Important Safety Information
- Adult assembly is required. Ensure all parts are securely fastened before use.
- This product is designed for outdoor use. Place the coop on a level, stable surface.
- Regularly inspect the coop for any loose parts, damage, or wear. Tighten fasteners and replace damaged components as needed.
- Keep children and pets away from the assembly area to prevent injury.
- Always ensure the door is locked to keep poultry secure and prevent predators from entering.
- The weatherproof cover provides UV protection and shelter from rain. Ensure it is properly secured to prevent wind damage.
Package Contents
Before beginning assembly, verify that all components listed in your product's specific parts list are present and undamaged. Refer to the included detailed instruction manual for a complete list of parts.
Image: The product is delivered in a single package, containing all necessary components for assembly.
Typical components include:
- Galvanized Steel Tubing (various lengths and shapes for frame)
- Plastic-Coated Steel Mesh (for enclosure walls)
- 420D Oxford Fabric Cover (weatherproof and UV resistant)
- Hardware (screws, bolts, clips, bungee cords for cover)
- Door Latch Mechanism
Assembly Instructions
Assembly of the PawHut Metal Chicken Coop typically requires two individuals and can be completed in approximately 2 hours. Follow the detailed step-by-step instructions provided in your product's manual for precise guidance.
- Frame Construction: Begin by assembling the galvanized steel tubing to form the main frame of the chicken coop. Ensure all connections are secure.
- Mesh Installation: Attach the plastic-coated steel mesh to the frame, ensuring it is taut and covers all open sides to create a secure enclosure.
- Door Assembly: Install the door frame and attach the mesh and latch mechanism. Verify that the door opens and closes smoothly and locks securely.
- Cover Attachment: Drape the 420D Oxford fabric cover over the top section of the frame. Secure it using the provided bungee cords or clips, ensuring it is tightly fitted to offer maximum weather protection.
Image: Diagram illustrating the dimensions and structural components of the chicken coop frame during assembly.
Image: Close-up details of the secure latch, spring button clip, galvanized steel pipe, and powder-coated steel wire mesh, highlighting key assembly points.
Image: The silver-coated 420D Oxford fabric cover, demonstrating its waterproof and UV protection features when installed on the coop.
Video: A short demonstration of the PawHut chicken coop, including its features and a brief overview of the assembly process.
Operating Instructions
This walk-in chicken run provides a secure and spacious environment for your poultry.
- Access: Use the lockable door for easy entry and exit to tend to your chickens or clean the enclosure. Always ensure the door is securely latched after use.
- Placement: Position the coop in a suitable outdoor location, ideally with some natural shade in addition to the provided UV cover.
- Shelter: The silver-coated 420D Oxford fabric cover offers protection from sun and rain, ensuring your chickens remain comfortable in various weather conditions.
- Capacity: The coop is designed to comfortably house 10 to 15 hens, providing ample space for them to roam and forage.
Image: An aerial view highlighting the spacious interior of the chicken coop, indicating its capacity for 10-15 chickens.
Image: The chicken coop shown combined with a wooden chicken coop, demonstrating its versatility for creating an extended living space for poultry.
Maintenance
Regular maintenance will extend the lifespan of your PawHut Metal Chicken Coop and ensure a healthy environment for your poultry.
- Cleaning: Periodically clean the interior of the coop and the mesh walls. The fabric cover can be wiped down with a damp cloth.
- Inspection: Routinely check all frame connections, mesh integrity, and the door latch for any signs of wear, rust, or damage.
- Cover Security: Ensure the weatherproof cover remains tightly secured, especially during windy conditions, to prevent it from dislodging or tearing.
- Ground Anchoring: Verify that the coop remains stable on its ground anchors (if applicable) to prevent shifting or tipping.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Door does not close or lock properly. | Misaligned frame or latch mechanism. Obstruction in the door path. | Check frame alignment and adjust if necessary. Clear any debris from the door path. Inspect the latch for damage. |
| Cover is loose or flapping in wind. | Bungee cords or clips are not securely fastened. | Re-secure all bungee cords and clips, ensuring the cover is taut across the frame. |
| Coop feels unstable. | Uneven ground. Loose frame connections. | Relocate the coop to a level surface. Tighten all frame bolts and connections. Ensure ground anchors are fully engaged. |
Specifications
- Model Number: D51-435V01SR
- Overall Dimensions: 340L x 300W x 190H cm (133.9" L x 118.1" W x 74.8" H)
- Material: Galvanized Steel, Plastic-Coated Steel Mesh, 420D Oxford Fabric (Polyester)
- Color: Silver (Cover)
- Capacity: 10-15 Chickens
- Special Features: Lockable Door, Spacious Interior, Weather Resistant (UV Protection, Waterproof Cover)
- Assembly Time: Approximately 2 hours (with 2 people)
Image: The fully assembled PawHut Metal Chicken Coop situated in a garden, showcasing its design and scale.
Warranty and Support
This product is manufactured by Aosom Canada. For any questions regarding assembly, missing parts, or product operation, please contact customer support.
- Manufacturer: Aosom Canada
- Place of Business: Markham, Ontario, CA
- Customer Service: Tel. 1-416-792-6088
- Return Policy: Eligible for return or refund within 30 days of receipt.
