Model: Bluedio T5 (could-based version)
Press and hold the MF button until you hear “Power on”.
Press and hold the MF button until you hear “Power off”.
When the headphones are all’, press and hold the MF button untll you hear “Ready to pair”.
Make the headphones enter pairing mode (see instruction “Pairing mode”), and tum on the Bluetooth feature of your phone, select “T5”.
When playing music, press the Pause/Play button once to Pause: press once again to resume.
Press once to reduce the volume; press and hold to skip to the previous track.
Press once to Increase the volume; press and hold to skip to the next track.
Answer/Reject phone calls:
Receiving an incoming call, press the MF button once to Answer; press once again to End; Press and hold for 2 seconds to refuse.
Active noise cancelling:
Push the ANC switch to tum on/off the ANC function; when it’s on, the green light will stay on.
Tum on the headphones first, then press the MF button and the Volume- button once simultaneously to select Chinese/English/French/Spanish.
Line-In music playback:
Use the standard 3.5mm Type-C audio cable to connect the headphones with your mobile phone and computer.
Note: Tum off the headphones when using this feature.
Line-out music playback:
Connect headphones 1 with your mobile phone via Bluetooth first, then tum off the ANC function end use the 3.5mm Type-C audio cable to connect headphones 1 with headphones 2.
Note: Tum off the ANC function before using this feature. The headphones 2 must support 3.5mm audio jack.
Charge the headphones:
Turn off the headphones before charging.Use the included Type-C charging cable to connect the headphones with a computer or wall charger. While charging, the red light stays on. Allow 1.5-2 hours for a full charge. Once fully charged, the blue light will stay on.
The headphones support Cloud service. Users can download the APP by scanning the QR code on the last page.
Wake up the cloud( Installed the Cloud APP on your phone)
Connect the headset with your phone, then double-click the MF button to wake up the Cloud. Cloud service is on, you can enjoy smart Cloud service.
Bluetooth version: 5.0
Bluetooth operating range: up to 33 feet (free space)
Bluetooth transmission frequency: 2.4 GHz-2.48GHz
Bluetooth profiles: A2DP~ AVRCP, HSP~ HFP
Frequency response: 15Hz-25KHz
Sound Pressure Level (SPL): 115dB
Standby time about: 1000 hours
Bluetooth music/talk time about: 32 hours
Pure ANC time about: 43 hours
Charging time: 1.5-2 hours for full charge
Operating temperature range: -1 O”C to 50″C only
Charging voltage/current: 5V/>500mA
Output power: 50mW+50mW
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the coda on our official website: www.bluedio.com for purchase verification.
Learn more and get support
Welcome to visit our official website: www.bluedio.com; Orto email us at
firstname.lastname@example.org; Or to call us at 400-889-0123.
Questions about your Manual ? Post in the comments!