WOLFBOX MegaVolt24 User Manual

V1.0

Drive on. Always on.

For more information, visit: wolfbox.com

Precautions

  • Thank you for choosing the WOLFBOX Jump Starter. To ensure a good user experience, personal safety, and property security, please carefully read all instructions before using this product, and keep this manual for reference.
  • It is recommended to charge the product before initial use!
  • While reading this manual, you can start charging the MegaVolt24 with the included charger or wall charger.

Warning:

This device is designed for vehicles (equipment) with 12V batteries. Using it with other types of batteries may pose a risk. Please read and understand the safety information before use.

Packing List

  • Jump Starter Host machine
  • Jumper Cable
  • USB-C to USB-C Cable
  • 65W USB C Wall Charger
  • EVA Pack
  • User Manual

LED Display Instructions

The LED display provides the following information:

  • 1 Battery Percentage: Displays the current battery level.
  • 2 Fast Charging Mode for Jump Starter: Indicates fast charging status.
  • 3 Reverse Polarity Alarm: Alerts if the clamps are connected incorrectly.
  • 4 Low Voltage: Indicates the battery voltage is too low.
  • 5 Input: Shows charging input status.
  • 6 Output: Shows power output status.
  • 7 Car is Ready to Start / BOOST Start: Indicates the vehicle is ready for a jump start or in BOOST mode.

Parts and Functions Introduction

Top View:

  • 1 Power Button / LED Button: Used to turn the device on/off and control LED light modes.
  • 2 BOOST Button: Engages the BOOST start function.
  • 3 LED Flashlight: Provides illumination.
  • 4 USB-A Input/Output Port: For charging devices and input.
  • 5 USB-C Output Port: For charging devices.

Bottom View:

  • 6 LED Display Screen: Shows device status.
  • 7 12V Car Start Port: Port for connecting the jumper cables to the vehicle battery.

Feature 1: How to Start a 12V Vehicle (Ensure Battery Level >50%)

Normal Start

Caution: Do not press the BOOST button before properly connecting to the vehicle battery.

  1. Press and hold the power button for 2 seconds to turn on MegaVolt24.
  2. Ensure that the MegaVolt24 battery level is not below 50%.
  3. Attach the red clamp to the positive (+) terminal of the battery and the black clamp to the negative (-) terminal. Green light displays "START".
  4. Start the vehicle.
  5. Remove the clamps and press and hold the power button for 2 seconds to turn off MegaVolt24.

BOOST Start

  1. When unable to use the regular start function, press and hold the BOOST button for 2 seconds. MegaVolt24 will power on. Green light displays "START".
  2. Ensure that the MegaVolt24 battery level is not below 50%.
  3. Attach the red clamp to the positive (+) terminal of the battery and the black clamp to the negative (-) terminal.
  4. Start the vehicle.
  5. Remove the clamps and press and hold the power button for 2 seconds to turn off MegaVolt24.

Caution:

  1. Use the BOOST function only if normal vehicle start procedures fail. Avoid activating BOOST when the vehicle voltage is <9V or when regular start features are operational.
  2. If the start light goes off during boost, it means the jumper cables aren't connected well. Check and secure the clamps before restarting the vehicle.

Feature 2: LED Light Mode Switching

  1. After pressing and holding the power button for 2 seconds, short press the power button to activate the LED light function.
  2. Short presses will cycle through different lighting modes: steady, white strobe, SOS.

Tip: LED flashlights cannot be used without turning on the device.

Feature 3: Charging Mobile Devices/Tablets, etc

  1. Connect the USB plug of the adapter cable to the main unit's USB-A/USB-C output port.
  2. Connect the charging adapter to your mobile device/tablet or other electronic products.
  3. Press and hold the power button for 2 seconds to turn on the device and initiate charging for your mobile device/tablet.

Tip: Charging is only possible when the device is turned on.

Feature 4: Charging the Product Main Unit

  1. Plug the provided fast charger or a compatible charger into a power outlet.
  2. Insert the plug of the fast charger or a household charger into the USB-C input port of the MegaVolt24 main unit.

* It is recommended to use the provided cable.

Automatic Shutdown Mechanism:

To preserve the startup power source, an automatic shutdown mechanism is implemented during prolonged periods of inactivity.

