Newhouse Hardware specializes in reliable residential doorbell chimes, push buttons, and related door hardware for easy home security and notification solutions.
Newhouse Hardware is a trusted provider of residential door hardware, specializing in a wide range of wired and wireless doorbell chimes, push buttons, and related accessories. Designed to blend classic aesthetics with modern functionality, their product line includes everything from standard mechanical chimes featuring traditional 'ding-dong' tones to customizable, battery-operated wireless units.
Built for straightforward installation and dependable performance, Newhouse Hardware products ensure homeowners have reliable solutions for their front and rear entrance notifications. Their offerings emphasize user-friendly setups, clear technical guidance, and broad compatibility with standard home electrical systems and transformers, making them a consistent choice for home upgrades and new installations.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
A mechanical chime will buzz if it is continuously energized. This can be caused by a stuck doorbell button, a shorted wire, or a transformer issue. Try removing the push button and briefly touching the wires together to test if the button is stuck.
Yes, they can work with smart video doorbells like the Ring Pro. However, you may need to upgrade to a more powerful transformer (e.g., 16V/30VA) to ensure sufficient power goes to both devices.
If your front door button only plays a single tone instead of the standard two-note "ding-dong", the wires are likely reversed. Switch the wires connected to the 'Front' and 'Trans' (Transformer) terminals on the chime.
Press and hold the volume control button on the receiver for about 4 seconds until you hear a 'ding-ding' sound. Select your preferred chime tone, press the transmitter push button, and then press the receiver's volume control button again to exit pairing mode.