Onset is a global leader in data logger and monitoring solutions, best known for its HOBO and InTemp product lines used in environmental and cold chain monitoring.
Onset Computer Corporation is a market leader in the design and manufacture of data loggers and monitoring controllers. Based in Bourne, Massachusetts, Onset provides the widely used HOBO® and InTemp® data logger families, which are essential tools for a broad range of applications including building performance monitoring, renewable energy, agricultural research, and water quality management.
Their products are designed to reliably measure and record parameters such as temperature, humidity, light, energy, and soil moisture in both indoor and outdoor environments, helping professionals make data-driven decisions.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Download the HOBOconnect app (formerly HOBOmobile) on your iOS or Android device. Enable Bluetooth, ensure the logger is awake (press the button if needed), and tap the logger in the app's 'In Range' list to connect.
HOBOware is generally required for launching and reading out data from Onset's USB-based data loggers. The software is available for download on the Onset website.
For most pendant or compact loggers, open the battery compartment (often by unscrewing an end cap or removing a back plate), remove the old batteries, and insert new ones observing the polarity. Ensure o-rings are free of debris before resealing to maintain water resistance.
On compatible MX loggers, press both the Start/Stop button and the Alarm/Stats button simultaneously for 3 seconds to reset the password.
Many HOBO loggers, such as the U20 Water Level or Pendant series, are waterproof and designed for underwater deployment. However, models like the MX1101 are for indoor use only. Always check the environmental rating (IP rating) in your manual.