Argon Forty Manuals & User Guides
Argon Forty makes Raspberry Pi cases and cooling accessories, with assembly guides covering enclosure setup, fan connections, thermal pads and compatible hardware.
About Argon Forty manuals on Manuals.plus
Argon Forty offers Raspberry Pi cases and cooling accessories, including the ONE V5, Argon NEO 5 and Argon POLY+5 represented in this category.
Browse manuals for case assembly, thermal pad installation, fan connections and access to board ports. Match your case version and Raspberry Pi model before following installation instructions.
For customer service, contact cs@argon40.com or visit Argon Forty's official website.
Argon Forty manuals
Selected manuals from manuals+ curated for this brand.
Argon ONE UP Laptop Quick Start Guide
Argon POLY+5 with PWM Fan Instructions Manual
Argon ONE V3 / M.2 NVMe PCIe Product Guide for Raspberry Pi 5
Argon BLSTR DAC with Ground Loop Isolator
NVMe Raspberry Pi 4 Case
Argon Forty manuals from online retailers
Argon ONE V2 Aluminum Case for Raspberry Pi 4 Instruction Manual
Argon ONE V5 M.2 Single NVME Case for Raspberry Pi 5 - Instruction Manual
Argon NEO Raspberry Pi 4 Case Instruction Manual
Argon NEO 5 M.2 NVMe PCIe Case for Raspberry Pi 5 Instruction Manual
Argon Forty Nanosound ONE Case for Raspberry Pi 4 - Instruction Manual
Argon Forty Argon ONE V3 M.2 NVME PCIE Case for Raspberry Pi 5 User Manual
Argon THRML 60mm Radiator Cooler for Raspberry Pi 5 User Manual
Argon ONE V3 M.2 NVME Expansion Board for Raspberry Pi 5 User Manual
Argon ONE V5 Case for Raspberry Pi 5 User Manual
Argon IR Remote Instruction Manual
Argon ONE M.2 Aluminum Case for Raspberry Pi 4 User Manual
Argon Forty support FAQ
Common questions about manuals, registration, and support for this brand.
-
Which Argon Forty manual should I use?
Match the case name and version, such as ONE V5, NEO 5 or POLY+5, and confirm the supported Raspberry Pi model before following the guide.
-
How do I contact Argon Forty customer service?
The supplied Argon NEO 5 guide lists cs@argon40.com for customer service.
-
What should I check when assembling an Argon NEO 5 case?
Follow the model-specific guide for thermal pad placement and fan connection. Remove the protective backing from both sides of the thermal pads and take care not to bend the Raspberry Pi 5 fan-port pins.
-
Can I use the same assembly instructions for every POLY+5 case?
Use the instructions for your cooling configuration. The listed guides include separate POLY+5 versions with a PWM fan and with THRML 30-AC cooling.
-
Where can I find warranty or registration information?
No warranty or registration page is identified in the supplied materials. Ask Argon Forty customer service or your seller for the terms applicable to your product.