  1. If the device is turned on, it will automatically shut down after 4 hours.
  2. If the device is not in use, it will automatically shut down after 2 minutes of standby.

Automatic Power-on Mechanism:

When switched off and the MegaVolt24 and your car are connected normally, the MegaVolt24 will automatically turn on.

Technical Specifications

ModelMegaVolt24Battery Capacity88.8WH/ 24000mAh
Starting Current1000APeak Current4000A
USB-C Input/OutputPD65W(5V/3A, 9V/3A, 12V/3A, 15V/3A/, 20V/3.25A)USB-A OutputQC3.0 18W (5V/3A, 9V/2A, 12V/1.5A)
Operating Temperature-20°C ~ 60°C / -4°F ~140°FFull Charge TimeApproximately 1.5-2 hours
Weight2.9lbDimensions (L*W*H)9.33 x 3.86 x 1.5inches

Frequently Asked Questions (FAQ)

  • How to turn off the portable power source? Press and hold the power button for 2 seconds to power off, or it will automatically shut down after 2 minutes of standby.
  • How long does it take to charge the MegaVolt24 main unit? You can use the provided 65W fast charger for charging, and it takes only 1.5 hours to charge the MegaVolt24.
  • Does this unit come with a charger for the jump starter? Is the USB-C port Power Delivery, and if so, what's the wattage? Yes, MegaVolt24 includes a 65W fast charger with a USB-A output port and a 65W Power Delivery port. You can use it to charge any electronic device.
  • How many times can MegaVolt24 start a car? It can consecutively start a car approximately 40 times.
  • What is the lifespan of MegaVolt24? Under normal usage conditions, it can last 3-5 years.
  • If MegaVolt24 is fully charged but not in use, how long can it still start a car? The circuit design of MegaVolt24 is scientifically engineered. It can be stored for 6-12 months without use, but for an extended lifespan, it is recommended to charge it every 3 months.
  • How to know if MegaVolt24 is charging when plugged in? MegaVolt24 comes with an LED screen that displays the charging status.
  • What is the maximum and minimum temperature that this jumper cable can withstand? Can I leave it in my car during both summer and winter? The jump starter can be stored between -20°C to 60°C / -4°F to 140°F, allowing you to leave it in your car during both summer and winter without any issues.
  • What is the best way to stow this item? MegaVolt24 comes with a carrying bag. You can conveniently store it in this bag for easy use and portability.

Troubleshooting

LED DisplayReasonOperation
Display in "red"
[ERROR]
Jumper cables connected with reversed polarity to the carConnect the battery clamps to the correct positive and negative terminals
Display in "yellow"
[LOW]
Correctly connected car battery, but battery voltage is below 9V, and the core temperature is above 0°C/32°FBOOST button for 2 seconds to use the forced boot function
"OUT&IN" flashing
[OUT][IN]
High-temperature protection activated, displaying core temperature overheatingWhen the core temperature reaches 55°C/131°F, the product activates temperature protection. Once the temperature drops to 45°C/113°F, it can resume output.
"IN" flashing
[IN]
Low-temperature protection activated, displaying core temperature too lowWhen the core temperature drops below -20°C/-4°F, the product activates temperature protection. It can resume output when the temperature rises to 0°C-3°C/32°F-37.4°F.
Buzzer sounding, silence after 30 secondsOvercurrent detected, stop starting vehicle, disappear for 30SStop starting the vehicle, the safety mode will disappear after 10 minutes.
"Start" flashing
[START]
Within 10 minutes, if the vehicle is started more than 4 times, the buzzer will sound, and after 30 seconds, the buzzer will be silenced. The 'START' will continue to flash.Stop starting the vehicle, the safety mode will disappear after 10 minutes.

