FlyColor is a specialized manufacturer of high-performance Electronic Speed Controllers (ESCs) for RC drones, airplanes, and boats.
FlyColor (Shenzhen FlyColor Electronic Co., Ltd.) is a leading manufacturer in the RC hobby industry, specializing in the design and production of brushless Electronic Speed Controllers (ESCs). Established with a focus on quality and performance, FlyColor provides reliable power systems for radio-controlled enthusiasts worldwide.
Their product portfolio includes the acclaimed Raptor series for multi-rotors, the X-Cross series featuring advanced 32-bit processing for racing drones, and the FlyDragon line for fixed-wing aircraft. They also manufacture waterproof ESCs designed specifically for RC boats. FlyColor products are known for their compatibility with industry-standard firmware such as BLHeli_32 and their robust build quality tailored for high-current applications.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Generally, power on your transmitter and move the throttle stick to the top position. Connect power to the ESC; wait for the initialization beeps indicating max throttle is stored. Then, move the throttle stick to the bottom position. A final set of beeps will confirm calibration. Note: Throttle calibration is typically disabled if using DShot digital signals.
Many modern FlyColor ESCs, such as the Raptor 5 and X-Cross series, use BLHeli_32 or BLHeli_S firmware. These can be configured using the BLHeliSuite software.
This may be due to desync or insufficient demagnetization time. Try increasing the 'Motor Timing' or 'Demag Compensation' settings in the ESC configuration software. Also, check for bad solder joints or damaged motor windings.
No, you must use LiPo batteries within the range specified for your specific ESC model (e.g., 3-6S) to prevent permanent damage to the electronics.
The ESC typically emits a sequence of beeps to indicate cell count (number of battery cells detected) followed by arming beeps. Continuous beeping often indicates the throttle is not at zero, or the signal issues.