Ecolink specializes in wireless security and smart home devices, offering reliable Z-Wave and Zigbee sensors, garage door controllers, and automation solutions.
Ecolink Intelligent Technology Inc. is a leading developer of wireless security and smart home solutions, delivering innovative products designed for seamless integration into modern automation ecosystems. With over 20 years of wireless engineering expertise, Ecolink produces a wide range of devices including Z-Wave and Zigbee sensors, garage door controllers, motion detectors, and flood/freeze sensors.
Their products are engineered for compatibility with major security panels and hubs, such as Honeywell, 2GIG, and SmartThings, making them a preferred choice for both professional installers and DIY smart home enthusiasts. Dedicated to reliability and battery efficiency, Ecolink ensures that homeowners can monitor and protect their properties with confidence.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
To pair the device, set your Z-Wave controller to inclusion mode (Classic or SmartStart). Power up the Ecolink controller; the status indicator will blink green. Press the 'Hub' button on the device if using Classic inclusion. Scan the QR code on the device for SmartStart inclusion.
Most Ecolink door/window sensors use a CR2032 Lithium 3V battery. Always refer to your specific model's manual to confirm the correct battery type and replacement procedure.
Generally, ensure the device is powered, then locate the reset button (often inside a pinhole). Press and hold the button for 10 seconds until the LED indicator changes behavior (usually turns red or blinks), then release to reset to factory defaults.
Yes, specific Ecolink models (often operating at 345MHz) are designed to be compatible with Honeywell and 2GIG receivers. Check the product specifications to ensure compatibility with your specific alarm panel.