Warning

WOLFBOX Two (2) Year Limited Warranty

  • Carefully read the user manual before using this product.
  • Do not substitute for car batteries.
  • Do not use it as a toy.
  • Close supervision is required when using this product near children to reduce the risk of injury.
  • The product is intended for 12V vehicle starting; using it for other purposes may pose risks.
  • Use the provided battery clamps; cease use if clamps or wires are damaged to avoid fire, electric shock, or personal injury.
  • Do not short-circuit the positive and negative terminals of the battery clamps.
  • Before starting, ensure the interface is free from rust and foreign objects. Connect the main unit securely to the battery clamps to avoid startup performance issues.
  • Remove the product from the car battery within 30 seconds after successfully starting the vehicle to prevent damage.
  • Do not start more than 3 times consecutively to avoid overheating and potential damage. Wait two minutes between each start during multiple starts.
  • Do not use clamps to power other devices.
  • Do not expose the product to environments exceeding 60°C.
  • Charge the product at an ambient temperature ranging from 0°C to 45°C.
  • Do not immerse the product in water.
  • Keep the product away from extremely hot conditions or fire.
  • Do not operate the product in explosive environments with flammable liquids, gases, or dust.
  • Ensure that someone is within hearing distance or capable of assisting when using the product.
  • Remove metal jewelry such as rings, bracelets, and necklaces before using the product.
  • To reduce the risk of damage to the power plug and cable, disconnect the main unit from the clamps at the plug location.
  • Do not use damaged or modified battery packs; unpredictable consequences may occur, leading to risks such as fire, explosion and injury.
  • Use the provided charger or a charger with the same specifications as the main unit's input for charging.
  • Do not charge the product immediately after starting a vehicle.
  • Do not start the vehicle while charging the main unit.
  • In extreme cases, battery leakage may occur. Do not touch the leaked substance with bare hands or skin. If contact occurs, wash with soap and water. If it enters the eyes, rinse with cold water for at least 10 minutes and seek medical attention immediately.
  • Dispose of products using lithium batteries by local regulations at the end of their service lifespan.

Customer Service Center

If you have any problems with the function or installation, please feel free to reach us.

Help Center: [QR Code for Help Center]

WhatsApp: [QR Code for WhatsApp]

Follow us on social media:

  • Instagram
  • Facebook
  • YouTube
  • WOLFBOX

For more information:

Models: MegaVolt24, MegaVolt24 4000A Jump Starter, 4000A Jump Starter, Jump Starter, Starter

File Info : application/pdf, 20 Pages, 1.56MB

PDF preview unavailable. Download the PDF instead.

Wolfbox-jump starter User Manual-2024 02 20 ?v=1709259065

References

Adobe PDF Library 17.0 Adobe InDesign 19.2 (Macintosh)

Related Documents

PreviewWOLFBOX Jump Starter with Air Compressor User Manual
Comprehensive user manual for the WOLFBOX Jump Starter with Air Compressor, covering models MegaVolt 16 Air and MegaVolt 24 Air. Learn about features, operation, safety precautions, and troubleshooting.
PreviewWOLFBOX MegaVolt Jump Starter & Air Compressor User Manual
Comprehensive user manual for the WOLFBOX MegaVolt16 Air and MegaVolt24 Air Jump Starter with Air Compressor, detailing product features, operation instructions, technical specifications, troubleshooting, and safety warnings for optimal use and maintenance.
PreviewWOLFBOX MegaVolt16 3000A Jump Starter User Manual
User manual for the WOLFBOX MegaVolt16 3000A jump starter. Covers vehicle jump-starting, LED functions, device charging, technical specifications, troubleshooting, and safety guidelines.
PreviewWOLFBOX Jump Starter with Air Compressor User Manual
Comprehensive user manual for the WOLFBOX MegaVolt 16 Air / MegaVolt 24 Air jump starter and air compressor, detailing features, operation, and safety precautions.
PreviewWolfbox EV App User Guide: Download, Setup, and Usage
Comprehensive guide to downloading, installing, and using the Wolfbox EV mobile application for managing your EV charger, including setup, charging modes, data tracking, and device sharing.
PreviewWOLFBOX EV Charger User Manual: Installation, Operation, and App Guide
Comprehensive user manual for the WOLFBOX EV Charger, covering installation, operation, app usage, troubleshooting, and after-sales support. Includes safety warnings and product specifications.
PreviewWOLFBOX X3 2-Channel Dash Cam User Manual
This user manual provides comprehensive instructions and specifications for the WOLFBOX X3 2-channel dash cam, covering installation, features, troubleshooting, and app connectivity.
PreviewWOLFBOX EV Charger FAQs and Troubleshooting
Frequently asked questions and troubleshooting guide for the WOLFBOX EV Charger, covering installation, Wi-Fi connectivity, app usage, and charging performance.