Ledvion LED String Lights 16.5M - Instruction Manual

1. Important Safety Information

Please read all instructions carefully before installation and use. Retain this manual for future reference.

• Electrical Safety: Ensure the power supply voltage matches the product's requirements (230 Volts). Do not overload the circuit. Always unplug the string lights before installation, maintenance, or when replacing bulbs.
• Outdoor Use: This product is rated IP44, making it dustproof and splashproof for outdoor use. However, avoid submerging the lights in water. Ensure all connections are secure and protected from direct water exposure.
• Installation: Do not install the string lights in a way that could damage the cable or bulbs. Avoid sharp edges or abrasive surfaces. Ensure the lights are securely fastened to prevent falling.
• Bulb Replacement: Use only E12 LED bulbs of the specified wattage (0.3W per bulb) and color temperature (2700K). Always replace bulbs with the power disconnected.
• Connection: The string lights are connectable up to a total of 1000W. Do not exceed this maximum wattage when connecting multiple sets.

2. Product Overview

The Ledvion LED String Lights are designed to provide warm, ambient lighting for outdoor and indoor spaces. This non-dimmable model features 30 E12 LED bulbs, offering a warm white light at 2700 Kelvin.

Components Included:

• 1x Ledvion LED String Lights (16.5 meters with 30 E12 LED bulbs)
• 2x Spare E12 LED bulbs
• 1x 3-meter power cable with plug

Key Features:

• Length: 16.5 meters
• Bulbs: 30 E12 LED bulbs (0.3W each)
• Color Temperature: 2700K Warm White
• Power: 9 Watts total
• Luminous Flux: 900 Lumens
• Protection Rating: IP44 (Dustproof and Splashproof)
• Voltage: 230 Volts
• Connectable: Up to 1000W total

Image 1: Ledvion LED String Lights. This image displays the string lights with their bulbs illuminated, and a remote control for illustrative purposes, though this specific model is non-dimmable.

Image 2: Close-up of a single E12 LED bulb. This image shows the clear glass bulb and its base, attached to the black string light cable, against a blurred green background.

3. Setup

Follow these steps for safe and proper installation of your Ledvion LED String Lights.

1. Unpack: Carefully remove the string lights and all components from the packaging. Inspect for any damage.
2. Plan Placement: Determine the desired location for your string lights. Ensure the 3-meter power cable can reach a suitable electrical outlet without tension.
3. Mounting: Securely hang the string lights using appropriate hooks, clips, or ties. Ensure the cable is not stretched or subjected to undue stress. The integrated loops on each bulb socket can be used for hanging.
4. Bulb Installation (if necessary): The bulbs are typically pre-installed. If any bulbs need to be installed or replaced, gently screw them into the E12 sockets until snug. Do not overtighten.
5. Connect to Power: Once the string lights are securely installed and all bulbs are in place, connect the 3-meter power cable to a standard 230V electrical outlet.
6. Connecting Multiple Sets (Optional): If connecting multiple sets, ensure the total wattage does not exceed 1000W. Connect the end of one string to the beginning of the next.

4. Operating Instructions

This Ledvion LED String Light model is non-dimmable and operates with a simple on/off function.

• Power On: Plug the power cable into a 230V electrical outlet. The lights will illuminate immediately.
• Power Off: Unplug the power cable from the electrical outlet to turn off the lights.

Note: This specific model (LVO10097-dim) is non-dimmable. Any remote controls or dimmers shown in product imagery are for other variants and are not compatible with this non-dimmable version.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your string lights.

• Cleaning: Disconnect from power before cleaning. Wipe the bulbs and cable with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Bulb Replacement: If a bulb fails, unplug the string lights from the power source. Carefully unscrew the faulty bulb and replace it with one of the provided spare bulbs or a compatible E12 LED bulb (0.3W, 2700K).
• Storage: When not in use for extended periods, unplug the lights, clean them, and store them in a cool, dry place, preferably in their original packaging, to prevent tangling and damage.
• Inspection: Periodically inspect the cable, plug, and bulb sockets for any signs of wear, damage, or corrosion. If any damage is found, discontinue use and replace the damaged component or the entire string if necessary.

6. Troubleshooting

If you encounter issues with your Ledvion LED String Lights, refer to the following common problems and solutions:

7. Specifications

Detailed technical specifications for the Ledvion LED String Lights (Model LVO10097-dim).

Image 3: Ledvion Energy Label. This label indicates the energy efficiency class of the product. For more details, scan the QR code or visit the EPREL database.

8. Warranty and Support

For warranty information or technical support, please contact Ledvion directly or refer to the retailer's return policy. Specific warranty details are not provided in this manual.

For further assistance, please visit the official Ledvion website or contact their customer service department.