Sabbat X12 Bluetooth Headphones User Manual

Sabbat
Sabbat X12 Bluetooth Headphones

Instructions
Sabbat

Manufacture: Shenzhen Sabbat
Technology Development Co. LTD

Product Schematic Diagram

Product Schematic Diagram
Product Schematic Diagram

Package list
• Bluesooth headset ( 2PCS )
• Power storage room
• USB charging line
• Instruction
• Exquisite packaging
• Product qualification certificate

Wearing a Sketch

Wearing  a  Sketch

Product specification
• Name: Sabbat Music wireless Bluetooth headset
• Bluetooth name: Sabbat X12
• Version: 4.1+EDR
• Input: DC 5V
• Battery Capacity: 3.7V/60mAh
• Talking Time: About 2-3 Hours
• Charging Time): About 60 Min
• Rechargeable warehouse: 3.7V / 750mAh
• Profile Support: 115P/HFP/A2DP/AVACP
• Sensitivity: 120 ± 5dB
• Frequency Response: 20-20000Hz
• Impedance: 320

Products use
Bluetooth pairing

1. Press and hold the power button on the earphones for 5-10 seconds until red and blue lights flash at she same.
2. Double—click any headset (host) power button, red and blue lights alternately flash, waiting for the left and right headphones automatically pair.
3. The earphones connect successfully with your phone when only blue lights showing on the earphones.

Sabbat X12 wirless earphones charging instructions :
1. Firstly charge the charging cabin: connect the cabin with the power adapter through the charging cable that enclosed with the earphones. When the cabin is fully charged LED lights will stay red.
2. Secondly charge the earphones through cabin: put the earphones inside the cabin correctly, when the earphones are under charging both LED lights on the cabin and earphones will flash red. When the earphones are fully charged, LED lights on the earphones will tum blue and stay for 5 seconds and LED lights on the cabin will turn off 10 seconds later.

Bluetooth link Turn on the phones Bluetooth search scan to ” Sabbat X12 ” and click connect

  • The earphones will automatically connect with same phone the next time you turn on Bluetooth on the phone.
  • If you want to connect the earphones with another phone, please follow up the above steps.
Bluetooth Setting

1. Listen to the music
* When headphones boot and and mobile phone connection, can use mobile phones to listen to music.
* Press the open key in the process of music, music on hold. Press will continue to play the music again.
* Music played in the process, double click to open the key, will play the neat song music.

2. Call
* When the headphones on and connected to the phone, can answer the call. Pick up the phone and only one headset week.
* When calls, voice telephone number. click having calls prompt headphones for the key, can answer the phone, if long according to decline a cal
* Phone in the process, press the open key, will hang up the phone, to go back to the previous state.
*Phone in the process, the volume can be adjusted through the phone call.

3. OFF
* Long press the headset key 5 seconds, the LED display normally on a red light, then turn it off.
* When about headphones matching use, only need to due to nun it off with one of the headphones, another headset will automatically shut down.

Matters needing attention
1. The headset should be stored in a dry and ventilated environment, to avoid oil, water, steam, moisture and dust, such as contact, lest affect product performance.
2. Avoid using stimulus, organic solvents or items containing these ingredients, dean the headphones.
3. The use of headphones should be correctly according to the requirement specification, pay attention to use the influence of environment on the headphones. In order to ensure the smooth connection it is recommended that the distance between the phone and headset within 10 meters.
4. Connect the headphones have not or poor communications, and other problems, please do not remove the headset secretly ontology and its accessories, otherwise no warranty.
5. Recharge headphones, please choose the standard USB charging lite or the company specified in conformity with the requirements of charging cable.
6. To ensure that your normal use headphones, please make sure that the headset battery is enough.

Product Warranty Card

Warranty Description

Thank you for purchasing “Sabbat” brand products in order to ensure that the legitimate lights and interests of you, please be informed that to mad the following items:
• This card warranty certificate foe the product, the product need for maintenance, please be sure to provide this ..rd. together with the products our company after-sales.
• When this card is only effective use for warranty within the scope of the products, see below:
1. Through legal, formal channels for the company’s products,
2. The non-artificial damage products, including but not limited to remove secretly, improper use, manual disasters and other circumstances not within the scope of the warranty:
3. Does not exceed the product warranty:-
• Low considerations include and not limited to above.
• When the company reserves the final interpretation.

Questions about your Sabbat X12 Bluetooth Headphones User Manual? Post in the comments!

…….

Leave a comment

Your email address will not be published. Required fields are marked *