Ledvion Outdoor Wall Light with Sensor

Installation Diagram Description

The installation diagram illustrates the assembly of the Ledvion Outdoor Wall Light with Sensor. Key components and steps are indicated:

• Part 1: Mounting plate with screw holes for wall attachment.
• Part 2: Wall bracket, likely connecting the fixture to the mounting plate.
• Part 3: Terminal block for electrical connections (Live, Neutral, Earth).
• Part 4: The main body of the light fixture, housing the electrical components and lamp holder.
• Part 5: E27 lamp socket, where the light bulb is inserted.
• Part 6: A protective glass cylinder or diffuser, which is attached to the base of the fixture, often by screwing it on.

The diagram also shows fixings (indicated as 4x) and electrical wiring connections.

Installation Instructions

Installation should only be performed by individuals with electro-technical knowledge and experience.

This product is not suitable for installation in locations near the sea or in environments with a corrosive atmosphere.

Safety First: Ensure the main power source is turned off before commencing installation. Secure the power source against accidental reactivation.

Connections: Connect the device to the mains supply using the provided terminal block. Ensure all cables are securely connected to the correct terminals (e.g., L, N, Earth).

Testing: After completing the installation, activate the power source and test the function of the light and sensor.

Care and Maintenance

Before cleaning, disconnect the unit from the power supply if necessary. Avoid using aggressive cleaning agents.

If you encounter any defects or have a complaint, please return the product to the retailer where it was purchased, along with your proof of purchase.

Ledvion is not liable for damage resulting from incorrect handling, improper use, or normal wear and tear. Technical modifications for product improvement are reserved.

General Safety Information

Please read this manual carefully before use and keep it for future reference.

Use the product only for its intended purpose as described in this manual.

Do not use the product if any part is damaged or defective. Replace damaged or defective products immediately.

This product is not intended for use by children without adult supervision. Children should not play with the device.

Do not modify the product in any way.

Environmental Protection:

• Do not expose the product to water or moisture (IP 20 rating).
• Do not immerse the product in water (IP 44-IP 67 ratings apply to specific models, check product details).
• Keep the product away from heat sources.
• Do not block ventilation openings.

Usage Precautions:

• Do not look directly into the LED lamp.
• Maintain a minimum distance of 1 meter between the lamp and the surface being illuminated.

Electrical Safety

To reduce the risk of electric shock, this product should only be opened by an authorized technician for servicing.

Do not use the product if the cable or plug is damaged or defective. If damaged, it must be replaced by the manufacturer or an authorized repair agent.

Always ensure the voltage matches the rating plate on the device before use.

Ensure the power cable does not hang over the edge of a work surface where it could be accidentally caught or cause a tripping hazard.

Warnings

The light source in this luminaire must only be replaced by the manufacturer, their service agent, or a similarly qualified person.

Caution: Risk of electric shock.

The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed.

Disposal

This product is designated for separate collection at an appropriate collection point. Do not dispose of it with household waste. Contact your local authority or retailer for information on proper disposal.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands, and product names are trademarks or registered trademarks of their respective holders.

For more information about Ledvion and its products, please visit www.ledvion.com.

Documentation and Compliance

This product has been manufactured and supplied in compliance with all relevant regulations and directives valid for European Union member states. It complies with all applicable specifications and regulations in the country of sale.

Formal documentation, including the Declaration of Conformity, Material Safety Data Sheet, and product test reports, is available upon request.

CE Declaration: This product complies with the following directives:

• LVD: 2014/35/EU
• EMC: 2014/30/EU
• RoHS: 2011/65/EU
• RED: 2014/53/EU (for products with radio transmitter units)

The complete Declaration of Conformity (DOC) can be found on the Ledvion website.