1. Introduction
Thank you for choosing the Mill AB-H2000DN Oil-Filled Radiator. This electric heater is designed to provide efficient and comfortable warmth for spaces up to 28m². Featuring a modern Norwegian design, an electronic thermostat, and a Day & Night program, it offers silent and economical heating. Please read this manual thoroughly before use to ensure safe and optimal operation.
Image 1.1: The Mill AB-H2000DN Oil-Filled Radiator in a living space, illustrating its ability to provide comfortable heat throughout the room.
2. Safety Instructions
WARNING: To reduce the risk of fire, electric shock, or injury, always follow these basic precautions:
- Read all instructions before using this heater.
- Do not use this heater outdoors.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug the heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped, or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to off, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has an internal anti-tip switch and overheat protection for enhanced safety. If the heater tips over or overheats, it will automatically shut off.
- Ensure the heater is placed on a stable, level surface.
Image 2.1: The Mill AB-H2000DN Radiator showing its dimensions (42 cm width, 26 cm depth, 65.5 cm height) and key safety features like the anti-tip switch and overheat protection.
3. Setup and Installation
The Mill AB-H2000DN Oil-Filled Radiator is designed for floor mounting and comes with pre-attached aluminum feet for stability.
3.1 Unpacking
- Carefully remove the heater from its packaging.
- Check for any signs of damage during transit. If damaged, do not operate and contact customer support.
- Ensure all packaging materials are removed before use.
3.2 Placement
- Place the heater on a firm, level surface.
- Ensure there is at least 1 meter (3 feet) of clear space around the heater from any combustible materials.
- Do not place the heater directly below a power outlet.
- Avoid placing the heater in areas where it could be easily knocked over.
4. Operating Instructions
The Mill AB-H2000DN features an electronic thermostat, multiple power levels, and a programmable Day & Night function for optimized heating.
Image 4.1: The Mill AB-H2000DN Radiator's control panel, highlighting the LED screen, quick heating function, energy efficiency, Scandinavian design, and Day & Night program.
4.1 Powering On/Off
- Plug the heater into a suitable electrical outlet (240 Volts).
- Press the power button on the control panel to turn the unit on or off. The LED screen will illuminate when the heater is active.
4.2 Setting the Temperature
- Use the temperature control buttons (usually '+' and '-') to set your desired room temperature. The electronic thermostat will maintain this temperature.
- The LED screen displays the current and set temperatures for easy monitoring.
4.3 Power Levels
The heater offers three power levels to optimize energy consumption and heating speed:
- Low (800W): For maintaining warmth or heating smaller spaces.
- Medium (1200W): For general heating needs.
- High (2000W): For rapid heating of larger rooms or when quick warmth is desired.
Select the desired power level using the dedicated button on the control panel. The Mill Heat Boost Technology ensures faster and more efficient heating compared to traditional oil-filled radiators.
4.4 Day & Night Program
Utilize the Day & Night program to set different temperature levels for various times of the day, reducing energy consumption when heating is not critically needed. Refer to the detailed programming instructions in the full manual (if available) for specific steps on setting schedules and timer functions. The memory function retains your settings even after power interruptions.
5. Maintenance
Regular maintenance ensures the longevity and efficient operation of your Mill Oil-Filled Radiator.
5.1 Cleaning
- Always unplug the heater and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure no water enters the internal components.
- Clean dust from the air intake and exhaust openings using a soft brush or vacuum cleaner attachment.
5.2 Storage
- If storing the heater for an extended period, clean it thoroughly.
- Store the heater in a cool, dry place, preferably in its original packaging, to protect it from dust and damage.
6. Troubleshooting
If you encounter issues with your Mill Oil-Filled Radiator, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on | No power supply Anti-tip switch activated Overheat protection activated | Check if the plug is securely in the outlet and the circuit breaker is on. Ensure the heater is on a flat, stable surface. If it tipped, stand it upright and restart. Unplug the heater, let it cool down for 30 minutes, then plug it back in. Clear any obstructions around the heater. |
| Heater not heating effectively | Temperature setting too low Incorrect power level Room size exceeds capacity | Increase the set temperature. Select a higher power level (e.g., 2000W). Ensure the heater is appropriate for the room size (up to 28m²). |
| Unusual noises | Normal expansion/contraction Loose parts | Minor clicking or crackling sounds are normal as the metal heats and cools. If noises are loud or persistent, discontinue use and contact support. |
If the problem persists after trying these solutions, please contact Mill customer support.
7. Specifications
Detailed technical specifications for the Mill AB-H2000DN Oil-Filled Radiator:
| Feature | Specification |
|---|---|
| Brand | Mill |
| Model Number | AB-H2000DN |
| Color | White |
| Product Dimensions (L x W x H) | 42 x 13 x 67 cm (16.5 x 5.1 x 26.4 inches) |
| Item Weight | 7.95 Kilograms (17.5 lbs) |
| Power | 2000W (3 power levels: 800W, 1200W, 2000W) |
| Voltage | 240 Volts |
| Number of Speeds | 3 |
| Noise Level | 44 Decibels |
| Special Features | Electronic Thermostat, Day & Night Program, LED Screen, Timer Function, Memory Function, Anti-tip Switch, Overheat Protection |
| Heating Method | Radiant (Oil-Filled) |
| Recommended Use | Indoor (Office, Home) |
| Mounting Type | Floor Mount |
8. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Mill website. Keep your purchase receipt as proof of purchase for any warranty claims.
If you require assistance with setup, operation, or troubleshooting that is not covered in this manual, please contact Mill customer service directly.
