Mill is a Norwegian brand designing smart heating and indoor air quality products with a focus on Scandinavian style and energy efficiency.
Mill International AS creates advanced heating and indoor climate solutions tailored for the modern home. Known for its elegant Scandinavian design, the brand offers a range of innovative products including Wi-Fi integrated panel heaters, oil-filled radiators, heat pumps, air purifiers, and smart air quality monitors. Mill products are designed to withstand harsh climates while providing safe, efficient, and comfortable indoor environments.
Headquartered in Norway, Mill emphasizes the combination of aesthetics and functionality. Their smart home ecosystem allows users to control heating and monitor air quality remotely via the Mill app, ensuring energy savings and optimal comfort. Whether for heating a single room or managing the climate of an entire home, Mill provides reliable, stylish, and user-friendly technology.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Turn off the heater's main switch. Turn it back on, and within 5 seconds press and hold the settings button (often marked with a gear icon). After about 20 seconds, the display should show 'Fr', at which point you release the button to complete the reset.
The Open Window function automatically stops heating if the heater registers a sudden temperature drop of more than 5 degrees Celsius in 15 minutes. The display will show 'FO', and the heater will maintain a low temperature (5°C) to prevent frost damage until the temperature rises again or the mode is manually cancelled.
If there is a deviation between the heater's display and the actual room temperature, press the function button 2 times and use the + or - buttons to set the actual observed room temperature. Confirm with the function button or wait for automatic confirmation.
Yes, most modern Mill heaters (Generation 3 and WiFi models) are compatible with the Mill app, available for iOS and Android, allowing you to control temperature, set schedules, and monitor power usage remotely.