1. Introduction
Thank you for choosing the WOLFBOX 3000A Jump Starter with Portable Tire Inflator. This device combines a powerful jump starter for vehicles with a versatile tire inflator, providing an essential tool for roadside emergencies and routine maintenance. Please read this manual thoroughly before use to ensure safe and optimal operation.
2. Important Safety Information
WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Do not operate the device if it is damaged.
- Keep out of reach of children.
- Do not expose the device to rain or wet conditions.
- Ensure proper ventilation during use.
- Do not short-circuit the jump starter clamps.
- Always connect the positive (+) clamp to the positive (+) terminal and the negative (-) clamp to the negative (-) terminal or vehicle chassis.
- Disconnect the clamps in reverse order after starting the vehicle.
- Avoid over-inflating tires. Always check the recommended tire pressure.
- Do not leave the tire inflator unattended during operation.
- Store the device in a cool, dry place when not in use.
3. Package Contents
Verify that all items are present in your package:
- WOLFBOX 3000A Jump Starter Unit
- Portable Tire Inflator Unit
- Smart Jumper Cables
- USB-C Charging Cable
- 12V DC Car Charger
- Air Hose with Screw-on Chuck
- Various Nozzle Adapters (e.g., needle valve, plastic nozzle)
- Storage Bag for Jump Starter
- Storage Bag for Tire Inflator
Image 1: Overview of the WOLFBOX 3000A Jump Starter and Portable Tire Inflator with included accessories.
Image 2: The WOLFBOX 3000A Jump Starter unit, smart jumper cables, USB-C cable, and storage case.
Image 3: The WOLFBOX Portable Tire Inflator unit, air hose, 12V car charger, USB-C cable, and various nozzle adapters.
4. Product Overview
4.1. WOLFBOX 3000A Jump Starter
The jump starter features a robust design with an integrated LED display and multiple ports for charging and power output.
- LED Display: Shows battery percentage, status indicators (START, OUT, IN, LOW).
- BOOST Button: For emergency jump starts on deeply discharged batteries.
- Power Button: Turns the unit on/off and cycles flashlight modes.
- USB Output Ports: For charging mobile devices.
- USB-C Input/Output Port: For charging the jump starter or external devices.
- Jump Start Port: Connects to smart jumper cables.
- LED Flashlight: Provides illumination with multiple modes.
4.2. Portable Tire Inflator
The tire inflator is compact and features a digital display for precise pressure readings and controls.
- Digital Display: Shows current pressure, target pressure, and selected mode.
- Mode Button (M): Cycles through preset inflation modes (sedan, motorcycle, bike, ball) and custom mode.
- Pressure Unit Button (PSI): Changes pressure units (PSI, BAR, KPA, Kg/cm²).
- Power/Start/Stop Button: Turns the unit on/off and starts/stops inflation.
- +/- Buttons: Adjusts target pressure in custom mode.
- Air Hose Connection: For attaching the air hose.
- USB-C Input/Output Port: For charging the inflator or external devices.
- DC Input Port: For 12V car charger connection.
5. Setup and Initial Charging
5.1. Charging the Jump Starter
Before first use, fully charge the jump starter. It is recommended to charge the unit every 3-6 months to maintain battery health.
- Connect the USB-C charging cable to the jump starter's USB-C port.
- Connect the other end of the USB-C cable to a 65W fast charger (not included) or a standard USB wall adapter.
- The LED display will show the charging progress. The unit is fully charged when the display shows 100%.
Image 4: The WOLFBOX 3000A Jump Starter connected to a charger, illustrating its fast charging capability.
5.2. Charging the Tire Inflator
The portable tire inflator can be charged via USB-C or the 12V DC car charger.
- USB-C Charging: Connect the USB-C cable to the inflator's USB-C port and a USB power source.
- 12V DC Car Charging: Connect the 12V DC car charger to the inflator's DC input port and then to your vehicle's cigarette lighter socket.
- The digital display will indicate charging status.
6. Operating Instructions
6.1. Using the Jump Starter
This jump starter is designed for 12V vehicles, including gasoline engines up to 8L and diesel engines. Ensure the jump starter is at least 50% charged before use.
- Connect Jumper Cables: Insert the smart jumper cable plug into the jump start port on the WOLFBOX unit.
- Connect to Battery:
- Connect the RED positive (+) clamp to the vehicle battery's positive (+) terminal.
- Connect the BLACK negative (-) clamp to the vehicle battery's negative (-) terminal or a solid, unpainted metal part of the vehicle chassis away from the battery.
The smart cable indicator light will show status (e.g., solid green for ready, flashing red for error).
- Start Vehicle: Once the smart cable indicates readiness (solid green light), start your vehicle's engine.
- Disconnect: After the engine starts, immediately disconnect the jumper cables from the vehicle battery, first the negative (-) clamp, then the positive (+) clamp. Then, disconnect the smart cable from the jump starter unit.
Note: If the vehicle does not start after 3 attempts, stop and check for other issues. Do not crank the engine for more than 3 seconds per attempt.
Image 5: The WOLFBOX 3000A Jump Starter connected to a vehicle battery, demonstrating its use for various vehicle types.
