Introduction
This manual provides essential instructions for the proper use and maintenance of your FEELNEEDY Replacement Filters and Pump Sponges, designed for the FN-W17 Cat Water Fountain. Regular replacement ensures optimal water quality for your pet.
Package Contents
- 6 x Replacement Filter Elements
- 6 x Dedicated Pump Sponges
Image: Packaging of the FEELNEEDY Replacement Filters and Pump Sponges, showing 6 filters and 6 sponges.
Compatibility
These replacement filters and pump sponges are specifically designed for use with the FEELNEEDY Cat Water Fountain model FN-W17 (108oz/3.2L capacity). Ensure your fountain model matches for proper fit and function.
Image: Diagram illustrating the compatibility of the replacement filter with the FEELNEEDY FN-W17 Pet Water Fountain, including dimensions.
Setup and Initial Preparation
Before installing a new filter, follow these steps:
- Soak the Filter: Submerge the new filter element in clean water for 5 minutes. This helps to remove any loose carbon particles and ensures optimal filtration from the first use.
- Rinse Thoroughly: After soaking, rinse the filter thoroughly under running water for at least 15 seconds.
Image: Visual guide showing the steps to soak and rinse the filter before use.
Maintenance and Replacement
Regular replacement of both the filter element and pump sponge is crucial for maintaining water quality and the longevity of your pet fountain.
Replacement Cycle
It is recommended to replace the filter element and pump sponge every 2 to 4 weeks. This frequency may vary depending on the number of pets using the fountain and the hardness of your water.
How to Replace
- Turn off and unplug the fountain.
- Disassemble the fountain components according to your specific FN-W17 fountain manual.
- Remove the old filter element and pump sponge. Dispose of them properly.
- Insert the new, pre-soaked and rinsed filter element into its designated slot.
- Place the new pump sponge around the pump.
- Reassemble the fountain, refill with fresh water, and plug it back in.
Image: Visual representation of a hand replacing the filter element in the pet water fountain.
Image: Diagram illustrating the correct placement of the pump sponge around the fountain pump.
Filtration System Details
The FEELNEEDY replacement filters feature a 4-level deep filtration system designed to provide clean and fresh water for your pets:
- High-Density Cotton: Acts as a pre-filter to intercept larger impurities like hair and debris.
- Ion Exchange Resin: Softens water by reducing calcium and magnesium ions, preventing scale buildup.
- Coconut Shell Activated Carbon: Efficiently adsorbs odors, chlorine, and other organic contaminants.
- Medical Stone: Further purifies water by absorbing bacteria and impurities.
The pump sponges provide an additional layer of pre-filtration, protecting the pump from larger particles and extending its lifespan.
Image: Exploded view diagram detailing the four layers of the filtration system: high-density sponge, ion exchange resin, activated carbon, and medical stone.
Specifications
| Feature | Detail |
|---|---|
| Brand | FEELNEEDY |
| Model Number (Filters) | FN-W17LX6 |
| Compatible Fountain Model | FN-W17 (108oz/3.2L) |
| Included Components | 6 Filters, 6 Pump Sponges |
| Material | Cotton (High-density), Ion Exchange Resin, Coconut Shell Activated Carbon, Medical Stone |
| Product Dimensions (approx.) | 0.39 x 2.76 x 7.48 inches (per filter) |
| Item Weight (total package) | 0.15 Kilograms (5.29 ounces) |
Troubleshooting
If you experience issues with water flow or quality after replacing filters:
- Check Filter Placement: Ensure the filter is correctly seated in its designated slot.
- Verify Sponge Placement: Make sure the pump sponge is properly installed around the pump.
- Rinse Again: If water flow is reduced, remove and re-rinse the filter and sponge to dislodge any trapped particles.
- Clean Pump: Refer to your fountain's instruction manual for pump cleaning procedures, as debris can accumulate over time.
Support
For further assistance or inquiries regarding your FEELNEEDY products, please refer to the contact information provided with your original FEELNEEDY Cat Water Fountain purchase or visit the official FEELNEEDY website.
Email: support@feelneedy.com