Dixell specializes in electronic regulation and control solutions for commercial refrigeration, air conditioning, and heating systems.
Dixell is a global leader in the field of electronic regulation and control for refrigeration, heating, and air conditioning applications. Now a key brand under Copeland (formerly Emerson Climate Technologies), Dixell designs and manufactures advanced parametric controllers, digital thermostats, and monitoring systems used extensively in supermarkets, food service, and industrial environments.
The brand is best known for its robust series of controllers, such as the XR and XC series, which provide precise temperature management, defrost control, and energy-saving features. Dixell's technology plays a critical role in preserving perishable goods by ensuring consistent environmental conditions in display cases, cold storage rooms, and compressor racks.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Press and hold the SET key for more than 2 seconds until the value starts blinking. Use the UP or DOWN arrow keys to adjust the value, then press SET again to confirm.
Press and hold the DEF (defrost) key for more than 2 seconds. The defrost cycle will start if the temperature conditions are met.
P1 indicates a failure of the thermostat probe (room probe), while P2 refers to a failure of the evaporator probe. Check the sensor connections or replace the probe.
Press and hold both the UP and DOWN keys simultaneously for more than 3 seconds until the 'Pon' or 'On' message is displayed.
The AC parameter sets the anti-short cycle delay, which is the minimum time interval between the compressor stopping and restarting, typically used to protect the equipment.