 Ultra earphones and case — Figure 2: Illustration of the charging case and earphones, highlighting powerful energy storage and endurance with 30 hours total battery life.

2. Pairing with Your Device

The Sabbat E12 Ultra earphones feature automatic pairing for convenience.

Open the charging case. The earphones will automatically power on and enter pairing mode.
On your device (smartphone, tablet, laptop), go to Bluetooth settings.
Search for "Sabbat E12 Ultra" in the list of available devices and select it to connect.
Once connected, you will hear a confirmation tone, and the earphones will be ready for use.

The earphones support master-slave switching, allowing you to use either earbud independently (monaural mode) or both together for stereo sound (binaural mode).

Sabbat E12 Ultra earphones showing monaural and binaural modes — Figure 3: Diagram illustrating the seamless switching between monaural (single earbud) and binaural (both earbuds) modes.

Sabbat E12 Ultra compatibility with various devices — Figure 4: The Sabbat E12 Ultra earphones are compatible with iOS and Android devices, including iPhones, laptops, tablets, Android phones, and smartwatches.

Operating Instructions

The Sabbat E12 Ultra earphones feature intuitive tap controls for various functions.

Sabbat E12 Ultra one-key operation tap controls — Figure 5: Visual guide to the one-key tap operations for the Sabbat E12 Ultra earphones.

Action	Control
Play/Pause	Press either earbud once
Next Song	Press the right earbud twice
Previous Song	Press the left earbud twice
Volume Up	Press the right earbud three times
Volume Down	Press the left earbud three times
Answer/End Call	Press either earbud once
Activate Voice Assistant (Siri)	Long press either earbud for 2 seconds

Noise Cancellation (CVC8.1)

The earphones feature CVC8.1 call noise reduction technology, which uses dual noise reduction and a four-microphone system to accurately eliminate environmental noise and dynamic sound quality equalization. This ensures clear, high-definition calls by effectively filtering background noise.

Sabbat E12 Ultra CVC8.1 Call Noise Reduction feature — Figure 6: Explanation of CVC8.1 Call Noise Reduction for intelligent noise reduction and HD calls.

Maintenance and Care

Cleaning: Regularly clean the earphones and charging case with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
Ear Caps: The earphones come with various sizes of silicone ear caps. Choose the size that provides the most comfortable and secure fit for your ears. A good seal improves sound quality and noise isolation.
Water Resistance: The earphones are IPX5 water-resistant, meaning they can withstand splashes and sweat. Do not submerge them in water or expose them to heavy rain. Ensure they are dry before placing them back in the charging case.
Storage: When not in use, store the earphones in their charging case to protect them and keep them charged.

Sabbat E12 Ultra ergonomic design for comfortable wear — Figure 7: The ergonomic design ensures a comfortable fit for extended listening sessions.

Troubleshooting

Earphones not pairing or connecting:

Ensure both earphones are charged.
Place earphones back in the charging case, close the lid, then open it again to reset pairing mode.
Turn off and on Bluetooth on your device.
Forget "Sabbat E12 Ultra" from your device's Bluetooth list and try pairing again.
Ensure your device is within the 10m transmission distance.

Only one earphone working:

Ensure both earphones are charged.
Place both earphones back in the charging case, close the lid, then open it again. They should automatically reconnect in binaural mode.
If the issue persists, try resetting the earphones (refer to the full user manual if a specific reset procedure is available, otherwise, the above steps usually suffice).

Poor sound quality or disconnections:

Ensure earphones are fully charged.
Check for obstructions between the earphones and your device.
Move closer to your device to ensure you are within the 10m Bluetooth range.
Ensure there is no interference from other wireless devices.
Clean the earphone grilles and ear caps to remove any debris that might affect sound.

User Tips

Comfortable Fit: Experiment with the different sizes of silicone ear caps provided to find the best fit for your ears. A good seal improves sound quality and noise isolation.
Battery Management: For optimal battery longevity, avoid fully draining the earphones and charging case frequently. Charge them regularly.
Connectivity: If you experience connectivity issues, try resetting your device's Bluetooth or re-pairing the earphones.

Warranty and Support

Sabbat E12 Ultra earphones come with a standard manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions. For technical support or service inquiries, please contact the retailer or manufacturer's customer service department.

Quality assurance is provided, and sellers bear responsibility for goods with quality problems, including refunds. Buyers can provide feedback and evaluation to help improve services.