6.2. Using the Portable Tire Inflator
The inflator supports up to 150 PSI and has a 35 L/Min airflow. It is suitable for sedans, motorcycles, bikes, and balls.
- Connect Air Hose: Screw the air hose onto the inflator's air outlet. Attach the appropriate nozzle adapter if needed (e.g., for bikes or balls).
- Connect to Tire Valve: Securely attach the air hose chuck to the tire valve stem. Ensure a tight seal to prevent air leakage.
- Power On: Press the Power button to turn on the inflator. The digital display will show the current tire pressure.
- Select Mode/Set Pressure:
- Press the Mode (M) button to cycle through preset modes (sedan, motorcycle, bike, ball). Each mode has a default target pressure.
- Alternatively, use the +/- buttons to manually set your desired target pressure.
- Press the PSI button to change pressure units (PSI, BAR, KPA, Kg/cm²).
- Start Inflation: Press the Power/Start/Stop button to begin inflation. The inflator will automatically stop when the target pressure is reached.
- Disconnect: Once inflation is complete, quickly disconnect the air hose from the tire valve and then from the inflator.
Caution: The inflator is not suitable for RVs, pickup trucks, or large SUVs.
Image 6: The WOLFBOX Portable Tire Inflator connected to a car tire, demonstrating its quick inflation capability.
Image 7: The WOLFBOX Portable Tire Inflator illustrating its dual power options: cordless operation via internal battery and continuous power via a 12V DC cigarette lighter connection.
Image 8: The WOLFBOX Portable Tire Inflator demonstrating its capacity to inflate multiple bicycle tires, motorcycle tires, balls, and sedan tires on a single charge.
6.3. Using the LED Flashlight (Jump Starter)
The jump starter includes a 200-lumen LED flashlight with multiple modes.
- Turn On: Press and hold the Power button for 2 seconds to turn on the flashlight.
- Change Modes: Short press the Power button to cycle through modes: Constant Light → SOS → Strobe → Off.
- Turn Off: Press and hold the Power button for 2 seconds, or cycle through all modes until it turns off.
Image 9: The WOLFBOX 3000A Jump Starter with its integrated 200-lumen LED flashlight providing illumination.
6.4. Using as a Power Bank (Jump Starter & Tire Inflator)
Both units can charge external USB devices.
- Connect your device's USB charging cable to one of the USB output ports (Jump Starter) or the USB-C port (Tire Inflator).
- The unit will automatically begin charging your device.
7. Maintenance
- Recharge Regularly: To prolong battery life, fully charge both units every 3-6 months, even if not used.
- Cleaning: Wipe the units with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the devices in a cool, dry place, away from direct sunlight, moisture, and flammable materials. Keep them in their protective cases when not in use.
- Temperature: Avoid storing or operating the devices in extreme temperatures.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jump Starter not turning on/charging. | Low battery; faulty charging cable/adapter. | Charge the unit fully. Try a different USB-C cable and adapter. |
| Vehicle not starting with jump starter. | Incorrect clamp connection; jump starter battery too low; vehicle battery completely dead; other vehicle issues. | Ensure clamps are connected correctly (+ to +, - to -). Fully charge the jump starter. Use BOOST function if battery is very low. Consult a mechanic if vehicle still won't start. |
| Tire Inflator not inflating. | Air hose not securely connected; low battery; target pressure not set; inflator not powered on. | Ensure air hose is tightly screwed on. Charge the inflator. Set a target pressure. Press the Power/Start button. |
| Inaccurate pressure reading on inflator. | Loose connection to tire valve. | Ensure the air chuck is firmly attached to the tire valve stem. |
| Flashlight not working. | Unit not powered on; low battery. | Press and hold the Power button. Charge the jump starter. |
9. Specifications
9.1. WOLFBOX 3000A Jump Starter
- Peak Current: 3000A
- Battery Capacity: 16000mAh
- Start Voltage: 12V
- Applicable Vehicle Types: Gasoline engines up to 8.0L, Diesel engines
- Input: USB-C (65W Fast Charge compatible)
- Output: USB-A, USB-C
- Flashlight: 200 Lumens (Constant, SOS, Strobe)
- Protection Rating: IP64
- Safety Protections: Spark-proof, reverse polarity, over-current, over-voltage, low/high-temperature, etc. (10 types)
9.2. Portable Tire Inflator
- Max Pressure: 150 PSI
- Airflow Rate: 35 L/Min
- Inflation Speed: Refills 195/65/R15 tire from 29 to 36 PSI in approximately 1 minute.
- Battery Capacity: 12000mAh (for cordless operation)
- Power Input: USB-C, 12V DC Car Charger
- Pressure Units: PSI, BAR, KPA, Kg/cm²
- Preset Modes: Sedan, Motorcycle, Bike, Ball, Custom
- Features: Auto Shut-Off, Digital Display
10. Warranty and Support
WOLFBOX products are designed and manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please refer to the warranty card included with your product or visit the official WOLFBOX website. Please have your model number and purchase details ready when contacting support.
WOLFBOX Official Website: www.wolfbox.com
